Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Mon 16 Sep 2019, 08:54
All times are UTC - 4
 Forum index » Advanced Topics » Hardware » Networking » Wireless
Intel 9260 Wi-Fi setup
Post new topic   Reply to topic View previous topic :: View next topic
Page 2 of 3 [44 Posts]   Goto page: Previous 1, 2, 3 Next
Author Message
Terry H

Joined: 29 Mar 2009
Posts: 652
Location: The Heart of Muskoka, ON Canada

PostPosted: Fri 25 Jan 2019, 20:15    Post subject:  

ozsouth wrote:
Modern intel wireless need kernel 4.10 or later. Also need to see which ucode is being sought by system.
To help with diagnosis, please post outputs of each of the following commands (in a terminal):

uname -r

and

dmseg | grep wifi


Intel 9260 is not identified until 4.14.x kernel.
Back to top
View user's profile Send private message 
Semme


Joined: 07 Aug 2011
Posts: 8021
Location: World_Hub

PostPosted: Fri 25 Jan 2019, 20:27    Post subject:  

PASS..
_________________
>>> Living with the immediacy of death helps you sort out your priorities. It helps you live a life less trivial <<<

Last edited by Semme on Fri 25 Jan 2019, 20:29; edited 1 time in total
Back to top
View user's profile Send private message 
RimsOnAToaster

Joined: 25 Jan 2019
Posts: 23

PostPosted: Fri 25 Jan 2019, 20:28    Post subject:  

ozsouth wrote:
uname -r

4.9.58 is returned; I think I'm in the clear kernel-wise.

Quote:
dmseg | grep wif

So the output as typed above returned an error. With a little bit of alteration, I got this result:

Code:
 root# dmesg grep wifi
Linux version 4.9.58 (root@puppypc17434) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5) ) #1 SMP PREEMPT Mon Nov 13 15:54:01 GMT 2017
Command line: BOOT_IMAGE=/vmlinuz pmedia=cd
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000003dfff] usable
BIOS-e820: [mem 0x000000000003e000-0x000000000003ffff] reserved
BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
BIOS-e820: [mem 0x0000000012151000-0x000000006add4fff] usable
BIOS-e820: [mem 0x000000006add5000-0x000000006d656fff] reserved
BIOS-e820: [mem 0x000000006d657000-0x000000006d6a8fff] usable
BIOS-e820: [mem 0x000000006d6a9000-0x000000006d6cffff] ACPI NVS
BIOS-e820: [mem 0x000000006d6d0000-0x000000006da9dfff] reserved
BIOS-e820: [mem 0x000000006da9e000-0x000000006e4c1fff] usable
BIOS-e820: [mem 0x000000006e4c2000-0x000000006e56dfff] reserved
BIOS-e820: [mem 0x000000006e56e000-0x000000006ebfffff] usable
BIOS-e820: [mem 0x000000006ec00000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi:  ACPI 2.0=0x6d6a9000  ACPI=0x6d6a9000  SMBIOS=0x6d94a000  SMBIOS 3.0=0x6d949000  ESRT=0x69d13498  MEMATTR=0x67ab3018
SMBIOS 3.1.1 present.
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00FF000000 mask 7FFF000000 write-combining
  1 base 0000000000 mask 7F80000000 write-back
  2 base 006F000000 mask 7FFF000000 uncachable
  3 base 0070000000 mask 7FF0000000 uncachable
  4 base 0100000000 mask 7F00000000 write-back
  5 base 0200000000 mask 7F80000000 write-back
  6 base 0090000000 mask 7FF0000000 write-combining
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
e820: last_pfn = 0x6ec00 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x0000000069d13498 to 0x0000000069d134d0.
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x0309f000, 0x0309ffff] PGTABLE
BRK [0x030a0000, 0x030a0fff] PGTABLE
BRK [0x030a1000, 0x030a1fff] PGTABLE
BRK [0x030a2000, 0x030a2fff] PGTABLE
BRK [0x030a3000, 0x030a3fff] PGTABLE
BRK [0x030a4000, 0x030a4fff] PGTABLE
RAMDISK: [mem 0x37b6e000-0x37daefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000006D6A9000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000006D6A90C0 0000DC (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000006D6B5610 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x000000006D6A9240 00C3C3 (v02 ALASKA A M I    01072009 INTL 20160930)
ACPI: FACS 0x000000006D6CF080 000040
ACPI: FPDT 0x000000006D6B5730 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x000000006D6B5780 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x000000006D6B5820 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: DBG2 0x000000006D6B5860 000072 (v00 INTEL  GLK-SOC  00000003 BRXT 0100000D)
ACPI: DBGP 0x000000006D6B58E0 000034 (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
ACPI: HPET 0x000000006D6B5920 000038 (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
ACPI: LPIT 0x000000006D6B5960 00005C (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
ACPI: APIC 0x000000006D6B59C0 000084 (v03 INTEL  GLK-SOC  00000003 BRXT 0100000D)
ACPI: NPKT 0x000000006D6B5A50 000065 (v01 INTEL  GLK-SOC  00000003 BRXT 0100000D)
ACPI: SSDT 0x000000006D6B5AC0 003E72 (v02 INTEL  DptfTab  00000003 BRXT 0100000D)
ACPI: SSDT 0x000000006D6B9940 0010B3 (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)
ACPI: SSDT 0x000000006D6BAA00 00153E (v01 Intel_ Platform 00001000 INTL 20160930)
ACPI: AAFT 0x000000006D6BBF40 0002CE (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: SSDT 0x000000006D6BC210 0004D5 (v02 PmRef  Cpu0Ist  00003000 INTL 20160930)
ACPI: SSDT 0x000000006D6BC6F0 000775 (v02 CpuRef CpuSsdt  00003000 INTL 20160930)
ACPI: SSDT 0x000000006D6BCE70 00035F (v02 PmRef  Cpu0Tst  00003000 INTL 20160930)
ACPI: SSDT 0x000000006D6BD1D0 0001E6 (v02 PmRef  ApTst    00003000 INTL 20160930)
ACPI: SSDT 0x000000006D6BD3C0 0028FE (v02 SaSsdt SaSsdt   00003000 INTL 20160930)
ACPI: UEFI 0x000000006D6BFCC0 000042 (v01 ALASKA A M I    00000002      01000013)
ACPI: BGRT 0x000000006D6BFD10 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: WDAT 0x000000006D6BFD50 000104 (v01                 00000000      00000000)
ACPI: WSMT 0x000000006D6BFE60 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
NODE_DATA(0) allocated [mem 0x27fff9000-0x27fffcfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000027fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000003dfff]
  node   0: [mem 0x0000000000040000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x000000000fffffff]
  node   0: [mem 0x0000000012151000-0x000000006add4fff]
  node   0: [mem 0x000000006d657000-0x000000006d6a8fff]
  node   0: [mem 0x000000006da9e000-0x000000006e4c1fff]
  node   0: [mem 0x000000006e56e000-0x000000006ebfffff]
  node   0: [mem 0x0000000100000000-0x000000027fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
On node 0 totalpages: 2006311
  DMA zone: 64 pages used for memmap
  DMA zone: 23 pages reserved
  DMA zone: 3995 pages, LIFO batch:0
  DMA32 zone: 6711 pages used for memmap
  DMA32 zone: 429452 pages, LIFO batch:31
  Normal zone: 24576 pages used for memmap
  Normal zone: 1572864 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
e820: [mem 0x80000000-0xcfffffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 33 pages/cpu @ffff88027fc00000 s96408 r8192 d30568 u524288
pcpu-alloc: s96408 r8192 d30568 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1974937
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz pmedia=cd
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7695916K/8025244K available (9437K kernel code, 996K rwdata, 3384K rodata, 1032K init, 600K bss, 329328K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
   CONFIG_RCU_FANOUT set to non-default value of 32
   RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:4352 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
hpet clockevent registered
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1497.599 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2995.20 BogoMIPS (lpj=1497600)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160831
ACPI: 9 ACPI AML tables successfully acquired and loaded
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Freeing SMP alternatives memory: 44K
smpboot: Max logical packages: 1
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz (family: 0x6, model: 0x7a, stepping: 0x1)
Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
... version:                4
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (12004.92 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x6d6a9000-0x6d6cffff] (159744 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
xor: measuring software checksum speed
   prefetch64-sse:  8024.000 MB/sec
   generic_sse:  6836.000 MB/sec
xor: using function: prefetch64-sse (8024.000 MB/sec)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
raid6: sse2x1   gen()  3562 MB/s
raid6: sse2x1   xor()  2328 MB/s
raid6: sse2x2   gen()  4144 MB/s
raid6: sse2x2   xor()  2759 MB/s
raid6: sse2x4   gen()  4835 MB/s
raid6: sse2x4   xor()  2138 MB/s
raid6: using algorithm sse2x4 gen() 4835 MB/s
raid6: .... xor() 2138 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 12 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88027610A000 000190 (v02 PmRef  Cpu0Cst  00003001 INTL 20160930)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802766ACA00 0001E6 (v02 PmRef  ApIst    00003000 INTL 20160930)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802760DC800 0000C9 (v02 PmRef  ApCst    00003000 INTL 20160930)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: host bridge window [mem 0x1000000010000 window] (ignored, not CPU addressable)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x70000001-0x7fffffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
pci 0000:00:00.1: [8086:318c] type 00 class 0x118000
pci 0000:00:00.1: reg 0x10: [mem 0x80000000-0x80007fff 64bit]
pci 0000:00:02.0: [8086:3185] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:0e.0: [8086:3198] type 00 class 0x040300
pci 0000:00:0e.0: reg 0x10: [mem 0xa1410000-0xa1413fff 64bit]
pci 0000:00:0e.0: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0e.0: System wakeup disabled by ACPI
pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
pci 0000:00:0f.0: reg 0x10: [mem 0xa1419000-0xa1419fff 64bit]
pci 0000:00:0f.0: PME# supported from D3hot
pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
pci 0000:00:12.0: reg 0x10: [mem 0xa1414000-0xa1415fff]
pci 0000:00:12.0: reg 0x14: [mem 0xa1418000-0xa14180ff]
pci 0000:00:12.0: reg 0x18: [io  0xf090-0xf097]
pci 0000:00:12.0: reg 0x1c: [io  0xf080-0xf083]
pci 0000:00:12.0: reg 0x20: [io  0xf060-0xf07f]
pci 0000:00:12.0: reg 0x24: [mem 0xa1417000-0xa14177ff]
pci 0000:00:12.0: PME# supported from D3hot
pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [8086:31d9] type 01 class 0x060400
pci 0000:00:13.1: PME# supported from D0 D3hot D3cold
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [8086:31da] type 01 class 0x060400
pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:13.3: [8086:31db] type 01 class 0x060400
pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
pci 0000:00:13.3: System wakeup disabled by ACPI
pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
pci 0000:00:15.0: reg 0x10: [mem 0xa1400000-0xa140ffff 64bit]
pci 0000:00:15.0: PME# supported from D3hot D3cold
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
pci 0000:00:1f.1: reg 0x10: [mem 0xa1416000-0xa14160ff 64bit]
pci 0000:00:1f.1: reg 0x20: [io  0xf040-0xf05f]
pci 0000:01:00.0: [8086:2526] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xa1300000-0xa1303fff 64bit]
pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:13.0: PCI bridge to [bus 01]
pci 0000:00:13.0:   bridge window [mem 0xa1300000-0xa13fffff]
pci 0000:00:13.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xa1204000-0xa1204fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xa1200000-0xa1203fff 64bit]
pci 0000:03:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:13.2: PCI bridge to [bus 03]
pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:13.2:   bridge window [mem 0xa1200000-0xa12fffff]
pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:04:00.0: reg 0x10: [io  0xd050-0xd057]
pci 0000:04:00.0: reg 0x14: [io  0xd040-0xd043]
pci 0000:04:00.0: reg 0x18: [io  0xd030-0xd037]
pci 0000:04:00.0: reg 0x1c: [io  0xd020-0xd023]
pci 0000:04:00.0: reg 0x20: [io  0xd000-0xd01f]
pci 0000:04:00.0: reg 0x24: [mem 0xa1100000-0xa11001ff]
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:13.3: PCI bridge to [bus 04]
pci 0000:00:13.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:13.3:   bridge window [mem 0xa1100000-0xa11fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 7F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0003e000-0x0003ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x6add5000-0x6bffffff]
e820: reserve RAM buffer [mem 0x6d6a9000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6e4c2000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6ec00000-0x6fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 19.200000 MHz counter
clocksource: Switched to clocksource hpet
FS-Cache: Loaded
pnp: PnP ACPI init
system 00:00: [io  0x0280-0x028f] has been reserved
system 00:00: [io  0x0290-0x029f] has been reserved
system 00:00: [io  0x02a0-0x02af] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [io  0x0680-0x069f] has been reserved
system 00:02: [io  0x0400-0x047f] has been reserved
system 00:02: [io  0x0500-0x05fe] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved
system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:13.0: PCI bridge to [bus 01]
pci 0000:00:13.0:   bridge window [mem 0xa1300000-0xa13fffff]
pci 0000:00:13.1: PCI bridge to [bus 02]
pci 0000:00:13.2: PCI bridge to [bus 03]
pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:13.2:   bridge window [mem 0xa1200000-0xa12fffff]
pci 0000:00:13.3: PCI bridge to [bus 04]
pci 0000:00:13.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:13.3:   bridge window [mem 0xa1100000-0xa11fffff]
pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: resource 11 [mem 0x70000001-0x7fffffff window]
pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window]
pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window]
pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window]
pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window]
pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window]
pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window]
pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window]
pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window]
pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window]
pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window]
pci_bus 0000:01: resource 1 [mem 0xa1300000-0xa13fffff]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xa1200000-0xa12fffff]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xa1100000-0xa11fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2308K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x60ab0000-0x64ab0000] (64MB) mapped at [ffff880060ab0000-ffff880064aaffff]
simple-framebuffer simple-framebuffer.0: framebuffer at 0x90000000, 0x1d5000 bytes, mapped to 0xffffc90000e00000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=800x600x32, linelength=3200
Console: switching to colour frame buffer device 100x37
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=21 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ntfs: driver 2.1.32 [Flags: R/W].
fuse init (API version 7.26)
aufs 4.9-20171030
async_tx: api initialized (async)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:13.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:13.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:13.1:pcie001: service driver pcie_pme loaded
pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:13.2:pcie001: service driver pcie_pme loaded
pcieport 0000:00:13.3: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:13.3:pcie001: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
intel_idle: does not run on family 6 model 122
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (34 C)
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
Failed to find cpu0 device node
Unable to detect cache hierarchy from DT for CPU 0
brd: module loaded
loop: module loaded
HP CISS Driver (v 3.6.26)
nbd: registered device at major 43
mtip32xx Version 1.3.1
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xa1417000 port 0xa1417100 irq 124
ata2: SATA max UDMA/133 abar m2048@0xa1417000 port 0xa1417180 irq 124
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
scsi host2: ahci
scsi host3: ahci
ata3: SATA max UDMA/133 abar m512@0xa1100000 port 0xa1100100 irq 125
ata4: SATA max UDMA/133 abar m512@0xa1100000 port 0xa1100180 irq 125
libphy: Fixed MDIO Bus: probed
thunder-xcv, ver 1.0
thunder-BGX, ver 1.0
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.20
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.58 xhci-hcd
usb usb1: SerialNumber: 0000:00:15.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.58 xhci-hcd
usb usb2: SerialNumber: 0000:00:15.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 7 ports detected
fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-realtek
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver appledisplay
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver synaptics_usb
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
usbcore: registered new interface driver vub300
sdhci-pltfm: SDHCI platform and OF driver helper
EFI Variables Facility v0.08 2004-May-17
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ipip: IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha1) (pkcs1pad(rsa-generic,sha1))
Loaded X.509 cert 'Build time autogenerated kernel key: 2339d462c52cf13678fa50d47e4a7a8a7673af29'
Btrfs loaded, crc32c=crc32c-generic
Key type encrypted registered
hd: no drives specified - use hd=cyl,head,sectors on kernel command line
rtc_cmos 00:04: setting system clock to 2019-01-25 18:24:15 UTC (1548440655)
OF: Duplicate name in testcase-data, renamed to "duplicate-name#1"
### dt-test ### start of unittest - you will see error messages
OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
irq: no irq domain found for /testcase-data/interrupts/intc0 !
OF: overlay: overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8
OF: overlay: overlay #5 is not topmost
### dt-test ### end of unittest - 148 passed, 0 failed
usb 1-1: new full-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-10: ST1000LM049-2GH172, SDM1, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-10: ST1000LM035-1RK172, SDM2, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 1-1: New USB device found, idVendor=8087, idProduct=0025
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-4: New USB device found, idVendor=0781, idProduct=5591
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product: Ultra USB 3.0
usb 2-4: Manufacturer: SanDisk
usb 2-4: SerialNumber: 4C530001210807105054
usb-storage 2-4:1.0: USB Mass Storage device detected
scsi host4: usb-storage 2-4:1.0
usb 1-3: new high-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 1497.599 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1596467b3e4, max_idle_ns: 440795260276 ns
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST1000LM049-2GH1 SDM1 PQ: 0 ANSI: 5
ata3.00: configured for UDMA/133
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-3: New USB device found, idVendor=0781, idProduct=5571
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: Cruzer Fit
usb 1-3: Manufacturer: SanDisk
usb 1-3: SerialNumber: 4C530001190601115135
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi host5: usb-storage 1-3:1.0
usb 1-5: new low-speed USB device number 4 using xhci_hcd
usb 1-5: New USB device found, idVendor=046d, idProduct=c05a
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB Optical Mouse
usb 1-5: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-5/1-5:1.0/0003:046D:C05A.0001/input/input4
hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:15.0-5/input0
usb 1-6: new low-speed USB device number 5 using xhci_hcd
usb 1-6: New USB device found, idVendor=413c, idProduct=2105
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6: Product: Dell USB Keyboard
usb 1-6: Manufacturer: Dell
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.0/0003:413C:2105.0002/input/input5
scsi 4:0:0:0: Direct-Access     SanDisk  Ultra USB 3.0    1.00 PQ: 0 ANSI: 6
sd 4:0:0:0: [sdb] 120127488 512-byte logical blocks: (61.5 GB/57.3 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
hid-generic 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:15.0-6/input0
clocksource: Switched to clocksource tsc
scsi 5:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.00 PQ: 0 ANSI: 6
sd 5:0:0:0: [sdc] 123174912 512-byte logical blocks: (63.1 GB/58.7 GiB)
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00
random: fast init done
sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdc:
sd 5:0:0:0: [sdc] Attached SCSI removable disk
ata2: softreset failed (1st FIS failed)
ata2: softreset failed (1st FIS failed)
ata2: softreset failed (1st FIS failed)
ata2: limiting SATA link speed to 3.0 Gbps
ata2: softreset failed (device not ready)
ata2: reset failed, giving up
scsi 2:0:0:0: Direct-Access     ATA      ST1000LM035-1RK1 SDM2 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sdd] 4096-byte physical blocks
sd 2:0:0:0: [sdd] Write Protect is off
sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1
sd 2:0:0:0: [sdd] Attached SCSI disk
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-10: ST1000LM049-2GH172, SDM1, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      ST1000LM049-2GH1 SDM1 PQ: 0 ANSI: 5
sd 3:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sde] 4096-byte physical blocks
sd 3:0:0:0: [sde] Write Protect is off
sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde: sde1
sd 3:0:0:0: [sde] Attached SCSI disk
Freeing unused kernel memory: 1032K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 784K
Freeing unused kernel memory: 712K
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
random: crng init done
udevd[3041]: starting version 3.2
udevd[3041]: specified group 'input' unknown
udevd[3042]: starting eudev-3.2
udevd[3042]: specified group 'input' unknown
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0 eth0: RTL8168h/8111h at 0xffffc90000c8d000, 70:85:c2:77:d6:54, XID 14100800 IRQ 128
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
input: PC Speaker as /devices/platform/pcspkr/input/input7
Error: Driver 'pcspkr' is already registered, aborting...
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/sound/card0/input6
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
input: HDA Intel Line as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14
input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input15
hpet1: lost 7161 rtc interrupts
[drm] Initialized
r8169 0000:03:00.0 eth0: link down
ip_tables: (C) 2000-2006 Netfilter Core Team
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
udevd[3042]: specified group 'input' unknown
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
root# sd 5:0
[/code]
Last edited by RimsOnAToaster on Fri 25 Jan 2019, 20:38; edited 1 time in total
Back to top
View user's profile Send private message 
RimsOnAToaster

Joined: 25 Jan 2019
Posts: 23

PostPosted: Fri 25 Jan 2019, 20:30    Post subject:  

Semme wrote:
Don't get caught up in the cross-fire and be patient. Stick with rcrsn51's input..
I'm doing my best to stay patient and be as helpful a n00b as possible. Laughing I'm just not sure what rcrsn51 meant by the "UEFI setup" - is that a setting I can adjust from within the OS, or do I need to run a reboot a go into the UEFI menu at startup?
Back to top
View user's profile Send private message 
Semme


Joined: 07 Aug 2011
Posts: 8021
Location: World_Hub

PostPosted: Fri 25 Jan 2019, 20:37    Post subject:  

The latter.

If your card was available, lspci would've listed it as a "Network" controller.

PS - I "DO NOT" know what this refers to..
Quote:
FUJITSU Extended Socket Network Device Driver - version 1.1

_________________
>>> Living with the immediacy of death helps you sort out your priorities. It helps you live a life less trivial <<<
Back to top
View user's profile Send private message 
RimsOnAToaster

Joined: 25 Jan 2019
Posts: 23

PostPosted: Fri 25 Jan 2019, 20:44    Post subject:  

Semme wrote:
The latter.

If your card was available, lspci would've listed it as a "Network" controller.


Thank you for that! I've been through the UEFI of this board a few times now, and I'll check again to see if I missed it, but I can't recall an M.2 setting anywhere. I'm posting the manual here in the event that somebody brighter than me can help parse out my next move.

http://asrock.pc.cdn.bitgravity.com/Manual/J4105-ITX.pdf
Back to top
View user's profile Send private message 
RimsOnAToaster

Joined: 25 Jan 2019
Posts: 23

PostPosted: Fri 25 Jan 2019, 20:48    Post subject:  

Terry H wrote:
ozsouth wrote:
Modern intel wireless need kernel 4.10 or later. Also need to see which ucode is being sought by system.
To help with diagnosis, please post outputs of each of the following commands (in a terminal):

uname -r

and

dmseg | grep wifi


Intel 9260 is not identified until 4.14.x kernel.


Apparently, I can't count. If I need kernel 4.14.x, and I'm at 4.9.58, then my move would be to update the kernel somehow? or would it be using a newer puppy like UPupCC?
Back to top
View user's profile Send private message 
Terry H

Joined: 29 Mar 2009
Posts: 652
Location: The Heart of Muskoka, ON Canada

PostPosted: Fri 25 Jan 2019, 20:57    Post subject:  

RimsOnAToaster wrote:
ozsouth wrote:
uname -r

4.9.58 is returned; I think I'm in the clear kernel-wise.


Quote:
dmseg | grep wifi



You're not in the clear, you need a kernel that is 4.14.x or newer. As in my prior post the Intel 9260 WiFi card isn't identified until the 4.14 kernel newer.


You didn't type the command as ozsouth wrote, you left out the '|' (pipe). Copy and paste from above quoted text.
Back to top
View user's profile Send private message 
oldprinter

Joined: 12 Nov 2017
Posts: 16

PostPosted: Fri 25 Jan 2019, 21:00    Post subject:  

I went thru this a few months ago when I upgraded to a new HP laptop, pure intel.
My old Xenialpup64 which ran beautiflly on the old latop, could not see the wifi, after trying all the advice (almost all of over my abilities), I got a copy of Bionicpup64 (7.9.7). It fired up with everything I needed, It has the 4.19.4 kernel.
Tom
Back to top
View user's profile Send private message 
RimsOnAToaster

Joined: 25 Jan 2019
Posts: 23

PostPosted: Fri 25 Jan 2019, 21:05    Post subject:  

oldprinter wrote:
I went thru this a few months ago when I upgraded to a new HP laptop, pure intel.
My old Xenialpup64 which ran beautiflly on the old latop, could not see the wifi, after trying all the advice (almost all of over my abilities), I got a copy of Bionicpup64 (7.9.7). It fired up with everything I needed, It has the 4.19.4 kernel.
Tom


TOM! You're the man! Thank you for that! Can you hold on for a moment while I try that? I just booted UPupCC and got the same issue, but maybe bionicpup is the move I need to make.


How new was that laptop? Were you able to boot with Legacy BIOS and a live USB or did you need a special UEFI-supporting build of BionicPup64?
Back to top
View user's profile Send private message 
ozsouth

Joined: 01 Jan 2010
Posts: 563
Location: S.E Australia

PostPosted: Fri 25 Jan 2019, 21:30    Post subject:  

Bionicpup is goodbut you may still need the firmware although version 38 is included for intel 9260. I have made a 4.14.39 kernel for Xenialpup64 if you really like that puppy. You would need also an fdrv for firmware. See (all my posts on page):
http://murga-linux.com/puppy/viewtopic.php?p=1010234#1010234

Last edited by ozsouth on Fri 25 Jan 2019, 21:41; edited 1 time in total
Back to top
View user's profile Send private message 
RimsOnAToaster

Joined: 25 Jan 2019
Posts: 23

PostPosted: Fri 25 Jan 2019, 21:39    Post subject:  

ozsouth wrote:
Bionicpup is good. I made a 4.14.39 kernel for Xenialpup64 if you like that pup. Will need also an fdrv for firmware. See (all my posts on page):
http://murga-linux.com/puppy/viewtopic.php?p=1010234#1010234


Hey Ozsouth, that's awesome work there! I personally don't have any preferences for one puppy over another yet, but anything that will make this box of wires and fans run will probably become my go-to. I'm currently struggling to find a UEFI-compatible version of BionicPup. Could the UEFI build of Xenialpup64 I found first be used with your kernel with just a liveUSB?
Also, what's an fdrv?

I'm a Barramundi Farmer in the states - I may need some more handholding than most. Laughing
Back to top
View user's profile Send private message 
ozsouth

Joined: 01 Jan 2010
Posts: 563
Location: S.E Australia

PostPosted: Fri 25 Jan 2019, 21:56    Post subject:  

Short answer yes. fdrv contains just firmware. Earlier, all pups had firmware in their zdrv, but many kernel producers are now separating those. We can also have adrv which we use for browsers & ydrv which we use for miscellaneous items. Many years ago, everthing was in the puppy drive, meaning the slightest update meant repackaging the lot. Example:

Xenialpup64 7.5 has the following .sfs files:
puppy_xenialpup64_7.5.sfs & zdrv_xenialpup64_7.5.sfs

Mine has a smaller zdrv & firmware files in an fdrv. (named to fdrv_xenialpup64_7.5.sfs)
All .sfs go in the usb boot partition & are automatically loaded in succession then merged to boot puppy.
Back to top
View user's profile Send private message 
RimsOnAToaster

Joined: 25 Jan 2019
Posts: 23

PostPosted: Fri 25 Jan 2019, 22:31    Post subject:  

@ozsouth - Thank you for the detailed reply! I've just picked up the kernel and loaded it into the xenialpup 7.5 live USB. I can't seem to get a hold of the fdrv you liked to here: http://www.filepup.net/files/00d2c64e1548468555.html - I keep timing out. Do you have any suggestions?
Back to top
View user's profile Send private message 
ozsouth

Joined: 01 Jan 2010
Posts: 563
Location: S.E Australia

PostPosted: Fri 25 Jan 2019, 22:57    Post subject:  

Just tried it myself - no good (sorry for the disgusting ads - didn't know they were doing that). Try this link:
http://ge.tt/4Pm7XAu2 May need to scroll down.
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 2 of 3 [44 Posts]   Goto page: Previous 1, 2, 3 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Hardware » Networking » Wireless
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.1437s ][ Queries: 11 (0.0194s) ][ GZIP on ]