How to get USB arvast WN 220 wifi to work?

[petertosh]

Hi all,
sorry for my english, i'm french^^
I installed puppy 2.13 on my laptope. Everything work perfectly except the sound and the wifi^^

To connect my laptope to internet, i use a usb key arvast WN220
But when i click on connect, i choose connect to internet by network interface, and in "interfaces" there is: "puppy does not see any active ethernet interfaces"

And on driver modules, i don't fond the good driver

Have you got an idea to help me? Wifi with linux is too complicate for a stupid french like me lol

Thanks a milion all^^

[tempestuous]

I think your device contains the Prism3 chipset. For USB devices this chipset is supported by the linux-wlan-ng driver "prism2_usb". It's quite likely that Puppy will automatically load this driver, run "lsmod" to check if it is listed. If not, you can load it manually like this -

modprobe prism2_usb

This driver uses a unique configuration utility, so the Network Wizard cannot be used. Setup instructions for this driver are here http://dotpups.de/dotpups/Wifi/drivers- ... README.txt

[petertosh]

Thank you, my driver is now loaded^^

Now, i just need to configure my network access, i'm going to find san explication in the forum

Thanks again

[petertosh]

hi again^^

Just a last question, i scann to find a network and i find the good one but i need to complete the "Network ID" and the "Frenquency".

How can i find this two parameters?

Thanks a lot^^

[BlackAdder]

petertosh,
You don't need to set either of those. The frequency is set if you have set a channel (so either set a channel or a frequency), and the network id is not an essential parameter to get your wifi talking.

[petertosh]

Perfect, it works

I did a mistake with the wep key

Thanks a milion^^

[petertosh]

Just a question, i don't understand the last sentense :

A script is provided with these commands; /root/my-applications/bin/linux-wlan-connect
Just modify the script to include your wireless settings.

Is that mean if i don't create this script i'll lost my connexion for the next reboot?
Cause when i write "/root/my-applications/bin/linux-wlan-connect"
I have for answer

No such file or directory

Do i need to do something more after connect me on internet?
thanks again

[petertosh]

Ok, i reboot the computer and lost my wireless connexion^^

What can i do to save it?

Thank you.

[petertosh]

i did everything :

#wlanctl-ng wlan0 lnxreq_wlansniff enable=false channel xx
#wlanctl-ng wlan0 p2req_channel_info_results channel xx

wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable
wlanctl-ng wlan0 lnxreq_hostwep decrypt=true encrypt=true
wlanctl-ng wlan0 dot11req_mibset mibattribute=dot11PrivacyInvoked=true
wlanctl-ng wlan0 dot11req_mibset mibattribute=dot11WEPDefaultKeyID=0
wlanctl-ng wlan0 dot11req_mibset mibattribute=dot11ExcludeUnencrypted=true
wlanctl-ng wlan0 dot11req_mibset mibattribute=dot11WEPDefaultKey0=01:23:45:67:89
wlanctl-ng wlan0 lnxreq_autojoin ssid=MY_ESSID authtype=opensystem

But like i said before, if i reboot thecomputer i lost everything and for the next boot i must to do all af this, not very pleasant
Is there is a solution? Writing a script or something else?

Thanks a lot.

[tempestuous]

A script is provided with these commands; /root/my-applications/bin/linux-wlan-connect
Just modify the script to include your wireless settings.

Oops ... this script is only available if the old driver dotpup was installed
http://dotpups.de/dotpups/Wifi/drivers- ... -0.2.5.pup
... but don't install this, because it's the driver for older versions of Puppy.

Let's create a new script now:
start a new document in geany. The first line needs to be this -

#!/bin/sh

Now add all those setup commands. Save this document, call it whatever you want - let's say "moi-wifi" in /root/my-applications/
Now we need to make the script executable, so do this -

chmod 755 /root/my-applications/moi-wifi

Now you can either run this script whenever you want to connect, or if you want to connect EVERY TIME you boot up, add "/root/my-applicaionts/moi-wifi" to the end of /etc/rc.d/rc.local

And a reminder; do not use the Network Wizard.

[petertosh]

Thank you, internet works perfectly^^

Thanks a lot^^