FluxPup 1.6.1 PAE

Message

117woofer · #16 Post by **117woofer** » Sat 20 Aug 2016, 11:24

I'm sorry, I am not good at English.

My sda1 partition is ext4.
When I mouse over the partition icon on the desktop, it lists it as ext3.

# parted -l
Model: ATA ST3250312AS (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number Start End Size Type File system Flags
1 1049kB 84.0GB 84.0GB primary ext4 boot

# modprobe ext4
# dmesg | tail
[ 1188.366975] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)

oldyeller · #17 Post by **oldyeller** » Thu 25 Aug 2016, 06:59

I have checked out the ext4 and there is a problem, I am checking on a solution for it now. Hang in there and we will get htis fixed.

Thanks

Sage · #18 Post by **Sage** » Fri 26 Aug 2016, 06:09

Very likeable, very fast, quite compact and comprehensive. Managed to shift the default desktop items to my preferred positions and sizes. I prefer my menu items only in lowerlhs menu, but would settle for them along the baseline if I could incorporate them into the task bar, or, at least not have them overlap ditto i.e. have them free to position like the unlock function in Xfce.
Any further advice, please?

davids45 · #19 Post by **davids45** » Sat 27 Aug 2016, 01:37

G'day oldyeller,

I've just tried your latest FluxPup and find it runs well for pretty much everything I've tried it with so far.

I modified pwidgets to my current preferences (screenshot).

Most of my boot-loaded sfs run their packages as expected.

I'm posting from slimjet (precise-sfs) but had to start this in the terminal rather than clicking the desktop icon (which uses the slimjet.desktop file). I had had the NaCl helper problem with the first-tried slimjet-tahr sfs

which didn't run at all. Rebooting with a slimjet-precise sfs gave me a terminal-working slimjet - despite its several error messages on the terminal before it opens up. Probably need to look at the slimjet.desktop text file to have slimjet run with the desired desktop-icon-click.

Otherwise (and slimjet is my problem, not your problem), very nice.

Thanks,

David S.

slavvo67 · #20 Post by **slavvo67** » Sat 27 Aug 2016, 05:18

OldYeller, Welcome Back!!!

I finally took a few minutes to look at the new FluxPup. Thrilled to have a new version!

One thing I noticed is that after using Simple Network Setup, you need to right click, network, firewall setup. Correct me, but I think without doing that you're left wide open without firewall.

I've practically given up CD installs. These things never degrade back into the Earth but still go with the old CD-RW is always a good option here.

I'll provide some more input as I test.

Kind regards,

Slavvo67

oldyeller · #21 Post by **oldyeller** » Sun 28 Aug 2016, 18:03

Hello Everyone,

I am working with 01micko on the ext4 problem.

@Sage: As far as I know there is no way to put things in the task bar.

@slavvo67: I could have the firewall open up right after people setup their networking which may help them know that there is firewall protection .

@davids45: I really like what u did to pwidgets looks nice.

davids45 · #22 Post by **davids45** » Tue 30 Aug 2016, 00:26

G'day oldyeller,

I cannot take credit for the really good looking widgets.

I've crudely adapted them from forum member Moat's ChloePup which has a variety of modified widgets - Moat had also improved the original yahoo-based weather pwidget to include forecasts and extra details - for then to have yahoo make their weather unusable

. He then coded to call in the better accuweather site's data to get the now quite large but very impressive weather forecast widget.

Here's a link to his ChloePup if you're wanting to try some of his work:

http://www.murga-linux.com/puppy/viewto ... 869#873319

David S.

ozsouth · #23 Post by **ozsouth** » Wed 31 Aug 2016, 05:17

I like this puplet. One issue - the installed wl.ko is for older broadcom chips & when I tried to compile a newer driver, kernel sources missing (devx alone insufficient). Barry's link to the sources now '404' error. Anyone still have kernel sources for 3.9.11 pae?

ally · #24 Post by **ally** » Wed 31 Aug 2016, 09:16

http://archive.org/details/Puppy_Linux_Kernels

ally · #25 Post by **ally** » Wed 31 Aug 2016, 09:16

http://archive.org/details/Puppy_Linux_Kernels

(ooopppsss)

ozsouth · #26 Post by **ozsouth** » Wed 31 Aug 2016, 09:45

Thanks for that Ally - Mission accomplished! My untidy (but usable) module found via
http://murga-linux.com/puppy/viewtopic. ... 110#921110

ally · #27 Post by **ally** » Wed 31 Aug 2016, 10:03

pleasure

foxpup · #28 Post by **foxpup** » Thu 01 Sep 2016, 21:39

I tried this fluxpup, but could not get past loading modules.
Is this a 64bit version?
My cpu is amd athlon palomino.

oldyeller · #29 Post by **oldyeller** » Sat 03 Sep 2016, 04:27

foxpup wrote:I tried this fluxpup, but could not get past loading modules.
Is this a 64bit version?
My cpu is amd athlon palomino.

No this is a 32bit

Pelo · #30 Post by **Pelo** » Sat 03 Sep 2016, 17:46

Here we Go.. Iso dowloading..
Firefox, the broswer : cache reduced to 35mb i/o 350. Check when i type unticked.
Wireless with Frisbee sans soucis.
pAVrecord version 9.0.0 will be used for testing new methods of screencasting by mcewanw
fluxpupsave-decoration.2fs: 128 M settigs zell lquched qs sqvec zhen rebootedm book;qrksm Keyboard fr non

PuppyPin in Choices>ROX Filer solves thumbnails bug

To choose a backdrop image, right-click on any desktop icon, and there is an
entry labeled "Backdrop..." zidgets . i like zidget of 1.6.0m Oldyeller does not<"
xorgconf modified to get french keyboard available (azertyuiop one)

Puppies upup have a bug about keyboards. If you do a puplet from upup, consider you have to improve your version to get foreign keymaps working.. For your Fluxpup passengers, please do it.
Puppy Package Manager in Action. Fluxpup and Simple Screen Recorder produce videos where text can be read on the screen. HQ ! Cliquer sur le blue.

ozsouth · #31 Post by **ozsouth** » Wed 14 Sep 2016, 06:28

My laptop has a 'tilt bar' type touchpad, making right-clicks (a requirement to get the Fluxbox Menu) difficult.
Solution: Config button on the toolbar allows you to add apps, including the Menu. Command is:
fluxbox-remote RootMenu

Pelo · #32 Post by **Pelo** » Fri 14 Oct 2016, 08:24

merci ozout. (from Virtualbox, testing fluxpup).
Thumbnails well appeared on fluxpup running in Virtualbox. Strange why there is a bug when installed.
Video for training myself uploaded Youtubeclick the blue

KP3FT · #33 Post by **KP3FT** » Sun 04 Dec 2016, 15:52

I think this is my new favorite Pup. Everything works on my Core2 HP NC6400. It's installed on the harddrive as full-install, and also on a USB thumbdrive. Saving changes works fine on the USB. Only thing I noticed was that it won't mount my other ext4 partitions, but it looks like that's already being looked into.

Also, happy to see that FluxPup doesn't keep one of the cpu cores running at 33%. Three other Pups with newer kernels work fine except that the Linux "kworker" bug shows up on my particular machine, keeping a core at a steady 33% with no other processes running.

oldyeller · #34 Post by **oldyeller** » Wed 28 Dec 2016, 02:51

Hello Everyone,

I have just up loaded a new iso. So the ext4 should now be fixed thanks to 01micko.

So test and let me know

Thanks,

117woofer · #35 Post by **117woofer** » Wed 28 Dec 2016, 16:24

FluxPup-1.6.1 recognized ext4.

Thank you ever so much oldyeller and 01micko.

(old)Puppy Linux Discussion Forum

(old)Puppy Linux Discussion Forum

FluxPup 1.6.1 PAE

Frugal FluxPup-1.6.1 Precise

pwidgets improvements

64bit?

Re: 64bit?

Here we Go.. Iso dowloading..

merci ozout. (from Virtualbox, testing fluxpup)