thanks, but unfortunately ... NOT.
I installed everything using 3DCC (in the meanwhile, it was changed to download from puppyfiles.org, so it works now).
I have to change xorg.conf, insert "Load "dri"" manually,
now, i've come a bit further:
my Xorg.0.log:
Code: Select all
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.18-inside-sandbox i386
Current Operating System: Linux puppypc 2.6.18.1 #1 Sat Nov 11 07:52:06 PUP 2006 i686
Build Date: 08 August 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 28 21:09:44 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to "/usr/X11R7/lib/X11/fonts/misc/,/usr/X11R7/lib/X11/fonts/Type1/,/usr/X11R7/lib/X11/fonts/TTF/"
(**) RgbPath set to "/usr/X11R7/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R7/lib/xorg/modules"
(**) Option "DontZap"
(**) Option "RandR" "on"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R7/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R7/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(--) using VT number 3
(II) PCI: PCI scan (all values are in hex)
[...]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R7/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R7/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/X11R7/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.0.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R7/lib/xorg/modules/extensions/libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "via"
(II) Loading /usr/X11R7/lib/xorg/modules/drivers/via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 0.1.33
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/X11R7/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/X11R7/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800,
PM800/PM880/CN400
(II) Primary Device is: PCI 01:00:0
(--) Chipset CLE266 found
(!!) VIA Technologies does not support or endorse this driver in any way.
(!!) For support please contact the driver maintainer or your X vendor.
(II) resource ranges after xf86ClaimFixedResources() call:
[...]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R7/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(**) VIA(0): Depth 24, (--) framebuffer bpp 32
(==) VIA(0): RGB weight 888
(==) VIA(0): Default visual is TrueColor
(==) VIA(0): Using HW cursor
(--) VIA(0): Chipset: "CLE266"
(--) VIA(0): mapping MMIO @ 0xde000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xde200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) VIA(0): Chipset Rev.: 17
(WW) VIA(0): Manufacturer plainly copied main PCI ids to Subsystem/Card ids.
(--) VIA(0): Detected VIA EPIA M/MII/....
(==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) VIA(0): videoram = 4096k
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R7/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) VIA(0): I2C bus "I2C bus 1" initialized.
(II) VIA(0): I2C bus "I2C bus 2" initialized.
(II) VIA(0): I2C bus "I2C bus 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R7/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) VIA(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) VIA(0): I2C device "I2C bus 1:ddc2" removed.
(II) VIA(0): Manufacturer: GSM Model: 4ac8 Serial#: 37752
(II) VIA(0): Year: 2006 Week: 1
(II) VIA(0): EDID Version: 1.3
(II) VIA(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) VIA(0): Sync: Separate Composite SyncOnGreen
(II) VIA(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) VIA(0): Gamma: 2.20
(II) VIA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) VIA(0): First detailed timing is preferred mode
(II) VIA(0): redX: 0.641 redY: 0.342 greenX: 0.292 greenY: 0.611
(II) VIA(0): blueX: 0.147 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
(II) VIA(0): Supported VESA Video Modes:
(II) VIA(0): 720x400@70Hz
(II) VIA(0): 640x480@60Hz
(II) VIA(0): 640x480@75Hz
(II) VIA(0): 800x600@60Hz
(II) VIA(0): 800x600@75Hz
(II) VIA(0): 832x624@75Hz
(II) VIA(0): 1024x768@60Hz
(II) VIA(0): 1024x768@75Hz
(II) VIA(0): 1280x1024@75Hz
(II) VIA(0): 1152x870@75Hz
(II) VIA(0): Manufacturer's mask: 0
(II) VIA(0): Supported Future Video Modes:
(II) VIA(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
(II) VIA(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) VIA(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) VIA(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) VIA(0): Supported additional Video Mode:
(II) VIA(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) VIA(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) VIA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) VIA(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) VIA(0): Monitor name: L1950B
(II) VIA(0): Monitor name:
(WW) VIA(0): This device is supposed to have a TV encoder but we are unable to detect it (support missing?).
(II) VIA(0): Monitor0: Using hsync range of 30.00-83.00 kHz
(II) VIA(0): Monitor0: Using vrefresh range of 56.00-71.00 Hz
(II) VIA(0): Clock range: 20.00 to 230.00 MHz
(II) VIA(0): Not using default mode "640x350" (vrefresh out of range)
[...]
(II) VIA(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(--) VIA(0): Display dimensions: (340, 270) mm
(--) VIA(0): DPI set to (76, 72)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R7/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R7/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R7/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xde000000 - 0xdeffffff (0x1000000) MS[B]
[1] 0 0 0xd8000000 - 0xdbffffff (0x4000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xdffffe00 - 0xdffffeff (0x100) MX[B]
[8] -1 0 0xdfffff00 - 0xdfffffff (0x100) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[11] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[12] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[19] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[20] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[21] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(--) VIA(0): mapping framebuffer @ 0xd8000000 with size 0x400000
(==) VIA(0): Write-combining range (0xd8000000,0x400000)
(--) VIA(0): Frame buffer start: 0xb74ef000, free start: 0x300000 end: 0x400000
(--) VIA(0): mapping MMIO @ 0xde000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xde200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) VIA(0): 3D Engine has been initialized.
[b]drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed[/b]
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) VIA(0): [drm] loaded kernel module for "via" driver
(II) VIA(0): [drm] DRM interface version 1.2
(II) VIA(0): [drm] created "via" driver at busid "PCI:1:0:0"
(II) VIA(0): [drm] added 8192 byte SAREA at 0xcc8dd000
(II) VIA(0): [drm] mapped SAREA 0xcc8dd000 to 0xb74ed000
(II) VIA(0): [drm] framebuffer handle = 0xd8000000
(II) VIA(0): [drm] added 1 reserved context for kernel
(II) VIA(0): [dri] visual configs initialized.
(II) VIA(0): [drm] register handle = 0xde000000
(II) VIA(0): [drm] mmio Registers = 0xde000000
(II) VIA(0): [dri] mmio mapped.
(II) VIA(0): VIAInternalScreenInit
(II) VIA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
8 128x128 slots
32 8x8 color pattern slots
(==) VIA(0): Backing store disabled
(II) VIA(0): [drm] Detected AGP vendor 0x1106, device 0x3123
(II) VIA(0): [drm] Didn't find any AGP v3 compatible device. Trying AGP 4X mode.
(II) VIA(0): [drm] Trying to enable AGP fast writes.
(II) VIA(0): [drm] drmAgpEnabled succeeded
(II) VIA(0): [drm] agpAddr = 0xe0000000
(II) VIA(0): [drm] agpBase = (nil)
(II) VIA(0): [drm] agpAddr = 0xe0000000
(II) VIA(0): [drm] agpSize = 0x01e00000
(II) VIA(0): [drm] agp physical addr = 0x00000000
(II) VIA(0): [dri] use agp.
(II) VIA(0): [drm] FBFreeStart= 0x003c0000 FBFreeEnd= 0x003bf000 FBSize= 0xfffff000
(II) VIA(0): [dri] frame buffer initialized.
(II) VIA(0): X context handle = 0x1
(II) VIA(0): [drm] installed DRM signal handler
(II) VIA(0): [DRI] installation complete
(II) VIA(0): [dri] kernel data initialized.
[b](WW) VIA(0): [drm] Failure adding irq handler. Falling back to irq-free operation.[/b]
(II) VIA(0): direct rendering enabled
(II) VIA(0): Benchmarking video copy. Less is better.
(--) VIA(0): Timed libc YUV420 copy... 5809634. Throughput: 81.3 MiB/s.
(--) VIA(0): Timed kernel YUV420 copy... 5731445. Throughput: 82.4 MiB/s.
(--) VIA(0): Timed SSE YUV420 copy... 3258891. Throughput: 144.9 MiB/s.
(--) VIA(0): Timed MMX YUV420 copy... 5427441. Throughput: 87.0 MiB/s.
(--) VIA(0): Ditch 3DNow! YUV420 copy... Not supported by CPU.
(--) VIA(0): Timed MMX2 YUV420 copy... 3293832. Throughput: 143.4 MiB/s.
(--) VIA(0): Using SSE YUV42X copy for video.
(II) VIA(0): [XvMC] Registering viaXvMC.
(II) VIA(0): [XvMC] Initialized XvMC extension.
(**) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse0: Device: "/dev/mouse"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc102"
(**) Keyboard0: XkbModel: "pc102"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded
DRM memory allocation failed
(EE) VIA(0): [XvMC] ViaXvMCCreateSurface: Unable to allocate frambuffer memory!
DRM memory allocation failed
(EE) VIA(0): [XvMC] ViaXvMCCreateSubpicture: Unable to allocate framebuffer memory!
DRM memory allocation failed
DRM memory allocation failed
(EE) VIA(0): [XvMC] ViaXvMCCreateSurface: Unable to allocate frambuffer memory!
DRM memory allocation failed
(EE) VIA(0): [XvMC] ViaXvMCCreateSubpicture: Unable to allocate framebuffer memory!
DRM memory allocation failed
(arrr, [ code] doesn't allow [ b]...)
(the last few lines appeard while trying to start mplayer -vo xvmc -vc ffmpeg12mc [file])
Actually, nothing changed. I cannot use -vo xv or -vo gl, -vo gl2 works but is even slower than normal
any suggestions?