Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Fri 22 Nov 2019, 02:10
All times are UTC - 4
 Forum index » Advanced Topics » Hardware » Networking » Wireless
Realtek 8811CU Wireless LAN 802.11ac USB NIC
Post new topic   Reply to topic View previous topic :: View next topic
Page 1 of 1 [9 Posts]  
Author Message
suor Mariagrazia

Joined: 01 Oct 2019
Posts: 4

PostPosted: Mon 14 Oct 2019, 03:39    Post subject:  Realtek 8811CU Wireless LAN 802.11ac USB NIC
Subject description: How can I find software to use my usb adapter for wireless on my laptop bionic puppy linux
 

Surprised Shocked Goodmorning, I'am Sister Mariagrazia and I'm from Italy. My English is a poor English so I hope you can forgive my bad english.
It is almost one month I had installed bionic pupp - 32bit on my old hp laptop to save it because the hardware even if it is a very poor hardware (hp 6720 con ram da 3 Gb e rom da 120Gb- Cpu celeron I don't remember the number in this moment) it is still in a good state. The wireless port is not so strong and the signal was very low and not stable so I bought in Amazon a usb adapter that was very usefull till I had Windows vista on my lap top but now that I had Bionic pup I have no software to use it on my laptop. I made Computer science 29 years ago but now I'm analphabet especially now that I use a new OS. Is there any people who can help me to use my usb adapter with bionic pup (or can you suggest me a usb adapter I can buy on Amazon that is good also with pc with Puppy linux OS? I hope someone can help me. Bye sr Mariagrazia

P.S.: my email is fsgc.srmg@yahoo.com
Back to top
View user's profile Send private message 
cthisbear

Joined: 29 Jan 2006
Posts: 4449
Location: Sydney Australia

PostPosted: Mon 14 Oct 2019, 05:20    Post subject:  

Specs:

https://support.hp.com/lt-en/document/c01129747

:::::::::::::::

We need your newer wireless adapter...Amazon a usb adapter
brand and number.

OopS: didn't see that...Realtek 8811CU Wireless LAN
And something else....sometimes better to boot with
no Wireless lan inserted.

Then when the desktop comes up...Insert it.
Use Frisbee to connect it.

https://www.bleepingcomputer.com/forums/t/561690/how-to-use-frisbee-in-puppy/

Even your original inbuilt one may surprise you by working OK.

Depending where your router is placed.
Hot spotting from a phone works in Puppy.

I generally like to advocate Radky Stretch.
Kernel options k4.1.48-i686-pae for legacy hardware

http://murga-linux.com/puppy/viewtopic.php?t=112125

I test it on many machines.

Don't tell the Pope I've been nice.

Chris.
Back to top
View user's profile Send private message 
ozsouth

Joined: 01 Jan 2010
Posts: 586
Location: S.E Australia

PostPosted: Mon 14 Oct 2019, 08:23    Post subject:  

As Chris said, your laptop wireless may be OK. Sometimes an F button (perhaps F6) can be pressed to turn it on. If not we can make a driver for your usb adapter.
Would you please run the following commands in a terminal & post the results:

uname -r

lspci
(just post the 'Network' results)

That will tell us what kernel & what laptop adapter(s) you have.
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 12779
Location: Stratford, Ontario

PostPosted: Mon 14 Oct 2019, 08:28    Post subject:  

ozsouth wrote:
lspci
(just post the 'Network' results)


It's a USB adapter.
Back to top
View user's profile Send private message 
OverDrive

Joined: 02 Jan 2006
Posts: 177
Location: Cleveland, OHIO,USA

PostPosted: Mon 14 Oct 2019, 10:06    Post subject:  

Greetings Sister!

And welcome to Puppy Linux!

So in Bionic puppy, you can go to Menu->System->Pup-Sysinfo->Devices->USB Devices->Sumary and then copy and paste the information into a reply here.

Also when you are in Pup-Sysinfo, Please copy and paste the info at Sys-Specs->Kernel

Or if you would like to do this from a terminal window, copy and paste the results of:

uname -a

and

lsusb

When you copy and paste the results from a terminal window, you only need to highlight the results to copy and then paste by clicking right and left mouse(or track pad) buttons simultaneously into the reply.

Also, please verify your CPU is a Celeron 530.

If it is, it will support a 64bit version of puppy linux.

Hope this helps...

Blessings Sister

Overdrive

_________________
Instant Puppy Fan!!!
Back to top
View user's profile Send private message 
suor Mariagrazia

Joined: 01 Oct 2019
Posts: 4

PostPosted: Wed 23 Oct 2019, 03:25    Post subject:  Thank you very much to all of you
Subject description: Answer to your suggestion
 

Thank you very much for your help I'll try to follow your suggestions and after I'll report the result. I really hope to be able to do what you've suggested me. I' m not good in english but also my computer science formation now is prehistory Laughing Rolling Eyes Wink Ciao and as someone asked me God Blessing you for your help. Sr Marygrace
Back to top
View user's profile Send private message 
suor Mariagrazia

Joined: 01 Oct 2019
Posts: 4

PostPosted: Wed 23 Oct 2019, 05:12    Post subject: This is the page of my command table
Subject description: I follow the first suggestion and this is the result
 

# uname -r
4.9.163-lxpup-32-pae

# lspci
00:00.0 Host bridge: Intel Corporation Mobile GME965/GLE960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GME965/GLE960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GME965/GLE960 Integrated Graphics Controller (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82562GT 10/100 Network Connection (rev 03)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03)
10:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4311 802.11b/g WLAN (rev 02)
#
I also follow the suggestion of frisbee as connecting tool but I cannot see my usb adapter, now I will go on in following suggestion
Back to top
View user's profile Send private message 
suor Mariagrazia

Joined: 01 Oct 2019
Posts: 4

PostPosted: Wed 23 Oct 2019, 05:43    Post subject: Other information of my laptop with realteck inside  

My cpu is celeron 550, when I look about it in windows vista I saw it is a 32 bit cpu, isn t it Question
Now I copy the data and I see that is 64 bit is it true Question Question Question
Intel(R) Celeron(R) CPU 550 @ 2.00GHz
Socket Designation: U10
Manufacturer: Intel(R)
Voltage: 1.1 V
External Clock: 133 MHz
Min/Max Speed: 249/1999 MHz
Current Speed of Core 0:1999 MHz
Core Count: 1
64-bit capable: Yes

Frequency governor : performance
Freq. scaling driver : p4-clockmod

l1tf:Mitigation: PTE Inversion
meltdown:Vulnerable
spec_store_bypass:Vulnerable
spectre_v1:Mitigation: __user pointer sanitization
spectre_v2:Mitigation: Full generic retpoline

▶—— /proc/cpuinfo ——◀

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 22
model name : Intel(R) Celeron(R) CPU 550 @ 2.00GHz
stepping : 1
microcode : 0x33
cache size : 1024 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf
bogomips : 3989.96
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
Other data you requested me

1st answer
▶—— USB DEVICES (usb-devices) ——◀

VendorID=1d6b ProductID=0002 Rev=04.09
Manufacturer=Linux 4.9.163-lxpup-32-pae ehci_hcd
Product=EHCI Host Controller
SerialNumber=0000:00:1a.7
Driver=hub

VendorID=1d6b ProductID=0002 Rev=04.09
Manufacturer=Linux 4.9.163-lxpup-32-pae ehci_hcd
Product=EHCI Host Controller
SerialNumber=0000:00:1d.7
Driver=hub

VendorID=0bda ProductID=1a2b Rev=02.00
Manufacturer=Realtek
Product=DISK
Driver=usb-storage

VendorID=1d6b ProductID=0001 Rev=04.09
Manufacturer=Linux 4.9.163-lxpup-32-pae uhci_hcd
Product=UHCI Host Controller
SerialNumber=0000:00:1a.0
Driver=hub

VendorID=1d6b ProductID=0001 Rev=04.09
Manufacturer=Linux 4.9.163-lxpup-32-pae uhci_hcd
Product=UHCI Host Controller
SerialNumber=0000:00:1d.0
Driver=hub

VendorID=046d ProductID=c05a Rev=54.00
Manufacturer=Logitech
Product=USB Optical Mouse
Driver=usbhid

VendorID=1d6b ProductID=0001 Rev=04.09
Manufacturer=Linux 4.9.163-lxpup-32-pae uhci_hcd
Product=UHCI Host Controller
SerialNumber=0000:00:1d.1
Driver=hub

VendorID=1d6b ProductID=0001 Rev=04.09
Manufacturer=Linux 4.9.163-lxpup-32-pae uhci_hcd
Product=UHCI Host Controller
SerialNumber=0000:00:1d.2
Driver=hub

2nd answer
▶—— Linux Kernel ——◀

Kernel Release: 4.9.163-lxpup-32-pae
Build Date: Thu Mar 14 15:41:19 GMT 2019
Build GCC: 8.3.0
OS Support: GNU/Linux
Architecture: i686
SMP Enabled: Yes
PAE Enabled: Yes

Kernel Command Line:
pdrv=033e8fc7-4cfe-9454-bc59-df7329ca862d pmedia=atahd psubdir=/cucciololinusdimg19.03frugal pfix=fsck
I hope the data will be enough Rolling Eyes
Thank you very much for the time you spend to help me and other people who are at the beginning Sr Mariagrazia
Back to top
View user's profile Send private message 
ozsouth

Joined: 01 Jan 2010
Posts: 586
Location: S.E Australia

PostPosted: Wed 23 Oct 2019, 19:39    Post subject:  

Hi.

I've made drivers for your usb adapter and your onboard wireless. usb is easiest, so we'll try that first.
Download .pet file from link: http://s000.tinyupload.com/?file_id=01790101837516616633
Boot up linux without usb adaptor, & run .pet by opening it in file manager (pcmanfm). Then plug in usb adapter & try to set up network connection. You'll need to make a savefile or save folder when you shut down.
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 1 of 1 [9 Posts]  
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Hardware » Networking » Wireless
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.1280s ][ Queries: 11 (0.0281s) ][ GZIP on ]