Wary Puppy 5.0.4 (5.1 RC)
I always switch geany to UTF-8
When document is not saved with error I change encoding in menu. I thought it was normal.
-
Béèm
- Posts: 11763
- Joined: Wed 22 Nov 2006, 00:47
- Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win
Internet connection not working.
Internet connection not working.
I can come to the desktop just fine.
But I can't configure my WiFi connection (ipw2100 and tried SNS)
Lucid 520 connects without problem.
As I am in a vacation complex, I don't know which router/access point is used, but Lucid working ok, that shouldn't be the cause probably.
Following is the log.
I can come to the desktop just fine.
But I can't configure my WiFi connection (ipw2100 and tried SNS)
Lucid 520 connects without problem.
As I am in a vacation complex, I don't know which router/access point is used, but Lucid working ok, that shouldn't be the cause probably.
Following is the log.
Code: Select all
Information about this interface:
Interface: eth1 Driver: ipw2100 Bus: pci MacAddress: 00:04:23:78:FF:A2
Description: Intel(R) PRO/Wireless 2100 Network Driver
STEP1a: ifconfig eth1 up
STEP1b: iwlist eth1 scan
eth1 Scan completed :
Cell 01 - Address: 00:08:A1:BC:F1:1A
ESSID:"BB2"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:58 Signal level:0 Noise level:0
Extra: Last beacon: 1188ms ago
Cell 02 - Address: 00:25:9C:24:19:4E
ESSID:"1aWavenet_Hotspot_AM1"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:31 Signal level:0 Noise level:0
Extra: Last beacon: 2532ms ago
Cell 03 - Address: 00:08:A1:C1:22:85
ESSID:"BB3"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.452 GHz (Channel 9)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:31 Signal level:0 Noise level:0
Extra: Last beacon: 1680ms ago
Cell 04 - Address: 00:15:6D:F6:75:DA
ESSID:"Wavenet_Hotspot_AM8"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:51 Signal level:0 Noise level:0
Extra: Last beacon: 720ms ago
Cell 05 - Address: 00:25:9C:24:16:7B
ESSID:"1aWavenet_Hotspot_AM2"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:46 Signal level:0 Noise level:0
Extra: Last beacon: 236ms ago
Cell 06 - Address: 00:25:9C:CF:F9:34
ESSID:"1aWavenet_Hotspot_AM3"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:51 Signal level:0 Noise level:0
Extra: Last beacon: 232ms ago
Cell 07 - Address: 00:25:9C:CF:F8:A7
ESSID:"1aWavenet_Hotspot_AM7"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:25 Signal level:0 Noise level:0
Extra: Last beacon: 3504ms ago
Cell 08 - Address: 00:25:9C:CF:F9:61
ESSID:"1aWavenet_Hotspot_AM4"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:23 Signal level:0 Noise level:0
Extra: Last beacon: 3976ms ago
STEP1c: ifconfig eth1 down
STEP2: iwconfig eth1 mode managed
STEP3: iwconfig eth1 channel 11
Error for wireless request "Set Frequency" (8B04) :
SET failed on device eth1 ; Operation not supported.
STEP4: iwconfig eth1 essid "BB2"
STEP5: iwconfig eth1 key restricted bbabr
STEP5a: ifconfig eth1 up
ERROR, TIMEOUT. Have not got an Access Point.
Result of 'iwconfig eth1':
eth1 unassociated ESSID:"BB2" Nickname:"ipw2100"
Mode:Managed Channel=0 Access Point: Not-Associated
Bit Rate:0 kb/s Tx-Power:16 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:0000-0000-0000-0000-0000-0000-00 Security mode:restricted
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
STEP5: iwconfig eth1 key open bbabr
STEP5a: ifconfig eth1 up
STEP6a: dhcpcd eth1
Error, eth1: timed out
Error, eth1: lease information file `/var/lib/dhcpcd/dhcpcd-eth1.info' does not exist
Warning, eth1: using IPV4LL address 169.254.96.240
STEP6b: dhcpcd -I '' eth1
Error, eth1: timed out
Warning, eth1: using IPV4LL address 169.254.96.240
*********************************************************
LAST 10 LINES of /var/log/messages:
Feb 20 16:38:53 puppypc local0.err dhcpcd[20776]: eth1: timed out
Feb 20 16:38:53 puppypc local0.info dhcpcd[20776]: eth1: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth1.info'
Feb 20 16:38:54 puppypc local0.warn dhcpcd[20776]: eth1: using IPV4LL address 169.254.96.240
Feb 20 16:38:54 puppypc local0.info dhcpcd[20776]: eth1: adding IP address 169.254.96.240/16
Feb 20 16:38:54 puppypc local0.info dhcpcd[20776]: eth1: exiting
Feb 20 16:39:16 puppypc local0.err dhcpcd[21057]: eth1: read: Network is down
Feb 20 16:39:16 puppypc local0.info dhcpcd[21446]: eth1: sending signal 1 to pid 21057
Feb 20 16:39:16 puppypc local0.err dhcpcd[21057]: eth1: received SIGHUP, but we no have lease to release
Feb 20 16:39:16 puppypc local0.info dhcpcd[21057]: eth1: removing IP address 169.254.96.240/16
Feb 20 16:39:16 puppypc local0.info dhcpcd[21057]: eth1: exiting
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
-
BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Wary Puppy 5.1 has been released. New Forum thread:
http://murga-linux.com/puppy/viewtopic.php?t=65028
Blog announcement:
http://bkhome.org/blog/?viewDetailed=02149
http://murga-linux.com/puppy/viewtopic.php?t=65028
Blog announcement:
http://bkhome.org/blog/?viewDetailed=02149
[url]https://bkhome.org/news/[/url]