salut,
j'ai suivi la doc indiqué et j'ai vu qu'il fallait blakliste deux modules avant installer wl c'est ce que j'ai fais, mais wl.ko est introuvable sur le disque apres l'insatll du .pet indiqué.
peut etre parce ce que je suis en noyau 2.30
ci joint les fichiers demandés:
lspci -v:
00:00.0 Class 0600: 8086:27ac (rev 03)
Subsystem: 1025:019c
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] #09 [7109]
00:02.0 Class 0300: 8086:27ae (rev 03)
Subsystem: 1025:019c
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at 56280000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 50f0
Memory at 40000000 (32-bit, prefetchable) [size=256M]
Memory at 56300000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [d0] Power Management version 2
00:02.1 Class 0380: 8086:27a6 (rev 03)
Subsystem: 1025:019c
Flags: bus master, fast devsel, latency 0
Memory at 56200000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
00:1b.0 Class 0403: 8086:27d8 (rev 02)
Subsystem: 1025:019c
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at 56340000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [70] #10 [0091]
00:1c.0 Class 0604: 8086:27d0 (rev 02)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 55100000-561fffff
Prefetchable memory behind bridge: 0000000050000000-0000000050f00000
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1c.1 Class 0604: 8086:27d2 (rev 02)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 54100000-550fffff
Prefetchable memory behind bridge: 0000000051000000-0000000051f00000
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1c.2 Class 0604: 8086:27d4 (rev 02)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00002fff
Memory behind bridge: 53000000-540fffff
Prefetchable memory behind bridge: 0000000052000000-0000000052f00000
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1d.0 Class 0c03: 8086:27c8 (rev 02)
Subsystem: 1025:019c
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 50a0
00:1d.1 Class 0c03: 8086:27c9 (rev 02)
Subsystem: 1025:019c
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 5080
00:1d.2 Class 0c03: 8086:27ca (rev 02)
Subsystem: 1025:019c
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 5060
00:1d.3 Class 0c03: 8086:27cb (rev 02)
Subsystem: 1025:019c
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 5040
00:1d.7 Class 0c03: 8086:27cc (rev 02) (prog-if 20)
Subsystem: 1025:019c
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at 56344400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]
00:1e.0 Class 0604: 8086:2448 (rev e2) (prog-if 01)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Capabilities: [50] #0d [0000]
00:1f.0 Class 0601: 8086:27b9 (rev 02)
Subsystem: 1025:019c
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] #09 [100c]
00:1f.1 Class 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: 1025:019c
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 01f0
I/O ports at 03f4
I/O ports at 0170
I/O ports at 0374
I/O ports at 50c0
00:1f.2 Class 0106: 8086:27c5 (rev 02) (prog-if 01)
Subsystem: 1025:019c
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 27
I/O ports at 50d8
I/O ports at 50fc
I/O ports at 50d0 [size=8]
I/O ports at 50f8 [size=4]
I/O ports at 5020 [size=16]
Memory at 56344000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [70] Power Management version 2
00:1f.3 Class 0c05: 8086:27da (rev 02)
Subsystem: 1025:019c
Flags: medium devsel, IRQ 17
I/O ports at 5000 [size=32]
01:00.0 Class 0280: 14e4:4315 (rev 01)
Subsystem: 105b:e018
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at 55100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [58] #09 [0078]
Capabilities: [e8] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [d0] #10 [0001]
03:00.0 Class 0200: 1969:1026 (rev b0)
Subsystem: 1025:019c
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at 53000000 (64-bit, non-prefetchable) [size=256K]
I/O ports at 1000 [size=128]
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [58] #10 [0001]
-------------------------------------------------------------------------
et lspci -vv
00:00.0 Class 0600: 8086:27ac (rev 03)
Subsystem: 1025:019c
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] #09 [7109]
00:02.0 Class 0300: 8086:27ae (rev 03)
Subsystem: 1025:019c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 56280000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 50f0 [size=8]
Region 2: Memory at 40000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at 56300000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 Class 0380: 8086:27a6 (rev 03)
Subsystem: 1025:019c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at 56200000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1b.0 Class 0403: 8086:27d8 (rev 02)
Subsystem: 1025:019c
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 56340000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] #10 [0091]
00:1c.0 Class 0604: 8086:27d0 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 55100000-561fffff
Prefetchable memory behind bridge: 0000000050000000-0000000050f00000
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Address: fee0300c Data: 4161
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.1 Class 0604: 8086:27d2 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 54100000-550fffff
Prefetchable memory behind bridge: 0000000051000000-0000000051f00000
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Address: fee0300c Data: 4169
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.2 Class 0604: 8086:27d4 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00002fff
Memory behind bridge: 53000000-540fffff
Prefetchable memory behind bridge: 0000000052000000-0000000052f00000
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Address: fee0300c Data: 4171
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 Class 0c03: 8086:27c8 (rev 02)
Subsystem: 1025:019c
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 50a0 [size=32]
00:1d.1 Class 0c03: 8086:27c9 (rev 02)
Subsystem: 1025:019c
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 5080 [size=32]
00:1d.2 Class 0c03: 8086:27ca (rev 02)
Subsystem: 1025:019c
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 5060 [size=32]
00:1d.3 Class 0c03: 8086:27cb (rev 02)
Subsystem: 1025:019c
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 5040 [size=32]
00:1d.7 Class 0c03: 8086:27cc (rev 02) (prog-if 20)
Subsystem: 1025:019c
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 56344400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [20a0]
00:1e.0 Class 0604: 8086:2448 (rev e2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] #0d [0000]
00:1f.0 Class 0601: 8086:27b9 (rev 02)
Subsystem: 1025:019c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [e0] #09 [100c]
00:1f.1 Class 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: 1025:019c
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 50c0 [size=16]
00:1f.2 Class 0106: 8086:27c5 (rev 02) (prog-if 01)
Subsystem: 1025:019c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at 50d8 [size=8]
Region 1: I/O ports at 50fc [size=4]
Region 2: I/O ports at 50d0 [size=8]
Region 3: I/O ports at 50f8 [size=4]
Region 4: I/O ports at 5020 [size=16]
Region 5: Memory at 56344000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Address: fee0300c Data: 4179
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.3 Class 0c05: 8086:27da (rev 02)
Subsystem: 1025:019c
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 5000 [size=32]
01:00.0 Class 0280: 14e4:4315 (rev 01)
Subsystem: 105b:e018
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 55100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] #09 [0078]
Capabilities: [e8] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [d0] #10 [0001]
03:00.0 Class 0200: 1969:1026 (rev b0)
Subsystem: 1025:019c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 53000000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 1000 [size=128]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 00000000fee0300c Data: 4189
Capabilities: [58] #10 [0001]
[RESOLU]Pb carte son sur aspireone et puppy4
j'ai trouvé ca sur le web concernant le driver wl
http://www.paperblog.fr/1546601/install ... -broadcom/
mais il faut compilé le module.
http://www.paperblog.fr/1546601/install ... -broadcom/
mais il faut compilé le module.
eh bien pb wifi résolu !!!
en fait c'etait assez simple mais il faut trouver la bonne info.
donc pour résumer il faut blacklister deux modules: b43 et ssb.
ensuite télécharger ce packtage : broadcom-5.10.91.9.3-k2.6.30.5.pet
sur ce fil de discussion : http://www.murga-linux.com/puppy/viewtopic.php?t=47267
ensuite install et parametrage par network wizard et c'est tout
(ca pour une carte wifi broadcom 4310 intégré au portable acer aspire one D150)
merci pupux pour t'on aide
bye.
en fait c'etait assez simple mais il faut trouver la bonne info.
donc pour résumer il faut blacklister deux modules: b43 et ssb.
ensuite télécharger ce packtage : broadcom-5.10.91.9.3-k2.6.30.5.pet
sur ce fil de discussion : http://www.murga-linux.com/puppy/viewtopic.php?t=47267
ensuite install et parametrage par network wizard et c'est tout
(ca pour une carte wifi broadcom 4310 intégré au portable acer aspire one D150)
merci pupux pour t'on aide
bye.