HPIJS 3.9.12
After downloading the new HPIJS pet, everything works great printing to a shared printer through CUPS, except after each printing I get the message:
"Can not get the ticket cache for root"
This shows up in the CUPS printer screen on localhost:631.
I can get the printer back by using the cups system to stop and restart the printer. Puppy Google comes up with no hits at all. Any ideas on what is happening here? I'm using Puppy 4.0 and I've got CUPS set up using rcrsn51s directions found here
http://www.murga-linux.com/puppy/viewtopic.php?t=29208
"Can not get the ticket cache for root"
This shows up in the CUPS printer screen on localhost:631.
I can get the printer back by using the cups system to stop and restart the printer. Puppy Google comes up with no hits at all. Any ideas on what is happening here? I'm using Puppy 4.0 and I've got CUPS set up using rcrsn51s directions found here
http://www.murga-linux.com/puppy/viewtopic.php?t=29208
I'll give this just one bump to see if anyone wants to comment. If not, I'll let it die.
My printer is perfectly usable, I just have to stop and start it in CUPS after each job. I think it has something to do with the way CUPS handles Windows user accounts but I haven't figured out how to fix it yet.
My printer is perfectly usable, I just have to stop and start it in CUPS after each job. I think it has something to do with the way CUPS handles Windows user accounts but I haven't figured out how to fix it yet.
hpijs-2.8.7.pet
Howdy
I got the hpijs-2.8.7.pet to work just fine for my HP pcs 1210 all-in-one with dingo 4. It sure installs nicer and faster than in xp.
I haven't tried scanning with it yet but printer works quite nice,
I saw a mention somewhere that the pet doesn't work in Dingo that was dated back a bit. Its working now!
I got the hpijs-2.8.7.pet to work just fine for my HP pcs 1210 all-in-one with dingo 4. It sure installs nicer and faster than in xp.
I haven't tried scanning with it yet but printer works quite nice,
I saw a mention somewhere that the pet doesn't work in Dingo that was dated back a bit. Its working now!
PUPPY DINGO FULL INSTALL WITH EZPUP
P4 2.6 G
P4 2.0 G
P4 1.8 G
PUPPY RULES
[url]http://unclezapaudiozap.freeforums.org/index.php[/url]
[url]http://sadiesdogplace.webs.com/[/url]
[url]http://greenourplanet.webs.com/[/url]
P4 2.6 G
P4 2.0 G
P4 1.8 G
PUPPY RULES
[url]http://unclezapaudiozap.freeforums.org/index.php[/url]
[url]http://sadiesdogplace.webs.com/[/url]
[url]http://greenourplanet.webs.com/[/url]
Does anyone know where I can find hpijs-2.8.7.pet ??
I have tried the hpijs-2.8.9.pet updated one and it doesn't work with my
HP pcs 1210 all-in-one but the hpijs-2.8.7.pet did and now I can not find it.
many thanks
I have tried the hpijs-2.8.9.pet updated one and it doesn't work with my
HP pcs 1210 all-in-one but the hpijs-2.8.7.pet did and now I can not find it.
many thanks
PUPPY DINGO FULL INSTALL WITH EZPUP
P4 2.6 G
P4 2.0 G
P4 1.8 G
PUPPY RULES
[url]http://unclezapaudiozap.freeforums.org/index.php[/url]
[url]http://sadiesdogplace.webs.com/[/url]
[url]http://greenourplanet.webs.com/[/url]
P4 2.6 G
P4 2.0 G
P4 1.8 G
PUPPY RULES
[url]http://unclezapaudiozap.freeforums.org/index.php[/url]
[url]http://sadiesdogplace.webs.com/[/url]
[url]http://greenourplanet.webs.com/[/url]
http://dotpups.de/puppy3/dotpups/Printi ... -2.8.7.pet
http://puppyfiles.ca/dotpupsde/puppy3/d ... -2.8.7.pet
Mark
http://puppyfiles.ca/dotpupsde/puppy3/d ... -2.8.7.pet
Mark
[url=http://murga-linux.com/puppy/viewtopic.php?p=173456#173456]my recommended links[/url]
I also have "Can not get the ticket cache for root" problem
I am printing over a Wifi connection from Puppy 4.1 to a HP Deskjet 3920 connected to Windows XP Home SP3 using the generic postscript method described in http://www.puppylinux.org/wiki/how-tos/ ... ronwindows
AbiWord prints fine but Geany gives the "Can not get the ticket cache for root" error described by Hillside and the log on XP when remote printing a simple file called xxx reports what looks like a postscript formatting error??:
AbiWord prints fine but Geany gives the "Can not get the ticket cache for root" error described by Hillside and the log on XP when remote printing a simple file called xxx reports what looks like a postscript formatting error??:
Error: /undefined in xxx
Operand stack:
Execution stack:
%interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1905 1 3 %oparray_pop 1904 1 3 %oparray_pop 1888 1 3 %oparray_pop 1771 1 3 %oparray_pop --nostringval-- %errorexec_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval--
Dictionary stack:
--dict:1154/1684(ro)(G)-- --dict:0/20(G)-- --dict:70/200(L)--
Current allocation mode is local
Last OS error: No such file or directory
GPL Ghostscript 8.63: Unrecoverable error, exit code 1
HPIJS updated to 2.8.12
Is this OK under 4.2-Final?
Will this be made available for WOOF?
EDIT: Went ahead nd tried it - appears to load OK in 4.2-Final ... but CUPS still is unable to handle my HP OJ-4200 ... sadly, the MS XP version of windows handles the HP printer fine.
Is this OK under 4.2-Final?
Will this be made available for WOOF?
EDIT: Went ahead nd tried it - appears to load OK in 4.2-Final ... but CUPS still is unable to handle my HP OJ-4200 ... sadly, the MS XP version of windows handles the HP printer fine.
Last edited by edoc on Tue 31 Mar 2009, 22:05, edited 1 time in total.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
HP Deskjet F380 failed
Hello,
Wondered if anyone could help. I'm a newbie to puppy and am using Boxpup 4.1.3 which I like a lot. Unfortunately, CUPS printing doesn't seem to work.
Puppy is Boxpup 413
Installed PET package hpijs-2.8.12.pet
Printer is an HP DeskJet F380 all-in-one printer. It's connected via USB.
Symptoms: error message when trying to print via CUPS. Nothing appears on the printer.
In the CUPS browser I get this error:
HP_F380_USB_1 "/usr/lib/cups/filter/foomatic-rip-hplip failed"
Printer details are shown here as:
Description: HP Deskjet F300 series
Location: Local Printer
Printer Driver: HP Deskjet f300 Series Foomatic/hpijs, hpijs 2.8.12.26
Printer State: idle, accepting jobs, published.
Device URI: usb://HP/Deskjet%20F300%20series?serial=CN66UGK1KD04KH
Then I changed /usr/lib/cups/filter/foomatic-rip-hplip to switch debug on.
This creates a logfile in /tmp/foomtic-rip.log
I think that this is the error:
renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 3600" -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
Starting process 23424: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.UTF8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
foomatic-gswrapper: gs '-sstdout=%stderr' '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-dDEVICEWIDTHPOINTS=595' '-dDEVICEHEIGHTPOINTS=842' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=deskjet 3600' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1' '-dIjsUseOutputFD' '-sOutputFile=%stdout' '-'
Insecure dependency in exec while running setuid at /usr/bin/foomatic-gswrapper line 73.
Process 23424 ending: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
renderer return value: 9
renderer received signal: 9
I didn't want to post the entire log file as it's big, but can do it if required.
Anyone have any ideas on what I should do next?
Wondered if anyone could help. I'm a newbie to puppy and am using Boxpup 4.1.3 which I like a lot. Unfortunately, CUPS printing doesn't seem to work.
Puppy is Boxpup 413
Installed PET package hpijs-2.8.12.pet
Printer is an HP DeskJet F380 all-in-one printer. It's connected via USB.
Symptoms: error message when trying to print via CUPS. Nothing appears on the printer.
In the CUPS browser I get this error:
HP_F380_USB_1 "/usr/lib/cups/filter/foomatic-rip-hplip failed"
Printer details are shown here as:
Description: HP Deskjet F300 series
Location: Local Printer
Printer Driver: HP Deskjet f300 Series Foomatic/hpijs, hpijs 2.8.12.26
Printer State: idle, accepting jobs, published.
Device URI: usb://HP/Deskjet%20F300%20series?serial=CN66UGK1KD04KH
Then I changed /usr/lib/cups/filter/foomatic-rip-hplip to switch debug on.
This creates a logfile in /tmp/foomtic-rip.log
I think that this is the error:
renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 3600" -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
Starting process 23424: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.UTF8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
foomatic-gswrapper: gs '-sstdout=%stderr' '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-dDEVICEWIDTHPOINTS=595' '-dDEVICEHEIGHTPOINTS=842' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=deskjet 3600' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1' '-dIjsUseOutputFD' '-sOutputFile=%stdout' '-'
Insecure dependency in exec while running setuid at /usr/bin/foomatic-gswrapper line 73.
Process 23424 ending: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
renderer return value: 9
renderer received signal: 9
I didn't want to post the entire log file as it's big, but can do it if required.
Anyone have any ideas on what I should do next?
@rcrsn51,
thanks for the help. I changed the file and restarted cups - still get the error.
I then rebooted and tried again - same error.
The log file has this - wondered if the 'inappropriate ioctl' bit had any bearing on it. Sorry, managed to miss that line in my earlier post:
Closing renderer
renderer PID kid4=7582
renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 3600" -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
Starting process 7583: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.UTF8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
foomatic-gswrapper: gs '-sstdout=%stderr' '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-dDEVICEWIDTHPOINTS=595' '-dDEVICEHEIGHTPOINTS=842' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=deskjet 3600' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1' '-dIjsUseOutputFD' '-sOutputFile=%stdout' '-'
Insecure dependency in exec while running setuid at /usr/bin/foomatic-gswrapper line 73.
Process 7583 ending: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
renderer return value: 9
renderer received signal: 9
KID3 exited with status 1
Renderer exit stat: 1
tail process done writing data to STDOUT
Process dying with "The renderer command line returned an unrecognized error code 9.", exit stat: 1
error: Inappropriate ioctl for device (25)
Cleaning up ...
Killing process 7582 (KID4) with signal 15
Killing process 7582 (KID4) with signal 9
Closing foomatic-rip.
Renderer process finished
Process dying with "Error closing renderer", exit stat: 1
error: Bad file descriptor (9)
Cleaning up ...
Killing process 7581 (KID3) with signal 15
Killing process 7581 (KID3) with signal 9
thanks for the help. I changed the file and restarted cups - still get the error.
I then rebooted and tried again - same error.
The log file has this - wondered if the 'inappropriate ioctl' bit had any bearing on it. Sorry, managed to miss that line in my earlier post:
Closing renderer
renderer PID kid4=7582
renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 3600" -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
Starting process 7583: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.UTF8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
foomatic-gswrapper: gs '-sstdout=%stderr' '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-dDEVICEWIDTHPOINTS=595' '-dDEVICEHEIGHTPOINTS=842' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=deskjet 3600' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1' '-dIjsUseOutputFD' '-sOutputFile=%stdout' '-'
Insecure dependency in exec while running setuid at /usr/bin/foomatic-gswrapper line 73.
Process 7583 ending: "tee -a /tmp/foomatic-rip.ps | ( foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDE..."
renderer return value: 9
renderer received signal: 9
KID3 exited with status 1
Renderer exit stat: 1
tail process done writing data to STDOUT
Process dying with "The renderer command line returned an unrecognized error code 9.", exit stat: 1
error: Inappropriate ioctl for device (25)
Cleaning up ...
Killing process 7582 (KID4) with signal 15
Killing process 7582 (KID4) with signal 9
Closing foomatic-rip.
Renderer process finished
Process dying with "Error closing renderer", exit stat: 1
error: Bad file descriptor (9)
Cleaning up ...
Killing process 7581 (KID3) with signal 15
Killing process 7581 (KID3) with signal 9