Lucid 525 lite + experimental Lucid lite 2.6.38.4 - v004
I uploaded this .iso last night.
http://smokey01.com/stu90/lupu-525-02.iso
md5: 0687cbfca96680659a019db2ec2592de
This is just an edited .iso of the previous build trying a different audio fix - to be honest im not sure what i can do about not booting straight to desktop as this last build had the minimal of changed with EZ-woof - just used lupe-19 kernel and audio mod, with no other packages added / removed or altered.
cheers.
http://smokey01.com/stu90/lupu-525-02.iso
md5: 0687cbfca96680659a019db2ec2592de
This is just an edited .iso of the previous build trying a different audio fix - to be honest im not sure what i can do about not booting straight to desktop as this last build had the minimal of changed with EZ-woof - just used lupe-19 kernel and audio mod, with no other packages added / removed or altered.
cheers.
Lucid 525 lite + experimental Lucid lite 2.6.38.4 - v003
Hi stu90,
I heard the two barks on first bootup with your latest,went straight
to the desktop, resolution,wired network good.
The image shows alsamixer the way the settings were right off the bat
(different pc,fewer settings).
edit: oops, if I'd cursored over in alsamixer I would have seen a bunch more settings.
Here's a screenshot of retrovol, still haven't changed anything.
I heard the two barks on first bootup with your latest,went straight
to the desktop, resolution,wired network good.
The image shows alsamixer the way the settings were right off the bat
(different pc,fewer settings).
edit: oops, if I'd cursored over in alsamixer I would have seen a bunch more settings.
Here's a screenshot of retrovol, still haven't changed anything.
- Attachments
-
- image-2.jpg
- (14.47 KiB) Downloaded 1850 times
-
- image-1.jpg
- (13.7 KiB) Downloaded 1856 times
Last edited by Billtoo on Sun 08 May 2011, 15:46, edited 1 time in total.
V003 booted straight to the desktop for me.im not sure what i can do about not booting straight to desktop as this last build had the minimal of changed with EZ-woof - just used lupe-19 kernel and audio mod
That should be something EZ-Woof builds of Lucid 5.2.5 do automatically.
/var/log/Xorg.0.log might have useful info. You could rename it from the command line after it fails to boot cp /var/log/org.0.log /var/log/Xorg.fail or something so that it doesn't get overwritten when you successfully use xorgwizard.
Last edited by playdayz on Sun 08 May 2011, 15:59, edited 1 time in total.
Sorry James C. I should have said: different cards will have different volume control options--that is part of what makes alsa so difficult to get right for all cards I am sure--or one of the things anyway.Here's what my Retrovol looks like, notice that there is no "front"
The difference between Lupu Lite and Ice Puppy is that Ice Puppy uses Lucid 5.1.1, and Lupu Lite uses 5.2.5, am I right?
Hi Billto thanks for testing again
sounds like this one works a bit better ? i can;t quite make out on the images is Front audio set in retrovol / alsa mixer?
Hi Playdayz,
I haven't experienced any problems my self with booting direct to desktop with any of the EZ-woof builds, James and Nooby had some problems though
I had no idea how different all these sounds cards are, i presumed they all just showed to same in retrovol - mine just has settings for Master, PCM, Capture, Digital, Mux capture - like you say i can now see why getting working audio across the board can be difficult.
Yes i believe Pemasu uses 511 base, i think he has also modified things along the way as well - the first lucid lite is just a standard remaster of official lucid 525 puppy with woofy remaster tool.
cheers.
sounds like this one works a bit better ? i can;t quite make out on the images is Front audio set in retrovol / alsa mixer?
Hi Playdayz,
I haven't experienced any problems my self with booting direct to desktop with any of the EZ-woof builds, James and Nooby had some problems though
I had no idea how different all these sounds cards are, i presumed they all just showed to same in retrovol - mine just has settings for Master, PCM, Capture, Digital, Mux capture - like you say i can now see why getting working audio across the board can be difficult.
Yes i believe Pemasu uses 511 base, i think he has also modified things along the way as well - the first lucid lite is just a standard remaster of official lucid 525 puppy with woofy remaster tool.
cheers.
Lucid 525 lite + experimental Lucid lite 2.6.38.4 - v003
Yes,this one works well.The front audio was set on first boot.stu90 wrote:Hi Billto thanks for testing again
sounds like this one works a bit better ? i can;t quite make out on the images is Front audio set in retrovol / alsa mixer?
cheers.
I made a stripped down quirky 1.2 a few months ago with woof, 78mb
iso. I noticed it on the shelf yesterday and had some fun last night
by adding seamonkey 2.0.14 and cmus 2.4, also PupSnap and a couple of
other things, remastered the cd and the iso is now 94 mb.I've made more pets
this morning,audacious and a game.It even works on my newest pc but
has to use the vesa driver and the resolution is wrong but what the
heck.
Puppy is cool
- Attachments
-
- image-1.jpg
- (63.22 KiB) Downloaded 1799 times
Some progress anyway.stu90 wrote:I uploaded this .iso last night.
http://smokey01.com/stu90/lupu-525-02.iso
md5: 0687cbfca96680659a019db2ec2592de
This is just an edited .iso of the previous build trying a different audio fix - to be honest im not sure what i can do about not booting straight to desktop as this last build had the minimal of changed with EZ-woof - just used lupe-19 kernel and audio mod, with no other packages added / removed or altered.
cheers.
Manual frugal install on the old P4 test box. Initial boot still went to a prompt ,so I just ran Xorgwizard. Internet wasn't detected, so I ran Network Wizard. But the sound worked ootb.
Here's Retrovol on initial boot.
- Attachments
-
- retrovol .png
- (17.38 KiB) Downloaded 1692 times
I do manual install's which means I don't use a cd. Anyway, I burned a cd of 525-02 and it booted (pfix=ram) straight to a working desktop. No prompt.James C wrote:Some progress anyway.stu90 wrote:I uploaded this .iso last night.
http://smokey01.com/stu90/lupu-525-02.iso
md5: 0687cbfca96680659a019db2ec2592de
This is just an edited .iso of the previous build trying a different audio fix - to be honest im not sure what i can do about not booting straight to desktop as this last build had the minimal of changed with EZ-woof - just used lupe-19 kernel and audio mod, with no other packages added / removed or altered.
cheers.
Manual frugal install on the old P4 test box. Initial boot still went to a prompt ,so I just ran Xorgwizard. Internet wasn't detected, so I ran Network Wizard. But the sound worked ootb.
Still had to configure internet but sound and display work from the cd.
Timing issue?
- Hesse James
- Posts: 106
- Joined: Mon 08 Feb 2010, 18:41
DEVX and Instant Update ?
Hi Stu
So far your Puplets works ok for me (btw the first one with 2.6.38). For development reasons which DEVX would you recommend ? I have taken the standard lupu_devx_525.sfs and renamed it into lupu_devx_526.sfs to make it working. Is this your recommended version ?
Additional question: is the actual 5.25 Instant Update installed or do I have to apply this on a fresh "lite" install ?
Thanks in advance for a short notice.
Christian
So far your Puplets works ok for me (btw the first one with 2.6.38). For development reasons which DEVX would you recommend ? I have taken the standard lupu_devx_525.sfs and renamed it into lupu_devx_526.sfs to make it working. Is this your recommended version ?
Additional question: is the actual 5.25 Instant Update installed or do I have to apply this on a fresh "lite" install ?
Thanks in advance for a short notice.
Christian
Re: Lucid 525 lite + experimental Lucid lite 2.6.38.4 - v003
Hey nice one Billtoo - puppy is great for tinkering about, customizing, building and experimenting with.Billtoo wrote: Yes,this one works well.The front audio was set on first boot.
I made a stripped down quirky 1.2 a few months ago with woof, 78mb
iso. I noticed it on the shelf yesterday and had some fun last night
by adding seamonkey 2.0.14 and cmus 2.4, also PupSnap and a couple of
other things, remastered the cd and the iso is now 94 mb.I've made more pets
this morning,audacious and a game.It even works on my newest pc but
has to use the vesa driver and the resolution is wrong but what the
heck.
Puppy is cool
Manual frugal install is how i use Puppy - i have never tried a full install or even a CD/DVD install of puppy, i do have a USB install as back up just in case my hard drive dies.James C wrote:
I do manual install's which means I don't use a cd. Anyway, I burned a cd of 525-02 and it booted (pfix=ram) straight to a working desktop. No prompt.
Still had to configure internet but sound and display work from the cd.
Timing issue?
I don't know why it would work from a CD but not a frugal install - like you say maybe some kind of timing issue, something (audio) not loading in time and having a knock on effect ?
Playdayz posted this above - i wouldn't be able to make heads nor tails of it but maybe some one who knows about such things might see it.
/var/log/Xorg.0.log might have useful info. You could rename it from the command line after it fails to boot cp /var/log/org.0.log /var/log/Xorg.fail or something so that it doesn't get overwritten when you successfully use xorgwizard.
Re: DEVX and Instant Update ?
Hi Hesse James,Hesse James wrote:Hi Stu
So far your Puplets works ok for me (btw the first one with 2.6.38). For development reasons which DEVX would you recommend ? I have taken the standard lupu_devx_525.sfs and renamed it into lupu_devx_526.sfs to make it working. Is this your recommended version ?
Additional question: is the actual 5.25 Instant Update installed or do I have to apply this on a fresh "lite" install ?
Thanks in advance for a short notice.
Christian
Thanks for testing - im afraid i never kept the devx for those previous builds - im not sure what the correct procedure is or if it safe, advised to use devx from a different build or kernel version?
As lucid lite 004 will be around for a few days i have upload the devx for that one - it is called lupu-devx-525 but it was made with 004 build so it is the right one for that.
cheers.
- Iguleder
- Posts: 2026
- Joined: Tue 11 Aug 2009, 09:36
- Location: Israel, somewhere in the beautiful desert
- Contact:
My 2.6.38.5 got messed up and I haven't tried the second attempt, but I think I'll abandone it for now, because 2.6.39 should be quite good and because I'm working on a tweaked 2.6.32 which should be very good - I remember I got sound working for pretty much anyone when I developed Puppy Squeeze.
Had to abandon both because my personal life got too messy.
The tweaked 2.6.32 comes with a build script that can build any 2.6.32.x, which makes things quite fun
It could be useful on the IcePuppy and Lite front, with 2.6.38+ - someone could tweak it to match this kernel. I'll post this script once I get everything working, I'm doing the first build atm. All we need is a working .config for the kernel series and matching patches (which are very easy to obtain or generate).
Had to abandon both because my personal life got too messy.
The tweaked 2.6.32 comes with a build script that can build any 2.6.32.x, which makes things quite fun
It could be useful on the IcePuppy and Lite front, with 2.6.38+ - someone could tweak it to match this kernel. I'll post this script once I get everything working, I'm doing the first build atm. All we need is a working .config for the kernel series and matching patches (which are very easy to obtain or generate).
[url=http://dimakrasner.com/]My homepage[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]
Problem booting a 2.8GHz Celeron with SIS MB video
System is booting from Live media to X desktop (pfix=ram). When arrival at desktop, mouse is frozen and keyboard doesn't respond.
System has 1GB RAM, 2.8GHz Celeron with SIS MB video.
Edited 1: When I boot with pfix=nox, it goes to text based select Keyboard screen and keyboard is frozen. Arrow keys, enter key, nothing works. Power off button, only.
What would be a recommended course of action?
Edited 2: OK, it appears that it doesn't like my USB keyboard+mouse coming thru the KVM.
Thanks in advance
System has 1GB RAM, 2.8GHz Celeron with SIS MB video.
Edited 1: When I boot with pfix=nox, it goes to text based select Keyboard screen and keyboard is frozen. Arrow keys, enter key, nothing works. Power off button, only.
What would be a recommended course of action?
Edited 2: OK, it appears that it doesn't like my USB keyboard+mouse coming thru the KVM.
Thanks in advance
-
- Posts: 60
- Joined: Sat 22 Jan 2011, 07:50
can't run lupu525lite on virtual box!! (because the kernel).
can run via pxeboot to client computers. Can run inkscape portable, can run firefox 3.6.
But, can not detect my LAN.
My hardware : amd sempron 140, pci : nVidia Corporation MCP61 ethernet (rev a2). I try with dhcpcd, I try network setup, but can not identify LAN, and need load module? No problem with lupu520.
can run via pxeboot to client computers. Can run inkscape portable, can run firefox 3.6.
But, can not detect my LAN.
My hardware : amd sempron 140, pci : nVidia Corporation MCP61 ethernet (rev a2). I try with dhcpcd, I try network setup, but can not identify LAN, and need load module? No problem with lupu520.
- Attachments
-
- aa.png
- (13.08 KiB) Downloaded 743 times
-
- Posts: 60
- Joined: Sat 22 Jan 2011, 07:50
stifiling. No reason. It was forgotten. All other usb modules were selected, btusb was left out. Just selection error - human error - or something else.
I will compile btusb as installable pet package for lupe22 kernel. I wont support afterwards previous kernels because lupe22 was important upgrade in many ways. If missing modules are found, I appreciate if you report them.
Thanks.
I will compile btusb as installable pet package for lupe22 kernel. I wont support afterwards previous kernels because lupe22 was important upgrade in many ways. If missing modules are found, I appreciate if you report them.
Thanks.
For kernel lupe22 missing bluetooth usb modules are now compilded and I have reuploaded the lupe22 kernel.
- Attachments
-
- bluetoothusb-2.6.38.4-lupe22.pet
- (16.32 KiB) Downloaded 513 times