UCF2FS Pup 32-bit Released 28th Jan 2015 - Netflix
UCF2FS Pup 32-bit Released 28th Jan 2015 - Netflix
UCF2FS Pup – Released 28th January 2015
Overview & Slideshow:
https://drive.google.com/folderview?id= ... sp=sharing
This Pup uses as its base the alternate f2fs image of 666philb's Unicorn-6.0 building block puplet. It may be best described as a big brother to ChromeCast Pup V3 but is suitable for larger monitors.
The changes to the base image are mainly cosmetic but the following have been added:
• Latest version of Chrome stable. (Full sandboxing)
• Latest versions of Videostream, Google Cast, & a locally held version of Sid’s cast.
• Latest Thunderbird.
• Leafpad.
• FbBox-1.0.
• Netflix.
• Optional Popcorn Time pet. (Automatic update once installed)- Withdrawn 26th Oct 2015 as service defunct.
• Optional pet (GetLatestChromeVersion-V2.pet) to keep Chrome updated.
The intended target is a 8GB or larger USB2 or USB3 stick.
The image ucf2fs_pup.img.xz 287MB, MD5sum and install procedure can be found in the link above.
Setup:
Ethernet.
On first boot there will be a red cross on the system tray network icon.
1. Click on the “Lan
Overview & Slideshow:
https://drive.google.com/folderview?id= ... sp=sharing
This Pup uses as its base the alternate f2fs image of 666philb's Unicorn-6.0 building block puplet. It may be best described as a big brother to ChromeCast Pup V3 but is suitable for larger monitors.
The changes to the base image are mainly cosmetic but the following have been added:
• Latest version of Chrome stable. (Full sandboxing)
• Latest versions of Videostream, Google Cast, & a locally held version of Sid’s cast.
• Latest Thunderbird.
• Leafpad.
• FbBox-1.0.
• Netflix.
• Optional Popcorn Time pet. (Automatic update once installed)- Withdrawn 26th Oct 2015 as service defunct.
• Optional pet (GetLatestChromeVersion-V2.pet) to keep Chrome updated.
The intended target is a 8GB or larger USB2 or USB3 stick.
The image ucf2fs_pup.img.xz 287MB, MD5sum and install procedure can be found in the link above.
Setup:
Ethernet.
On first boot there will be a red cross on the system tray network icon.
1. Click on the “Lan
Last edited by ETP on Sat 12 Mar 2016, 20:28, edited 10 times in total.
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
UCF2FS Pup – Released January 2015
Reserved for Additional info, tips & FAQ:
1. The Prt Scr key invokes PupSnap.
2. The black Retrovol speaker icon does not show up well with the default wallpaper.
To rectify this install the attached dotpet, then open up a terminal and type one of the following:TIP:
magenta looks O/K.
3. EDIT 14th Feb - Known problem.
Upon restarting X following for example a language change, the default wallpaper may be replaced by a grey GTK background.
To avoid or rectify that problem please download the wallpaper in the fix directory and place it in
/usr/share/backgrounds. Then reboot ensuring that you save the session.
https://drive.google.com/folderview?id= ... sp=sharing
4. EDIT 20th Feb - PPM Problem.
A service pack is attached which addresses a couple of issues in PPM.
Thanks go to forum member Billtoo for identifying the problem and to forum
member Radky for providing the solutions.
5. EDIT
For users of Netflix a pet (ucf2fsNetflixFix-V1)is available in the download folder to create a menu item.
The main icon can be dragged onto the desktop from usr/share/applications once the pet has been installed.
1. The Prt Scr key invokes PupSnap.
2. The black Retrovol speaker icon does not show up well with the default wallpaper.
To rectify this install the attached dotpet, then open up a terminal and type one of the following:
Code: Select all
# retrovol_speaker green
# retrovol_speaker blue
# retrovol_speaker yellow
# retrovol_speaker red
# retrovol_speaker orange
# retrovol_speaker cyan
# retrovol_speaker magenta
magenta looks O/K.
3. EDIT 14th Feb - Known problem.
Upon restarting X following for example a language change, the default wallpaper may be replaced by a grey GTK background.
To avoid or rectify that problem please download the wallpaper in the fix directory and place it in
/usr/share/backgrounds. Then reboot ensuring that you save the session.
https://drive.google.com/folderview?id= ... sp=sharing
4. EDIT 20th Feb - PPM Problem.
A service pack is attached which addresses a couple of issues in PPM.
Thanks go to forum member Billtoo for identifying the problem and to forum
member Radky for providing the solutions.
5. EDIT
For users of Netflix a pet (ucf2fsNetflixFix-V1)is available in the download folder to create a menu item.
The main icon can be dragged onto the desktop from usr/share/applications once the pet has been installed.
- Attachments
-
- SP1_For_UCF2FS_Pup.pet
- (11.76 KiB) Downloaded 437 times
-
- image-3.png
- (23.53 KiB) Downloaded 2586 times
-
- retrovol_speaker-0.1-i486.pet
- (3.37 KiB) Downloaded 461 times
Last edited by ETP on Mon 16 Mar 2015, 11:20, edited 3 times in total.
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
Netflix working then not working.
Hi Sylvander,
Chrome extensions are sometimes slow to update.
To force an update visit the Extensions page and tick developer mode.
Then click on the "Update extensions now" tab which will appear.
Allow a few minutes for all extensions to update.
Untick developer mode when they have.
Cast should move to 15.114.0.1 (Rollout commenced 28th January)
Videostream to 2.0.1.3 if not already on it. (Rollout commenced 29th January)
Also power cycle your Chromecast dongle as firmware version 22062
was rolled out starting on 20th January.
(You cannot check the version without the Android app but a power cycle
should ensure that it updates.)
Chrome extensions are sometimes slow to update.
To force an update visit the Extensions page and tick developer mode.
Then click on the "Update extensions now" tab which will appear.
Allow a few minutes for all extensions to update.
Untick developer mode when they have.
Cast should move to 15.114.0.1 (Rollout commenced 28th January)
Videostream to 2.0.1.3 if not already on it. (Rollout commenced 29th January)
Also power cycle your Chromecast dongle as firmware version 22062
was rolled out starting on 20th January.
(You cannot check the version without the Android app but a power cycle
should ensure that it updates.)
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
Re: Netflix working then not working.
1.
-----------------------------------------------------------------------------------------------------------------
Job done; "Google Cast" now fully functioning, video displaying on TV via Chromecast dongle.
-----------------------------------------------------------------------------------------------------------------
2.
What exactly does it mean to: "power cycle your Chromecast dongle"?
Will do, and report back when completed.ETP wrote:...To force an update visit the Extensions page and tick developer mode.
Then click on the "Update extensions now" tab which will appear.
Allow a few minutes for all extensions to update.
Untick developer mode when they have.
-----------------------------------------------------------------------------------------------------------------
Job done; "Google Cast" now fully functioning, video displaying on TV via Chromecast dongle.
-----------------------------------------------------------------------------------------------------------------
2.
I do not comprehend.ETP wrote:Also power cycle your Chromecast dongle as firmware version 22062...
What exactly does it mean to: "power cycle your Chromecast dongle"?
Last edited by Sylvander on Mon 02 Feb 2015, 11:53, edited 1 time in total.
1.
2.
Which Android app?
How do I check the version?
Done.ETP wrote:Unplug it from the TV & also remove the usb power supply from
the other end for a minute. Then connect it all up again.
2.
Could you explain what this means?ETP wrote:You cannot check the version without the Android app but a power cycle should ensure that it updates.
Which Android app?
How do I check the version?
Please see item 4 on list.
https://support.google.com/chromecast/a ... 0071?hl=en
https://support.google.com/chromecast/a ... 0071?hl=en
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
The Chromecast app is already version 22062, as is specified as the latest, so there's no need to update.
The "Chromecast" app was listed amongst the installed apps on the "Samsung Galaxy Tab-2" 10.1 tablet running Android-4.2.2.
Many thanks for your assistance.
I'm delighted.
Yet again your help has been much valued.
The "Chromecast" app was listed amongst the installed apps on the "Samsung Galaxy Tab-2" 10.1 tablet running Android-4.2.2.
Many thanks for your assistance.
I'm delighted.
Yet again your help has been much valued.
UCF2FS Pup – Released January 2015
The optional Popcorn Time dotpet for UCF2FS Pup has been updated to V2 and is based on version 0.3.7.2 that was released today.
If you have already installed the original pet you need do nothing as PT will automatically update.
Google Cast should now be on version 15.114.0.1
Videostream for Chromecast should be on version 2.15.2.13000
This Pup is suitable for anyone using a Chromecast dongle controlled from a large screened laptop or PC. For small wireless netbooks please see ChromeCast Pup.
The new pet & slideshow showing the features can be found here:
https://drive.google.com/folderview?id= ... sp=sharing
If you have already installed the original pet you need do nothing as PT will automatically update.
Google Cast should now be on version 15.114.0.1
Videostream for Chromecast should be on version 2.15.2.13000
This Pup is suitable for anyone using a Chromecast dongle controlled from a large screened laptop or PC. For small wireless netbooks please see ChromeCast Pup.
The new pet & slideshow showing the features can be found here:
https://drive.google.com/folderview?id= ... sp=sharing
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
UCF2FS Pup – Released January 2015 -Popcorn Time
New install to a 32gb SDHC card, pc is a lenovo ThinkCentre:
video-info-glx 1.5.3 Tue 17 Feb 2015 on unicornpup 6.0 Linux 3.14.20 i686
0.0 VGA compatible controller:
Advanced Micro Devices, Inc. [AMD/ATI] RV530 [Radeon X1600 PRO]
oem: ATI ATOMBIOS
product: RV530 01.00
X Server: Xorg Driver: radeon
X.Org version: 1.16.0
dimensions: 3200x900 pixels (846x238 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: X.Org R300 Project
OpenGL renderer string: Gallium 0.4 on ATI RV530
OpenGL version string: 2.1 Mesa 10.3.0
Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
Core 0: @2003 1: @2003 MHz
The only problem so far is after adding an application from PPM the
panel disappears,need to restart X to get it back.
video-info-glx 1.5.3 Tue 17 Feb 2015 on unicornpup 6.0 Linux 3.14.20 i686
0.0 VGA compatible controller:
Advanced Micro Devices, Inc. [AMD/ATI] RV530 [Radeon X1600 PRO]
oem: ATI ATOMBIOS
product: RV530 01.00
X Server: Xorg Driver: radeon
X.Org version: 1.16.0
dimensions: 3200x900 pixels (846x238 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: X.Org R300 Project
OpenGL renderer string: Gallium 0.4 on ATI RV530
OpenGL version string: 2.1 Mesa 10.3.0
Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
Core 0: @2003 1: @2003 MHz
The only problem so far is after adding an application from PPM the
panel disappears,need to restart X to get it back.
- Attachments
-
- image-1.jpg
- (25.68 KiB) Downloaded 2143 times
UCF2FS Pup – Released January 2015 -Popcorn Time
To test it's portability (and for something to do) I moved the verbatim
usb multi card reader to my mac mini and booted up UCF2FS Pup:
video-info-glx 1.5.3 Tue 17 Feb 2015 on unicornpup 6.0 Linux 3.14.20 i686
2.0 VGA compatible controller:
Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product: Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.16.0
dimensions: 1920x1080 pixels (507x285 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile x86/MMX/SSE2
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.3.0
Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz
Core 0: @1549 1: @1540 2: @1527 3: @1569 MHz
It went straight to the desktop,needed to run network setup for
eth0,using external speakers so ran alsamixer to set sound levels.
It's working well.
usb multi card reader to my mac mini and booted up UCF2FS Pup:
video-info-glx 1.5.3 Tue 17 Feb 2015 on unicornpup 6.0 Linux 3.14.20 i686
2.0 VGA compatible controller:
Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product: Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.16.0
dimensions: 1920x1080 pixels (507x285 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile x86/MMX/SSE2
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.3.0
Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz
Core 0: @1549 1: @1540 2: @1527 3: @1569 MHz
It went straight to the desktop,needed to run network setup for
eth0,using external speakers so ran alsamixer to set sound levels.
It's working well.
- Attachments
-
- image-3.jpg
- (48.21 KiB) Downloaded 2098 times
UCF2FS Pup – Released January 2015 -Popcorn Time
Hi Billtoo,
Thanks for testing this Pup. Your dual monitor setup seems to suit it.
More likely though is an issue with radky’s FbBox-1.0. that was originally issued on 3rd April 2014. The following post in that thread dated 11th January 2015 is the only similar report that I can find:
http://www.murga-linux.com/puppy/viewto ... 413#820413
Radky is currently working on FbBox-2.0 but when released recommends a new installation rather than adding to an existing FbBox-1.0 environment.
Finally I might have messed something up but I know not what!
Thanks for testing this Pup. Your dual monitor setup seems to suit it.
There are three possible suspects for that. In his original post on unicorn Pup upon which this is based, 666philb warned that installing udev & xkb-data could break things.The only problem so far is after adding an application from PPM the
panel disappears,need to restart X to get it back.
More likely though is an issue with radky’s FbBox-1.0. that was originally issued on 3rd April 2014. The following post in that thread dated 11th January 2015 is the only similar report that I can find:
http://www.murga-linux.com/puppy/viewto ... 413#820413
Radky is currently working on FbBox-2.0 but when released recommends a new installation rather than adding to an existing FbBox-1.0 environment.
Finally I might have messed something up but I know not what!
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
Re: UCF2FS Pup – Released January 2015 -Popcorn Time
I want to keep UCF2FS Pup on my mac mini so I made a new one for myETP wrote:Hi Billtoo,
Thanks for testing this Pup. Your dual monitor setup seems to suit it.
ThinkCentre desktop.
With the applications that come with it + xine,kdegames,others from PPM,
+ some pets smplayer,smtube (pets by scabz),this is one great pup
Thanks very much.
- Attachments
-
- image-.jpg
- (102.86 KiB) Downloaded 1943 times
Hi ETP and Billtoo,The only problem so far is after adding an application from PPM the
panel disappears,need to restart X to get it back.
UCF2FS is based on 666philb's original release of Unicorn-6.0 which has a developmental version of petget with numerous bugs (now fixed in Woof CE).
One of the Unicorn-6.0 petget bugs is incompatibilty with fbpanel and lxpanel when fixmenus is called after installing a package through PPM.
To 'fix' the fixmenus bug in UCF2FS, go to /usr/local/petget/installpreview.sh (line 478 of that version) and change:
Code: Select all
/usr/sbin/fixmenus
Code: Select all
nohup /usr/sbin/fixmenus
PS - After some delay, FbBox-2.0 is in final beta testing.
[color=blue][b][url=http://www.smokey01.com/radky/PupMates.html]PupMates[/url][/b][/color]
Hi Roger,radky wrote: To 'fix' the fixmenus bug in UCF2FS, go to /usr/local/petget/installpreview.sh (line 478 of that version) and change:toCode: Select all
/usr/sbin/fixmenus
ThanksCode: Select all
nohup /usr/sbin/fixmenus
I made the change and it solved the disappearing panel when installing from PPM, later on I uninstalled a package in PPM and the panel disappeared again but restarting X brought it back.
EDIT: Changing line 343 in /usr/local/petget/removepreview.sh in the same way as above fixed the disappearing panel when uninstalling a package in PPM.
Last edited by Billtoo on Fri 20 Feb 2015, 05:07, edited 1 time in total.
Hi Bill,
Go to /usr/local/petget/removepreview.sh (line 343 in that version) and change
to
Thanks
Go to /usr/local/petget/removepreview.sh (line 343 in that version) and change
Code: Select all
/usr/sbin/fixmenus
Code: Select all
nohup /usr/sbin/fixmenus
[color=blue][b][url=http://www.smokey01.com/radky/PupMates.html]PupMates[/url][/b][/color]
UCF2FS Pup – Released January 2015 -Popcorn Time
Hi radky,
Thanks for your fixes. I would never have found that one!
Thanks also to Billtoo for validating both fixes. I will issue a service pack dotpet containing both corrections.
Good luck with FbBox-2.0.
Edit:
Please see fourth item in the second post of this thread for service pack.
Thanks for your fixes. I would never have found that one!
Thanks also to Billtoo for validating both fixes. I will issue a service pack dotpet containing both corrections.
Good luck with FbBox-2.0.
Edit:
Please see fourth item in the second post of this thread for service pack.
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
I've gotten a situation on my desktop where the Chrome browser has disappeared from running on the desktop. And now, I am getting an Openbox errorbox stating "Failed to execute child process 'program-name' (No such file or directory).
This is after I have modified the target USB stick that is different from the USB stick that the UCF2FS system is running on.
GParted was executed ONLY on the stick that is to be used for a ChromeCastPUP and NOT on the stick that has UCF2FS. Gparted was run from the terminal.Question
Can someone verify that this occurs when they are using 2 USBs, one of which is the one the system booted from?
This is after I have modified the target USB stick that is different from the USB stick that the UCF2FS system is running on.
GParted was executed ONLY on the stick that is to be used for a ChromeCastPUP and NOT on the stick that has UCF2FS. Gparted was run from the terminal.
Code: Select all
# gparted /dev/sdd
Can someone verify that this occurs when they are using 2 USBs, one of which is the one the system booted from?
UCF2FS Pup – Released January 2015 -Popcorn Time
Hi gc,
I guess that you have left the system in stasis or shutdown without
saving in order to recover the situation.
to do so. Both menu entries and the .desktop file point to gparted_shell which is
a custom wrapper within Puppy. That in turn points at gparted which itself is a wrapper
that then calls the binary. (gpartedbin)
Launching gparted would circumvent the Puppy shell script with unpredictable results.
I guess that you have left the system in stasis or shutdown without
saving in order to recover the situation.
It is not clear why you ran gparted from a terminal but that is not the command# gparted /dev/sdd
to do so. Both menu entries and the .desktop file point to gparted_shell which is
a custom wrapper within Puppy. That in turn points at gparted which itself is a wrapper
that then calls the binary. (gpartedbin)
Launching gparted would circumvent the Puppy shell script with unpredictable results.
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]