(old)Puppy Linux Discussion Forum

I've tried everything I can find on the forums, still can't get the nvidia driver to load. I'm running Puppy 2.15CE? The latest version anyways,,,,lol I've run the nvidiainstall pet.get and edited till I'm blue in the face.
Specs...
HD install on a SYNTAX mb 1.3 gig AMD, 3/4 gig ram, nvidia GE Force4 MMX400 128mb pci card.
I'd love to get this set up right so the scroll will work smoothly in Seamonkey. That drives me nuts,,,,,,lol

I get the dc:stack underflow error from xorgwizard.

Xorg.conf vvv
#Special base config file used in Puppy Linux.

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
Load "type1"
Load "freetype"

# This loads the GLX module
Load "glx"

# This loads xtrap extension, used by xrandr
Load "xtrap"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R7/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

FontPath "/usr/X11R7/lib/X11/fonts/misc/"
FontPath "/usr/X11R7/lib/X11/fonts/Type1/"
FontPath "/usr/X11R7/lib/X11/fonts/TTF/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...

Option "RandR" "on"

EndSection

#everything past here is auto-generated by Puppy's Xorg Wizard...

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "us" #xkeymap0
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
#Option "Emulate3Timeout" "50"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-82
VertRefresh 56-56
#UseModes "Modes0" #monitor0usemodes
EndSection

Section "Modes"
Identifier "Modes0"
#modes0modeline0
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "DigitalVibrance" # <i>
#Option "NoFlip" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "NoLogo" # [<bool>]
#Option "UBB" # [<bool>]
#Option "Stereo" # <i>
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "VideoKey" # <i>
#Option "NvAGP" # <i>
#Option "IgnoreEDID" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ConnectedMonitor" # <str>
#Option "ConnectedMonitors" # <str>
#Option "TVStandard" # <str>
#Option "TVOutFormat" # <str>
#Option "RenderAccel" # [<bool>]
#Option "CursorShadow" # [<bool>]
#Option "CursorShadowAlpha" # <i>
#Option "CursorShadowXOffset" # <i>
#Option "CursorShadowYOffset" # <i>
#Option "UseEdidFreqs" # [<bool>]
#Option "FlatPanelProperties" # <str>
#Option "TwinView" # [<bool>]
#Option "TwinViewOrientation" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "MetaModes" # <str>
#Option "UseInt10Module" # [<bool>]
#Option "NoTwinViewXineramaInfo" # [<bool>]
#Option "NoRenderExtension" # [<bool>]
#Option "Overlay" # [<bool>]
#Option "CIOverlay" # [<bool>]
#Option "ForceEmulatedOverlay" # [<bool>]
#Option "TransparentIndex" # <i>
#Option "OverlayDefaultVisual" # [<bool>]
#Option "NvEmulate" # <i>
#Option "NoBandWidthTest" # [<bool>]
#Option "CustomEDID-CRT-0" # <str>
#Option "CustomEDID-CRT-1" # <str>
#Option "CustomEDID-DFP-0" # <str>
#Option "CustomEDID-DFP-1" # <str>
#Option "CustomEDID-TV-0" # <str>
#Option "CustomEDID-TV-1" # <str>
#Option "TVOverScan" # <f>
#Option "IgnoreDisplayDevices" # <str>
#Option "MultisampleCompatibility" # [<bool>]
#Option "RegistryDwords" # <str>
#Option "RegistryBinary" # <str>
#Option "NoPowerConnectorCheck" # [<bool>]
#Option "AllowDFPStereo" # [<bool>]
#Option "XvMCUsesTextures" # [<bool>]
#Option "HorizSync" # <str>
#Option "VertRefresh" # <str>
#Option "AllowGLXWithComposite" # [<bool>]
#Option "RandRRotation" # [<bool>]
#Option "ExactModeTimingsDVI" # [<bool>]
#Option "LoadKernelModule" # [<bool>]
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV18 [GeForce4 MX 4000 AGP 8x]"
BusID "PCI:0:11:0"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "TurboQueue" # [<bool>]
#Option "FastVram" # [<bool>]
#Option "HostBus" # [<bool>]
#Option "RenderAcceleration" # [<bool>]
#Option "ForceCRT1Type" # <str>
#Option "ForceCRT2Type" # <str>
#Option "ShadowFB" # [<bool>]
#Option "DRI" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "Vesa" # [<bool>]
#Option "MaxXFBMem" # <i>
#Option "EnableSiSCtrl" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "UseColorHWCursor" # [<bool>]
#Option "Rotate" # <str>
#Option "Reflect" # <str>
#Option "Xvideo" # [<bool>]
#Option "InternalModes" # [<bool>]
#Option "OverruleFrequencyRanges" # [<bool>]
#Option "RestoreBySetMode" # [<bool>]
#Option "ForceCRT1" # [<bool>]
#Option "XvOnCRT2" # [<bool>]
#Option "PanelDelayCompensation" # <i>
#Option "PDC" # <i>
#Option "PanelDelayCompensation2" # <i>
#Option "PDC2" # <i>
#Option "PanelDelayCompensation1" # <i>
#Option "PDC1" # <i>
#Option "EMI" # <i>
#Option "LVDSHL" # <i>
#Option "ForcePanelRGB" # <i>
#Option "SpecialTiming" # <str>
#Option "TVStandard" # <str>
#Option "UseROMData" # [<bool>]
#Option "UseOEMData" # [<bool>]
#Option "YV12" # [<bool>]
#Option "CHTVType" # [<bool>]
#Option "CHTVOverscan" # [<bool>]
#Option "CHTVSuperOverscan" # [<bool>]
#Option "CHTVLumaBandwidthCVBS" # <i>
#Option "CHTVLumaBandwidthSVIDEO" # <i>
#Option "CHTVLumaFlickerFilter" # <i>
#Option "CHTVChromaBandwidth" # <i>
#Option "CHTVChromaFlickerFilter" # <i>
#Option "CHTVCVBSColor" # [<bool>]
#Option "CHTVTextEnhance" # <i>
#Option "CHTVContrast" # <i>
#Option "SISTVEdgeEnhance" # <i>
#Option "SISTVAntiFlicker" # <str>
#Option "SISTVSaturation" # <i>
#Option "SISTVCFilter" # [<bool>]
#Option "SISTVYFilter" # <i>
#Option "SISTVColorCalibFine" # <i>
#Option "SISTVColorCalibCoarse" # <i>
#Option "SISTVXScale" # <i>
#Option "SISTVYScale" # <i>
#Option "TVXPosOffset" # <i>
#Option "TVYPosOffset" # <i>
#Option "SIS6326TVAntiFlicker" # <str>
#Option "SIS6326TVEnableYFilter" # [<bool>]
#Option "SIS6326TVYFilterStrong" # [<bool>]
#Option "SIS6326TVForcePlug" # <str>
#Option "SIS6326FSCAdjust" # <i>
#Option "YPbPrAspectRatio" # <str>
#Option "TVBlueWorkAround" # [<bool>]
#Option "ColorHWCursorBlending" # [<bool>]
#Option "ColorHWCursorBlendThreshold" # <i>
#Option "CRT2Detection" # [<bool>]
#Option "ForceCRT2ReDetection" # [<bool>]
#Option "SenseYPbPr" # [<bool>]
#Option "CRT1Gamma" # [<bool>]
#Option "CRT2Gamma" # [<str>]
#Option "GammaBrightness" # <str>
#Option "GammaBrightnessCRT2" # <str>
#Option "CRT2GammaBrightness" # <str>
#Option "Brightness" # <str>
#Option "NewGammaBrightness" # <str>
#Option "CRT2Brightness" # <str>
#Option "CRT2NewGammaBrightness" # <str>
#Option "Contrast" # <str>
#Option "NewGammaContrast" # <str>
#Option "CRT2Contrast" # <str>
#Option "CRT2NewGammaContrast" # <str>
#Option "CRT1Saturation" # <i>
#Option "XvGamma" # [<str>]
#Option "XvDefaultContrast" # <i>
#Option "XvDefaultBrightness" # <i>
#Option "XvDefaultHue" # <i>
#Option "XvDefaultSaturation" # <i>
#Option "XvDefaultDisableGfx" # [<bool>]
#Option "XvDefaultDisableGfxLR" # [<bool>]
#Option "XvChromaMin" # <i>
#Option "XvChromaMax" # <i>
#Option "XvUseChromaKey" # [<bool>]
#Option "XvInsideChromaKey" # [<bool>]
#Option "XvYUVChromaKey" # [<bool>]
#Option "XvDisableColorKey" # [<bool>]
#Option "XvUseMemcpy" # [<bool>]
#Option "BenchmarkMemcpy" # [<bool>]
#Option "XvDefaultAdaptor" # <str>
#Option "ScaleLCD" # [<bool>]
#Option "CenterLCD" # [<bool>]
#Option "EnableHotkey" # [<bool>]
#Option "ForceCRT1VGAAspect" # <str>
#Option "ForceCRT2VGAAspect" # <str>
#Option "MergedFB" # [<str>]
#Option "TwinView" # [<str>]
#Option "MergedFBAuto" # [<bool>]
#Option "CRT2HSync" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "CRT2VRefresh" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "CRT2Position" # <str>
#Option "TwinViewOrientation" # <str>
#Option "MetaModes" # <str>
#Option "MergedDPI" # <str>
#Option "MergedXinerama" # [<bool>]
#Option "TwinviewXineramaInfo" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
Identifier "Card1"
Driver "sis"
VendorName "Silicon Integrated Systems [SiS]"
BoardName "65x/M650/740 PCI/AGP VGA Display Adapter"
BusID "PCI:1:0:0"
EndSection


Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1024x768"
EndSubsection
EndSection

#PuppyHardwareProfile=NVIDIAWDE1907

Thanks in advance for any help!
Mark

You can try:

1. My steps (from Puppy Projects » Beryl):
You must start Puppy with Xorg as xserver, then install and don't restart X or exit to prompt:

mesa-6.5.pup[download here]
NVIDIA-9629-k2.6.18.1.tar.gz [download here] (just extract all files to /)
Then run: Configure your xorg.conf file with this command: Restart X

Or
2. MU's Nvidia-installer

Or, if you have the devx file installed (and you might need the kernel source), download the driver/installer from Nvidia. Nivida seems to support linux very well.