Bluetooth in lucid puppy ----> blueman is here
I have done down to step 4, and it stopped with error below.
Tried again on a new installation of Lucid, same thing.
Is Python a Microsoft product, by any chance?
I am Micro Pist Off.
Tried again on a new installation of Lucid, same thing.
Is Python a Microsoft product, by any chance?
I am Micro Pist Off.
- Attachments
-
- PythonHeaders-error.jpg
- (177.51 KiB) Downloaded 3419 times
-
- Posts: 452
- Joined: Thu 20 Mar 2008, 01:48
checking for header not found ?
the problem is likely because you are using u-buntu's python
Python
http://www.murga-linux.com/puppy/viewto ... 1c1b1f2cef
or
http://www.mediafire.com/?sharekey=42f2 ... a77d7aad89
Devx
http://www.murga-linux.com/puppy/viewtopic.php?t=63251
i use clusterpupv2
http://www.murga-linux.com/puppy/viewtopic.php?t=63705
it has all lucid 5.2-devx-python
UPDATE-
installed openobex, obexftp before script----> successfully sending files into phone
the problem is likely because you are using u-buntu's python
Python
http://www.murga-linux.com/puppy/viewto ... 1c1b1f2cef
or
http://www.mediafire.com/?sharekey=42f2 ... a77d7aad89
Devx
http://www.murga-linux.com/puppy/viewtopic.php?t=63251
i use clusterpupv2
http://www.murga-linux.com/puppy/viewtopic.php?t=63705
it has all lucid 5.2-devx-python
UPDATE-
installed openobex, obexftp before script----> successfully sending files into phone
Cluster-Pup v.2-Puppy Beowulf Cluster
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
Started all over again using the SFS you recommended.
Now I seem to have come full circle.. no dbus module.
I'm not meant to succeed here, I'm sure, so I'll put it aside for now and try again later, when I don't have better things to do.
Thank you for all your help, and I hope you succeed.
Now I seem to have come full circle.. no dbus module.
I'm not meant to succeed here, I'm sure, so I'll put it aside for now and try again later, when I don't have better things to do.
Thank you for all your help, and I hope you succeed.
- Attachments
-
- no_dbus.jpg
- (158.52 KiB) Downloaded 3345 times
-
- Posts: 452
- Joined: Thu 20 Mar 2008, 01:48
sorry to hear that...
i wonder why the script didnt run at your place
perhaps you didnt install libpcre.la.pet ? because it can make huge different
I have successfully sending files from and to phone...
i will try to create pet and post when i successfully test them.
i wonder why the script didnt run at your place
perhaps you didnt install libpcre.la.pet ? because it can make huge different
thank youThank you for all your help, and I hope you succeed.
I have successfully sending files from and to phone...
i will try to create pet and post when i successfully test them.
Last edited by Master_wrong on Fri 29 Apr 2011, 18:04, edited 1 time in total.
Cluster-Pup v.2-Puppy Beowulf Cluster
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
-
- Posts: 452
- Joined: Thu 20 Mar 2008, 01:48
http://hotfile.com/dl/117222286/b60de79 ... n.zip.html
this is the blueman for puppy...
1. install all pet, install blueman.pet last (i dont know if it makes any different, but that's how i test it)
2. run script -----> Ignore error
3. run at terminal... blueman-applet
giving right to every user at /usr/libexec/dbus-daemon-launch-helper will remove error at startup
please help me to improve this as i only have handphone. so i cannot test other device.
thank you
this is the blueman for puppy...
1. install all pet, install blueman.pet last (i dont know if it makes any different, but that's how i test it)
2. run script -----> Ignore error
3. run at terminal... blueman-applet
giving right to every user at /usr/libexec/dbus-daemon-launch-helper will remove error at startup
please help me to improve this as i only have handphone. so i cannot test other device.
thank you
Last edited by Master_wrong on Mon 09 May 2011, 11:41, edited 2 times in total.
Cluster-Pup v.2-Puppy Beowulf Cluster
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
-
- Posts: 452
- Joined: Thu 20 Mar 2008, 01:48
UPDATE... obexfs
here is obexfs...
- Attachments
-
- success.png
- (103.8 KiB) Downloaded 1650 times
Cluster-Pup v.2-Puppy Beowulf Cluster
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
OK, I found some time to try this at 3am today.
What a pleasant change to not be getting a Python error. (It just hasn't got that far yet).
I am stopped by this error instead.
I guess I know what it means but don't know how to fix it.
What a pleasant change to not be getting a Python error. (It just hasn't got that far yet).
I am stopped by this error instead.
I guess I know what it means but don't know how to fix it.
- Attachments
-
- captured.jpg
- (88.89 KiB) Downloaded 3242 times
-
- Posts: 452
- Joined: Thu 20 Mar 2008, 01:48
@winduptoys
no such device.... the last time i get that error i forgot to install something or i forgot to plug the bluetooth.
@smokey
I try but, right now i'm still need jemima's package because i cannot find the source for most packages... for example dbus. so there i still using most of jemimah pet.
but you can try livecd ? that will not break your system... even with the python pet included, you only need 256m memory (I test)
no such device.... the last time i get that error i forgot to install something or i forgot to plug the bluetooth.
@smokey
I try but, right now i'm still need jemima's package because i cannot find the source for most packages... for example dbus. so there i still using most of jemimah pet.
but you can try livecd ? that will not break your system... even with the python pet included, you only need 256m memory (I test)
Cluster-Pup v.2-Puppy Beowulf Cluster
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
I forgot to enable Bluetooth on the phone
It's working, no Python errors!
Can send to the phone.
Can't browse the phone. I don't have or want Nautilus, so I symlinked my file manager to Nautilus (or vice-versa) but it just opened in my root directory.
It said that the setting for Nautilus could be changed, but I couldn't locate where to change it.
This is the closest I have ever been to Bluetooth in Puppy.
So near yet maybe so far.
Now I'm getting excited, which is probably a bit sad really.
It's working, no Python errors!
Can send to the phone.
Can't browse the phone. I don't have or want Nautilus, so I symlinked my file manager to Nautilus (or vice-versa) but it just opened in my root directory.
It said that the setting for Nautilus could be changed, but I couldn't locate where to change it.
This is the closest I have ever been to Bluetooth in Puppy.
So near yet maybe so far.
Now I'm getting excited, which is probably a bit sad really.
-
- Posts: 452
- Joined: Thu 20 Mar 2008, 01:48
It's working, no Python errors!
Oh it alive it''s alive
finally...
I 'm happy its working now, you almost scare me with all the error messages...
it surely scare smokey
1. install the lucid-fuse-obexfsCan't browse the phone.
2. after run bllueman-applet, right-click on applet ---> select local service
3. select transfer, click on advanced
4. see my post picture about lucid-fuse-obexfs, its also the needed setting if you want your computer to accept files from phone
5. create /root/a
6. click browse
7. open rox /root/a
there you have it, browse your phone, copy from or into phone...
copy into phone makes error messages about changing files ownership, but its copied allright
is it really that difficult to make you happy ?Now I'm getting excited, which is probably a bit sad really.
Cluster-Pup v.2-Puppy Beowulf Cluster
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
it is customary to update the first post to contain the latest downloads and info.
does it do remote internet tether which puppeee bluez cant do?
good work anyways.
waiting for download now. this host http://www.datafilehost.com/ doesnt require a wait.You reached your hourly traffic limit.
does it do remote internet tether which puppeee bluez cant do?
good work anyways.
Blueman zip now also at http://www.datafilehost.com/download-e06a65b4.html cant be sure as have no check sums.
-
- Posts: 452
- Joined: Thu 20 Mar 2008, 01:48
@aarf,
thanks, i also upload there. and on the first post now
btw
Having problem with connecting to rfcomm, testing to install policy-kit tomorrow.
https://bugs.launchpad.net/blueman/+bug/403779
thanks, i also upload there. and on the first post now
btw
Having problem with connecting to rfcomm, testing to install policy-kit tomorrow.
https://bugs.launchpad.net/blueman/+bug/403779
Cluster-Pup v.2-Puppy Beowulf Cluster
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
-
- Posts: 452
- Joined: Thu 20 Mar 2008, 01:48
now you are excited too early...Now I AM excited Smile
there is still some problem...
i cannot connect to rfcomm... even when compiled without policykit, now lets see if there is another way...
from
https://bugs.launchpad.net/blueman/+bug/770259
--- /usr/share/pyshared/blueman/main/PPPConnection.py 2010-12-08 18:02:25.000000000 +0100
+++ /usr/share/pyshared/blueman/main/PPPConnection.py.working 2011-04-25 15:15:55.000000000 +0200
@@ -88,9 +88,12 @@ class PPPConnection(gobject.GObject):
def connect_callback(self, response):
if "CONNECT" in response:
dprint("Starting pppd")
- self.pppd = subprocess.Popen(["/usr/sbin/pppd", "%s" % self.port, "defaultroute", "updetach", "usepeerdns"], bufsize=1, stdout=subprocess.PIPE)
+ self.pppd = subprocess.Popen(["/usr/sbin/pppd", "%s" % self.port,
+ "crtscts",
+ "defaultroute", "nodetach", "usepeerdns"
+ ], bufsize=1, stdout=subprocess.PIPE)
glib.io_add_watch(self.pppd.stdout, glib.IO_IN | glib.IO_ERR | glib.IO_HUP, self.on_pppd_stdout)
- glib.timeout_add(1000, self.check_pppd)
+ glib.timeout_add(2000, self.check_pppd)
self.cleanup()
else:
@@ -178,7 +181,8 @@ class PPPConnection(gobject.GObject):
print "pppd exited with status %d" % status
return False
- return True
+ self.emit("connected", self.interface)
+ return False
def send_command(self, command):
dprint("-->", command)
Cluster-Pup v.2-Puppy Beowulf Cluster
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
-
- Posts: 452
- Joined: Thu 20 Mar 2008, 01:48
pppd 2.4.5 seem incompatible with blueman...
with pppd 2.4.3 rfcomm can be set from blueman but i didnt know how to test, what dialer to use.
maybe its much easier to create custom script which run when we press browse button in blueman ?
which we will choose to browse or to dial internet ?
I dont know the answer, I hope other dev can improve.
thank you
with pppd 2.4.3 rfcomm can be set from blueman but i didnt know how to test, what dialer to use.
maybe its much easier to create custom script which run when we press browse button in blueman ?
which we will choose to browse or to dial internet ?
I dont know the answer, I hope other dev can improve.
thank you
Cluster-Pup v.2-Puppy Beowulf Cluster
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
[url]http://www.murga-linux.com/puppy/viewtopic.php?p=499199#499199[/url]
http://www.bluesoleil.com/products/S000 ... 90007.html
IVT has a Linux version which they say is for all Linuxes.
I get an error trying to run it.
I am away from my computer ATM, so I can't post the error now, but will if anyone is interested.
IVT has a Linux version which they say is for all Linuxes.
I get an error trying to run it.
I am away from my computer ATM, so I can't post the error now, but will if anyone is interested.
- Béèm
- Posts: 11763
- Joined: Wed 22 Nov 2006, 00:47
- Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win
I have written to IVT support, as I was successful in installing Bluesoleil in Wine, but my bluetooth device wasn't show and thus used.WindUpToy wrote:http://www.bluesoleil.com/products/S000 ... 90007.html
IVT has a Linux version which they say is for all Linuxes.
I get an error trying to run it.
I am away from my computer ATM, so I can't post the error now, but will if anyone is interested.
I wrote again and was referred to linux download, but that didn't work.
Can't quite remember what the issue was. I have to look and find my notes.
Also I think some software wasn't free.
I had some success with Blueman for file transfer. (up and down load)
I had other things to attend too, so I didn't pursue for the moment.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]