Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Tue 25 Nov 2014, 18:17
All times are UTC - 4
 Forum index » Advanced Topics » Hardware » Networking » Wireless
wireless / wifi cards confirmed to work in puppy - OLD LIST
Post_new_topic   Topic_locked View_previous_topic :: View_next_topic
Page 4 of 13 Posts_count   Goto page: Previous 1, 2, 3, 4, 5, 6, ..., 11, 12, 13 Next
Author Message
chicks

Joined: 22 Oct 2007
Posts: 65

PostPosted: Sat 10 Nov 2007, 22:11    Post_subject:  

AirLink 101 AWLH3028

$11 at Fry's

Wizard used rtl8080, no good. Had to blacklist, download Windows drivers from AirLink, works perfectly with ndiswrapper and net8185 ndis driver, including WPA2 security.
Back to top
View user's profile Send_private_message 
iansl2000


Joined: 22 Mar 2006
Posts: 35
Location: UK

PostPosted: Sun 11 Nov 2007, 09:27    Post_subject: BN BlueNEXT BN-WD54G (rt73driver)  

Just got the above USB wireless network adaptor (less than £10 incl postage from ebay) working with puppy 3.01.
The 'Connect' wizard allocated driver rt2570 to this adaptor but has no WPA support.
I blacklisted this driver and loaded rt73 and all works perfectly with native WPA supported.

The easiest wireless card/usb yet.

Ian
Back to top
View user's profile Send_private_message 
setecio

Joined: 01 Nov 2006
Posts: 326
Location: UK

PostPosted: Mon 12 Nov 2007, 18:52    Post_subject:  

Netgear 511T laptop card. working with WPA in Puppy 3.01

I was looking for a 'guaranteed' Puppy card, easily available in the UK, and wanted it to work with a module and NOT ndis ! I bought it six months ago but ran into problems, but now in Puppy 3.01 is was all so easy!

Puppy 3.01 > load ath_pci network module (which seems odd as it gave me the impression is was for desktop cards rather than laptop pcmcia type ... would it be possible to add 'pcmcia' into the text for this module?)

Ah this was soooo easy and pleasant to set up using WPA, it all just worked.

Toshiba Satellite Pro 4200, 500 Mhz, 192 MB, Netgear 511T using ath_pci module and WPA.
Back to top
View user's profile Send_private_message 
kyroc

Joined: 18 Nov 2007
Posts: 15

PostPosted: Sun 18 Nov 2007, 10:53    Post_subject:  

The Belkin USB wireless adapter model FSD7050 works quite well in Puppy 3.01
Back to top
View user's profile Send_private_message 
tommy

Joined: 04 Oct 2005
Posts: 96
Location: Italy

PostPosted: Fri 07 Dec 2007, 14:11    Post_subject:
Sub_title: Belkin F5D7011 PCMCIA 54g wireless - NOW it works
 

I have a quite old Belkin F5D7011 PCMCIA 54g (Broadcom chipset) card and never succeeded in having it working under Puppy 1.13-2.14 on an old Acer Travelmate 514txv notebook (celeron 500 MHz - 256MB ram). It simply never seemed to got power (no led activity). In Windoze 98 it worked well, yet in Win2000 the card hanged the notebook as soon as it got inserted in PCMCIA slot.
Tried the Belkin card today on an Asus notebook ( Pentium 4 M 1.5 GHz - Ram 256 MB ddr) and Puppy 2.16. With the Belkin card inserted, the bcm43xx driver isn't loaded at startup (led lights turned off). I had to load the driver manually, and immediately the power led on the card switched on. Configuring the SSID and channel made it work FLAWLESSLY.
I'll never know if the problem was in puppy 2.14 or in the Acer 514txv motherboard, since that old Acer notebook has been stolen... Crying or Very sad
Back to top
View user's profile Send_private_message 
Lobster
Official Crustacean


Joined: 04 May 2005
Posts: 15117
Location: Paradox Realm

PostPosted: Wed 19 Dec 2007, 00:32    Post_subject:  

Flash wrote:
Something like a spreadsheet wiki? Lobster might know of such a thing.


to add data as a table . . .
http://spreadsheets.google.com/

html tables can be added eg
http://puppylinux.org/wikka/AdditionalPrograms

here is existig wiki Wireless Working info
http://puppylinux.org/wikka/WirelessWorking

you can also add tables in the existig wiki
Code:
{{table columns="3" cellpadding="1" cells="BIG;GREEN;FROGS;yes;yes;no;no;no;###"}}

_________________
Puppy WIKI
Back to top
View user's profile Send_private_message Visit_website 
oldbox

Joined: 18 Dec 2007
Posts: 10

PostPosted: Wed 19 Dec 2007, 23:10    Post_subject: netgear wg121
Sub_title: works with ndiswrapper
 

Netgear WG121 (vendor id 0846 product id 4200 revision number 1.10)
Puppy 3.01
works with Ndiswrapper and drivers from "ndis5" diretory of windows installation/driver CD

must be plugged into a usb2.0 port, does not work in a usb1.1 port, at least not on my machine. Other devices here work in both types of ports on this machine, so I don't think it's my ports.

Puppy was the first distribution besides Win98 that I got this adapter to work with reliably.

At long last!
Back to top
View user's profile Send_private_message 
setecio

Joined: 01 Nov 2006
Posts: 326
Location: UK

PostPosted: Thu 20 Dec 2007, 05:12    Post_subject:  

Netgear WG311 (v1 I think) with Puppy NOP3.01r1 works with ath_pci module using WPA Very Happy
Back to top
View user's profile Send_private_message 
BlackWhizz

Joined: 25 Dec 2007
Posts: 13

PostPosted: Tue 25 Dec 2007, 03:32    Post_subject:  

I jult love puppy, did over a week to install and costumuze it, and it just didint work the second boot.

Got puppy now and it all works out of the box Smile

Got my RaLink RT2400 Wireless lan card working under puppy 3.01 with the experimental driver which was already in the driverpack of puppy.

Sorry for my bad english, im from Holland Wink
Back to top
View user's profile Send_private_message 
jonyo

Joined: 28 Dec 2006
Posts: 2727

PostPosted: Tue 25 Dec 2007, 09:22    Post_subject:  

BlackWhizz wrote:
Got my RaLink RT2400 Wireless lan card working under puppy 3.01 with the experimental driver which was already in the driverpack of puppy.


Got make, model, vers info for the card?
Back to top
View user's profile Send_private_message 
BlackWhizz

Joined: 25 Dec 2007
Posts: 13

PostPosted: Fri 28 Dec 2007, 16:33    Post_subject:  

jonyo wrote:
BlackWhizz wrote:
Got my RaLink RT2400 Wireless lan card working under puppy 3.01 with the experimental driver which was already in the driverpack of puppy.


Got make, model, vers info for the card?

Dont know, but the chip is a RT2400 chip, and i got it from a friend, which wanted 54mbps. That card didnt work under Puppy. The box of the card says its an E-Tech WL-101.
Back to top
View user's profile Send_private_message 
tempestuous

Joined: 10 Jun 2005
Posts: 5285
Location: Australia

PostPosted: Fri 28 Dec 2007, 17:12    Post_subject:  

BlackWhizz wrote:
Got my RaLink RT2400 Wireless lan card working under puppy 3.01 with the experimental driver which was already in the driverpack of puppy.

You may be thinking of the experimental rt2x00 driver, but Puppy does not contain this.
Puppy has the (legacy) rt2400 Linux driver, which is quite stable, not experimental at all.
Back to top
View user's profile Send_private_message 
jonyo

Joined: 28 Dec 2006
Posts: 2727

PostPosted: Sat 29 Dec 2007, 14:15    Post_subject:  

BlackWhizz wrote:
The box of the card says its an E-Tech WL-101.

Thx for that info. Any detailed info can greatly help others with a search.
Back to top
View user's profile Send_private_message 
mark2


Joined: 20 Aug 2006
Posts: 104
Location: Bristol, UK

PostPosted: Sat 29 Dec 2007, 16:01    Post_subject:  

The TP-link wn610g v1.1 works in 2.15 using the ath_pci driver.
don't expect problems under 3.01 either

_________________

www.crowncarcare.co.uk
Back to top
View user's profile Send_private_message Visit_website MSNM 
edoc


Joined: 07 Aug 2005
Posts: 4389
Location: Southeast Georgia, USA

PostPosted: Sat 29 Dec 2007, 16:26    Post_subject: USB Wireless Modem - Franklin CDU550
Sub_title: shell script to create a node for "C-motech" modem
 

I tried to follow the instructions (below) but am not certain how to proceed. It is very possible that I skipped a step or did something else incorrectly. Here are the steps I followed:

1. Opened geany
2. Pasted in all of the text following "Code:" below.
3. Saved as /root/my-applications/franklincdu550/cdu550.sh
4. cd to: /root/my-applications/franklincdu550
5. Clicked on "cdu550.sh"
6. No errors, just a new "#" prompt

Did I do things correctly?

How do I get Setup - Network Wizard to see my USB modem, please?

Quote:
Here is the information (direct from Franklin) for getting the Franklin USB EVDO CDU-550 Modem working with Linux.

Quote:
Linux systems already have USB modem driver but needs to assign a device to a special node. After the assignment, user can use the node as a modem device.

Attached file is a shell script to create a node for "C-motech" modem. The script produces nodes which mount modem as a serial device. The CDU-550 modem will be mounted on /dev/ttyACM# where # is a number, for example, /dev/ttyACM2.

Code:
#!/bin/bash
# usb : acm
echo -e "\033[32mMake Modem Device\033[0m"
for i in `seq 0 2` ; do
mknod /dev/ttyACM$i c 166 $i
done

echo -e "\033[32mMake Dual Mode Device\033[0m"
for i in `seq 0 2` ; do
mknod /dev/ttyUSB$i c 188 $i
done

echo -e "\033[32mMake driver rule\033[0m"
/sbin/modprobe usbserial vendor=0x16d8 product=0x5511
/sbin/modprobe usbserial vendor=0x16d8 product=0x5512
/sbin/modprobe usbserial vendor=0x16d8 product=0x5513
/sbin/modprobe usbserial vendor=0x16d8 product=0x5521
/sbin/modprobe usbserial vendor=0x16d8 product=0x5522
/sbin/modprobe usbserial vendor=0x16d8 product=0x5523
/sbin/modprobe usbserial vendor=0x16d8 product=0x5531
/sbin/modprobe usbserial vendor=0x16d8 product=0x5532
/sbin/modprobe usbserial vendor=0x16d8 product=0x5533
/sbin/modprobe usbserial vendor=0x16d8 product=0x5541
/sbin/modprobe usbserial vendor=0x16d8 product=0x5542
/sbin/modprobe usbserial vendor=0x16d8 product=0x5543
/sbin/modprobe usbserial vendor=0x16d8 product=0x5551
/sbin/modprobe usbserial vendor=0x16d8 product=0x5552
/sbin/modprobe usbserial vendor=0x16d8 product=0x5553
/sbin/modprobe usbserial vendor=0x16d8 product=0x5561
/sbin/modprobe usbserial vendor=0x16d8 product=0x5562
/sbin/modprobe usbserial vendor=0x16d8 product=0x5563
/sbin/modprobe usbserial vendor=0x16d8 product=0x6011
/sbin/modprobe usbserial vendor=0x16d8 product=0x6012
/sbin/modprobe usbserial vendor=0x16d8 product=0x6013
/sbin/modprobe usbserial vendor=0x16d8 product=0x6021
/sbin/modprobe usbserial vendor=0x16d8 product=0x6022
/sbin/modprobe usbserial vendor=0x16d8 product=0x6023
/sbin/modprobe usbserial vendor=0x16d8 product=0x6511
/sbin/modprobe usbserial vendor=0x16d8 product=0x6512
/sbin/modprobe usbserial vendor=0x16d8 product=0x6513
/sbin/modprobe usbserial vendor=0x16d8 product=0x6521
/sbin/modprobe usbserial vendor=0x16d8 product=0x6522
/sbin/modprobe usbserial vendor=0x16d8 product=0x6523
/sbin/modprobe usbserial vendor=0x16d8 product=0x6531
/sbin/modprobe usbserial vendor=0x16d8 product=0x6532
/sbin/modprobe usbserial vendor=0x16d8 product=0x6533
/sbin/modprobe usbserial vendor=0x16d8 product=0x6541
/sbin/modprobe usbserial vendor=0x16d8 product=0x6542
/sbin/modprobe usbserial vendor=0x16d8 product=0x6543
/sbin/modprobe usbserial vendor=0x16d8 product=0x6551
/sbin/modprobe usbserial vendor=0x16d8 product=0x6552
/sbin/modprobe usbserial vendor=0x16d8 product=0x6553
/sbin/modprobe usbserial vendor=0x16d8 product=0x6561
/sbin/modprobe usbserial vendor=0x16d8 product=0x6562
/sbin/modprobe usbserial vendor=0x16d8 product=0x6563

_________________
Thanks! David
Home page: http://nevils-station.com
Don't google Search! http://duckduckgo.com
Puppy upup Raring 3992 & Lighthouse64-b602
Back to top
View user's profile Send_private_message Visit_website 
Display_posts:   Sort by:   
Page 4 of 13 Posts_count   Goto page: Previous 1, 2, 3, 4, 5, 6, ..., 11, 12, 13 Next
Post_new_topic   Topic_locked View_previous_topic :: View_next_topic
 Forum index » Advanced Topics » Hardware » Networking » Wireless
Jump to:  

Rules_post_cannot
Rules_reply_cannot
Rules_edit_cannot
Rules_delete_cannot
Rules_vote_cannot
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.0956s ][ Queries: 12 (0.0079s) ][ GZIP on ]