Jaunty Puppy Alpha9 feedback

Under development: PCMCIA, wireless, etc.
Message
Author
salvarez01
Posts: 1
Joined: Tue 02 Jun 2009, 06:02

WIFI CHANNELS 12, 13 and 14

#61 Post by salvarez01 »

Hello,

I'm trying to use wifi in channels 12, 13 and 14, but only channels 1-11 are OK,

I have tried to change regulatory domain with:
iw reg set ES

(I have installed iw)

but upup return file error or missing file

Any idea?


Thanks

User avatar
dogone
Posts: 202
Joined: Tue 22 Apr 2008, 02:53
Location: Arizona, USA

Puppy Package Manager does not list manually installed pets

#62 Post by dogone »

The PPM that comes with upup476 does not list pet packages I install via ROX. It will even offer to install those same packages again from a repo. All the correct entries for manually installed pets are found in /root/.packages and I must manually remove them using the that information.

User avatar
rerwin
Posts: 2017
Joined: Wed 24 Aug 2005, 22:50
Location: Maine, USA

Wireless modem updates

#63 Post by rerwin »

Barry,
UPDATE: Please ignore this posting. It is replaced by a later submission, posted here: http://www.murga-linux.com/puppy/viewto ... 303#318303
I have removed the obsolete attachment.
Attached is a tarball with Wireless Modem updates. In addition, P5 needs the entire dotpet: hso-udev-2008-09.pet from here:http://www.murga-linux.com/puppy/viewto ... 979#266979
It contains the mode-switching tools for the High-speed Option (hso) modems.

Please wait as long as you can before taking the tarball, in case I need to update it with more progress. I will bump the (-1) suffix whenever I re-upload it to here. This contains some debug logic that I hope to remove before P5 goes final.
Richard
Last edited by rerwin on Mon 22 Jun 2009, 23:24, edited 1 time in total.

User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

Re: Fails To Work, Funky Lines.

#64 Post by Béèm »

david_halliday wrote:Last night I tried Alpha9 on my Webpad (DT Research 366) and it failed. Here is what happened:

If I just hook up USB CDROM and boot. It starts fine and proceeds down the bootup order outputting the usual [OK]'s but when it switches to X (using Xorg) I just a set of bands and lines. Reminiscent of when you would overdrive an old CRT.

To my surprise I get the same problem booting to nox

When I tried setting the res to 800x600 to match the screen via vga= The screen went black (before the normal [OK]'s) and never came back.

It is not a general problem with Puppy as 4.2.1 comes up fine (I still need to add touch screen support).

A little info on the webpad may help debug. It has 256M memory 512M flash drive, 800x600 LCD screen driven by NSC chip CPU is a 400Mhz AMD Geode.

Dave.
I, the 5 seconds pause try entering puppy vga=normal
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]

david_halliday
Posts: 2
Joined: Mon 01 Jun 2009, 05:54

#65 Post by david_halliday »

Unfortunately vga=normal did not help. (same effect as no vga=xxx) that is the screen that describes the boot prosses prints the dones's but it never gets beyond that even with pfix=nox

Attached are some pictures.

If I boot with:

puppy vga=normal pfix=nox

Image

Boot progresses OK

Image

Bad video with odd lines even with nox set.

Image

Its interesting to note Puppy 4.2 boots OK. I have trouble with the touch screen but thats a topic for another thread.

Image

Thanks,

Dave.

aragon
Posts: 1698
Joined: Mon 15 Oct 2007, 12:18
Location: Germany

#66 Post by aragon »

hi barry,

some short points from my first quick view (with a recent duelcore desktop):
- everything runs impressive fast
- also have the mentioned probs with the missing menuicons
- it would be nice to include a setting-opt in ppm for a proxy-server. i know that i could setup the proxy in /etc/wgetrc but it would be more userfriendly if this would be possible in ppm.

in dw-weekly there's an article about debris-linux (http://distrowatch.com/weekly.php?issue=20090601). They are also using ubuntu as main-repo. the interesting part of the article is about their problems with the used repo.
...Unfortunately, Debris Linux 1.0.4 developed a rather serious problem in late April. Only a small repository of customized packages is maintained specifically for the distro. Otherwise Debris Linux depends on upstream Ubuntu repositories. Last month Ubuntu 7.10 reached end of supported life. If you go to update your package listing, you will get lots of 404 errors as the repositories are now gone...
...Unlike Debris Linux 1.0, which was based off the most recent Ubuntu release, moving forward Debris Linux will only use Ubuntu Long Term Support (LTS) releases as their base, which should prevent the problem of Canonical ending support before the next major release is ready...
as you're using the jaunty-repo, would this also be a problem if the jaunty-successor is launched and therefore the jaunty-repo is closed?

aragon

User avatar
tasmod
Posts: 1460
Joined: Thu 04 Dec 2008, 13:53
Location: North Lincolnshire. UK
Contact:

#67 Post by tasmod »

I've tried to get this running on my favourite PC (with large screen)

However it uses a Logitech wireless keyboard which does not work. It would appear that support is not in the kernel?

This is a section from dmesg in 421 :-

Code: Select all

input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input0
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1
Fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/input/input1
input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input2
input,hiddev97: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Now the message I can see during boot with high verbosity (can't capture?) shows as above for Optical Mouse but not the lines for the Logitech keyboard.

Is it possible I could compile the kernel and add support for usb wireless keyboard?
It would be a new one for me but I don't know where to start to add the device or am I on the wrong track?.
Rob
-
The moment after you press "Post" is the moment you actually see the typso 8)

ARAN
Posts: 113
Joined: Fri 21 Oct 2005, 12:47

#68 Post by ARAN »

Something is wrong with the mirrors of ibbilio.

I normally download releases of upup from the very fast ibblio mirror
http://ftp.nluug.nl/ftp/pub/os/Linux/di ... of-alpha9/

for some reason all builds of woof are broken since some days.

Compare only the size

http://ftp.nluug.nl/ftp/pub/os/Linux/di ... of-alpha9/
upup-476.iso 22-May-2009 17:25 95M

http://distro.ibiblio.org/pub/linux/dis ... of-alpha9/
upup-476.iso 22-May-2009 07:24 109M

Be carefull if you download things from ftp.nluug.nl.

I have needed more than 3 Hours before i realised that something with the mirror is wrong.

User avatar
tasmod
Posts: 1460
Joined: Thu 04 Dec 2008, 13:53
Location: North Lincolnshire. UK
Contact:

#69 Post by tasmod »

OK, no replies regarding wireless keyboard.

Anyone help here ?

I've since looked at initrd.gz and the kernel and there doesn't appear to be any difference in scripts there that would alter anything.

However in a working version then the rcsysinit has the 'usb mouse' routine edited out by Barry.

Not sure if that's relevant but the Logitech wireless also comes up as usb mouse in dmesg. As does an entry for usb hid wireless keyboard.

It seems that it's not recognised once kernel routine is looking for hardware. how do i rectify this?
Rob
-
The moment after you press "Post" is the moment you actually see the typso 8)

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#70 Post by 01micko »

I did a usb install on my main machine, all went well. I booted it on my new eee 701.. no problems so far.

Tried to connect wireless, no module loaded, ok will investigate later. Sound is at a constant low volume even after running alsa sound wizard. Connected fine over ethernet.

Browsing, flash is fine, Pwidgets works (hehe) but I might mod it a bit for small res... clock takes up quarter of the screen!

It flies compared to the stock Xandros it came with. And I hate that you can't have a wallpaper ootb in the stock OS.

Will test 3G modem later.

Cheers
Puppy Linux Blog - contact me for access

Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

#71 Post by Jim1911 »

Barry,

Just for information: Using upup's rox, I copied my frugal installation of upup476, which works great on an ext3 partition, to a psubdir on an ext4 partition. The bootup files searched for upup-476.sfs and failed to find it. I then copied it from the psubdir to the root of the ext4 partition and it still could not be found. So although ext4 partitions are recognized and can be read and written to with rox and files edited with Leafpad or Geany, there is still a problem with woof and ext4.

Jim

Peter444
Posts: 36
Joined: Tue 04 Sep 2007, 02:58
Location: Brisbane Queensland Australia

upup476.iso

#72 Post by Peter444 »

Downloaded upup476.iso and burnt to multisession live cd using turbopup alpha3

Downloaded lite gnome games pet by ttuuxxx and enjoyed some of the extra features not available in ubuntu gnome games

Successfully saved to multisession cd 4 sessions

Decided to remaster multisession livecd with extra games so i could run it in virtualbox with xp but could not get past insert livecd to read files, dialogue box stays frozen and requires a restart of x to remove, commands close or kill not successful

Any thoughts how to overcome problem?

Health, Wealth and Happiness for the future

User avatar
rhadon
Posts: 1292
Joined: Thu 27 Mar 2008, 11:05
Location: Germany

#73 Post by rhadon »

Hi,

I'm playing around with woof-alpha9.tar.gz.

Building a distro with 0setup etc. is quite easy :D . I also found out how to add .pets (pet2tgz and moving the files to the approbiate folders in rootfs-skeleton). After building the distro, I can run this programs from console or drag the .desktop file to the desktop for running them from there.

But how can I do this ( that the .desktop file appears on the desktop) before building the distro?

Help would be appreciated :D

Rolf
Last edited by rhadon on Wed 17 Jun 2009, 07:56, edited 1 time in total.
Ich verwende "frugal", und das ist gut so. :wink:
Raspberry Pi without Puppy? No, thanks.

User avatar
ttuuxxx
Posts: 11171
Joined: Sat 05 May 2007, 10:00
Location: Ontario Canada,Sydney Australia
Contact:

Re: Puppy on old rebuilt Dell 4100

#74 Post by ttuuxxx »

Schism wrote:Put Puppy 476.iso frugal on my rebuilt Dell 4100:
-Pentium II
-256 MB ram
-1024 x 768 display
-CD/DVD burner
-CD drve
-Floppy drive
-10 GB drive
-6 GB drive

Works as good as the other Puppies on it.

Thank You Barry, and everyone involved in puppy!

My main OS! XP for games only!

But why can't i load my OpenOffice.sfs's? I have 3.01 and 2.2.0?
The reason why is because series 5 has an updated sfs system, That no longer supports older version, I quickly took the unsquashfs file from 4 series and renamed it /root/Drop-older-sfs, so if you install the pet below, drag any sfs on-top of the "Drop-older-sfs" located in root, and it will extract into a folder located /root/squashfs-root
now rename the folder to say OpenOffice-2.2 and run
dir2pet /root/OpenOffice-2.2 and follow the steps and make a pet out of it, or make a new sfs out of it, If you make the sfs in 5 series it will work in 5 series. But pets work in any series since its not using the sfs system.

ttuuxxx
Attachments
Oldersfs.pet
(19.03 KiB) Downloaded 579 times
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)

User avatar
Schism
Posts: 78
Joined: Fri 12 Dec 2008, 15:50

Thank You!

#75 Post by Schism »

I have alot of space so i just run Puppy 4.2 open the squash file, put contents in folder.
Reboot into Woof (Alpha 9) and use the dir2sfs for the folder. Then I add in boot manager and restart Woof.

Works, I have:
-Netbeans_jdk-6.5.1_1.6u14_476.sfs
-Openoffice-2.2.0_476.sfs
-xampp-linux-1.7_476.sfs

They all work! Thank You for your time but i figured it out right after my post.

If we have a place to put these I'll give them.

User avatar
ttuuxxx
Posts: 11171
Joined: Sat 05 May 2007, 10:00
Location: Ontario Canada,Sydney Australia
Contact:

Re: Thank You!

#76 Post by ttuuxxx »

Schism wrote:I have alot of space so i just run Puppy 4.2 open the squash file, put contents in folder.
Reboot into Woof (Alpha 9) and use the dir2sfs for the folder. Then I add in boot manager and restart Woof.

Works, I have:
-Netbeans_jdk-6.5.1_1.6u14_476.sfs
-Openoffice-2.2.0_476.sfs
-xampp-linux-1.7_476.sfs

They all work! Thank You for your time but i figured it out right after my post.

If we have a place to put these I'll give them.
No problem :) just remember if you use the pet above, all you do is drag and drop the 3-4 series sfs on it and it expands into /root/squashfs-root and just rename it and make your new sfs, saves the need for 2 OS, and rebooting :)
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#77 Post by BarryK »

For you guys who have reported a non-functional wireless keyboard, would you mind doing these tests?:

http://puppylinux.com/blog/?viewDetailed=00820
[url]https://bkhome.org/news/[/url]

User avatar
rerwin
Posts: 2017
Joined: Wed 24 Aug 2005, 22:50
Location: Maine, USA

3G wireless and Intel modem support update

#78 Post by rerwin »

Barry,
Here, at last, is my modem contribution to the next release after alpha9. Because the Intel and 3G parts both use the updated modemtest script, they are merged into this combined package. It is a dotpet, so people can experiment before you integrate this into P5 (and wherever else it goes from there).

I have attempted to anticipate how you would annotate the history entries in some of the /usr/sbin files. Not knowing how you will identify the next release, I used "v477" to represent it, for my recent changes to them. The "v477"s will probably need to be changed.

Please notice the files I remove in the pinstall.sh file. Since the Intel support no longer uses /dev/536 and /dev/537, those files can be removed from Puppy. The new nodes appear automatically. Also note that I deleted some rules files that were named incorrectly. I have replaced them with correctly named (and updated) files.

For full support of the wireless modems, the following packages are required from: http://www.murga-linux.com/puppy/viewto ... 979#266979
usb_modeswitch-1.0.2.pet
hso-udev-2008-09.pet

They contain the mode-switching tools for both types of the Option modems. In hso-udev, the essential files are those in /usr/sbin and /etc. The other files appear to be part of advanced usage of the modems, which I have not investigated. But they are small.
Richard
Attachments
3G_pupdial_patch_to_P5-alpha9-2.pet
Combined 3G-wireless and Intel modem support upgrade
(29.33 KiB) Downloaded 1098 times

Peter444
Posts: 36
Joined: Tue 04 Sep 2007, 02:58
Location: Brisbane Queensland Australia

lite gnome games pet

#79 Post by Peter444 »

ttuuxxx, as the lite gnome games pet worked so well in u476 i thought i would try and install them in turbopup alpha 3 which i tend to use a lot

Unfortunatly i received the dreaded missing dependences message (attached)

Went to ubuntu 9.04 and searched for the missing dependences and copied them into turbopup alpha 3, still no joy looking for a bit of guidance

All menu entries are present

At least the exercise has made me work out how to take a screen shot with shot-.1.1.pet

)apologies, attachment doesnt want to show up, i will e/myou agian when i work it out)

Health, Wealth and Happiness for the future

Another 50mm of rain overnight, its like living in a swamp at the moment
Attachments
sreenshot.jpg
(75.78 KiB) Downloaded 3137 times

ARAN
Posts: 113
Joined: Fri 21 Oct 2005, 12:47

Java Development Kit

#80 Post by ARAN »

Does anybody know if the Java Development Kit is inbuild in devx ?

I wanted just to try compiling ANDROID for my Pocket PC with puppy linux but it requiere JDK 5.0 from SUN.

http://source.android.com/download

http://java.sun.com/javase/downloads/

Is it possible to have JDK in devx ?
It would be really gret.

Post Reply