Quickset Wary-5.1.1-01q the Final Release
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
pressing 'Insert' key crashes Seamonkey on w504q-k.2.6.32.28
Re-bonsoir shinobar !
Aaargh..! accidentally pressing the 'Insert' key crashes Seamonkey WHEN at writing or editing a post in this forum ! (... what has already been written is ... lost )
That's an old story see here:
http://www.murga-linux.com/puppy/viewto ... 863#298863
and here
http://www.murga-linux.com/puppy/viewto ... 2ff9457365
Hope this helps
Charlie
Aaargh..! accidentally pressing the 'Insert' key crashes Seamonkey WHEN at writing or editing a post in this forum ! (... what has already been written is ... lost )
That's an old story see here:
http://www.murga-linux.com/puppy/viewto ... 863#298863
and here
http://www.murga-linux.com/puppy/viewto ... 2ff9457365
Hope this helps
Charlie
-
- Posts: 544
- Joined: Thu 22 Jan 2009, 14:20
Are you allright ?
Off topic, but
are you allright shinobar. Yes i see you posted today not sure which time that is.
Let us know whether you are out of the disaster that hit Japan just now.
are you allright shinobar. Yes i see you posted today not sure which time that is.
Let us know whether you are out of the disaster that hit Japan just now.
Re: Are you allright ?
Thanks nancy and charlie.
i am fine ... unless pressing [Insert] key.
i am fine ... unless pressing [Insert] key.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Shinobar Japan
Hi Shinobar.
Hope you and your family are O.K.
Nobody can say when and where on Earth this can happen .
All the best .
Hope you and your family are O.K.
Nobody can say when and where on Earth this can happen .
All the best .
Wary-505q(RC)
There are still bug, insert key kills seamonkey, but currently i cannot re-compile the Gtk. The versions of seamonkey and some zigberts applications are outdated. But i think we have come to the time to release the final quickset wary as is. Further update shall be in future release.
Therefore, the Wary-505q is the Release Candidate of Quickset Wary-5.1.1.
Calling for your help on the final test.
CHANGES(504q to 505q):
Therefore, the Wary-505q is the Release Candidate of Quickset Wary-5.1.1.
Calling for your help on the final test.
CHANGES(504q to 505q):
- Fixed additional samba server was not working.
It is a mystery but the wary-504q could not run the samba server. I rebuild the wary-505q from the 503q. - i915.conf commented out(thanks to charlie)
- Fixed /var/tmp was wrong permition
- Update sfs_loader-1.0, sfs loaded under RAM mode was not persist after making pupsave
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
review of quickset wary505
Review of quickset wary 505q:
It works fine on my IBM M41 desktop with nvidia Geforce2 mx400
screen resolution 1440x900
...but here is a minor problem.
I installed a fresh 'frugal' installation.
When I first booted up, I got the regular 'firstrun' window.
I chose French (even though I knew that my language pack was
on my USB stick.)
I clicked on 'xorgwizard' to get a higher resolution.
I then went through the regular procedure. I was asked
'Where was my language pack?' I mounted my USB stick and used the
dialog box to find the language pack. However I discovered that
at a screen resolution of 800x600 the OK button was partially hidden.
(see picture)
I know that this is an odd situation, but I thought that I'd report it anyway.
By the way xorgwizard does work in changing the resolution to
1440x900
.... and it is important to remember to unmount the USB stick to
avoid error messages later on.
EDIT: Change the final line to read 'unmount the ISO where the language pack
is located, so that I can unmount the USB stick safely.
____________________________________________________________
It works fine on my IBM M41 desktop with nvidia Geforce2 mx400
screen resolution 1440x900
...but here is a minor problem.
I installed a fresh 'frugal' installation.
When I first booted up, I got the regular 'firstrun' window.
I chose French (even though I knew that my language pack was
on my USB stick.)
I clicked on 'xorgwizard' to get a higher resolution.
I then went through the regular procedure. I was asked
'Where was my language pack?' I mounted my USB stick and used the
dialog box to find the language pack. However I discovered that
at a screen resolution of 800x600 the OK button was partially hidden.
(see picture)
I know that this is an odd situation, but I thought that I'd report it anyway.
By the way xorgwizard does work in changing the resolution to
1440x900
.... and it is important to remember to unmount the USB stick to
avoid error messages later on.
EDIT: Change the final line to read 'unmount the ISO where the language pack
is located, so that I can unmount the USB stick safely.
____________________________________________________________
Last edited by don570 on Sat 19 Mar 2011, 19:32, edited 1 time in total.
SEaMonkey problem in WARY
Barry reports a problem and Shinobar also reports problem with builds and stability in SeaMonkey.
Shinobar had bult a "combined with Flash" SM last year which when I used it, seem to remember that SM problems disappeared.
Maybe its time to have a combined SM from Shinobar for this community to install and use via PPM. Whatever was done that eliminated SM problems before, maybe should resolve problems again.
Hope this helps.
P.S. I just noticed that SM is up to 2.0.12!
Shinobar had bult a "combined with Flash" SM last year which when I used it, seem to remember that SM problems disappeared.
Maybe its time to have a combined SM from Shinobar for this community to install and use via PPM. Whatever was done that eliminated SM problems before, maybe should resolve problems again.
Hope this helps.
P.S. I just noticed that SM is up to 2.0.12!
Report why system is not seeing $GB
I have booted 505q in LiveDVD mode and I am not seeing all of the system's 4GB of RAM. See this.
Question: Where is the system's boot log? I would like to present that for review because I think if would help ID these problems..
Separately, 505q is not detecting the active Ethernet connection on eht1 of the system. I thought this was solved. (I have my LAN cable attached to eth1 on the MB; there is NO Ethernet cable in eth0.) "Personalize-Settings" is not detecting missing IP addressing.
I believe these to be general WARY problems.
These are NOT show-stoppers but, should be addressed at some point.
Hope this helps.
Question: Where is the system's boot log? I would like to present that for review because I think if would help ID these problems..
Separately, 505q is not detecting the active Ethernet connection on eht1 of the system. I thought this was solved. (I have my LAN cable attached to eth1 on the MB; there is NO Ethernet cable in eth0.) "Personalize-Settings" is not detecting missing IP addressing.
I believe these to be general WARY problems.
These are NOT show-stoppers but, should be addressed at some point.
Hope this helps.
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Bonjour shinobar!
thanks again for those new wary 505q!
Now please read here: rerwin's March 14 second post
http://murga-linux.com/puppy/viewtopic. ... &start=585
+ download i915_modeset0-0.1.pet here:
http://murga-linux.com/puppy/viewtopic. ... h&id=38957
I believe adding rerwin's i915_modeset0-0.1.pet fixes it
I installed that pet just after safe mode bootup, before doing the personalize setup.
Now Ctrl-alt-backspace returns to command line without black screen anymore.
Thankx to rerwin!
Cheers, charlie
ps: People in Japan are in our daily thoughts.
thanks again for those new wary 505q!
same problem with 504q and 505q.charlie6 wrote:...only ... with "Intel Corporation" Board "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
I could start from live-cd till the locale setup. Upon X server restarting, the display kept being black, even after doing Ctrl-backspace to restart X server .
Now please read here: rerwin's March 14 second post
http://murga-linux.com/puppy/viewtopic. ... &start=585
+ download i915_modeset0-0.1.pet here:
http://murga-linux.com/puppy/viewtopic. ... h&id=38957
I believe adding rerwin's i915_modeset0-0.1.pet fixes it
I installed that pet just after safe mode bootup, before doing the personalize setup.
Now Ctrl-alt-backspace returns to command line without black screen anymore.
Thankx to rerwin!
Cheers, charlie
ps: People in Japan are in our daily thoughts.
Quickset/Multilingual Wary-5.1.1
The Release Candidate is available.
http://shino.pos.to/party/bridge.cgi?puppy/wary/
The seamonkey is still old version and crashes by insert-key.
But this will be the final unless serious bugs found.
without lang_pack. Download size 101MB.
8d7827e278232b3af425c27e2ca4cda1 wary-511q-k2.6.32.28-small.iso
with lang_pack. Download size 192MB.
3f591b487f461c6dcd2ab230166d0f88 wary-511m-k2.6.32.28-small.iso
CHANGES(505q to 511q):
New transration(511m): Polish(thanks to robwoj44, but sorry for lacking some like aqualung, mhwaveedit and ayttm)
http://shino.pos.to/party/bridge.cgi?puppy/wary/
The seamonkey is still old version and crashes by insert-key.
But this will be the final unless serious bugs found.
without lang_pack. Download size 101MB.
8d7827e278232b3af425c27e2ca4cda1 wary-511q-k2.6.32.28-small.iso
with lang_pack. Download size 192MB.
3f591b487f461c6dcd2ab230166d0f88 wary-511m-k2.6.32.28-small.iso
CHANGES(505q to 511q):
- Intel 845G fix(rerwin, thanks to charlie), revert /etc/rc.d/rc.sysinit to the one of wary-503q, removed /etc/modprobe.d/i915.conf
- Update sfs_load-1.1 was failed the launcher
New transration(511m): Polish(thanks to robwoj44, but sorry for lacking some like aqualung, mhwaveedit and ayttm)
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Seamonkey, PPLOG
Seamonkey on wary-511q-k2.6.32.28-full.iso seems not working.
PPLOG on wary-511q-k2.6.32.28-small.iso seems not working.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Bonjour shinobar!
that's good to read from you ...!
*** For information only ***
Reminder: on wary-505q the bootup black screen could be fixed installing forum member i915_modeset0-0.1.pet
This happened with "Intel Corporation" Board "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device".
*** New ***: forum member rerwin has updated his pet to i915_modeset0-0.2.pet ( ...thanX Richard !)
read page 62, post Nr.6 by march 27th, thread «Announcing Luci-257 ... »
here:
http://www.murga-linux.com/puppy/viewto ... &start=915
download here:
http://www.murga-linux.com/puppy/viewto ... h&id=39306
Cheers, charlie
that's good to read from you ...!
*** For information only ***
Reminder: on wary-505q the bootup black screen could be fixed installing forum member i915_modeset0-0.1.pet
This happened with "Intel Corporation" Board "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device".
*** New ***: forum member rerwin has updated his pet to i915_modeset0-0.2.pet ( ...thanX Richard !)
read page 62, post Nr.6 by march 27th, thread «Announcing Luci-257 ... »
here:
http://www.murga-linux.com/puppy/viewto ... &start=915
download here:
http://www.murga-linux.com/puppy/viewto ... h&id=39306
Cheers, charlie
Intel driver
Merci charlie.charlie6 wrote:Reminder: on wary-505q the bootup black screen could be fixed installing forum member i915_modeset0-0.1.pet
This happened with "Intel Corporation" Board "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device".
*** New ***: forum member rerwin has updated his pet to i915_modeset0-0.2.pet ( ...thanX Richard !)
wary-511q-k2.6.32.28-small.iso is already implemented the Richard's fix thanks to your information. Please test 511q.
We are now investigating the mystery of PPLOG on 511q and the seamonkey on 511q-full.
As for the PPLOG, it was working on 500m09 but is not working on the later versions.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Re: Intel driver
Sure you saw Barry's blog for SeaMonkey 2.0.13. Could you also include 2.1.b2 PET when you make your change.shinobar wrote:... wary-511q-k2.6.32.28-small.iso is already implemented the Richard's fix .. Please test 511q.
We are now investigating the mystery of ... seamonkey on 511q-full
Hope this helps.
Re: Seamonkey-fix
Found the fix for the seamonkey on 511q-full.
The file /usr/lib/seamonkey-2.0.12/seamonkey on 511q-full is broken.
Replace the file with the attached. This fix is only for the 511q-full. You need not as for the 511q-small.
Thanks gcmartin.
The file /usr/lib/seamonkey-2.0.12/seamonkey on 511q-full is broken.
Replace the file with the attached. This fix is only for the 511q-full. You need not as for the 511q-small.
The SeaMonkey 2.0.13 of Barry's is without mail, but you can use them as an option.gcmartin wrote:Sure you saw Barry's blog for SeaMonkey 2.0.13. Could you also include 2.1.b2 PET when you make your change.
Thanks gcmartin.
- Attachments
-
- seamonkey-fix.tar.gz
- /usr/lib/seamonkey-2.0.12/seamonkey fix for the 511q-full only.
ensure the executable permission. - (1.82 KiB) Downloaded 721 times
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi,
have installed wary-511m-small-iso on different PC's.
Starting from live-cd and with pfix=ram, again black screen at bootup after setup of personalize settings.
This here occurs only on several identical PC's featured with intel 82845 video card.
Not any problem if starting in 'safe mode'.
It as not that so a major problem as once the 'pupsave' ...ooops! the 'warysave' file is created (case of frugal install), the problem does not seem to occur anymore even if doing Ctrl-Alt-Backspace.
Cheers, Charlie
have installed wary-511m-small-iso on different PC's.
Starting from live-cd and with pfix=ram, again black screen at bootup after setup of personalize settings.
This here occurs only on several identical PC's featured with intel 82845 video card.
Not any problem if starting in 'safe mode'.
It as not that so a major problem as once the 'pupsave' ...ooops! the 'warysave' file is created (case of frugal install), the problem does not seem to occur anymore even if doing Ctrl-Alt-Backspace.
Cheers, Charlie
Video issues
Wary 511q (full) seems to work fine. No issues as all items are intact. But I would like to report a video performance observation on a laptop with the Intel 82845 chipset. This MAY be present as well in WARY. I will have to test that.
I have produced a report using this WARY to show video findings. Could be useful in identifying your video problem(s). Test you see, there, are run on 511q-FULL. And are repeatable and verifiable..
Edited: I rebooted system pfix=ram i915.modeset=1 and got a different set of performance numbers and an erratic jumpy desktop.
Hope this helps.
I have produced a report using this WARY to show video findings. Could be useful in identifying your video problem(s). Test you see, there, are run on 511q-FULL. And are repeatable and verifiable..
Edited: I rebooted system pfix=ram i915.modeset=1 and got a different set of performance numbers and an erratic jumpy desktop.
Hope this helps.
Last edited by gcmartin on Wed 30 Mar 2011, 01:08, edited 2 times in total.