OVPrecise 5.8 Final + Retro
OVPrecise 5.8 Final + Retro
Hello Everyone,
OVPrecise 5.8 done with woof-CE. It is 158mb pae 3.9.11 xz comp.
Here is OVPrecise-retro 5.8 It is built with gzip, 209mb linux_kernel-3.2.48-nopae-i486-f2fs-aufs-smp-isa-precise
You can get it them along with the devxs http://smokey01.com/Oldyeller/ovprecise/
I also added ovprecise repo as well wtih a lot more stuff I do believe and one day will start to compile somethings too.
Added back in ADRV support only. Fully tested and work with a menu in setup to run script to build the adrive.
OVPrecise-retro:
Has opera, It should be the same as the Barryk did I hope
OVPrecise:
Whats been fixed in Final:
suspend
Added to rc1:
suspend
Whats been added and updated:
desksetup-0.7
getflash-1.3
get_libreoffice
LazY-FReD
pbackup-3.1.9-1
pburn-4.3.2
pmusic-4.2.0-1
PupClockset-2.2
PupControl-2.4.1
quickpet_precise
Since I don't have a hdd could someone test the suspend and let me know? Thanks
Have fun
OVPrecise 5.8 done with woof-CE. It is 158mb pae 3.9.11 xz comp.
Here is OVPrecise-retro 5.8 It is built with gzip, 209mb linux_kernel-3.2.48-nopae-i486-f2fs-aufs-smp-isa-precise
You can get it them along with the devxs http://smokey01.com/Oldyeller/ovprecise/
I also added ovprecise repo as well wtih a lot more stuff I do believe and one day will start to compile somethings too.
Added back in ADRV support only. Fully tested and work with a menu in setup to run script to build the adrive.
OVPrecise-retro:
Has opera, It should be the same as the Barryk did I hope
OVPrecise:
Whats been fixed in Final:
suspend
Added to rc1:
suspend
Whats been added and updated:
desksetup-0.7
getflash-1.3
get_libreoffice
LazY-FReD
pbackup-3.1.9-1
pburn-4.3.2
pmusic-4.2.0-1
PupClockset-2.2
PupControl-2.4.1
quickpet_precise
Since I don't have a hdd could someone test the suspend and let me know? Thanks
Have fun
Last edited by oldyeller on Sat 25 Jun 2016, 09:45, edited 14 times in total.
Re: OVPrecise 5.7.10 ALPHA 1
You need to add the /mnt/tmpfs3 folder in your initrd treeoldyeller wrote: Added ADRV and YDRV support the YDRV still needs to be fixed when added it causes a kernel panic.
== [url=http://www.catb.org/esr/faqs/smart-questions.html]Here is how to solve your[/url] [url=https://www.chiark.greenend.org.uk/~sgtatham/bugs.html]Linux problems fast[/url] ==
Re: OVPrecise 5.7.10 ALPHA 1
Hi mavrothal I have it in there. just looked any thing else?mavrothal wrote:You need to add the /mnt/tmpfs3 folder in your initrd treeoldyeller wrote: Added ADRV and YDRV support the YDRV still needs to be fixed when added it causes a kernel panic.
Re: OVPrecise 5.7.10 ALPHA 1
No you do not. At least not in the iso I downloaded and looked in the initrd.oldyeller wrote:Hi mavrothal I have it in there.mavrothal wrote:You need to add the /mnt/tmpfs3 folder in your initrd treeoldyeller wrote: Added ADRV and YDRV support the YDRV still needs to be fixed when added it causes a kernel panic.
Code: Select all
$ ls mnt/
data dev_ro1 dev_save tmpfs
data2 dev_ro2 swap tmpfs2
== [url=http://www.catb.org/esr/faqs/smart-questions.html]Here is how to solve your[/url] [url=https://www.chiark.greenend.org.uk/~sgtatham/bugs.html]Linux problems fast[/url] ==
1610-13 say'soldyeller wrote:This might sound dump, but what line is that can't seem to find this in the init.
Code: Select all
mount -t tmpfs -o size=${SIZEZK}k tmpfs /mnt/tmpfs3
cp -af ${MNT_YFILE}${YFILE} /mnt/tmpfs3/
sync
losetup /dev/loop3 /mnt/tmpfs3/${YBASENAME}
The original woof patch also mentions
Just gunzip/cpio your initrd, add the tmpfs3 folder in the mnt folder in your initrdfs, cpio/gzip the initrdfs and check to see if this solves the issue.Only in Woof2-ADRV_YDRV//woof-code/boot/initrd-tree0/mnt: tmpfs3
== [url=http://www.catb.org/esr/faqs/smart-questions.html]Here is how to solve your[/url] [url=https://www.chiark.greenend.org.uk/~sgtatham/bugs.html]Linux problems fast[/url] ==
I found it and fixed it in woof-CE so the next build will have it fixed, I did this 3 hours ago so thanks for your reply. Just really tired.mavrothal wrote:1610-13 say'soldyeller wrote:This might sound dump, but what line is that can't seem to find this in the init.but there is no /mnt/tmpfs3 folder (mount point) in your initrdfs to mount ydrv, thus the panic.Code: Select all
mount -t tmpfs -o size=${SIZEZK}k tmpfs /mnt/tmpfs3 cp -af ${MNT_YFILE}${YFILE} /mnt/tmpfs3/ sync losetup /dev/loop3 /mnt/tmpfs3/${YBASENAME}
The original woof patch also mentionsJust gunzip/cpio your initrd, add the tmpfs3 folder in the mnt folder in your initrdfs, cpio/gzip the initrdfs and check to see if this solves the issue.Only in Woof2-ADRV_YDRV//woof-code/boot/initrd-tree0/mnt: tmpfs3
Cheers
quick report
installed on USB stick with Universal USB Installer.
Used it to watch video and surf the web for about an hour. Randomly tested some apps. Everything seems to work well.
Used it to watch video and surf the web for about an hour. Randomly tested some apps. Everything seems to work well.
OVPrecise 5.7.20 ALPHA 2
Manual frugal install to a 16gb SDHC card.
video-info-glx 1.5.3 Sat 23 Nov 2013 on OVPrecise Puppy 5.7.20 Linux 3.9.11 i686
2.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
oem: Intel(R)Ironlake Desktop Graphics Chipset Accelerated VGA BIOS
product: Intel(R)Ironlake Desktop Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.11.3
dimensions: 1440x900 pixels (380x238 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) Ironlake Desktop x86/MMX/SSE2
OpenGL version string: 2.1 Mesa 8.0.4
Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz
Core 0: @1200 1: @1200 2: @1200 3: @1200 MHz
Memory 6087MB (114MB used)
Linksys WUSB54GC v1 802.11g Adapter [Ralink RT73]
Everything is good so far, I installed VLC and Lxterminal in ppm.
Also downloaded and installed the latest flash plugin from adobe.com.
video-info-glx 1.5.3 Sat 23 Nov 2013 on OVPrecise Puppy 5.7.20 Linux 3.9.11 i686
2.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
oem: Intel(R)Ironlake Desktop Graphics Chipset Accelerated VGA BIOS
product: Intel(R)Ironlake Desktop Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.11.3
dimensions: 1440x900 pixels (380x238 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) Ironlake Desktop x86/MMX/SSE2
OpenGL version string: 2.1 Mesa 8.0.4
Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz
Core 0: @1200 1: @1200 2: @1200 3: @1200 MHz
Memory 6087MB (114MB used)
Linksys WUSB54GC v1 802.11g Adapter [Ralink RT73]
Everything is good so far, I installed VLC and Lxterminal in ppm.
Also downloaded and installed the latest flash plugin from adobe.com.
- Attachments
-
- screenshot2.jpg
- (66.23 KiB) Downloaded 4426 times
-
- screenshot.jpg
- (59.98 KiB) Downloaded 4381 times
Last edited by Billtoo on Sat 23 Nov 2013, 15:18, edited 1 time in total.
Manual frugal install to ext3 partition.Everything looking good so far except......
when rebooting the first time to make my savefile I got a big red error message box about the NTFS-3g driver. Since the savefile is on ext3 no problem saving ...... believe it was reported in Barry K's Precise thread too.
Otherwise, everything else appears to be working well.
# report-video
VIDEO REPORT: OVPrecise Puppy, version 5.7.20
Chip description:
VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): intel
Loaded modules: dbe dri dri2 extmod fb glx kbd mouse record
Actual rendering on monitor:
Resolution: 1024x768 pixels (270x203 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
#
-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 2585MB (174MB used)
Machine Type : Physical machine
Operating System : OVPrecise Puppy - 5.7.20
User Name : root (root)
Date/Time : Sat 23 Nov 2013 01:49:56 AM CST
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : ICH4 - Intel ICH5
when rebooting the first time to make my savefile I got a big red error message box about the NTFS-3g driver. Since the savefile is on ext3 no problem saving ...... believe it was reported in Barry K's Precise thread too.
Otherwise, everything else appears to be working well.
# report-video
VIDEO REPORT: OVPrecise Puppy, version 5.7.20
Chip description:
VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): intel
Loaded modules: dbe dri dri2 extmod fb glx kbd mouse record
Actual rendering on monitor:
Resolution: 1024x768 pixels (270x203 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
#
-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 2585MB (174MB used)
Machine Type : Physical machine
Operating System : OVPrecise Puppy - 5.7.20
User Name : root (root)
Date/Time : Sat 23 Nov 2013 01:49:56 AM CST
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : ICH4 - Intel ICH5
ADRV=is a drive that jemimah did for Saluki that one can put applications in and than put this adrive into the folder at /mnt/home then do a reboot and puppy will load this as part of the system. This does not affect how many sfs you can load at boot.Ted Dog wrote:what is ADRV and the other 4 letter term in this thread?
I hope this is clear enough to understand. rg66 could do a better job on what this is and what it does.
Cheers
It should work as long as it is support in the puppy you are using. As this one will be when it get to the release edition. I can't test this since I don't have a cd-rom in my pc.Ted Dog wrote:does it work in multisession dvds? I am proposing a rollup change to reduce loading times for us using multisession. a fully compressed sfs file option on save.
Cheers
OVPrecise 5.7.20 ALPHA 2
I copied my manual frugal install to another 16gb SDHC card to save
some time adding packages etc. and ran grub4dos on the new card.
video-info-glx 1.5.3 Sat 23 Nov 2013 on OVPrecise Puppy 5.7.20 Linux 3.9.11 i686
0.0 VGA compatible controller: NVIDIA Corporation GF110 [GeForce GTX 560 Ti OEM] (rev a1)
oem: NVIDIA
product: GF110 Board - 12630002 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1920x1080 pixels (513x292 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTX 560 Ti/PCIe/SSE2
OpenGL version string: 4.2.0 NVIDIA 304.116
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
Core 0: @1600 1: @1600 2: @1600 3: @1600 4: @1600 5: @1600 6: @1600 7: @1600 MHz
Memory 16613MB (140MB used)
Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe
I added Ratpoison as a window manager and it's working pretty well but
I still switch back to jwm sometimes.
some time adding packages etc. and ran grub4dos on the new card.
video-info-glx 1.5.3 Sat 23 Nov 2013 on OVPrecise Puppy 5.7.20 Linux 3.9.11 i686
0.0 VGA compatible controller: NVIDIA Corporation GF110 [GeForce GTX 560 Ti OEM] (rev a1)
oem: NVIDIA
product: GF110 Board - 12630002 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1920x1080 pixels (513x292 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTX 560 Ti/PCIe/SSE2
OpenGL version string: 4.2.0 NVIDIA 304.116
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
Core 0: @1600 1: @1600 2: @1600 3: @1600 4: @1600 5: @1600 6: @1600 7: @1600 MHz
Memory 16613MB (140MB used)
Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe
I added Ratpoison as a window manager and it's working pretty well but
I still switch back to jwm sometimes.
- Attachments
-
- screenshot3.jpg
- (61.45 KiB) Downloaded 1098 times
quick test
Installed to usb stick with Universal USB Installer.
Installed Xine from PPM, pupsaveconfig, right click utils, gtk youtube viewer and a few other things. All seems to work fine.
Installed Xine from PPM, pupsaveconfig, right click utils, gtk youtube viewer and a few other things. All seems to work fine.
OVPrecise 5.7.30 BETA 1
I did a manual frugal install to a 16gb SDHC card (now dual booting with 5720)
I booted up and set up 5730, used the boot manager to load the devx
and rebooted creating save file.
I made a few pets and then put them on the main hard drive, deleted my
save file and rebooted starting fresh.
Once the new save file was setup I ran the adrive script(used the main
hard drive for adrive directories).
Once the adrv_ovprecise_5.7.30.sfs was created I copied it to
/mnt/home and loaded it with the bootmanager.
It seems to have worked perfectly, I've never used one before.
The getflash utility is now working.
I booted up and set up 5730, used the boot manager to load the devx
and rebooted creating save file.
I made a few pets and then put them on the main hard drive, deleted my
save file and rebooted starting fresh.
Once the new save file was setup I ran the adrive script(used the main
hard drive for adrive directories).
Once the adrv_ovprecise_5.7.30.sfs was created I copied it to
/mnt/home and loaded it with the bootmanager.
It seems to have worked perfectly, I've never used one before.
The getflash utility is now working.
- Attachments
-
- screenshot.jpg
- (66.66 KiB) Downloaded 1009 times