Page 1 of 3
Sylpheed-3.4.1
Posted: Tue 07 Sep 2010, 04:09
by shinobar
UPDATE: 2014-04-15
Sylpheed compiled on 431JP2012 but may works on any Puppy-4.x/5.x.
Download
sylpheed-3.4.1-p4.sfs from
http://shino.pos.to/party/bridge.cgi?puppy/opt/
Code: Select all
./configure --prefix=/usr --host=i486-t2-linux-gnu --disable-updatecheck --enable-ldap
Compiled-in features: gthread IPv6 iconv OpenSSL LDAP GtkSpell
Holds all dependencies, but uses the libraries already installed on your Puppy if they are exist.
gnupg-2.0.22
gpgme-1.4.3
gtkspell-2.0.16
libasuan-2.1.1
libgcrypt-1.6.1
libgpg-error-1.12
libksba-1.3.0
openldap-2.4.39
pth-2.0.7
OLDER VERSIONS:
[list=1][*]sylpheed-3.3.0-p4.sfs
[*]sylpheed-3.1.2-1-w5.pet for all Puppy-5.x.
Required gtkspell and openldap packages as for Wary.
[*]sylpheed-3.1.2-w5.sfs for all Puppy-5.x exept lucid.
Caontains all dependencies.[/list]Download:
http://shino.pos.to/party/bridge.cgi?puppy/opt/pup5/
I made a package sylpheed-3.0.3-Lucid.pet, applicable on both Lupu and LupQ.
Get it from here.
Sylpheed
Posted: Wed 08 Sep 2010, 05:05
by rameshiyer
In Lucid Puppy , the LADP service is not available. Kindly confirm whether the LADP service is available in new version?.
Re: Sylpheed
Posted: Wed 08 Sep 2010, 13:19
by shinobar
rameshiyer wrote:In Lucid Puppy , the LADP service is not available. Kindly confirm whether the LADP service is available in new version?.
Sylpheed itself supports LADP, but on this build it is disabled.
EDIT on 11 Oct 2011:
Sylpheed-3.1.2 package supports LDAP.
(You need gtkspell and openldap package as for Wary.)
Posted: Wed 08 Sep 2010, 13:49
by rcrsn51
Does this build include support for gtkspell?
[Edit] I checked myself. It does.
Posted: Mon 14 Mar 2011, 16:39
by bleriot
Will it work on Wary 5.1.1? I would try myself, but I'd prefer not to deinstall the 2.7 version (and mailboxes) before being sure...
Thanks!
Sylpheed-3.1.2
Posted: Wed 12 Oct 2011, 14:38
by shinobar
UPDATE: Sylpheed-3.1.2, the most recent stable, for Puppy-5.x.
Sylpheed-3.3.0
Posted: Fri 31 May 2013, 20:37
by shinobar
UPDATE: Sylpheed-3.3.0 in SFS for Puppy-4.x/5.x.
Re: Sylpheed-3.3.0
Posted: Sun 02 Jun 2013, 00:33
by sheldonisaac
Thank you, shinobar.
May I please ask for some help?
The .sfs is in the list to be loaded when the Lucid Puppy 5.28-005 is booted.
However, the Sylpheed which is in the .jwmrc is still the 3.20 version from a .pet, and is /usr/bin/sylpheed
Where is the sylpheed executable of version 3.3.0?
Re: Sylpheed SFS and PET
Posted: Sun 02 Jun 2013, 02:44
by shinobar
sheldonisaac wrote:The .sfs is in the list to be loaded when the Lucid Puppy 5.28-005 is booted.
However, the Sylpheed which is in the .jwmrc is still the 3.20 version from a .pet, and is /usr/bin/sylpheed
Unload the SFS. Uninstall the PET. And then load the SFS. You can use the sfs_load.
The PETs are stronger than the SFSes.
Anyway in general speaking, you are better to remove older versions BEFORE installing the new version.
Sylpheed-3.4.1
Posted: Tue 15 Apr 2014, 12:44
by shinobar
UPDATE:
sylpheed-3.4.1-p4.sfs for Puppies both 4.x and 5.x.
http://shino.pos.to/party/bridge.cgi?puppy/opt/
Provides SFS only.
help Re: Sylpheed-3.4.1
Posted: Sun 27 Apr 2014, 21:34
by sheldonisaac
Thank you, shinobar.
When it starts, there's a message about GNUpg not found.
When I delete a message, Sylpheed closes.
Under Lucid Puppy 5.2.8.6.
UPDATE: Since reading watchdog's message, below, I tried it under Carolite 1.2, and it's OK.
So: what can be done to make it work under Lucid Puppy 5.2.8.6 ?
Posted: Mon 28 Apr 2014, 05:27
by watchdog
Tested Sylpheed-3.4.1-p4.sfs in puppy 4.3.2, wary 5.3 and lucid 5.28_005. Working well in puppy 4.3.2 and wary 5.3. I had trouble in lucid: the sfs does not correctly load with sfs-load 1.9.6. Upgrading sfs-load and removing the built-in sylpheed 3.1.3 I solved the problem. But sylpheed doesn't pop up on new messages arrival as in puppy 4.3.2 and wary 5.3.
Sylpheed Language
Posted: Tue 29 Apr 2014, 05:00
by TIW
Hi Shinobar.
I am using Sylpheed 3.4.1-p4.sfs and would like to change the displayed language from German to English. How do I do this ?
Thank you for your help.
Re: help Re: Sylpheed-3.4.1
Posted: Tue 29 Apr 2014, 06:54
by watchdog
sheldonisaac wrote:
So: what can be done to make it work under Lucid Puppy 5.2.8.6 ?
I am still on lucid 5.28_005. Try this:
-remove built-in sylpheed (Menu-Setup);
-install sfs_load-2.0-2.pet:
http://www.murga-linux.com/puppy/viewtopic.php?t=64354
-load sylpheed-3.4.1-p4.sfs.
Re: Sylpheed Language
Posted: Tue 29 Apr 2014, 07:20
by watchdog
TIW wrote:Hi Shinobar.
I am using Sylpheed 3.4.1-p4.sfs and would like to change the displayed language from German to English. How do I do this ?
Thank you for your help.
I think sylpheed uses the language setting in /etc/.profile. Try using a bash script to launch sylpheed:
Code: Select all
#!/bin/sh
export LC_ALL=C
sylpheed
Re: help Re: Sylpheed-3.4.1
Posted: Tue 29 Apr 2014, 12:14
by sheldonisaac
watchdog wrote:sheldonisaac wrote:
So: what can be done to make it work under Lucid Puppy 5.2.8.6 ?
I am still on lucid 5.28_005. Try this:
-remove built-in sylpheed (Menu-Setup);
-install sfs_load-2.0-2.pet:
http://www.murga-linux.com/puppy/viewtopic.php?t=64354
-load sylpheed-3.4.1-p4.sfs.
Thank you, watchdog. Sorry, I wasn't sufficiently explicit.
The Sylpheed 3.4.1 does work.
The problem I have under Lucid 5.2.8.6 are only the program's exiting when I right-click an email message and then choose delete.
Perhaps the developers of the LuPu 5.2.8.6 somehow omitted a library? Or ????
Thank you,
Sheldon
PS: I will boot Lucid 5.28_005 and try your advice.
Re: help Re: Sylpheed-3.4.1
Posted: Tue 29 Apr 2014, 12:27
by watchdog
sheldonisaac wrote:
The Sylpheed 3.4.1 does work.
The problem I have under Lucid 5.2.8.6 are only the program's exiting when I right-click an email message and then choose delete.
Have you read any error or warning if you launch sylpheed in console and delete a message? In my lupu 528_005 all works fine but sylpheed does not pop up on new messages arrival as in wary.
Re: help Re: Sylpheed-3.4.1
Posted: Tue 29 Apr 2014, 12:54
by sheldonisaac
watchdog wrote:sheldonisaac wrote:
The Sylpheed 3.4.1 does work.
The problem I have under Lucid 5.2.8.6 are only the program's exiting when I right-click an email message and then choose delete.
Have you read any error or warning if you launch sylpheed in console and delete a message? In my lupu 528_005 all works fine but sylpheed does not pop up on new messages arrival as in wary.
sh-4.1# /initrd/pup_ro4/usr/bin/sylpheed
(sylpheed:31820): Sylpheed-WARNING **: plugin.c:199: signal 'messageview-show' not found
/initrd/pup_ro4/usr/bin/sylpheed: symbol lookup error: /initrd/pup_ro4/usr/bin/sylpheed: undefined symbol: folder_item_is_trash
sh-4.1#
Re: help Re: Sylpheed-3.4.1
Posted: Tue 29 Apr 2014, 13:04
by watchdog
sheldonisaac wrote:
sh-4.1# /initrd/pup_ro4/usr/bin/sylpheed
(sylpheed:31820): Sylpheed-WARNING **: plugin.c:199: signal 'messageview-show' not found
/initrd/pup_ro4/usr/bin/sylpheed: symbol lookup error: /initrd/pup_ro4/usr/bin/sylpheed: undefined symbol: folder_item_is_trash
sh-4.1#
It seems like your libraries are not compatible. Perhaps it's problem of lupu 528_006.
EDIT: I had in lupu 528_005 a jwm upgrade version 657 compiled by me. I have now installed the official stable jwm2-755-w5c.pet and shino's sylpheed now correctly pop up on new messages arrival. In wary and puppy I already upgraded jwm. I think your problem could be jwm-related. Install the latest stable version:
http://www.murga-linux.com/puppy/viewtopic.php?t=83949
Sylpheed send mails
Posted: Mon 14 Jul 2014, 18:35
by Papy
Sylpheed well list all my mails received.
But if send a message, waiting is too long and i got the error message 'time expired'
I think that my settings are wrong, but perhaps no.
How long is a 'normal' time' for sending mails ?
I first try Claws : it was exactly the same.
Thks for help.