Java 1.6u17
I needed Java Runtime Environment to install and try the package I wanted on my notebook (details below)
Intel Mobile Celeron 550MHz CPU
640K System RAM
63M Extended RAM
128 Cache SRAM
Toshiba MK6015MAP hard disk
running Puppy 4.0 (Full install)
The package I wanted was:
http://www.notamplot.com/
anyway... I never got that far
Installed Java 1.6u7 and got the list of dozens of missing things - decided that it was beyond my capabilities for the moment and un-installed it.
And then fun and games started
Upon re-booting X wouldn't work and took some time to get sorted (it's OK now), but my Seamonkey doesn't work anymore - ie despite network connection being OK, it just give me "Page Load Error"
Anyway... eventually after couple or shutdowns and re-boots my Seamonkey is fine and hopefully I am back where I started
However, the questions remain:
Is Java 1.6u7 OK for Puppy 4.0?
What about all the missing bit?
thanks Chris
Intel Mobile Celeron 550MHz CPU
640K System RAM
63M Extended RAM
128 Cache SRAM
Toshiba MK6015MAP hard disk
running Puppy 4.0 (Full install)
The package I wanted was:
http://www.notamplot.com/
anyway... I never got that far
Installed Java 1.6u7 and got the list of dozens of missing things - decided that it was beyond my capabilities for the moment and un-installed it.
And then fun and games started
Upon re-booting X wouldn't work and took some time to get sorted (it's OK now), but my Seamonkey doesn't work anymore - ie despite network connection being OK, it just give me "Page Load Error"
Anyway... eventually after couple or shutdowns and re-boots my Seamonkey is fine and hopefully I am back where I started
However, the questions remain:
Is Java 1.6u7 OK for Puppy 4.0?
What about all the missing bit?
thanks Chris
Java works alright in puppy 4 when testing via the livecd and pup_save file.bambuko wrote: However, the questions remain:
Is Java 1.6u7 OK for Puppy 4.0?
What about all the missing bit?
thanks Chris
[img]http://img230.imageshack.us/img230/8595/ubd6467dp2.png[/img]
[url=http://www.tinyurl.com/54tu74]Visit The Repository[/url] - Helpful and hard-to-find treats for Puppy 3.
[url=http://www.tinyurl.com/c5a68f]Click Here for Puppy Support Chat, + Helpful Links.[/url]
[url=http://www.tinyurl.com/54tu74]Visit The Repository[/url] - Helpful and hard-to-find treats for Puppy 3.
[url=http://www.tinyurl.com/c5a68f]Click Here for Puppy Support Chat, + Helpful Links.[/url]
so hopefully it should also work with my full install ...Wolf Pup wrote:Java works alright in puppy 4 when testing via the livecd and pup_save file.
why though, all this missing stuff when I install it?
and where do I find it? please
I know that I have stumbled from my normal (beginners) section into "advanced topics" and am totally out of my depth
thanks Chris
Puppy's Dependency Check looks in the wrong places and reports missings libs. Only that Java.pet is needed to get java working, nothing else. If java still does not work, it could be a incomplete download.
[img]http://img230.imageshack.us/img230/8595/ubd6467dp2.png[/img]
[url=http://www.tinyurl.com/54tu74]Visit The Repository[/url] - Helpful and hard-to-find treats for Puppy 3.
[url=http://www.tinyurl.com/c5a68f]Click Here for Puppy Support Chat, + Helpful Links.[/url]
[url=http://www.tinyurl.com/54tu74]Visit The Repository[/url] - Helpful and hard-to-find treats for Puppy 3.
[url=http://www.tinyurl.com/c5a68f]Click Here for Puppy Support Chat, + Helpful Links.[/url]
Test your java Here.
If your using firefox or opera, java is enabled automatically. Seamonkey has to be enabled manually.
If your using firefox or opera, java is enabled automatically. Seamonkey has to be enabled manually.
[img]http://img230.imageshack.us/img230/8595/ubd6467dp2.png[/img]
[url=http://www.tinyurl.com/54tu74]Visit The Repository[/url] - Helpful and hard-to-find treats for Puppy 3.
[url=http://www.tinyurl.com/c5a68f]Click Here for Puppy Support Chat, + Helpful Links.[/url]
[url=http://www.tinyurl.com/54tu74]Visit The Repository[/url] - Helpful and hard-to-find treats for Puppy 3.
[url=http://www.tinyurl.com/c5a68f]Click Here for Puppy Support Chat, + Helpful Links.[/url]
OK I'm an absolute beginner at walking this Puppy thingy. In fact I'm finding just how little I do know about computers since the last few weeks of playing with it., but I DO know it's lightning fast and much more stable than my 98SE, especially in flash chat (doesn't work with the new BBC flash player, of course, but that would be too much to expect of any system outside of the Unseen University) and I'd very much like to get it working to my specs if at all possible,
So, anyway, I downloaded Java-1.6u7.pet (eventually, sigh; it was a massive 34MB and I learned the hard way that seamonkey doesn't seem to have a built-in download manager so when I lost my connection I had to start all over again, this time in Opera which I know I can trust to handle interrupted downloads) and proceeded to install.
I received the following error message ...
"The java-1.6u7.pet package has been downloaded to /root/.packages,
however there is not enough room to uncompress and install it.
The free space is 30370 blocks [my edit, what is a block?] but it is estimated you will need 51200 blocks temporarily for the expansion and install.
Note if you are using a pup_save.3fs personal storage file, it can be made bigger -- see Utilities menu."
I increased my pup save file, (BTW mine shows as a .2fs suffix, not .3fs, if that's important) as suggested, by 512MB, more than doubling it, and when I'd rebooted I saw free space in the system tray
had risen from 219 to 753MB....success!
However when I ran the install again I got the same error message with the SAME figures, i.e. free space is 30370 blocks, 51200 needed!
I'll be very grateful if someone can tell me where I go from here.
I'm starting Puppy 4.0 from a live CD and saving to flash drive.
My RAM is 319MB and processor Pentium II, 350 Mhz.
Please let me know if I need to provide any more information which would assist.
EDIT on 27/08/08 - Two weeks now and not one reply to my query. No-one can offer any suggestions at all?
So, anyway, I downloaded Java-1.6u7.pet (eventually, sigh; it was a massive 34MB and I learned the hard way that seamonkey doesn't seem to have a built-in download manager so when I lost my connection I had to start all over again, this time in Opera which I know I can trust to handle interrupted downloads) and proceeded to install.
I received the following error message ...
"The java-1.6u7.pet package has been downloaded to /root/.packages,
however there is not enough room to uncompress and install it.
The free space is 30370 blocks [my edit, what is a block?] but it is estimated you will need 51200 blocks temporarily for the expansion and install.
Note if you are using a pup_save.3fs personal storage file, it can be made bigger -- see Utilities menu."
I increased my pup save file, (BTW mine shows as a .2fs suffix, not .3fs, if that's important) as suggested, by 512MB, more than doubling it, and when I'd rebooted I saw free space in the system tray
had risen from 219 to 753MB....success!
However when I ran the install again I got the same error message with the SAME figures, i.e. free space is 30370 blocks, 51200 needed!
I'll be very grateful if someone can tell me where I go from here.
I'm starting Puppy 4.0 from a live CD and saving to flash drive.
My RAM is 319MB and processor Pentium II, 350 Mhz.
Please let me know if I need to provide any more information which would assist.
EDIT on 27/08/08 - Two weeks now and not one reply to my query. No-one can offer any suggestions at all?
Last edited by saltydogg on Wed 27 Aug 2008, 14:27, edited 2 times in total.
- Béèm
- Posts: 11763
- Joined: Wed 22 Nov 2006, 00:47
- Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win
Congratulations Bambuko, but please realize that you have a working Java for browsing only.bambuko wrote:Wolf Pup,
I am delighted to report, that the message I got was:
Congratulations!
You have the recommended Java installed (Version 6 Update 7)
and that was on my crappy old notebook using Full install Puppy 4.0
thanks a lot
Chris
If you want to use Java for other applications then please read this thread.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Thanks for your input Béèm, however I am not sure I understand?Béèm wrote:. . . but please realize that you have a working Java for browsing only.
If you want to use Java for other applications then please read this thread.
I do not use Java for browsing at all - I have installed it only to allow me to run specific application (ie Notamplot) that required it.
It runs fine without me having to do anything special ?
Chris
ps having said all this - it is entirely possible that I don't know what I am talking about
java puppy 4.1.1retro
Ups,
somehow I can't install java on my notebook.I have the puppy 4.1.1 retro>
I have downloaded java 1.6u7.pet. Then klick to install .I get the question about installing and after that nothing is happening
somehow I can't install java on my notebook.I have the puppy 4.1.1 retro>
I have downloaded java 1.6u7.pet. Then klick to install .I get the question about installing and after that nothing is happening
Haven't spotted anything newer and have a page I'd like to view which demands x-java-vm so thought I'd give 1.6u10 a try in 4.12-Normal Frugal Seamonkey.
Will report back my results ... if I didn't break something loading this!
OK, I didn't break anything and am pleased to report that it works fine!
The site of interest is an older one with a little Java menu applet I wanted to look at:
http://www.qsl.net/k1yp/BA/ba1.html
Will report back my results ... if I didn't break something loading this!
OK, I didn't break anything and am pleased to report that it works fine!
The site of interest is an older one with a little Java menu applet I wanted to look at:
http://www.qsl.net/k1yp/BA/ba1.html
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
-
- Posts: 21
- Joined: Wed 23 Sep 2009, 04:45
stuck at 'loading applet'
hi...
I tried this pet with Tipsy with Opera, when I check the validate java path in Opera it confirms it however opening a java applet freezes the browser and I can see in the top left corner a window which when I expand says 'loading applet' but does not go further...
one thing to mention is that when I ran the pet there was a long list of missing libraries etc but I read that for the plugin to work with a browser those files are not needed... any one can point me to how to get this to work?
I tried the latest openoffice 3.1.1 sfs file and Tipsy does not seem to recognize it.. it works fine with Puppy 4.3 however but I just love Tipsy for its cool compwiz desktop...
I tried this pet with Tipsy with Opera, when I check the validate java path in Opera it confirms it however opening a java applet freezes the browser and I can see in the top left corner a window which when I expand says 'loading applet' but does not go further...
one thing to mention is that when I ran the pet there was a long list of missing libraries etc but I read that for the plugin to work with a browser those files are not needed... any one can point me to how to get this to work?
I tried the latest openoffice 3.1.1 sfs file and Tipsy does not seem to recognize it.. it works fine with Puppy 4.3 however but I just love Tipsy for its cool compwiz desktop...