pupeee 4.2
It keeps failing to return normally. Most times, something's missing: wifi, wine, no shutdown.
I remember now that Tempestuous had warned of this, precisely b/c suspending to RAM is pretty tricky.
On the other hand, the eee readout of acpitool is interesting and thorough, so I'll keep it installed.
Jake
I remember now that Tempestuous had warned of this, precisely b/c suspending to RAM is pretty tricky.
On the other hand, the eee readout of acpitool is interesting and thorough, so I'll keep it installed.
Jake
wifi does not get IP
I was sooo excited to see pupeee 4.2 but alas wifi seems to only partialy work.
I have a eeePC 900 that came with XP installed. It all works but snail pace slow.
Pupeee is so much faster and now it can see the network but it won't pull an IP. I have M$ machines and a MacBook that work on my wireless just fine. I use WPA - Personal (WPA2?).
I put in the key and it just doesn't get an IP. Also it doesn't see my network in the "Puppy Network Wizard" but it does in pwireless.
I think this may be key. Maybe PNW can't deal with the WPA?
I have a eeePC 900 that came with XP installed. It all works but snail pace slow.
Pupeee is so much faster and now it can see the network but it won't pull an IP. I have M$ machines and a MacBook that work on my wireless just fine. I use WPA - Personal (WPA2?).
I put in the key and it just doesn't get an IP. Also it doesn't see my network in the "Puppy Network Wizard" but it does in pwireless.
I think this may be key. Maybe PNW can't deal with the WPA?
wifi on Pupeee
I tried it several times. Always the same result. It does not see my wireless network. It sees a couple of my neighbors networks though.
I have even tried moving to different rooms in the house. Same result.
Same machine running XP has no trouble connecting, just SLOW.
I have even tried moving to different rooms in the house. Same result.
Same machine running XP has no trouble connecting, just SLOW.
eeepc 1000he wifi driver
Please, where?
luther349 wrote:
for the 1000he owner they use a newer wifi chipset. if you look in the forum link i have with the pets i used someone has posted a driver for that model eeepc.
wifi on Pupeee
Yeah, not gonna change my network security to something less secure. Just won't use Pupeee, unfortunately.
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
Obviously I too am not going to use a less secure encryption.
Great to see 4.2 working if not connecting on the Eeeepc
I use wpa2 for wireless and eeetiger worked with wpa2 - as yet Pupeee 4.2 does not. Not sure if Dinky is available to advise . . .
http://tmxxine.com/wik/wikka.php?wakka=TigerPup
Great to see 4.2 working if not connecting on the Eeeepc
I use wpa2 for wireless and eeetiger worked with wpa2 - as yet Pupeee 4.2 does not. Not sure if Dinky is available to advise . . .
http://tmxxine.com/wik/wikka.php?wakka=TigerPup
Hi all
pupeee works fine on my 701. One problem I found was that for some reason slimpacks_420.txt wasn't included which made remastering a bit tricky
If anyone wants it, I have remastered pupeee with all the bug fixes (and the slimpacks file). I have made one or two mods though. I prefer gimp to mtpaint, as well as mplayer instead of xine.
If anyone wants to remaster on the eee, you can by making a slight mod to remax, and mounting the current iso as loop.
ie. put the iso somewhere, and mount pupeee.iso /mnt/dvd -o loop
then copy /usr/sbin/remax to /tmp, and edit it. Searh for sr* and change to loop*. Run /tmp/remax and there you go! To remaster pupeee, get slimpacks_420.txt from the standard iso, and download 0dpkg_420 (the first entry in the install list). Make sure you tick "include file list on CD" so slimpacks is also included.
Cheers,
Vader
pupeee works fine on my 701. One problem I found was that for some reason slimpacks_420.txt wasn't included which made remastering a bit tricky
If anyone wants it, I have remastered pupeee with all the bug fixes (and the slimpacks file). I have made one or two mods though. I prefer gimp to mtpaint, as well as mplayer instead of xine.
If anyone wants to remaster on the eee, you can by making a slight mod to remax, and mounting the current iso as loop.
ie. put the iso somewhere, and mount pupeee.iso /mnt/dvd -o loop
then copy /usr/sbin/remax to /tmp, and edit it. Searh for sr* and change to loop*. Run /tmp/remax and there you go! To remaster pupeee, get slimpacks_420.txt from the standard iso, and download 0dpkg_420 (the first entry in the install list). Make sure you tick "include file list on CD" so slimpacks is also included.
Cheers,
Vader
happy with puppeee
A quick pass shows it works on my 2GB surf (700 model) eee. Wireless works. Card reader works. Sound works without running configuration utility.
Thanks to everyone who worked on this project
-Zenko
Thanks to everyone who worked on this project
-Zenko
well thanks goes to alot of people. i simply combine all there work into 1 iso. to save eee users the trouble of hunting it all down.
as for the wifi issues unfortunately its just the limits of the linux drivers. the only way to get full wifi on any distro is to use nds. witch puppy has issues with.
as for the wifi issues unfortunately its just the limits of the linux drivers. the only way to get full wifi on any distro is to use nds. witch puppy has issues with.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
No, that shouldn't be the case. The Eee 1000HA definitely has the Atheros AR5007EG chipset, and this will definitely be supported by the "hal-0.10.5.6" variant of the MADWiFi driver, confirmed by forum member Dpup here -luther349 wrote:eeepc 1000ha wifi uses diffrent drivers madwifi does not see it correctly.
http://www.murga-linux.com/puppy/viewto ... 537#246537
Carlomag wrote:pupeee 4.2 is well working on my old eeepc 701, but does'n catch the right wi-fi card on my new 1000he.
Yes, the 1000HE uses a very new Atheros N-mode chipset, which is not supported by the 2.6.25.16 kernel in Puppy 4.1/4.2.luther349 wrote:for the 1000he owner they use a newer wifi chipset.
No, I think you're confusing models. It's not possible to provide a compatible driver for that chipset with the current Puppy kernel ...luther349 wrote:if you look in the forum link i have with the pets i used someone has posted a driver for that model eeepc.
but it is possible to support that wifi chipset with a newer kernel, as I just reported here -
http://www.murga-linux.com/puppy/viewtopic.php?t=41204
pupeee 4.2 wifi WPA2 TKIP
Tested pupeee4.2 on two ASUS eee 701 4G, and a 1000HA, all work great, wifi to secure DLink WPA2 TKIP detects and connects fine on all three computers, all will auto reconnect on boot. every time. Flash video, and audio works fine.
This message is being input from my ASUS eee 701 4G with pupeee4.2 on a USB flash drive. Another interesting note is that I plugged the eee 701 into a USB keyboard and mouse adapter and into a 8 channel KVM switch and large screen monitor for this message. The all work great out of the box too !!!
Dpup
This message is being input from my ASUS eee 701 4G with pupeee4.2 on a USB flash drive. Another interesting note is that I plugged the eee 701 into a USB keyboard and mouse adapter and into a 8 channel KVM switch and large screen monitor for this message. The all work great out of the box too !!!
Dpup
pupeee 4.2
Hi all, i had a bit of trouble getting to reply to a particular thread but here goes. I had some issues trying to connect to wifi but the following seems to work every time and now it seems pupeee has saved the instructions set and works every time in Australia without having to go through the scan and log procedure each time:
1. Network wizard.
2. select ath0.
3. scan.
4. select wpa/tkip
5. enter the name of your wifi (profile name and ESSID).
enter the passkey.
6. then save.
7. use this profile (which will then try and connect to your wifi net).
8. If you get a successful connect msg and are using DHCP then select DHCP and it will then attempt to config DHCP. If successfull it will ask if you want to save it for future sessions.
9. it will take a few seconds then select done.
This may be old hat for some but for me it took some time as it is not intuitive and it now woks every time for me.
1. Network wizard.
2. select ath0.
3. scan.
4. select wpa/tkip
5. enter the name of your wifi (profile name and ESSID).
enter the passkey.
6. then save.
7. use this profile (which will then try and connect to your wifi net).
8. If you get a successful connect msg and are using DHCP then select DHCP and it will then attempt to config DHCP. If successfull it will ask if you want to save it for future sessions.
9. it will take a few seconds then select done.
This may be old hat for some but for me it took some time as it is not intuitive and it now woks every time for me.