Puppy 4.3 Beta2 -- bugs and reports
-
- Posts: 7
- Joined: Mon 17 Sep 2007, 23:50
- Location: Fort Walton Beach, Florida
alsaconf 1.0.16 fails
BarryK,
I've tried this from console and as part of the setup, on several various computers, and no sound card is ever detected by the script. The sound cards all have been detected at boot and are usable by running the alsamixer from the speaker icon or console. This seems to be something new since changing the alsa version to the newer one.
Have run this beta on a variety of older P3 & P4 computers and have not run into any other setup issues, using a manual frugal installation to HD.
Rich
I've tried this from console and as part of the setup, on several various computers, and no sound card is ever detected by the script. The sound cards all have been detected at boot and are usable by running the alsamixer from the speaker icon or console. This seems to be something new since changing the alsa version to the newer one.
Have run this beta on a variety of older P3 & P4 computers and have not run into any other setup issues, using a manual frugal installation to HD.
Rich
-
- Posts: 632
- Joined: Tue 02 Oct 2007, 07:39
@BarryK: Looks like happypuppy found a way to reproduce the JWM theme changing bug. See the post in the dev blog.
I always edit the .jwmrc-tray file first to remove unnecessary stuff.
For example, I don't need asapm (i don't use a laptop), xload (I don't need it) ,the pager (i don't use virtual desktops) and the show desktop icon ,so I edit .jwmrc-tray and remove the stuff.
Then when I use the GUI to change the theme, the taskbar disappears
As happypuppy said in the blog post, this worked perfectly in Puppy 4.1.2.
I always edit the .jwmrc-tray file first to remove unnecessary stuff.
For example, I don't need asapm (i don't use a laptop), xload (I don't need it) ,the pager (i don't use virtual desktops) and the show desktop icon ,so I edit .jwmrc-tray and remove the stuff.
Then when I use the GUI to change the theme, the taskbar disappears
As happypuppy said in the blog post, this worked perfectly in Puppy 4.1.2.
Last edited by panzerpuppy on Wed 09 Sep 2009, 16:33, edited 1 time in total.
Is the ath9k driver module for the newer "n" wifi devices included?
Also, for my Puppy-newbie friend - is there a driver for the Buffalo wli-u2-g300n?
Or does he have to do the ndiswrapper thing?
Also, for my Puppy-newbie friend - is there a driver for the Buffalo wli-u2-g300n?
Or does he have to do the ndiswrapper thing?
Last edited by edoc on Wed 09 Sep 2009, 16:48, edited 1 time in total.
-
- Posts: 632
- Joined: Tue 02 Oct 2007, 07:39
More bugs:
- In PupX (set properties of X) , unchecking the 'enable screen saver' checkbox has no effect. The screensaver still kicks in after a while.
- Some apps behave strangely when locale is set to anything but en_US:
i.e. ExpenseTracker refuses to save expenses.
- Nathan Wallpaper Setter doesn't work (EDIT: fixed with the .PET patch)
P.S. 'Top' (the process viewer) looks much better / easier on the eyes with a white background.
It's a simple fix: just edit /usr/share/applications/Top-view-running-processes.desktop and change the bg color from #c0c0c0 to #ffffff
------------------
panzerpuppy
- In PupX (set properties of X) , unchecking the 'enable screen saver' checkbox has no effect. The screensaver still kicks in after a while.
- Some apps behave strangely when locale is set to anything but en_US:
i.e. ExpenseTracker refuses to save expenses.
- Nathan Wallpaper Setter doesn't work (EDIT: fixed with the .PET patch)
P.S. 'Top' (the process viewer) looks much better / easier on the eyes with a white background.
It's a simple fix: just edit /usr/share/applications/Top-view-running-processes.desktop and change the bg color from #c0c0c0 to #ffffff
------------------
panzerpuppy
Last edited by panzerpuppy on Wed 09 Sep 2009, 18:58, edited 7 times in total.
panzerpuppy:
Any change to .jwmrc is NOT permanent, you need to edit the /usr/share/applications/Top-view-running-processes.desktop and then run fixmenus in terminal and Restart JWM.'Top' (the process viewer) looks much better / easier on the eyes with a white background.
It's a simple fix: just change the bg color from #c0c0c0 to #ffffff in .jwmrc
Save
Reburned live CD using both Puppy 4.2.1 and Windows9 (sorry). Windows burn failed to save but was good otherwise. Pburn saved, but had to retry several times befor it would load due to syncing glitch. Burniso2CDgave best results, but neither would save my wireless connection (the ever problematic rtl8187b. Otherwise , even SCIM is working. Thanks for a great easy to use OS
stray
stray
He got the Buffalo wli-u2-g300n working via ndiswrapper and the MS-win drivers from the Buffalo site.
Would be better to have a Linux-native driver but please add the Buffalo to the list of ndiswrapper supported devices - if it is not already on that list.
Would be better to have a Linux-native driver but please add the Buffalo to the list of ndiswrapper supported devices - if it is not already on that list.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
-
- Posts: 632
- Joined: Tue 02 Oct 2007, 07:39
4.3Beta2 (Sata)
Does not include ActiveX version 10 under SeaMonkey 1.1.7.
How to update? What version of Linux is Puppy based on?
Under Qemu when Puppy 4.3.2 is shutdown rather then closing task returning to originating batch file as it does under 4.2.1 it displays a message "shutdown" then the screen glows blank. Manually keying in Ctrl/Alt/F followed by closing open task windows returns you to where you should be.
4.3Beta2 SCSI
On SCSI machine audio chip cs4236 not handled correctly. ALSA
freezes at cs4326 and never returns.
On SCSI machine can not use Universal Installer. Says not supported.
Desired setup sda Windows XP, sdb1 Puppy, sdb2 Swap, sdb3 FAT32.
Grub on sda with boot menu for Puppy and Windows.
Note: Booting LIVE the SCSI devices are revealed.
-Ken
Does not include ActiveX version 10 under SeaMonkey 1.1.7.
How to update? What version of Linux is Puppy based on?
Under Qemu when Puppy 4.3.2 is shutdown rather then closing task returning to originating batch file as it does under 4.2.1 it displays a message "shutdown" then the screen glows blank. Manually keying in Ctrl/Alt/F followed by closing open task windows returns you to where you should be.
4.3Beta2 SCSI
On SCSI machine audio chip cs4236 not handled correctly. ALSA
freezes at cs4326 and never returns.
On SCSI machine can not use Universal Installer. Says not supported.
Desired setup sda Windows XP, sdb1 Puppy, sdb2 Swap, sdb3 FAT32.
Grub on sda with boot menu for Puppy and Windows.
Note: Booting LIVE the SCSI devices are revealed.
-Ken
PstreamTV Good
Works great. But best with Mplayer installed.
Rgds Mike
Rgds Mike
Mplayer installed for use with PstreamTV
The JWM menu needs fixing for Mplayer as per:
http://www.murga-linux.com/puppy/viewtopic.php?t=26511
Otherwise everything freezes.
Rgds Mike
Sorry I know this is off topic but Mplayer is needed for PStreamTV which is part of this release.
http://www.murga-linux.com/puppy/viewtopic.php?t=26511
Otherwise everything freezes.
Rgds Mike
Sorry I know this is off topic but Mplayer is needed for PStreamTV which is part of this release.
pupscan shows all driver modules as "unknown"
Now that the modules.*map files are no longer maintained in /lib/modules/<kernel>/, pupscan no longer displays the modules associated with hardware devices. I have updated it to obtain its information from the modules.alias file and added use of the dialup-modem rules file (for devices not listed in modules.alias).
I also changed it to choose that last-found module instead of the first, to match how pup_event_backend_modprobe makes its choice.
At some point, I hope to refine it so that it accounts for "pci overrides" and "preferred modules" specified in the BootManager. But this is already a little more comprehensive than when it was last working.
UPDATE 9/10/09: Turns out using the modaliases is trickier than I anticipated. I have made further refinements to pupscan (as -2), but more can be done. I may continue refinement, but please (Barry) take whatever version is here at the deadline for the next beta. Thanks,
Richard
I also changed it to choose that last-found module instead of the first, to match how pup_event_backend_modprobe makes its choice.
At some point, I hope to refine it so that it accounts for "pci overrides" and "preferred modules" specified in the BootManager. But this is already a little more comprehensive than when it was last working.
UPDATE 9/10/09: Turns out using the modaliases is trickier than I anticipated. I have made further refinements to pupscan (as -2), but more can be done. I may continue refinement, but please (Barry) take whatever version is here at the deadline for the next beta. Thanks,
Richard
- Attachments
-
- pupscan_using_modalias-2.pet
- The upgraded pupscan.
- (3.44 KiB) Downloaded 410 times
-
- pupscan_differences.tar.gz
- Difference listing
- (726 Bytes) Downloaded 374 times
Last edited by rerwin on Thu 10 Sep 2009, 22:09, edited 1 time in total.
sound card not identified
puppy version 4.12 recognizes hda-intel 8086:27d8(rev 01)
4.3 b2 does recognize card, so no audio
4.3 b2 does recognize card, so no audio
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi,
on pup4.3beta2 frugall
I installed
xorg_xorg_full_dri-7.3.pet
to get OpenGL and subsequently instal, let us say ....MU's GoogleEarth sfs file.
To see if OpenGL was running I did this:
on pup4.3b2 + xorg.xorg-7.3-full-dri.pet
then no working OpenGL using that pet.
Cheers
Charlie
on pup4.3beta2 frugall
I installed
xorg_xorg_full_dri-7.3.pet
to get OpenGL and subsequently instal, let us say ....MU's GoogleEarth sfs file.
To see if OpenGL was running I did this:
on pup4.3b2 + xorg.xorg-7.3-full-dri.pet
Code: Select all
# glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
Cheers
Charlie
iwlwifi-4965-2.ucode
My wifi network misses the firmware. I have found that, when included in
/lib/firmware, the wireless network works properly. I include the firmware attached here.
It needs to be unzipped before copied to /lib/firmware directory.
I hope that it can be included in puppy 4.3.
/lib/firmware, the wireless network works properly. I include the firmware attached here.
It needs to be unzipped before copied to /lib/firmware directory.
I hope that it can be included in puppy 4.3.
- Attachments
-
- iwlwifi-4965-2.ucode.gz
- (76.44 KiB) Downloaded 405 times
I have the same exact problem and it is present in both beta1 and beta2.Sylvander wrote:On my PC it won't auto power-off [does on BoxPup & Puppy 4.2.1-rc3], so it's necessary for me to manually use the off switch once it reports that the system has halted.
I have on older pentium3.
It goes through the shut down and ends in white text on the screen saying "system halted" and I then push the power button once to turn it off.
[u]Netbook[/u]; Compaq cq10 with Quirky008,Ubuntu 9.10,W7 :oops: