Samsung Printer/Scanner Drivers - Updated 2013
Which Puppy are you using?
I notice "direct hp" in your list. That indicates that you have an HP printer installed. But then you should also see a "direct usb://" entry for that printer.
This is not a CUPS or Samsung problem. Something has gone wrong with your USB detection.
Boot off your Live CD using "puppy pfix=ram" and check for printers.
I notice "direct hp" in your list. That indicates that you have an HP printer installed. But then you should also see a "direct usb://" entry for that printer.
This is not a CUPS or Samsung problem. Something has gone wrong with your USB detection.
Boot off your Live CD using "puppy pfix=ram" and check for printers.
- Spaccafumo
- Posts: 33
- Joined: Thu 15 Jan 2009, 11:06
- Location: Sulmona - Italy
Samsung ML-2010R
This driver works with laser monocrome printer
Samsung ML-2010R:
Before copying it in '/usr/share/cups/model' i found very useful to reinstall cups by this file: 'cups-install-v0.3.pup'. I am not able to upload it now. Maybe because it weighs more then 18 mb.
Samsung ML-2010R:
Before copying it in '/usr/share/cups/model' i found very useful to reinstall cups by this file: 'cups-install-v0.3.pup'. I am not able to upload it now. Maybe because it weighs more then 18 mb.
ML-2165W
Thanks for maintaining this pet. I'm new to CUPS and linux printers. I downloaded and installed your latest pet, then started CUPS and clicked Find new printers. It immediately found my ML-2165W, which is wifi-connected. I was amazed at how easy it went. Then I clicked to make it the default printer and Print Test Page. I do get some print out, but it isn't a test page, just these five lines
I'm not sure what it means, I'd guess it is some sort of internal test page. Note: in CUPS I did click Print Test Page, not Self Test Page.
What am I doing wrong?
I run puppy saluki 023, some more info
A cryptic (for me) "[Job 6] Unable to open input" stands out in the CUPS error log
Code: Select all
SPL ERROR - FALSE
POSITION : 0x1 (1)
SYSTEM : h6fw)5.57/xl_tbl
LINE : 403
VERSION : SPL 5.57 01-12-2012
What am I doing wrong?
I run puppy saluki 023, some more info
Code: Select all
# /etc/init.d/cups restart
cups: restarted scheduler.
# lpinfo -v
network socket
network http
network ipp
network lpd
network socket://192.168.0.40
direct scsi
network pdf-writer
network smbc
network smb
# ls /usr/share/cups/model
gutenprint uld-samsung
#
# ls /usr/share/cups/model/gutenprint/
5.0 5.2
# ls -R /usr/share/cups/model/gutenprint/
/usr/share/cups/model/gutenprint/:
5.0 5.2
/usr/share/cups/model/gutenprint/5.0:
/usr/share/cups/model/gutenprint/5.2:
# ls /usr/share/cups/model/uld-samsung/*2160*
/usr/share/cups/model/uld-samsung/ML-2160.ppd.gz
#
Code: Select all
I [29/May/2013:10:22:25 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=7286)
I [29/May/2013:10:22:25 +0200] [Job 5] Adding start banner page "none".
I [29/May/2013:10:22:25 +0200] [Job 5] Adding end banner page "none".
I [29/May/2013:10:22:25 +0200] [Job 5] File of type application/postscript queued by "anonymous".
I [29/May/2013:10:22:25 +0200] [Job 5] Queued on "CUPS-PDF" by "anonymous".
I [29/May/2013:10:22:25 +0200] [Job 5] Started filter /usr/lib/cups/filter/pstops (PID 7287)
I [29/May/2013:10:22:25 +0200] [Job 5] Started backend /usr/lib/cups/backend/pdf-writer (PID 7288)
I [29/May/2013:10:22:26 +0200] [Job 5] Completed successfully.
I [29/May/2013:10:22:28 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=7311)
I [29/May/2013:10:22:49 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=7451)
I [29/May/2013:10:26:02 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=11663)
I [29/May/2013:10:26:14 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=11723)
I [29/May/2013:10:26:21 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=11760)
I [29/May/2013:10:26:21 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=11761)
E [29/May/2013:10:26:21 +0200] [cups-deviced] Bad line from "pdf-writer": Error: /usr/lib/cups/backend/pdf-writer - ps2pdf is not available!
I [29/May/2013:10:26:28 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=11826)
I [29/May/2013:10:26:56 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=11998)
I [29/May/2013:10:26:56 +0200] Started "/usr/lib/cups/daemon/cups-driverd" (pid=11999)
I [29/May/2013:10:27:01 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=12018)
I [29/May/2013:10:27:01 +0200] Setting Samsung_ML-2160_Series_192.168.0.40 device-uri to "socket://192.168.0.40" (was "file:/dev/null".)
I [29/May/2013:10:27:01 +0200] Setting Samsung_ML-2160_Series_192.168.0.40 printer-is-accepting-jobs to 1 (was 0.)
I [29/May/2013:10:27:01 +0200] Setting Samsung_ML-2160_Series_192.168.0.40 printer-state to 3 (was 5.)
I [29/May/2013:10:27:01 +0200] Saving printers.conf...
I [29/May/2013:10:27:01 +0200] New printer "Samsung_ML-2160_Series_192.168.0.40" added by "anonymous".
I [29/May/2013:10:27:07 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=12071)
I [29/May/2013:10:27:54 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=12346)
I [29/May/2013:10:27:54 +0200] Saving printers.conf...
I [29/May/2013:10:27:54 +0200] Printer "Samsung_ML-2160_Series_192.168.0.40" modified by "anonymous".
I [29/May/2013:10:27:59 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=12383)
I [29/May/2013:10:27:59 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=12384)
I [29/May/2013:10:28:10 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=12436)
I [29/May/2013:10:28:10 +0200] Saving printers.conf...
I [29/May/2013:10:28:10 +0200] Saving classes.conf...
I [29/May/2013:10:28:10 +0200] Default destination set to "Samsung_ML-2160_Series_192.168.0.40" by "anonymous".
I [29/May/2013:10:28:15 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=12488)
I [29/May/2013:10:28:15 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=12489)
I [29/May/2013:10:28:19 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=12508)
I [29/May/2013:10:28:24 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=12542)
I [29/May/2013:10:28:26 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=12543)
I [29/May/2013:10:28:30 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=12562)
I [29/May/2013:10:28:48 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=12683)
I [29/May/2013:10:28:48 +0200] [Job 6] Adding start banner page "none".
I [29/May/2013:10:28:48 +0200] [Job 6] Adding end banner page "none".
I [29/May/2013:10:28:48 +0200] [Job 6] File of type application/postscript queued by "anonymous".
I [29/May/2013:10:28:48 +0200] [Job 6] Queued on "Samsung_ML-2160_Series_192.168.0.40" by "anonymous".
I [29/May/2013:10:28:48 +0200] [Job 6] Started filter /usr/lib/cups/filter/pstops (PID 12684)
I [29/May/2013:10:28:48 +0200] [Job 6] Started filter /usr/lib/cups/filter/pstospl (PID 12685)
I [29/May/2013:10:28:48 +0200] [Job 6] Started backend /usr/lib/cups/backend/socket (PID 12686)
E [29/May/2013:10:28:48 +0200] [Job 6] Unable to open input
I [29/May/2013:10:28:50 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=12688)
I [29/May/2013:10:28:53 +0200] [Job 6] Completed successfully.
I [29/May/2013:10:29:00 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=12758)
I [29/May/2013:10:41:06 +0200] Listening to ::1:631 (IPv6)
I [29/May/2013:10:41:06 +0200] Listening to 127.0.0.1:631 (IPv4)
I [29/May/2013:10:41:06 +0200] Listening to /var/run/cups/cups.sock (Domain)
I [29/May/2013:10:41:06 +0200] Remote access is disabled.
I [29/May/2013:10:41:06 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [29/May/2013:10:41:06 +0200] Using default TempDir of /var/spool/cups/tmp...
I [29/May/2013:10:41:06 +0200] Configured for up to 100 clients.
I [29/May/2013:10:41:06 +0200] Allowing up to 100 client connections per host.
I [29/May/2013:10:41:06 +0200] Using policy "default" as the default!
I [29/May/2013:10:41:06 +0200] Full reload is required.
I [29/May/2013:10:41:06 +0200] Saving job cache file "/var/cache/cups/job.cache"...
I [29/May/2013:10:41:06 +0200] Loaded MIME database from '/etc/cups': 35 types, 37 filters...
I [29/May/2013:10:41:06 +0200] Loading job cache file "/var/cache/cups/job.cache"...
I [29/May/2013:10:41:06 +0200] Full reload complete.
E [29/May/2013:10:41:06 +0200] Unable to open listen socket for address ::1:631 - Address family not supported by protocol.
I [29/May/2013:10:41:06 +0200] Listening to 127.0.0.1:631 on fd 3...
I [29/May/2013:10:41:06 +0200] Listening to /var/run/cups/cups.sock on fd 5...
I [29/May/2013:10:41:06 +0200] Resuming new connection processing...
I [29/May/2013:10:41:15 +0200] Scheduler shutting down normally.
I [29/May/2013:10:41:15 +0200] Saving job cache file "/var/cache/cups/job.cache"...
I [29/May/2013:10:41:19 +0200] Listening to ::1:631 (IPv6)
I [29/May/2013:10:41:19 +0200] Listening to 127.0.0.1:631 (IPv4)
I [29/May/2013:10:41:19 +0200] Listening to /var/run/cups/cups.sock (Domain)
I [29/May/2013:10:41:19 +0200] Remote access is disabled.
I [29/May/2013:10:41:19 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [29/May/2013:10:41:19 +0200] Using default TempDir of /var/spool/cups/tmp...
I [29/May/2013:10:41:19 +0200] Configured for up to 100 clients.
I [29/May/2013:10:41:19 +0200] Allowing up to 100 client connections per host.
I [29/May/2013:10:41:19 +0200] Using policy "default" as the default!
I [29/May/2013:10:41:19 +0200] Full reload is required.
I [29/May/2013:10:41:19 +0200] Loaded MIME database from '/etc/cups': 35 types, 37 filters...
I [29/May/2013:10:41:19 +0200] Loading job cache file "/var/cache/cups/job.cache"...
I [29/May/2013:10:41:19 +0200] Full reload complete.
I [29/May/2013:10:41:19 +0200] Cleaning out old temporary files in "/var/spool/cups/tmp"...
E [29/May/2013:10:41:19 +0200] Unable to open listen socket for address ::1:631 - Address family not supported by protocol.
I [29/May/2013:10:41:19 +0200] Listening to 127.0.0.1:631 on fd 4...
I [29/May/2013:10:41:19 +0200] Listening to /var/run/cups/cups.sock on fd 6...
I [29/May/2013:10:41:19 +0200] Resuming new connection processing...
I [29/May/2013:10:41:24 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=17236)
E [29/May/2013:10:41:24 +0200] [cups-deviced] Bad line from "pdf-writer": Error: /usr/lib/cups/backend/pdf-writer - ps2pdf is not available!
I [29/May/2013:10:57:43 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=23125)
The CUPS printing system in Saluki is incomplete and out of date. You need to use a different Puppy.
IIRC, Saluki has a separate printer SFS package here. Have you installed it? The messages in your error log suggest otherwise.
IIRC, Saluki has a separate printer SFS package here. Have you installed it? The messages in your error log suggest otherwise.
Sorry, I was out of town with no internet access. I just got back. Thanks for the saluki package pointer. I wasn't aware that it's incomplete. I will install that package tomorrow and report back here my findings. I certainly owe you feedback at least.rcrsn51 wrote:@step: No reply?
As for using another puppy, I love saluki but since it isn't going anywhere anymore, I might switch to precise soon.
To get your Samsung printer working in Saluki, you don't need the full printer-scanner SFS package. Just install Ghostscript.
Thanks! After installing saluki's printer-scanner-001.sfs and your pet I can print to my samsung 2165W printer. In the future I might test replacing the sfs with the ghostscript pet you linked to, but first I want to see if I can also scan, so I think I need the sfs installed.
Fyi, in addition to the sfs link you posted, there's also http://smokey01.com/saluki/sfs/printer- ... rivers.sfs, which jemimah describes as:
Fyi, in addition to the sfs link you posted, there's also http://smokey01.com/saluki/sfs/printer- ... rivers.sfs, which jemimah describes as:
jemimah Sat 14 Apr 2012, 12:43 wrote:The new printer-scanner-driver sfs has every printer driver I know about, including the big lexmark ones. Also it was built with the sfs-builder so it should integrate into the ppm so dependency checking will work correctly. (I should do this with the DevX too, but not for the first release.)scabz wrote: A quick question what is the differences between printer-scanner-core.pet, printer-scanner-001.sfs and printer-scanner-driver.sfs ?
It should be possible now to install printer drivers through the ppm so you can get just the drivers you need.
Or there may be a situation where you don't know what kind of printer you will need the drivers for, and you want all drivers, so use the sfs in that case.
There were many other drivers that Jemimah knew about, like all the Brother and Canon models. But they exist as individual packages and it would have been too cumbersome to include them all. So instead she added a bunch of drivers that 99.9% of Saluki users would never need.jemimah wrote:The new printer-scanner-driver sfs has every printer driver I know about...
All the drivers in her sfs package are now well out of date.
I'm trying to use the new CMS drivers for my samsung clp-315 and am not having great success.
I can get the printer to work using the standard driver, but if I use the CMS driver, I just get a failed to print. Is there something I'm doing wrong? I'm not quite sure how to use the CMS anyway.
I modify printer, browse for PPD, find the clp310 file in the CMS directory and then nothing works.
Is this what I'm supposed to be doing?
I can get the printer to work using the standard driver, but if I use the CMS driver, I just get a failed to print. Is there something I'm doing wrong? I'm not quite sure how to use the CMS anyway.
I modify printer, browse for PPD, find the clp310 file in the CMS directory and then nothing works.
Is this what I'm supposed to be doing?
I really don't understand what you are doing.
What do you mean by the "standard driver"? Are you talking about the samsung_print-4.01.17.pet?
There is no CMS driver. From Page 1: "Samsung colour laser printers have an optional CMS colour correction database.".
The intent of CMS is to give you better colour quality than the basic driver. All you need to do is install the PET.
Is this the first time you have installed your CLP-315 in Puppy? How did you do it before?
What do you mean by the "standard driver"? Are you talking about the samsung_print-4.01.17.pet?
There is no CMS driver. From Page 1: "Samsung colour laser printers have an optional CMS colour correction database.".
There are no PPD files in the CMS directory.I modify printer, browse for PPD, find the clp310 file in the CMS directory and then nothing works.
The intent of CMS is to give you better colour quality than the basic driver. All you need to do is install the PET.
Is this the first time you have installed your CLP-315 in Puppy? How did you do it before?
Sorry, I'll try to clarify what I've done.
I have my printer installed, no problems, has been in numerous puppies over time.
The colour from this printer in Linux has never been great. To do colour printing, I use windows in virtualbox. Gives perfect results. I saw the CMS post you put on the first page here, and thought I'd give that a go. But, I don't know what to do with it.
I have installed the samsung_print-4.01.17.pet and the printer works ok. The colour for photos isn't right. Everyone looks jaundiced, too much orangey yellow.
Installing the cms pet does nothing to change it for that printer. I don't know what I might need to do beyond installing the pet from page one of this thread.
Perhaps this is feedback for the CMS database. It doesn't seem to help much for the clp-315, or I'm doing it wrong.[/quote]
I have my printer installed, no problems, has been in numerous puppies over time.
The colour from this printer in Linux has never been great. To do colour printing, I use windows in virtualbox. Gives perfect results. I saw the CMS post you put on the first page here, and thought I'd give that a go. But, I don't know what to do with it.
I have installed the samsung_print-4.01.17.pet and the printer works ok. The colour for photos isn't right. Everyone looks jaundiced, too much orangey yellow.
Installing the cms pet does nothing to change it for that printer. I don't know what I might need to do beyond installing the pet from page one of this thread.
I know. But you click the "browse for PPD button" is what I meant. Doing this doesn't find a PPD, so that's kind of where I was coming unstuck.There are no PPD files in the CMS directory.
Perhaps this is feedback for the CMS database. It doesn't seem to help much for the clp-315, or I'm doing it wrong.[/quote]
Using which driver? Foo2xxx?p310don wrote:I have my printer installed, no problems, has been in numerous puppies over time.
How does the colour quality for this Samsung driver compare to your previous Puppy installs?
In the discussion here, Andym1 was satisfied with the driver. Perhaps you could contact him.Perhaps this is feedback for the CMS database. It doesn't seem to help much for the clp-315, or I'm doing it wrong.
I'm sorry for derailing this thread with what I've said in the past couple of posts.
The colour was not working very well for photo quality printing, regardless of using the drivers and CMS database provided at the beginning of this thread.
However, in CUPS the setting for colour printing was set to draft. (I may have done that at some point to save toner) Upon changing the setting to best, it works flawlessly.
I have tested this is both Precise 5.71 and Saluki 021.
To summarise, to get a Samsung CLP-315 printer to print nicely in Puppy Linux
Download the 2 pets under section 3 on page one of this thread:
samsung_print-4.01.17.pet
and
samsung_cms-4.01.17.pet
Install the printer in CUPS and then change the default settings to BEST quality and you will have printing just as nice as under windows.
Thanks again rcrsn51 for your patience, help and continued support for this community.
The colour was not working very well for photo quality printing, regardless of using the drivers and CMS database provided at the beginning of this thread.
However, in CUPS the setting for colour printing was set to draft. (I may have done that at some point to save toner) Upon changing the setting to best, it works flawlessly.
I have tested this is both Precise 5.71 and Saluki 021.
To summarise, to get a Samsung CLP-315 printer to print nicely in Puppy Linux
Download the 2 pets under section 3 on page one of this thread:
samsung_print-4.01.17.pet
and
samsung_cms-4.01.17.pet
Install the printer in CUPS and then change the default settings to BEST quality and you will have printing just as nice as under windows.
Thanks again rcrsn51 for your patience, help and continued support for this community.
Thanks, Works Great
Alway had a problem printing to my Samsung Printer. Now I get great prints and in color too
Using Precise Puppy (5.7 I think).
John
Using Precise Puppy (5.7 I think).
John
My sister-in-law has a Samsung clx-3305fw printer which works fine across the local wireless network with windows.
I have downloaded the drivers from Samsung here:
http://www.samsung.com/au/support/model/CLX-3305FW/XSA
What is the best way to install these in Slacko-5656?
Is it as simple as running install.sh from the expanded package?
I don't want to break her machine before I disappear for 6 months.
Thanks
I have downloaded the drivers from Samsung here:
http://www.samsung.com/au/support/model/CLX-3305FW/XSA
What is the best way to install these in Slacko-5656?
Is it as simple as running install.sh from the expanded package?
I don't want to break her machine before I disappear for 6 months.
Thanks
Landscape not working ML-2165
Hi Puppians
I've installed a Samsung ML-2165-W in Cups after installing samsung_print-4.01.17.pet. It is connected with a USB cable to a laptop. It prints well in portrait orientation but retains portrait printing when landscape orientation is selected.
The problem exists in X-Slacko 1.1 and in X-Precise 2.3 .
Thanks for your efforts and replies.
Gus
I've installed a Samsung ML-2165-W in Cups after installing samsung_print-4.01.17.pet. It is connected with a USB cable to a laptop. It prints well in portrait orientation but retains portrait printing when landscape orientation is selected.
The problem exists in X-Slacko 1.1 and in X-Precise 2.3 .
Thanks for your efforts and replies.
Gus
Have you read page 1? It has links to driver PETs that support the CLX-3300 series.smokey01 wrote:I have downloaded the drivers from Samsung here:
http://www.samsung.com/au/support/model/CLX-3305FW/XSA
What is the best way to install these in Slacko-5656?
Is it as simple as running install.sh from the expanded package?
SCX-3405 monochrome multifunction
I have the monochrome multifunction model SCX-3405 and I would like to print and scan from FatDog64 631 frugal install. Otherwise from Quirky Tahr 6.0.5 full install (it can only do full install). As a last resort, from Precise 5.7.1 frugal install.
Which dotpet, if any, do I need?
I looked for a product support page on the Samsung website, but couldn't find the exact model. Close enough, there's a support page for the SCX-3405W, which looks exactly like my model except for the addition of wireless support. Mine is a 2012 model, this one looks like it's a 2014.
http://www.samsung.com/ca/support/model ... -downloads
In there I found a Linux Printing & Scan Driver V1.00.27.04 released 2014.07.09 by the name ULD_V1.00.27.04.tar.gz.
The first post in this thread links dotpet samsung_print-uld.1.0.21.pet. The filenames are similar, possibly connected.
The same post also links samsung_scan_sam-uld.1.0.21.pet. Would I need both pets to print and scan?
This thread also references samsung_mono-4.00.35.pet but I couldn't find a download link - not that I know it would work for my case.
Thanks in advance.
Which dotpet, if any, do I need?
I looked for a product support page on the Samsung website, but couldn't find the exact model. Close enough, there's a support page for the SCX-3405W, which looks exactly like my model except for the addition of wireless support. Mine is a 2012 model, this one looks like it's a 2014.
http://www.samsung.com/ca/support/model ... -downloads
In there I found a Linux Printing & Scan Driver V1.00.27.04 released 2014.07.09 by the name ULD_V1.00.27.04.tar.gz.
The first post in this thread links dotpet samsung_print-uld.1.0.21.pet. The filenames are similar, possibly connected.
The same post also links samsung_scan_sam-uld.1.0.21.pet. Would I need both pets to print and scan?
This thread also references samsung_mono-4.00.35.pet but I couldn't find a download link - not that I know it would work for my case.
Thanks in advance.
[url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Fatdog64-810[/url]|[url=http://goo.gl/hqZtiB]+Packages[/url]|[url=http://goo.gl/6dbEzT]Kodi[/url]|[url=http://goo.gl/JQC4Vz]gtkmenuplus[/url]