ArtfulPup (& Upup-Bionic-Beaver-RC)

Message

peebee · #541 Post by **peebee** » Sat 17 Mar 2018, 19:23

ally wrote:peebee

I get failed to create new file

Hi Ally

This is an ArtfulPup update....

Did you apply the +16 delta to the original artfulpup-17.11.iso with md5 =
0625cacc699dc6127b1ceea44df5070f

Cheers
peebee

Billtoo · #542 Post by **Billtoo** » Sat 17 Mar 2018, 22:23

I installed to the hard drive of my HP desktop:

System: Host: puppypc20199 Kernel: 4.9.59-lxpup-32-pae i686 bits: 32 Desktop: JWM 2.3.7
Distro: ArtfulPup 17.11
Machine: Device: desktop System: Hewlett-Packard product: HPE-410f serial: MXX0370KF3
Mobo: FOXCONN model: 2AB1 v: 1.00 serial: N/A BIOS: American Megatrends v: 6.02 date: 07/21/2010
CPU: 6 core AMD Phenom II X6 1045T (-MCP-) speed/max: 800/2700 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Redwood PRO [Radeon HD 5550/5570/5630/6510/6610/7570]
Display Server: X.Org 1.19.5 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
Resolution: 1920x1080@60.00hz, 1920x1080@60.00hz
OpenGL: renderer: AMD REDWOOD (DRM 2.49.0 / 4.9.59-lxpup-32-pae, LLVM 5.0.0) version: 3.3 Mesa 17.2.8
Network: Card-1: Ralink RT3090 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller driver: r8169
Drives: HDD Total Size: 1071.2GB (2.1% used)
Weather: Conditions: 36 F (2 C) - Partly Cloudy Time: March 17, 6:18 PM EDT
Info: Processes: 218 Uptime: 1:37 Memory: 233.2/8092.3MB Client: Shell (bash) inxi: 2.3.56

Installed kpat,vlc,and kodi with PPM.

No problems so far,
Thanks.
------------------------------------------------------------------------------

EDIT: I had to use "check dependencies installed package" from the
setup menu (for kodi) and installed them with PPM, it's working fine now.
I think doing that may have broken TAS, it gives ffmpeg errors, I
installed PupSnap-2.6_Scrot-0.8_32Bit.pet and that's working fine.

Added pminstaller-0.2.4.tar.bz2 and am running 27.8.1.
Also added smplayer/smtube with PPM and that's working well.

I think this could be my new favorite pup until bionic gets to final
release

Thanks.

Papy · #543 Post by **Papy** » Sun 18 Mar 2018, 11:48

Question about obsolate seasonal ubuntu versions here
Bionic is not released and artful is still running.. What Ubuntu version should be used ?

ally · #544 Post by **ally** » Sun 18 Mar 2018, 12:05

hi peebee

I had to re download both ISO and delta to get it to work

all sorted

xyz · #545 Post by **xyz** » Mon 19 Mar 2018, 00:53

Artfulpup HU just released by Skamilinux HU installed tonight, palemoon is the default browser. Kernel 3.14.79
"Unfortunately, registration is disabled due to copious amounts of spammers. Contact Admin directly if you have any questions." PuppyLinux blog..

Billtoo · #546 Post by **Billtoo** » Mon 19 Mar 2018, 01:55

I remastered my ArtfulPup 17.11.16 install:

System: Host: puppypc11962 Kernel: 4.9.59-lxpup-32-pae i686 bits: 32 Desktop: JWM 2.3.7
Distro: ArtfulPup 17.11
Machine: Device: desktop System: ACER product: Aspire M5620 v: R01-A4 serial: PTS860X0348050CF642700
Mobo: ACER model: G33T-AM v: 1.0 serial: 00000000 BIOS: American Megatrends v: R01-A4 date: 12/19/2007
CPU: Quad core Intel Core2 Quad Q6600 (-MCP-) speed/max: 1603/2403 MHz
Graphics: Card: NVIDIA GF108 [GeForce GT 430]
Display Server: X.Org 1.19.5 driver: nvidia Resolution: 1920x1080@60.00hz, 1920x1080@60.00hz
OpenGL: renderer: GeForce GT 430/PCIe/SSE2 version: 4.5.0 NVIDIA 390.42
Network: Card: Intel 82566DC-2 Gigabit Network Connection driver: e1000e
Drives: HDD Total Size: 626.4GB (1.1% used)
Weather: Conditions: 27 F (-3 C) - Mostly Cloudy Time: March 18, 9:34 PM EDT
Info: Processes: 197 Uptime: 21 min Memory: 183.4/8097.4MB Client: Shell (bash) inxi: 2.3.37

After booting on my Acer from another pup I mounted the remaster dvd
and copied everything to a folder, ran grub-4-dos and rebooted to the
remaster.
Surprised me when it booted up

I loaded the devx and kernel source sfs's, blacklisted nouveau, and
rebooted, then installed the newest Nvidia driver.
It gave an error about kernel source mismatch but it seems to be working
okay.

The size of the remaster iso was just over 800 mb.

EDIT: screenshot2 is the remaster dvd running on macmini, gives option to save at end of session.

petihar · #547 Post by **petihar** » Tue 20 Mar 2018, 09:30

Good morning,
I know that operating Bluetooth with a puppy is a real challenge... If someone managed to take up this challenge with ArtfullPup or Upup-Bionic, what are the packages to install to make this bluetooth work easily and correctly?
Sincerely yours, petihar.

peebee · #548 Post by **peebee** » Tue 20 Mar 2018, 10:05

Upup_Bionic_Beaver Alpha Update

+6 delta

.iso md5 = 9b024f7f325db2e54ce59113724bdd64 Upup_Bionic_Beaver-18.03+6.iso

- LOTS of upstream Ubuntu-BB updates

Marv · #549 Post by **Marv** » Tue 20 Mar 2018, 14:43

+6 delta applied, md5sum of generated iso correct, normal +5 to +6 update on my i5 based laptop. No change on the Glib errors or glxgears front. I'll run with it as daily for a bit.

Thanks,

Billtoo · #550 Post by **Billtoo** » Tue 20 Mar 2018, 19:42

I installed Upup_Bionic_Beaver-18.03+6.iso to a 64gb usb-3.0 flash drive:

System: Host: puppypc13467 Kernel: 4.9.86-lxpup-32-pae i686 bits: 32 Desktop: JWM 2.3.7
Distro: UBB-Pup 18.03
Machine: Device: desktop System: HP product: 260-p029 serial: CNV6240BWP
Mobo: HP model: 81B4 v: 01 serial: PFPSK0BWJ301LW
UEFI [Legacy]: AMI v: F.04 date: 05/10/2016
CPU: Dual core Intel Core i3-6100T (-MT-MCP-) speed/max: 800/3101 MHz
Graphics: Card: Intel HD Graphics 530
Display Server: X.Org 1.19.6 drivers: modesetting (unloaded: fbdev,vesa)
Resolution: 1920x1080@60.00hz Advanced Data: N/A for root
Network: Card-1: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller driver: r8169
Card-2: Realtek RTL8723BE PCIe Wireless Network Adapter driver: rtl8723be
Drives: HDD Total Size: 2063.5GB (0.3% used)
Weather: Conditions: 37 F (3 C) - Partly Cloudy Time: March 20, 3:26 PM EDT
Info: Processes: 205 Uptime: 11 min Memory: 188.1/3898.7MB Client: Shell (bash) inxi: 2.3.56

Added applications with PPM + pminstaller-0.2.4.tar.bz2
Kodi still segfaults,but kpat,vlc-3.01,smplayer/smtube okay.
Added "intel_pstate=disable" to the kernel line of the menu.lst file.

Thanks.

666philb · #551 Post by **666philb** » Fri 23 Mar 2018, 13:58

hi peebee,

it's looking good.!

concerning those glib errors. i noticed that reinstalling 'libglib' fixed most of them so had a look the debs 'postinst' script.
and adding the following to '_00build.conf' sorts it .....

Code: Select all

usr/lib/glib-2.0/glib-compile-schemas usr/share/glib-2.0/schemas || true
usr/lib/glib-2.0/gio-querymodules usr/lib/gio/modules || true

you still get the odd warning, mainly from non natively compiled apps, but it certainly clears up xerrs.log quite a bit.

also 'libglx-mesa0' needs adding for glxgears & 3d to work.

cheers
phil

peebee · #552 Post by **peebee** » Fri 23 Mar 2018, 20:18

Thanks Phil - much appreciated - both changes are in:

delta +7
iso md5 = 85803a63a215a854dcfeec3237704254 Upup_Bionic_Beaver-18.03+7.iso

Also loads of upstream UBB changes.

Warnings are definitely reduced, but leafpad still gives:

# leafpad
(leafpad:10062): GLib-GObject-WARNING **: 16:22:47.834: Two different plugins tried to register 'GLibProxyResolver'.
(leafpad:10062): GLib-GObject-CRITICAL **: 16:22:47.834: g_type_add_interface_dynamic: assertion 'G_TYPE_IS_INSTANTIATABLE (instance_type)' failed
(leafpad:10062): GLib-GIO-WARNING **: 16:22:47.834: Tried to register an extension of the type (null) to extension point gio-proxy-resolver. Expected type is GProxyResolver.

Marv · #553 Post by **Marv** » Fri 23 Mar 2018, 21:28

+6 updated to +7 on the i5 laptop. Direct rendering now exists with smoother scrolling in browser. glxgears now runs albeit with much lower FPS than I would expect from this laptop, 1100 FPS vs 8700 in other pups on this hardware. I'll look at what renderer is used vs other pups later.

Code: Select all

# inxi -Fxx
System:    Host: puppypc32150 Kernel: 4.9.86-lxpup-32-pae i686 (32 bit gcc: 7.3.0) Desktop: JWM 2.3.7 dm: N/A
           Distro: UBB-Pup 18.03
Machine:   Device: laptop System: FUJITSU product: LIFEBOOK S761 serial: R2500459
           Mobo: FUJITSU model: FJNB225 UEFI [Legacy]: FUJITSU // Phoenix v: Version 1.17 date: 03/14/2012
           Chassis: AOD47CE51CBA7001 type: 10
Battery    CMB1: charge: 56.0 Wh 100.0% condition: 56.0/56.0 Wh (100%) volts: 12.7/11.1
           model: Fujitsu CP293600-01 serial: 01A-X110812201059X status: Full
CPU:       Dual core Intel Core i5-2520M (-HT-MCP-) cache: 3072 KB
           flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9967
           clock speeds: min/max: 800/2501 MHz 1: 2501 MHz 2: 2501 MHz 3: 2501 MHz 4: 2501 MHz
Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
           bus-ID: 00:02.0 chip-ID: 8086:0126
           Display Server: X.org 1.19.6 drivers: modesetting (unloaded: fbdev,vesa)
           tty size: 149x38 Advanced Data: N/A for root
Audio:     Card Intel 6 Series/C200 Series Family High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:1c20
           Sound: Advanced Linux Sound Architecture v: k4.9.86-lxpup-32-pae
Network:   Card: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express)
           driver: ath9k bus-ID: 02:00.0 chip-ID: 168c:002e
           IF: wlp2s0 state: up mac: 24:ec:99:24:3b:d1
Drives:    HDD Total Size: 64.0GB (41.6% used)
           ID-1: /dev/sda model: SAMSUNG_SSD_830 size: 64.0GB serial: N/A
RAID:      System: supported: linear raid0 raid1 raid10 raid6 raid5 raid4
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 188 Uptime: 10 min Memory: 406.6/4881.6MB Init: SysVinit v: N/A runlevel: 5 Gcc sys: N/A
           Client: Shell (bash 4.4.181 running in lxterminal) inxi: 2.3.7

Thanks,

Edit:

In ArtfulPup, irregardless of the kernel used, the renderer info is:
Vendor: Intel Open Source Technology Center
Renderer: Mesa PRI Intel(R) SandyBridge Mobile X86/MMX/SSE2
Version: 3.0 Mesa 17.2.8

In ubb, also irregardless of the kernel used the renderer info is:
Vendor: VMware Inc.
Renderer: livmpipe (LLVM 6.0)
Version: 3.0 Mesa 18.0.0-rc5

My guess is that this is the difference in glxgears FPS.

sszindian · #554 Post by **sszindian** » Fri 23 Mar 2018, 23:49

UBB-Pup 18.03+6

I realize it's early in the development of this new pup but since it seems to handle very well all of my 'need' programs brought over from other pup's I figured I'd give Google Earth a shot... My old favorite- Google Earth 6.2.2.sfs runs so well in other pup's I tried that first... Splash Screen appears but the main program does not run? Tried several other versions of Google Earth.sfs's with no success either! Hopefully it gotta be something simple?

>>>---Indian------>

Terry H · #555 Post by **Terry H** » Sat 24 Mar 2018, 02:05

Updated from UBB 18.03 +4 to +7 on Dell Latitude 3350 Core i3-5005U.

All still running smoothly.

Code: Select all

# inxi -Fxz
System:    Host: puppypc25711 Kernel: 4.9.86-lxpup-32-pae i686
           bits: 32 gcc: 7.3.0
           Desktop: JWM 2.3.7 Distro: UBB-Pup 18.03
Machine:   Device: laptop System: Dell product: Latitude 3350 serial: <filter>
           Mobo: Dell model: 0KVTCC v: A00 serial: <filter>
           UEFI: Dell v: A13 date: 01/23/2018
Battery    BAT0: charge: 33.2 Wh 93.8% condition: 35.4/43.7 Wh (81%)
           model: Samsung SDI DELL 6C0FN58 status: N/A
CPU:       Dual core Intel Core i3-5005U (-MT-MCP-) 
           arch: Broadwell rev.4 cache: 3072 KB
           
           flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7981
           clock speeds: max: 2000 MHz 1: 600 MHz 2: 1000 MHz 3: 1100 MHz
           4: 700 MHz
Graphics:  Card: Intel HD Graphics 5500 bus-ID: 00:02.0
           Display Server: X.Org 1.19.6
           drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.00hz
           OpenGL: renderer: llvmpipe (LLVM 6.0, 256 bits)
           version: 3.3 Mesa 18.0.0-rc5 Direct Render: Yes
Audio:     Card-1 Intel Broadwell-U Audio Controller
           driver: snd_hda_intel bus-ID: 00:03.0
           Card-2 Intel Wildcat Point-LP High Def. Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture v: k4.9.86-lxpup-32-pae
Network:   Card-1: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 03:00.0
           IF: enp3s0 state: down mac: <filter>
           Card-2: Intel Wireless 7265 driver: iwlwifi bus-ID: 04:00.0
           IF: wlp4s0 state: up mac: <filter>
Drives:    HDD Total Size: 530.9GB (0.8% used)
           ID-1: /dev/sda model: TOSHIBA_MQ01ACF0 size: 500.1GB
           ID-2: /dev/sdb model: Ultra_Fit size: 30.8GB
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 184 Uptime: 27 min Memory: 562.0/7756.7MB
           Init: SysVinit runlevel: 5 Gcc sys: N/A
           Client: Shell (bash 4.4.181) inxi: 2.3.56 
#

rockedge · #556 Post by **rockedge** » Sat 24 Mar 2018, 15:09

I am running BionicPup delta 6 with Apache2 or Hiawatha 10.8 PHP 7.2.3 MariaDB to test PHP 7.2 compatibility in ZoneMinder 1.30.4 and more importantly the development versions 1.31.+

I am using the ArtfulPup 17.11 devx... is there a BionicPup devx? or does one exist?

Marv · #557 Post by **Marv** » Sat 24 Mar 2018, 15:50

Still chasing the fallback to the software direct rendering on the i5 hardware running ubbpup. On the i5 hardware in ArtfulPup the loading looks like:

Code: Select all

# LC_ALL=C LIBGL_DEBUG=verbose glxinfo | grep DRI
libGL: Can't open configuration file /root/.drirc: No such file or directory.
libGL: pci id for fd 4: 8086:0126, driver i965
libGL: OpenDriver: trying /usr/lib/i386-linux-gnu/dri/tls/i965_dri.so
libGL: OpenDriver: trying /usr/lib/i386-linux-gnu/dri/i965_dri.so
libGL: Can't open configuration file /root/.drirc: No such file or directory.
libGL: Using DRI3 for screen 0
libGL: Can't open configuration file /root/.drirc: No such file or directory.
    Device: Mesa DRI Intel(R) Sandybridge Mobile x86/MMX/SSE2 (0x126)
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile x86/MMX/SSE2
libGL: Can't open configuration file /root/.drirc: No such file or directory.
libGL: Can't open configuration file /root/.drirc: No such file or directory.

In Bionic Beaver it is:

Code: Select all

# LC_ALL=C LIBGL_DEBUG=verbose glxinfo | grep DRI
libGL: screen 0 does not appear to be DRI2 capable
libGL: OpenDriver: trying /usr/lib/i386-linux-gnu/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib/i386-linux-gnu/dri/swrast_dri.so
libGL: Can't open configuration file /root/.drirc: No such file or directory.
libGL: Can't open configuration file /root/.drirc: No such file or directory.

Could it be a libGL problem also? Identical hardware in the above runs of course.
Edit: Later, ubb+7 fails in exactly the same way as above on Bay Trail (intel J1900 CPU & intel i9xx video) hardware.

Billtoo · #558 Post by **Billtoo** » Sat 24 Mar 2018, 17:13

I burned my ArtfulPup iso remaster to a DVD+RW to use with my Acer
laptop:
System: Host: puppypc23787 Kernel: 4.9.59-lxpup-32-pae i686 bits: 32 Desktop: JWM 2.3.7
Distro: ArtfulPup 17.11
Machine: Device: laptop System: Acer product: Aspire 7740 v: Rev serial: LXPNX02012004098672000
Mobo: Acer model: Aspire 7740 v: Rev serial: LXPNX02012004098672000
BIOS: Phoenix v: V1.15 date: 12/25/2009
Battery BAT0: charge: 48.8 Wh 100.0% condition: 48.8/48.8 Wh (100%)
CPU: Dual core Intel Core i5 M 430 (-HT-MCP-) speed/max: 1199/2267 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Park [Mobility Radeon HD 5430/5450/5470]
Display Server: X.Org 1.19.5 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
Resolution: 1600x900@60.00hz
OpenGL: renderer: AMD CEDAR (DRM 2.49.0 / 4.9.59-lxpup-32-pae, LLVM 5.0.0) version: 3.3 Mesa 17.2.8
Network: Card-1: Broadcom Limited NetLink BCM57780 Gigabit Ethernet PCIe driver: tg3
Card-2: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) driver: ath9k
Drives: HDD Total Size: NA (-)
Weather: Conditions: 30 F (-1 C) - Clear Time: March 24, 12:58 PM EDT
Info: Processes: 183 Uptime: 14 min Memory: 132.8/3902.7MB Client: Shell (bash) inxi: 2.3.37

I've done 2 saves to the dvd so far, setting up kodi,smtube,and
palemoon then saving.

It's working well but unless it's changed I think 2 saves is the limit.

davids45 · #559 Post by **davids45** » Sat 24 Mar 2018, 22:08

G'day peebee,

Bionic+7 still has poor startup for my desktop.

The problems are in the eventmanager version in /usr/sbin.
I don't think this is a Bionic/Ubuntu problem.

At first start (screenshot), my drive icons run off the bottom of the monitor as I have too many for two columns.

Trying to reset these to run across the bottom of the screen fails because the Drive Icon option in Desktop Settings (i.e. eventmanager) is broken - plus its 'OK' button does not work (screenshot).

By 'restarting X', this tries to implement the re-postioning by eventmanager but fails again. Only the drive b (sdb) icons move - sda partitions stay in a left-side column (screenshot).

From past failures in the BionicPups, I can fix this by deleting the present eventmanager in /usr/sbin/ and replacing it with a Xenial version (screenshot).

BK's script of eventmanager has changed from Xenial to Bionic - I don't know if this is a woof problem or is just in these early BionicPup alphas.

I also see the 'Open file' window clutter problem (displaying unusable 'Places' in the 'Open file' window's left panel) which I fix by deleting everything in /etc/fstab.

After doing these fixes, I have set up Bionic+7 as I like to have a Pup on this computer, although with all my (.pet) applications, the pinboard stops loading too soon so I need to re-start the pinboard after it has apparently done everything, but hasn't (screenshots).

I'll do a remaster as a last adjustment so BionicPup+7 does everything I need/want.

"Is it just me...?"
As a cross-check, I'd appreciate someone else on the Forum with Bionic trying a drive icon re-alignment in BionicPup Desktop Settings (change from left to bottom display), particularly if a second drive (ie sdb as well as sda) is involved - and if their 'OK' button does anything.
Maybe I should check my original Bionic iso download since eventmanager has been failing in that and all subsequent updates?

Thanks,

David S.

Marv · #560 Post by **Marv** » Sat 24 Mar 2018, 23:12

davids45 wrote: As a cross-check, I'd appreciate someone else on the Forum with Bionic trying a drive icon re-alignment in BionicPup Desktop Settings (change from left to bottom display), particularly if a second drive (ie sdb as well as sda) is involved - and if their 'OK' button does anything.

OK button does nothing here also. I only have 2 to 4 drives as a rule so I left them in the default location til now. I just used the event manager to try to relocate them both to bottom or right and in both cases the OK button did nothing. Not a pristine boot but I haven't mucked about with the desktop as I'm much more familiar with lxde and XFCE4 and I have a tendency to break JWM if I venture too far.

(old)Puppy Linux Discussion Forum

(old)Puppy Linux Discussion Forum

ArtfulPup (& Upup-Bionic-Beaver-RC)

ArtfulPup (& Upup-Bionic-Beaver-Alpha)

Question about obsolate seasonal ubuntu versions

Artfulpup Hungary

ArtfulPup (& Upup-Bionic-Beaver-Alpha)

bluetooth

ArtfulPup (& Upup-Bionic-Beaver-Alpha)

UBB-Pup- 18.03+6

ArtfulPup (& Upup-Bionic-Beaver-Alpha)

Eventmanager still broken for moving drive icons