(old)Puppy Linux Discussion Forum

The seven_in_one is i18n scripts for wary-500(, but also may work on any Puppy-4.x/5.x).
It contains 7 domains: bootflash, dotpup, pup_event, puppyinstaller, usr_sbin, welcome, xorgwizard
It also contains gxmessage-gtkdialog-splash for utf-8 support.
The wary_po_files is the correction of .po files available now.
The wary_po_files contains .po files for the seven_in_one plus 6 more: countrywizard, ffconvert, frugalinstaller, grub4dosconfig, jwm, puppy-desktop

They are based on the ones by L18L and rodin.s and i shinobar merged and midified.
Note that the text domain is changed form that of rodin.s, so the 'ru.po' files may need to restructure.
Other .po files should also be refined because some may be outdated.
Another note: the jwm in wary does not currently support i18n.

DOWNLOWDS:

• seven_in_one-20110106.tar.gz
• wary_po_files-20110106.tar.gz

All available here.

EDIT: /usr/bin/xmessage was missing. Remove the link /usr/bin/xmessage, and make a new link to gxmessage at /usr/bin/xmessage.

Hi Shinobar.
I downloaded Wary-500 and so far so good .
Another nice work the same like LUPQ-511.
Thanks.

Here is german updated po and mo for ppm.

for all languages:
- I have made a new package_descr.pot from all Packages. You can translate and use it. It will show your translation of Package Description.

- there is no 'trim the fat' for NLS packages !
Please apply the small change posted already in
http://www.murga-linux.com/puppy/viewto ... 777#464777
Nobody wants all languages or do you?

Have fun

I'm continuing to use wary500j02.iso

Two more observations:

1) When I boot up (pfix=ram) and chose the Japanese keyboard layout
I have no black screen problem as previous mentioned.

2) I wasn't able to get my Wacom Bamboo tablet to work.
I tried several drivers that are available in the forum but no success.
When I looked in /dev I didn't see a file named 'Event5' which
other Puppies use to connect my wacom tablet to the operating system.

I assume that you are using a different method to connect USB devices
to the operating system.

____________________________________________________

Here is german updated po and mo for ppm.

for all languages:
- I have made a new package_descr.pot from all Packages. You can translate and use it. It will show your translation of Package Description.

- there is no 'trim the fat' for NLS packages !
Please apply the small change posted already in
http://www.murga-linux.com/puppy/viewto ... 777#464777
Nobody wants all languages or do you?

Have fun

here it is

here it is

here it is
Here it should be, but
will try it later.

Wary-500j03 is available.

New i18n scripts thanks to rodin.s and others.
But sorry, L18L's recent update not included.

TRANSRATION
The .pot files of i18n scripts are at /usr/share/doc/nls.
We are calling for the ranslation of any language. Post the .po file as the reply of this topic.

OTHER UPDATES

• Fixed was alsaconf no modprobe. Improved sound recognition. See the related
• Fixed was geany not able to read samba shared text. See the related.
• Fixed was right click open with gtkhash filed. Now gtkhash is a link to shasher.
• Fixed was firstrun(xrandrshell) crash with multiple monitors.
• Minor updated pupsaveconfig
• Offers xorgwizard at the boot with 'pfix=nox'

The wary-500j03 offers xorgwizard at the boot with 'pfix=nox' option.
If you choose 'Advance Menu' > 'Safe mode' at the live CD boot menu, the Wary boots with 'pfix=nox' option.
You will be asked the keyboard kayout, then be offered 'xorgwizard'.

This sequence is useful for some PC need to choose graphic driver at boot.

screenshot shows that the translated package_descr is shown only when NLS is ticked. You can tick and untick and the change happens.
But nobody will tick NLS by default (I did not).
After long research I found the simple solution:

filterpkgs.sh 31 ff. The nice changing of the description from translated to untranslated when ticking or unticking does not happen anymore.

I know, the translation of package description is not very important but because the translation of ppm is my baby I feal responsible to get it running completly!

Hi.
When i try to setup "Change mouse and keyboard-Advanced Xorg keyboard configuration-Layouts-Layouts variants-{ I need bgphonetic},nothing happens.
With previous version i could do that.
Greetings.

I tried wary-500j03.iso
Here's my observations.

1) I booted (pfix=ram) and chose English . I clicked 'ok'.
Then I chose US English variant . I get a warning message that stays
on the screen about 5 seconds then the screen turns completely black.
I click and everything proceeds normally.

2) If I choose (at bootup) the 'xorg' option (by ticking) then I am told
to type 'xorgwizard' in the console. Everything proceeds well if I do
this.
____________________________________________________________

Suggestion: Your warning message shouldn't say that the screen will
'flash'. The word 'flash' means a burst of light. Instead the screen
turns black.

Also the 'ok' button at the bottom of the warning message doesn't seem
to do anything so it's just causing confusion.

__________________________________________________

Gettexted six pupdial scripts. Working on ru.po files (wary_po_files-20110106.tar.gz) but want to test them before posting.

UPDATE: wary-500j04.iso

See also CHANGES(j05)
IMPORTANT CHANGE
The intrd.gz is modified from the original.
# 9jan11 shinobar: search files including symlinks, allow 'pmedia=cd' on other drives for UNetBootin
# 9jan11 shinobar: mount main and driver sfs last (gyro), PUPMODE=6/12 for 'pmedia=usbhd'
EDIT: mounting the main sfs is reverted to the upper layer for the compatibility with the original(j05)

1. The main sfs is mounted at the lowest layer.
   It means the additional sfs can override the files contained in the main.
   It is similar as PET, but note that the additional sfs cannot override PET's.
   This order differs from the original, but the same as LupQ and Japanese versions 4.3.1 and later.
2. The wary-500j04 supports UNetBootin.
   Whereas the original wary-500 and wary-500j03 and olderfails UNetBootin install(needs to manually modify syslinux,cfg).
3. The wary-500j04 accept 'pmedia=usbhd' boot option.
   The original wary and most of Puppies always run as if from usbflash for all the USB devices no matter we give the 'pmedia=usbhd' boot option.
   wary-500j04 runs under 'PUPMODE=12' if 'pmedia=usbhd' boot option is given. It makes faster shutdown for the install on USB-HDD.

You are expected to test various install and feed back to this topic.

SLIM DOMN MENU
Meny applications are removed, but not really. They are removed only from the menu.
They will be truly removed next time. List of the deleted applications
We would like to hear your discussion on sliming down the applications.

FIXES/IMPROVEMENT

• Fixed was not work Advanced Xorg keyboard variants(thanks to yordanj94)
• Fixed pnethood was failed to mount Windows 7 shared flder - EDIT: not fixed yet... fixed at j05.
• acpid supports power button and lid close(depends on the hardware)
• fixmenus_on_locale was got black screen in some occasion
• Kanji-key(jp-106) was not work with Xvesa
• Urxvt scroll bar to the right side
• Keymap selection 'us' or 'jp106' to be shown near the top

NEW/UPDATE I18N

• pupdial by rodin.s
• Package-Descriptions by L18L
• The message at changing timezone thanks to don570
• jwm i18n
• /usr/share/doc/nls/alsaconf/alsaconf.pot

The Simple Network Wizard(SNS) is removed in wary-500j04.
The reason is simply it does not work for me.

SNS does not support fixed IP, it may be one of the reason it is called 'simple'.
For the reason, the SNS assumes it is used with the help of the Network Wizard.

This situation makes the things complicated.
The original wary offers SNS first. If i try it and suppose got success, then it asks to set it as the default connecting tool. Its not so bad.
If i failed with the SNS, it offers next try with other tool. I try Network Wizard and suppose got success, it asks again to set it as the default connecting tool.
Long journey!

TO DO:

• Slim down the applications
• Improve the switching Xvesa to Xorg (Now requires typing as don570 reported)
• Improve sound driver detection (Now fails sometime)

Hi Shinobar.
Live DVD first boot .
When i choose my settings "1024-768-24" and was asked to restart,
i did it and nothing ,just blank screen asking me to type xwin or xorgwizard .
I did it and again had the same blank screen .
Xwin again restart and finally got what i wanted after two restarts.
Second i can't start "CPU Frequncy Scaling tool"

Changed ru.po files. Send them back in the same archive.

The list of the deleted(from the menu) applications from wary-500j03 to j04:

• Simple Network Wizard --> Network Wizard is for the replacement
• Chooselocale-country-localisation --> Country Settings
• DidiWiki-personal-wiki --> PPLOG
• e3-console-editor --> 'vi' command from urxvt
• gcolor2 : need you?
• gFnRename --> PRename
• ISOMaster-iso-file-editor : need you?
• lameSMBqmount --> pnethood
• lameSMBxplorer --> pnethood
• MP-console-editor --> 'vi' command on urxvt
• Pdisk-partition-manager --> 'fdisk' command on urxvt
• peasyscan --> Xsane
• pstopwatch --> ptimer
• Secure-ssh-telnet --> Ssh gui, or 'ssh' command on urxvt
• Set-hwclock-type --> Country Settings
• Set-timezone--> Country Settings
• snap2 --> Pbuckup
• snap2-run --> Pbuckup
• Superscan-network-scanner : need you?
• WakePup2 : anyway we need to install from PPM
• Xclipboard --> Glipper
• you2pup : Does work?

Another candidate to be deleted:

• Ayttm -> Pidgin
• Pmusic --> Mplayer

Like to hear your discussion.