32-bit UPup Cosmic Cuttlefish 18.10 (Oct 2018) [CLOSED]
I am happy to report that
Simplecom NW601 Wireless USB is solved
thanks to perdido. Thanks mate.
::
From my post here in UPup Cosmic Cuttlefish
http://www.murga-linux.com/puppy/viewto ... 93#1008593
::::::
perdido
" the new pet for upup bionic 18.05 is here "
rtl8812au_rtl8821au-4.3.20_k4.9.96.pet
http://ibm-pc.org/puppy/bionic/rtl8812a ... 4.9.96.pet
:::
Tested by me twice -- booting in a pristine Upup,
I Turned off the start screen.
Enabled firewall and
Next did the sound level
And I had no Lan cable in the desktop.
I installed the above pet by perdido.
I did not Save and Reboot
Instead I hit ...Control -Alt - Backspace together
to go to the prompt.
Then I typed >>>> Xwin and hit >>> Enter
Came back to the desktop
Setup Networking >> Wired or Wireless
Selected Frisbee
Which came up with Wireless networks showing very quickly
Added my password...and it took about 10 seconds to
be enabled and connected.
As stated I did this no save method twice with a pristine Upup.
"""""""'
Then I did another pristine boot...no save
and no Lan cable in.
I installed the pet.
Rebooted with a save file immediately afterstraight afterwards.
I used >> Extension 3 and only 64MBs just as a quick test.
Worked as above flawlessly... and posting now in Upup.
Chris.
Simplecom NW601 Wireless USB is solved
thanks to perdido. Thanks mate.
::
From my post here in UPup Cosmic Cuttlefish
http://www.murga-linux.com/puppy/viewto ... 93#1008593
::::::
perdido
" the new pet for upup bionic 18.05 is here "
rtl8812au_rtl8821au-4.3.20_k4.9.96.pet
http://ibm-pc.org/puppy/bionic/rtl8812a ... 4.9.96.pet
:::
Tested by me twice -- booting in a pristine Upup,
I Turned off the start screen.
Enabled firewall and
Next did the sound level
And I had no Lan cable in the desktop.
I installed the above pet by perdido.
I did not Save and Reboot
Instead I hit ...Control -Alt - Backspace together
to go to the prompt.
Then I typed >>>> Xwin and hit >>> Enter
Came back to the desktop
Setup Networking >> Wired or Wireless
Selected Frisbee
Which came up with Wireless networks showing very quickly
Added my password...and it took about 10 seconds to
be enabled and connected.
As stated I did this no save method twice with a pristine Upup.
"""""""'
Then I did another pristine boot...no save
and no Lan cable in.
I installed the pet.
Rebooted with a save file immediately afterstraight afterwards.
I used >> Extension 3 and only 64MBs just as a quick test.
Worked as above flawlessly... and posting now in Upup.
Chris.
- Attachments
-
- Frisbee.jpeg
- Frisbee connection
- (18.06 KiB) Downloaded 1163 times
-
- Realtek wireless.jpg
- Realtek wireless
- (61.62 KiB) Downloaded 1163 times
eb48ef629811ade688289fc2fb21fa1b upupcc-18.10+3-uefi.iso
Ubuntu updates &
Woof-CE='testing;66661c9a;2018-11-04 07:28:17 +0800'
Ubuntu updates &
Woof-CE='testing;66661c9a;2018-11-04 07:28:17 +0800'
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
+3 update
peebee:
pwidgets does not survive the +3 update... nor can I get them to reinstall? I have used pwidgets since the first alpha upupCC without a problem?
>>>---Indian----->
pwidgets does not survive the +3 update... nor can I get them to reinstall? I have used pwidgets since the first alpha upupCC without a problem?
>>>---Indian----->
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
Re: +3 update
Needs older version of libiw ??sszindian wrote: pwidgets does not survive the +3 update...
Code: Select all
ln -s libiw.so.30 /lib/libiw.so.29
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
pwidgets
'Thanks peebee' did the trick
I have tested a lot of stuff with this UpupCC since you first introduced the alpha and so far it passed everything I've thrown at it, very nice work!!!
>>>---Indian------>
I have tested a lot of stuff with this UpupCC since you first introduced the alpha and so far it passed everything I've thrown at it, very nice work!!!
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
1948ad0209f90691923939da34f8dc28 upupcc-18.10+6-uefi.iso
Ubuntu updates + woof-ce-testing;a3d377a7;2018-11-18
Ubuntu updates + woof-ce-testing;a3d377a7;2018-11-18
Last edited by peebee on Sat 24 Nov 2018, 14:56, edited 1 time in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
-
- Posts: 807
- Joined: Mon 12 Oct 2009, 17:11
Hello
Where can I find Menu Manager or its equivalent on upupcc?
Where can I find Menu Manager or its equivalent on upupcc?
[color=blue]B.K. Johnson
tahrpup-6.0.5 PAE (upgraded from 6.0 =>6.0.2=>6.0.3=>6.0.5 via quickpet/PPM=Not installed); slacko-5.7 occasionally. Frugal install, pupsave file, multi OS flashdrive, FAT32 , SYSLINUX boot, CPU-Dual E2140, 4GB RAM[/color]
tahrpup-6.0.5 PAE (upgraded from 6.0 =>6.0.2=>6.0.3=>6.0.5 via quickpet/PPM=Not installed); slacko-5.7 occasionally. Frugal install, pupsave file, multi OS flashdrive, FAT32 , SYSLINUX boot, CPU-Dual E2140, 4GB RAM[/color]
Applications -> Utility -> PupMenuB.K. Johnson wrote:Where can I find Menu Manager or its equivalent on upupcc?
+6 is available....
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
I can watch iptv with bionicpup64 7.9.7 and mpv. No go in upupcc even installing mpv, libvdpau, vlc. I have switched the kernel to that of bionicpup64 7.9.7 which recognizes my intel graphic. In xerrs.log I find:
What is missing in upupcc?
LATER: in bionicpup64 7.9.7 there is youtube-dl which is used to play iptv streams. It is missing in upupcc. Allthough not solved.
LATER1:
Do I need ffmpeg with gnutls support?
FINAL: I'm able to watch some iptvs by vlc for bionic by festus:
http://www.murga-linux.com/puppy/viewtopic.php?t=113309
I have compiled ffmpeg 3.3.3 with the following recipe:
http://www.linuxfromscratch.org/blfs/vi ... fmpeg.html
Mpv not properly working.
Code: Select all
libva info: VA-API version 1.2.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/i386-linux-gnu/dri/i915_drv_video.so
libva info: va_openDriver() returns -1
LATER: in bionicpup64 7.9.7 there is youtube-dl which is used to play iptv streams. It is missing in upupcc. Allthough not solved.
LATER1:
Code: Select all
mpv http://mediapolisevent.rai.it/relinker/relinkerServlet.htm?cont=2606803
Playing: http://mediapolisevent.rai.it/relinker/relinkerServlet.htm?cont=2606803
[ffmpeg] https protocol not found, recompile FFmpeg with openssl, gnutls or securetransport enabled.
[ffmpeg] Protocol not found. Make sure ffmpeg/Libav is compiled with networking support.
Failed to open http://mediapolisevent.rai.it/relinker/relinkerServlet.htm?cont=2606803.
Exiting... (Errors when loading file)
FINAL: I'm able to watch some iptvs by vlc for bionic by festus:
http://www.murga-linux.com/puppy/viewtopic.php?t=113309
I have compiled ffmpeg 3.3.3 with the following recipe:
http://www.linuxfromscratch.org/blfs/vi ... fmpeg.html
Mpv not properly working.
vlc-3.0.4-i386-cosmic_18.10.sfs
vlc-3.0.4-i386-cosmic_18.10.sfs:
https://drive.google.com/file/d/1rUmcS4 ... sp=sharing
It now works for me. Mpv from ppa:
https://launchpad.net/~djcj/+archive/ub ... /+packages
now works for me (solved dependencies with alien libraries).
https://drive.google.com/file/d/1rUmcS4 ... sp=sharing
It now works for me. Mpv from ppa:
https://launchpad.net/~djcj/+archive/ub ... /+packages
now works for me (solved dependencies with alien libraries).
Same here. I think that pulseaudio is needed for more audio options. But pulseaudio is not recommended in puppy. Only for testing purpouse I removed the built-in apulse and installed pulseaudio obtaining more audio options.Smithy wrote:Hi watchdog, I am only getting audio sink and default for soundcard options in your vlc sfs.Audio/Audio Device. There should be many more options?
Code: Select all
# pulseaudio --start
W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
# vlc
VLC media player 3.0.4 Vetinari (revision 3.0.4-0-gf615db6332)
[0119e4b0] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
[012d47e0] qt interface error: Unable to load extensions module
[0119f570] main playlist: playlist is empty
[a8f16cf0] adaptive demux: Encountered discontinuity
[a8f22900] mpeg4audio packetizer: AAC channels: 2 samplerate: 44100
Failed to open VDPAU backend libvdpau_va_gl.so: cannot open shared object file: No such file or directory
[a8f22900] mpeg4audio packetizer: AAC channels: 2 samplerate: 44100
Failed to open VDPAU backend libvdpau_va_gl.so: cannot open shared object file: No such file or directory
[h264 @ 0x9a028280] get_buffer() failed
[h264 @ 0x9a028280] thread_get_buffer() failed
[h264 @ 0x9a028280] decode_slice_header error
[h264 @ 0x9a028280] no frame!
QObject::~QObject: Timers cannot be stopped from another thread
#
- Attachments
-
- pic.png
- (125.76 KiB) Downloaded 1358 times