SolidPup 5.1.1-B Lite and OBXF

For talk and support relating specifically to Puppy derivatives
Post Reply
Message
Author
User avatar
Tman
Posts: 808
Joined: Sat 22 Jan 2011, 21:39
Location: Toronto

#91 Post by Tman »

CatDude,

Indeed, your pet has fixed the issue with ice_config.sh. The menuitem for it can be re-enabled with Pmenu.
Fantastic work, CatDude! Thanks very much. :)

User avatar
Tman
Posts: 808
Joined: Sat 22 Jan 2011, 21:39
Location: Toronto

#92 Post by Tman »

MERRY CHRISTMAS and HAPPY HOLIDAYS everyone!!!

User avatar
darkcity
Posts: 2534
Joined: Sun 23 May 2010, 19:16
Location: near here
Contact:

#93 Post by darkcity »

8) happy xmas

solid added to the big puppy list

oligin10
Posts: 193
Joined: Sat 17 Jul 2010, 15:47
Location: Buckeye State, USA

Final Release?

#94 Post by oligin10 »

Hi Tman, just checking to see if you were still going to do a final release for this. I noticed in Saluki postings that you were going to be scaling back. If you are not, could you please let us know? Thanks for all your contributions to Puppy and all your hard work. Thanks, Rob

User avatar
Tman
Posts: 808
Joined: Sat 22 Jan 2011, 21:39
Location: Toronto

#95 Post by Tman »

Hi Rob and all,

Yes, I will wrap things up with Solidpup and then divert my full attention to my new project. I will see if I can work on it some more this weekend.

I am not really leaving Puppy, just I won't have as much free time for it as I used to.

charbaby66
Posts: 75
Joined: Sat 10 May 2008, 09:40

SolidPup rocks on 64mb Toshiba laptop

#96 Post by charbaby66 »

Tman, this late arrival and fan of your work will miss you already!

I may see if your other project works on my IBM T41 lappy but the
inverter or something vid-wise is hooped and although I can use ext.
monitor I find it annoying to crane my head when using it, and havent
been playing on it,. Whichever comes first - patience, repair or
replacement, I will let you know if Saluki works for me - I love the
logo!! Very classy, as much else I have seen from you.

Ok ..I started with a Toshiba Satelite 490cdt - 64mb ram, 3.4G hd,
(incl.512M Linux swap) a buggy S3 2mb vid card, which I loved due to
how solidly it is built -has the dock, and ext. floppy.. My pet project was
getting Puppy on it - ran most versions tried- some slow, but they go!
But the memory and vid card were hurting me.

I just found a 4060XCDT for $20, hoped I could add memory from the
other but the chip was dead- so this lil rescue is a Pll 233 w/64mb
XP bloating 3.5 of the 6G hd, using 512mb Linux swap, Trident 2MB
vid. card. 5.28 works great actually, but too big so too slow, and I
haven't found a cutdown version yet so looked around.

Compared to the other lite pups I have tried - SolidPup is the best
(Note to those of us with old old dogs: I need to use PLoP to boot
from USB with this bios, and add to my config file the " pfix=nocopy
pmedia=cd" to a) boot from USB and b) load the savefile, but only
have nosmp from frugal without issue) I may wipe everything soon
and try a full install to see if it speeds up FF or SM, but it zips very
well w/Dillo.

X detects video cleanly @ 1024x768 16 Bit. Country settings work
and are persistant, and has the locale files needed.

Network settings are not persistant, but are retained in IC Wizard
so I need to scan for my network each time at home to get connected
but my LinksysW54GUSB was detected and rt73usb loaded by default.
Funny thing, I took it into work to show off Puppy on this, booted w/
savefile, found that IC Wizard auto detected and connect to the only
no-password!!wireless connection in the bldg..yeah for me, but shame
on them!!

One thing I liked was the way conky was setup in Akita. I miss that in
Solid, but I use Htop for the moment, I will look into what I can do later
Unlike Akita, in Solid and Warytiny I have sound on 1st boot. Much faster
than Snow or Ice Pup but still appealing..

I was hoping for a sm. flash capable browser, FF SM are far too slow, SM
kills me w/error popups too, Firepup/FDog are too old for YT. Midori/flash
is also broken in the other wary based pups, and I think the 420 based
ones too. It seemed fast until it hung somewhere.. I heard Arora is good.
I updated the repos, but no love, I will poke around ibiblio etc. for pets
but if no luck will stick w/Dillo actually flies esp. compared to SM and FF
and is much prettier than the text based browsers, but I can't log in to
Hotmail (forget the error -no flash or java maybe). Sorry doubt I will
ever want to print from this beast, so not sure but think it would work
just fine if I did..

All in all SolidPup made this POS laptop run very well, I thank you
for your hard work, and sharing of your time. I am happily posting
from it right now :) Will let you know about Saluki in the future.

Take care!

oligin10
Posts: 193
Joined: Sat 17 Jul 2010, 15:47
Location: Buckeye State, USA

Thanks

#97 Post by oligin10 »

Hi Tman, thanks for the update. Looking forward to trying it out, Rob

User avatar
Tman
Posts: 808
Joined: Sat 22 Jan 2011, 21:39
Location: Toronto

#98 Post by Tman »

Thanks charbaby66 for the nice letter :)
I helped get Saluki going but it is mostly Jemimah's work.

I have uploaded SolidPup 5.1.1-Final. A lighter 97MB version with Tint2 panel is also available.

I will still be around in the puppy forum, but I don't intend to make any new pups for a long time and these are the last versions to be based on Wary 5.1.1.

Image
Last edited by Tman on Mon 16 Jan 2012, 06:28, edited 4 times in total.

scsijon
Posts: 1596
Joined: Thu 24 May 2007, 03:59
Location: the australian mallee
Contact:

#99 Post by scsijon »

good luck Tman and thanks for all the work!

oligin10
Posts: 193
Joined: Sat 17 Jul 2010, 15:47
Location: Buckeye State, USA

SolidPup Final

#100 Post by oligin10 »

Thanks Tman, that was fast. Thanks again for all you have done for Puppy Linux. Thanks, Rob

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#101 Post by Lobster »

I helped get Saluki going but it is mostly Jemimah's work.
One day we both might be able to use woof2 :wink:

Saluki is emerging into something unique
as Jemimah develops her unique style
http://puppylinux.org/wikka/Saluki

You did good, it is the Puppy way . . .

Hope your influence continues.
Maybe some new 'SolidPup 2' will be a derivative of the completed Saluki . . . who knows :)

Fare thee Well
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
Tman
Posts: 808
Joined: Sat 22 Jan 2011, 21:39
Location: Toronto

#102 Post by Tman »

You're welcome and thank you guys for the good luck.
Lobster wrote: One day we both might be able to use woof2 :wink:
Yes, I haven't mastered woof2 yet; I have only used woof (1) so far.
Some may be thinking something along the lines of :? and :roll:. What can I say? Sorry, the tutorial will have to wait.

User avatar
Tman
Posts: 808
Joined: Sat 22 Jan 2011, 21:39
Location: Toronto

#103 Post by Tman »

Recently, I discovered that after the last time I modified my Firefox packages, Flash-chess would no longer run with it, whereas it would run fine in Seamonkey.
So I had to rethink how to package it differently while still trying to keep Firefox compatible with many versions of Puppy. The changes I have made can be found -> here and the pets and sfs can be found in the first page of the same thread.

Also my latest Firefox pet can also be downloaded with GetPackage.
It worked for me in Dpup, Lucid, Slacko and Wary/Racy and should work in other versions of Puppy as long as they don't have any other missing dependencies.

tlchost
Posts: 2057
Joined: Sun 05 Aug 2007, 23:26
Location: Baltimore, Maryland USA
Contact:

#104 Post by tlchost »

Tman wrote: should work in other versions of Puppy as long as they don't have any other missing dependencies.
Fluppy 013 on bootable USB .... FF can not play videos on You Tube....

Thom

User avatar
Tman
Posts: 808
Joined: Sat 22 Jan 2011, 21:39
Location: Toronto

#105 Post by Tman »

tlchost wrote: Fluppy 013 on bootable USB .... FF can not play videos on You Tube....

Thom
If I remember correctly, newer versions of Firefox requires a newer flashplayer-plugin. A pet is available -> here
Also, if you want a flashplayer downloader script, Shinobar's version is good. The thread for it is ->here

User avatar
Tman
Posts: 808
Joined: Sat 22 Jan 2011, 21:39
Location: Toronto

#106 Post by Tman »

I have made a custom search html file that combines a google search with the well-minded puppy search. I find it also loads faster than using Firefox's about:home as well as Google's home page. And if you click on the logo, it takes you to the murga forum.

Edit: I have removed the original tar.gz file and replaced it with a pet that installs it into /root/my-documents. The html file has been further cut-down.
Attachments
custom_search.png
(67.79 KiB) Downloaded 1112 times
Last edited by Tman on Mon 05 Mar 2012, 00:43, edited 1 time in total.

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

Re: SolidPup 5.1.1 FINAL

#107 Post by sheldonisaac »

Downloaded to other computer:

ASUS P5A from about 1998
ISA SB16 sound card
2 PATA HDDs on primary IDE
2 optical drives on secondary IDE

So far only classic 214X boots without a very long delay after GRUB says it's loading the vmlinuz and the initrd.gz

Like some other Puppys I've tried, this SolidPup has the long delay.

I searched on line, and some people mention the
ata3:00:qc timeout (cmd 0xec)
ata3:00: failed to IDENTIFY (I/O error, err_mask=0x5)
as possibly related?
Those lines occur 3 times in dmesg, and same for ata3.01

Code: Select all

title Solid
root (hd1,8)
kernel /vmlinuz
initrd /initrd.gx
I hope someone can help.

Thank you.

User avatar
Tman
Posts: 808
Joined: Sat 22 Jan 2011, 21:39
Location: Toronto

#108 Post by Tman »

Shouldn't the last part of your code be initrd.gz? or was that a typo?

Also, Have you tried using the grub4dos config tool to automatically detect and configure your pups?
I have mine frugally installed in /mnt/home/solid511. The following is one of my grub4dos codes:

Code: Select all

title SolidPup 5.1.1 - Normal Mode
  find --set-root --ignore-floppies --ignore-cd /solid511/initrd.gz
  kernel /solid511/vmlinuz   psubdir=solid511 pmedia=atahd pfix=fsck
  initrd /solid511/initrd.gz
Grub4Dos, sets the code differently for different computers, but once you have it automatically detect your Operating Systems, you should be able to figure the rest out by looking the the menu.lst file
But keep a backup of your old bootconfig file just in case.

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

Solid on ASUS P5A

#109 Post by sheldonisaac »

Tman wrote:Shouldn't the last part of your code be initrd.gz? or was that a typo?
Yes, Tman, it was a typo.
Also, Have you tried using the grub4dos config tool to automatically detect and configure your pups?
Not yet, but thank you, I hope to do that soon.
I have mine frugally installed in /mnt/home/solid511. The following is one of my grub4dos codes:

Code: Select all

title SolidPup 5.1.1 - Normal Mode
  find --set-root --ignore-floppies --ignore-cd /solid511/initrd.gz
  kernel /solid511/vmlinuz   psubdir=solid511 pmedia=atahd pfix=fsck
  initrd /solid511/initrd.gz
Grub4Dos, sets the code differently for different computers, but once you have it automatically detect your Operating Systems, you should be able to figure the rest out by looking the the menu.lst file
But keep a backup of your old bootconfig file just in case.
Many thanks for such a prompt reply - I appreciate it.
Thus far I'd just added a Solid stanza(?) to the existing menu.lst, in /mnt/sdb6/boot/grub/

User avatar
Tman
Posts: 808
Joined: Sat 22 Jan 2011, 21:39
Location: Toronto

Re: Solid on ASUS P5A

#110 Post by Tman »

sheldonisaac wrote: Thus far I'd just added a Solid stanza(?) to the existing menu.lst, in /mnt/sdb6/boot/grub/
I am not all too familiar with grub, as the grub4dos config tool that comes standard in many pups has done what I needed it to do.
I always install grub4dos to the mbr on the first partition of my first hard-drive.
Grub4dos uses a menu.lst file as well, which makes it easy to confuse the two.

A quick google search led me to some grub menu.lst samples:
How to edit Grub menu.lst

Post Reply