Yeah I already did that and it worked of course.dawsnboy- a symlink will fix it, for now, ln -s /usr/lib/libpoppler-glib.so.6.0.0 /usr/lib/libpoppler-glib.so.4. That's a stop gap measure, needs a epdfviewer recompile
spup-121.02 pre-alpha3 based on 13.37
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
spup_devx_120/usr/man has 1MB of git man pages, just a waste of space.
/usr/share/icons/hicolor/icon-theme.cache can be deleted from the devx, since the iso contains one already 322 kb
when I opened rxvt I had a message
"bash: warning: setlocale: LC_COLLATE: cannot change locale (en_US): No such file or directory"
just made the devx.pet so now I'm fault troubleshooting/testing it
ttuuxxx
/usr/share/icons/hicolor/icon-theme.cache can be deleted from the devx, since the iso contains one already 322 kb
when I opened rxvt I had a message
"bash: warning: setlocale: LC_COLLATE: cannot change locale (en_US): No such file or directory"
just made the devx.pet so now I'm fault troubleshooting/testing it
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
ttuuxxx, couple of libs missing in devx, on previous page but you may have missed it , libelf, libmpc, cxxlibs.. they are in PPM
compiling seamonkey-2.0.14 as I type
compiling seamonkey-2.0.14 as I type
Puppy Linux Blog - contact me for access
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
can't find the libmpc, cxxlibs,libgmp,libmpfr in ppm01micko wrote:ttuuxxx, couple of libs missing in devx, on previous page but you may have missed it , libelf, libmpc, cxxlibs.. they are in PPM
compiling seamonkey-2.0.14 as I type
which repo should I look at
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
I have that was the first thing I did01micko wrote:just use the search box
must be a www repo link, I don't mind searching manually
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
rcrsn51, I found Patriot's pet and printing is ok now, thanks.
ttuuxxx, I just checked, pasting those libs into PPM searchbox and they show up, they're in the main slackware repo, but don't show because they are building blocks. That category should still be there IMO, Barry enabled "all" for wary/quirky only, doesn't work with others as it's way too slow.
ttuuxxx, I just checked, pasting those libs into PPM searchbox and they show up, they're in the main slackware repo, but don't show because they are building blocks. That category should still be there IMO, Barry enabled "all" for wary/quirky only, doesn't work with others as it's way too slow.
Puppy Linux Blog - contact me for access
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
cool I have them all now
ttuuxxx
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Xchat is in the wrong menu, it can be found under network, where it should be under Internet, maybe just change/update the .desktop
ttuuxxx
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
I hope the enclosed pic is what you want01micko wrote: Lobster, can you run the command in the first post on your radeon? Any puppy will give the same result.
- Attachments
-
- MDIA0007.JPG
- (56.05 KiB) Downloaded 496 times
Right to the desktop.
That is not your (i.e Spup) Menu -> Setup -> Video Setup Wizard is it?
I love the Audio control to set the default audio card. That is very useful if you have more than one because very few programs allow you to say which audio card they should send the sound to--they just assume default..
All of the radeon drivers loaded. Looks fine. We are supposed to wait for glx/dri?VGA compatible controller : ATI Technologies Inc RV670PRO [Radeon HD 3850]
That is not your (i.e Spup) Menu -> Setup -> Video Setup Wizard is it?
I love the Audio control to set the default audio card. That is very useful if you have more than one because very few programs allow you to say which audio card they should send the sound to--they just assume default..
Lobster.. yes that's the one thanks
playdayz... I'll have to disable that video wizard, will use quickpet method eventually. Get mesa from PPM (slackware, works ok)
The sound wizard is kirk's, Barry has it in woof now by default.
playdayz... I'll have to disable that video wizard, will use quickpet method eventually. Get mesa from PPM (slackware, works ok)
The sound wizard is kirk's, Barry has it in woof now by default.
Puppy Linux Blog - contact me for access
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Here's the latest Transmission with static libevent
I also added an item to mailcap and added it to rox mimes-types, so its fully configured to open torrents either when the browser ask you to open with? or save the torrent, and open it by clicking on it.
ttuuxxx
transmission-2.30b4-i486|transmission|2.30b4-i486||Internet|1012K||transmission-2.30b4-i486.pet||Download and share files over BitTorrent|slackware|13.37||
I also added an item to mailcap and added it to rox mimes-types, so its fully configured to open torrents either when the browser ask you to open with? or save the torrent, and open it by clicking on it.
ttuuxxx
transmission-2.30b4-i486|transmission|2.30b4-i486||Internet|1012K||transmission-2.30b4-i486.pet||Download and share files over BitTorrent|slackware|13.37||
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
And if you want to add a static libevent to the devx, here's the static one I compiled. Its not needed to run transmission, only to compile it.
But its usefull for other apps.
ttuuxxx
libevent_DEV-2.0.11-stable-i486|libevent_DEV|2.0.11-stable-i486||BuildingBlock|1040K||libevent_DEV-2.0.11-stable-i486.pet||dep|slackware|13.37||
But its usefull for other apps.
ttuuxxx
libevent_DEV-2.0.11-stable-i486|libevent_DEV|2.0.11-stable-i486||BuildingBlock|1040K||libevent_DEV-2.0.11-stable-i486.pet||dep|slackware|13.37||
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
pupdail is failing.
failed wvdail from spup120--> The PPP daemon has died. (exit code = 127)
connected in puppeee4.4rc2[Dialer Defaults]
Modem = /dev/ttyACM0
#Modem = /dev/ttyACM1
Baud = 57600
Init1 =
Init2 = ATZ
Init3 = ATQ0V1E1S0=0&C1&D2+FCLASS=0
Carrier Check = no
Dial Command = ATDT
[Dialer isp1]
Phone = *99#
Username = MYUSERNAME
Password = MYPASSWORD
Auto Reconnect = yes
[Dialer isp1apn]
Init5 = AT+CGDCONT=1,"IP","internet"
[Dialer isp2]
Phone = MY2ISPPHONENUM
Username = MY2USERNAME
Password = MY2PASSWORD
Auto Reconnect = yes
[Dialer isp2apn]
Init5 = AT+CGDCONT=1,"IP",""
[Dialer pin]
Init1 = AT+CPIN=
[Dialer wireless]
#To force only 2G or 3G, uncomment the Init4 line and append 0 (2G) or 2 (3G), and substitute your operator's name for MYOPS.
#Init4 = AT+COPS=0,0,"MYOPS",
#Init6-Init9 lines are available for user purposes; the commented examples can be used as described:
#To force the 3G quality of service level, uncomment the Init6/Init7 line pair and set value two places each, for 384k/144k/64k, omitting the "k" (e.g., =1,4,64,384,64,384).
#To list all the APNs stored in the modem, uncomment the Init8 line; check the Connection status log for lines beginning with +CGDCONT:.
#To list the operator identifier stored in the modem, uncomment the Init9 line; check the Connection status log for a line beginning with +COPS:.
#Init6 = AT+CGEQMIN=1,4,64,384,64,384
#Init7 = AT+CGEQREQ=1,4,64,384,64,384
#Init8 = AT+CGDCONT?
#Init9 = AT+COPS?
[Dialer Defaults]
Modem = /dev/ttyACM1
#Modem = /dev/ttyACM2
Baud = 460800
Init1 =
Init2 = ATZ
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Carrier Check = no
Dial Command = ATDT
[Dialer isp1]
Phone = *99#
Username = MYUSERNAME
Password = MYPASSWORD
Auto Reconnect = yes
[Dialer isp1apn]
Init5 = AT+CGDCONT=1,"IP","internet"
[Dialer isp2]
Phone = MY2ISPPHONENUM
Username = MY2USERNAME
Password = MY2PASSWORD
Auto Reconnect = yes
[Dialer isp2apn]
Init5 = AT+CGDCONT=1,"IP",""
[Dialer pin]
Init1 = AT+CPIN=
[Dialer wireless]
#To force only 2G or 3G, uncomment the Init4 line and append 0 (2G) or 2 (3G), and substitute your operator's name for MYOPS.
#Init4 = AT+COPS=0,0,"MYOPS",
#Init6-Init9 lines are available for user purposes; the commented examples can be used as described:
#To force the 3G quality of service level, uncomment the Init6/Init7 line pair and set value two places each, for 384k/144k/64k, omitting the "k" (e.g., =1,4,64,384,64,384).
#To list all the APNs stored in the modem, uncomment the Init8 line; check the Connection status log for lines beginning with +CGDCONT:.
#To list the operator identifier stored in the modem, uncomment the Init9 line; check the Connection status log for a line beginning with +COPS:.
#Init6 = AT+CGEQMIN=1,4,64,384,64,384
#Init7 = AT+CGEQREQ=1,4,64,384,64,384
Re: spup-120 pre-alpha based on 13.37
I was attempting to test a full install of 120 but......... Gparted failed.01micko wrote: Things to test
*gparted
*grub
*grub4dos
*full installs
*usb
*ntfs/windows partitions
*keyboard
I deleted the existing partitions and swap but when trying to create new partitions the filesystem choices were greyed out.
Using a Lucid disc at the moment to partition the drive........successfully completed.
Back in a few, let's see if a full install with Grub works.
EDIT:
Grub did not work either. Clicking "simple" led instead to the "expert" menu which was stuck in a loop. Used Grub4dos and booted into the full install of 120.
No wallpaper, gray background with dreaded red/white triangles instead of icons.
EDIT 2:
Just to be certain I tried a full install again, same result.
Last edited by James C on Tue 03 May 2011, 03:46, edited 1 time in total.
- ttuuxxx
- Posts: 11171
- Joined: Sat 05 May 2007, 10:00
- Location: Ontario Canada,Sydney Australia
- Contact:
Hi mick
Do you have a file list of what files/versions were installed on slackware13.37 , That would be very handy when compiling, so I could easily match the dep versions.
ttuuxxx
Do you have a file list of what files/versions were installed on slackware13.37 , That would be very handy when compiling, so I could easily match the dep versions.
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)
Hi ttuuxxx
If you look in /root/.packages you'll see Packages-slackware-13.37-official, plus the salix version and the spup version, plus there are some quirky libs that need upgrading. Ypu can cross reference with /root/.packages/woof-installed-packages.
Woof reads these files to build the distro and PPM reads them for the PPM.
Hope that's got what you need, should have
If you look in /root/.packages you'll see Packages-slackware-13.37-official, plus the salix version and the spup version, plus there are some quirky libs that need upgrading. Ypu can cross reference with /root/.packages/woof-installed-packages.
Woof reads these files to build the distro and PPM reads them for the PPM.
Hope that's got what you need, should have
Puppy Linux Blog - contact me for access
Re: spup-120 pre-alpha based on 13.37
Just did a frugal install of 120 with the installer.....no problems.I even have wallpaper and icons this time.James C wrote:I was attempting to test a full install of 120 but......... Gparted failed.01micko wrote: Things to test
*gparted
*grub
*grub4dos
*full installs
*usb
*ntfs/windows partitions
*keyboard
I deleted the existing partitions and swap but when trying to create new partitions the filesystem choices were greyed out.
Using a Lucid disc at the moment to partition the drive........successfully completed.
Back in a few, let's see if a full install with Grub works.
EDIT:
Grub did not work either. Clicking "simple" led instead to the "expert" menu which was stuck in a loop. Used Grub4dos and booted into the full install of 120.
No wallpaper, gray background with dreaded red/white triangles instead of icons.
EDIT 2:
Just to be certain I tried a full install again, same result.
Sound, internet and display all good.
EDIT:
Need to reset the time every reboot but the timezone stays correct.
Last edited by James C on Tue 03 May 2011, 04:30, edited 1 time in total.