Pburn problem burning an ISO

[exProphecy]

Hey guys, I've been trying to burn an ISO and it's giving me an error. Here's the log file:

###################################################
COMMAND:
###################################################
wodim -dao -v dev=/dev/sr0 -eject driveropts=burnfree ""

###################################################
OUTPUT:
###################################################
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identification : 'CD/DVDW TS-L532A'
Revision : 'TI51'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0008 (CD-ROM)
Profile: 0x0009 (CD-R) (current)
Profile: 0x000A (CD-RW)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1451664 = 1417 KB
FIFO size : 4194304 = 4096 KB
wodim: No such file or directory. Cannot open ''.

Any ideas? I am currently booting Puppy from a USB stick and I'm locating the temp storage in another USB hard drive. The ISO is also located on this second USB hard drive.

[pa_mcclamrock]

For some reason (unknown to me), Pburn is failing to put the name of the ISO in the command, and putting only "" instead. Sorry, I don't know how to solve the problem with Pburn, but (if I do say so myself) I know I can burn an ISO to a CD or DVD with WISH Disc-Writer (see http://www.murga-linux.com/puppy/viewto ... 367#298367). It shows you the name of the ISO in an entry line after you select the file, and gets the name from the same entry line to put it in the command.

[zigbert]

exProphecy
1. Are you using the latest Pburn - 2.3.0 ? If not - Please upgrade.
2. What is the full name of the iso (/dir/dir/name)?
3. How did you start the iso-burn. From menu or from burn-button?


Thanks for reporting
Sigmund