There are several things to try.Arefacti wrote:now, my wifi lexmark s305 works fine ! is anybody know if the scanner can works to ?
But I would like you to start a new topic and ask again. Make the title "Lexmark S-Series Scanner Drivers".
Nope....printer is not close enough to copmputer to use usbrcrsn51 wrote:Did you try a USB connection?
NopeDo you have the Puppy Firewall installed?
No results from that command.Type this commandCode: Select all
mpscan -p 9100 192.168.1.5
I understand....that's how I tried to set mine up...so there is obviously something I am no doing correctly, since the printer works in WIndows.[Edit] I set up my P1102w in XP as a wifi device. But no CUPS I tried was able to auto-detect it. So I manually installed it using AppSocket/HPJetDirect and foo2xxx. It worked fine.
Port 9100 is what your printer uses to talk with Linux machines. So if it doesn't respond, there's a problem.tlchost wrote:No results from that command.Type this commandCode: Select all
mpscan -p 9100 192.168.1.5
Printer now prints...AFTER I rebooted into windows, deleted the printer and then added it. Now has an address of 192.168.1.6rcrsn51 wrote: When I installed my unit, there was no option for giving the printer a static IP address. Which means that your printer may no longer be 192.168.1.5.
Start your web browser and go to that address. Is it still your printer?
No luck with my Brother HL-1430 and Gutenprint.rcrsn51 wrote: The printing system in Slacko is stable. Using slacko-5.4-firefox-4g, I installed my Brother HL-2070N as a Gutenprint HL-1430. It worked fine.
As a test, please do the following:
1. Boot off your Slacko Live CD. At the short initial pause, type the boot option "puppy pfix=ram".
2. Install your printer using the Gutenprint driver.
3. Using an application like Abiword, print a test page.
Did you try the driver from here? It is built from official Brother packages.mories wrote:No luck with my Brother HL-1430 and Gutenprint..
Is there some reason that you need to use the Gutenprint driver? There have been cases where Gutenprint broke their drivers for old models.The Brother's driver and Foomatic-rip generate these commands, but not Gutenprint.
Yes, the official Brother driver working properly.Did you try the driver from here? It is built from official Brother packages.
I have no particular reason to use the Gutenprint driver, simply because it's what comes in the various Puppies out-the-box.Is there some reason that you need to use the Gutenprint driver?
The test page from the control panel prints correctly.I wonder if you have got the printer set in some alternate mode. Print a self-test page from its control panel. Or do a printer reset to factory settings.
What happens with older Puppies?mories wrote:In all current puppys (Precise 5.4, Slacko 5.4, Fatdog 610) I have the same problem with the Gutenprint driver.
I'm curious, how did you figure this out?The printer seems to need previous commands in JCL / PJL.
<ESC>%-12345X@PJL ENTER LANGUAGE = PCL
What happens with older Puppies?
Yes, the same results.Did you try a factory reset?
Running the filters by hand, as indicated inI'm curious, how did you figure this out?
The printer seems to need previous commands in JCL / PJL.
%-12345X@PJL ENTER LANGUAGE = PCL
Code: Select all
export PPD=/etc/cups/ppd/foomatic.ppd
/usr/lib/cups/filter/bannertops 1 root '' 1 '' </usr/share/cups/data/testprint >bannertops.ps
/usr/lib/cups/filter/pstops 1 root '' 1 '' <bannertops.ps >pstops.ps
/usr/lib/cups/filter/footmatic-rip 1 root '' 1 '' <pstops.ps >out.prn
Code: Select all
%-12345X@PJL
@PJL JOB NAME="Ghost"
@PJL SET ECONOMODE=OFF
@PJL SET MEDIATYPE=REGULAR
@PJL SET SOURCETRAY=AUTO
@PJL SET RESOLUTION=300
@PJL SET RAS1200MODE=OFF
@PJL ENTER LANGUAGE=PCL
.... the PCL stream
Code: Select all
export PPD=/etc/cups/ppd/brother.ppd
/usr/lib/cups/filter/bannertops 1 root '' 1 '' </usr/share/cups/data/testprint >bannertops.ps
/usr/lib/cups/filter/pstops 1 root '' 1 '' <bannertops.ps >pstops.ps
/usr/lib/cups/filter/brlpdwrapperHL1430 1 root '' 1 '' <pstops.ps >out.prn
Code: Select all
%-12345X@PJL
@PJL JOB NAME="Brother HL-XXX"
@PJL SET RAS1200MODE = OFF
@PJL SET RESOLUTION = 600
@PJL SET ECONOMODE = OFF
@PJL SET SOURCETRAY = TRAY1
@PJL SET MEDIATYPE = REGULAR
@PJL SET ORIENTATION = PORTRAIT
@PJL SET PAPER = A4
@PJL SET PAGEPROTECT = AUTO
@PJL ENTER LANGUAGE = PCL
.... the PCL stream
Code: Select all
export PPD=/etc/cups/ppd/gutenprint.ppd
/usr/lib/cups/filter/bannertops 1 root '' 1 '' </usr/share/cups/data/testprint >bannertops.ps
/usr/lib/cups/filter/pstops 1 root '' 1 '' <bannertops.ps >pstops.ps
/usr/lib/cups/filter/pstoraster 1 root '' 1 '' <pstops.ps >pstoras.ras
/usr/lib/cups/filter/rastertogutenprint.5.2 1 root '' 1 '' <pstoras.ras >out.prn
Code: Select all
Only the PCL stream
Code: Select all
%-12345X@PJL
@PJL SET REPRINT=JOB
@PJL SET HOLD=OFF
@PJL JOB NAME="Gmail: xxxxxxxx"
@PJL PRINTLOG ITEM = 1,PRINTER
@PJL PRINTLOG ITEM = 2,Mon,10 Dec 2012 16:29:34
@PJL PRINTLOG ITEM = 3,xxxxxxx
@PJL PRINTLOG ITEM = 4,HPI3-PC
@PJL SET MEDIATYPE=REGULAR
@PJL SET ECONOMODE=OFF
@PJL SET RESOLUTION=600
@PJL ENTER LANGUAGE=PCL
.... the PCL stream
Thanks rcrsn51, I'll have a look at that but what you say doesn't address the question of why the combination of what I have isn't working. Are there problems with hplip-slacko-5.3.3.pet?rcrsn51 wrote:Have you read Page 1 of this thread? A much smaller and simpler driver to try would be the hplip_print-3.12.10a.pet.LeithR1 wrote:downloaded a copy of HPLIP-slacko-5.3.3.pet,