Xenialpup64 CE 7.5 / 25 Nov 2017
Other problem : pmcputemp doesnt work with my AMD Athlon Dual-Core Processor
Other problem : with grub4dos for full install , the generated menu was not correct, so I had to manually change it.
Other problem : with grub4dos for full install , the generated menu was not correct, so I had to manually change it.
Last edited by linuxcbon on Sun 03 Feb 2019, 20:26, edited 1 time in total.
@HiDeHo,
Run PPM, search arandr, install it, launch arandr in menu System or in console.
With your mouse place the picture of the screen of the laptop to the the right or the left of the VGA monitor.
Apply, Save.
If the whole display is correct:
Launch JWMdesk, Tray1, Geometry: Center if your laptop is on the right of the VGA monitor.
If not, try left or right.
Edit: is this what you want ? The monitor is on the left, laptop on the right.
Maybe try this:I have an external monitor plugged in. the panel is only displaying on the 2nd monitor. i don't want this. what i do want is to have the panel displaying on the main laptop screen only
Run PPM, search arandr, install it, launch arandr in menu System or in console.
With your mouse place the picture of the screen of the laptop to the the right or the left of the VGA monitor.
Apply, Save.
If the whole display is correct:
Launch JWMdesk, Tray1, Geometry: Center if your laptop is on the right of the VGA monitor.
If not, try left or right.
Edit: is this what you want ? The monitor is on the left, laptop on the right.
- Attachments
-
- capture5274.png
- (172.13 KiB) Downloaded 261 times
Try using this temp display.linuxcbon wrote:Other problem : pmcputemp doesnt work with my AMD Athlon Dual-Core Processor
http://murga-linux.com/puppy/viewtopic.php?t=114502
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
HP envy 17 notebook cpu intel I7-2630QM @ 2Ghz X-64bit RAM 8GB 1920*1080 32bit depth
All downloads are from NLUUG & md5 sum checked before burning
Boot from live CD & no pup-save files .. fresh/new run
Tried Xenialpup 7.5 64bit / also the 32bit version
Also tried Tahrpup 64 diff versions
Symtomes : on Xenial-64bit loads both sfs files .. Done
updating network stuff optical... Done
Loading kernel modules .. -> PC switches OFF
- Xenial 32bit .. loads sfs .. done
loading kernel modules .. just see msg (after a few tries)then laptop switches off
- Tahrpup64 2~3 diff versions same thing .. No full boot, laptop switches off
- Tried last Fatdog 64 , needed to run xorgwizard to get X .. vga Intel driver
got to X & Inet ok :
but it brutally shuts down this laptop on certain benchmark tests
I can confirm the burns were sucessfull as tried each same boot cd on 2 diff laptops :
an older acer travelmate 2300 32 bit, and a 64bit Dell laptop both booted to X
One that worked out of the box on this laptop was Xenial64 ver 6.734..
got straight to X .. correct screen res 1920*1080, 2 clicks on Inet ..did all benchmarks no probs
Did not fully test it though.. silly me didn't keep a copy of the iso .. ran out of CD-RW
Any help/feedback welcome.. willing to test .. an old puppy fan
All downloads are from NLUUG & md5 sum checked before burning
Boot from live CD & no pup-save files .. fresh/new run
Tried Xenialpup 7.5 64bit / also the 32bit version
Also tried Tahrpup 64 diff versions
Symtomes : on Xenial-64bit loads both sfs files .. Done
updating network stuff optical... Done
Loading kernel modules .. -> PC switches OFF
- Xenial 32bit .. loads sfs .. done
loading kernel modules .. just see msg (after a few tries)then laptop switches off
- Tahrpup64 2~3 diff versions same thing .. No full boot, laptop switches off
- Tried last Fatdog 64 , needed to run xorgwizard to get X .. vga Intel driver
got to X & Inet ok :
but it brutally shuts down this laptop on certain benchmark tests
I can confirm the burns were sucessfull as tried each same boot cd on 2 diff laptops :
an older acer travelmate 2300 32 bit, and a 64bit Dell laptop both booted to X
One that worked out of the box on this laptop was Xenial64 ver 6.734..
got straight to X .. correct screen res 1920*1080, 2 clicks on Inet ..did all benchmarks no probs
Did not fully test it though.. silly me didn't keep a copy of the iso .. ran out of CD-RW
Any help/feedback welcome.. willing to test .. an old puppy fan
In the computers bios?
Is fast boot disabled?
Secure boot disabled and or legacy boot enabled?
Is fast boot disabled?
Secure boot disabled and or legacy boot enabled?
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Hello Bigpup & the Puppy community, some feedback ..
HP 17 envy 17 intel I7-2630 QM CPU @ 2.00GHz 8Gb ram
The bios is latest/last bios from hp F.1C brand Insyde H2O ver 3.5
this bios is very cut down, reminds me of some custom bioses
it auto-detects all devices & probally updates the escd on power-up, (ESC) to choose devices recognized as bootable
Only usable/useful options are Boot order of detected devices, not much else
tried bionical64 & slacklo64 .. same thing laptop switches off.. maybe 1~2 extra lines of .. done
Sorry in advance if I'm mixing puppy testing distros .. was hoping Xenial64 new version would work on this laptop
below is a cut-down summary from hardinfo fatdog64 running on this laptop, what I thought might be helpfull
HP 17 envy 17 intel I7-2630 QM CPU @ 2.00GHz 8Gb ram
The bios is latest/last bios from hp F.1C brand Insyde H2O ver 3.5
this bios is very cut down, reminds me of some custom bioses
it auto-detects all devices & probally updates the escd on power-up, (ESC) to choose devices recognized as bootable
Only usable/useful options are Boot order of detected devices, not much else
tried bionical64 & slacklo64 .. same thing laptop switches off.. maybe 1~2 extra lines of .. done
Sorry in advance if I'm mixing puppy testing distros .. was hoping Xenial64 new version would work on this laptop
below is a cut-down summary from hardinfo fatdog64 running on this laptop, what I thought might be helpfull
sorry if it was long & hope it's usefull.. a longtime loyal puppy fanComputer
********
Summary
-------
-Computer-
Processor : 8x Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz
Memory : 8118MB (243MB used)
Machine Type : Physical machine
Operating System : Fatdog64 [721]
User Name : root (root)
Date/Time : Fri Feb 8 23:41:01 2019
-Display-
Resolution : 1920x1080 pixels
OpenGL Renderer : Mesa DRI Intel(R) Sandybridge Mobile
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : HDA-Intel - HDA Intel PCH
Audio Adapter : HDA-Intel - HDA ATI HDMI
-Input Devices-
Lid Switch
Power Button
Power Button
AT Translated Set 2 keyboard
HID 0581:0105
HP Wireless hotkeys
PC Speaker
ST LIS3LV02DL Accelerometer
Video Bus
Video Bus
HDA ATI HDMI HDMI/DP,pcm : 3=
HDA Digital PCBeep
HDA Intel PCH Mic
HDA Intel PCH Front Headphone
HDA Intel PCH HDMI/DP,pcm : 3=
HDA Intel PCH HDMI/DP,pcm : 7=
HP ENVY HD Webcam: HP ENVY HD W
HP WMI hotkeys
SynPS/2 Synaptics TouchPad
-Printers-
No printers found
-SCSI Disks-
ATA TOSHIBA MK1059GS
hp BDDVDRW CA30N
Operating System
----------------
-Version-
Kernel : Linux 4.14.12 (x86_64)
Version : #1 SMP Tue Jan 9 23:44:49 AEST 2018
C Library : GNU C Library version 2.19 (stable)
Distribution : Fatdog64 [721]
-Current Session-
Computer Name : fatdog64-7a0
User Name : root (root)
Home Directory : /root
Desktop Environment : Unknown (Window Manager: Openbox)
-Misc-
Uptime : 7 minutes
Load Average : 0.03, 0.07, 0.03
Kernel Modules
--------------
-Loaded Modules-
snd_pcm_oss : PCM OSS emulation for ALSA.
snd_mixer_oss : Mixer OSS emulation for ALSA.
rfcomm : Bluetooth RFCOMM ver 1.11
bnep : Bluetooth BNEP ver 1.3
ipv6 : IPv6 protocol stack for Linux
fan : ACPI Fan Driver
joydev : Joystick device interfaces
coretemp : Intel Core temperature monitor
hp_wmi : HP laptop WMI hotkeys driver
sparse_keymap : Generic support for sparse keymaps
wmi_bmof : WMI embedded Binary MOF driver
intel_rapl : Driver for Intel RAPL (Running Average Power Limit)
x86_pkg_temp_thermal : X86 PKG TEMP Thermal Driver
intel_powerclamp : Package Level C-state Idle Injection for Intel CPUs
kvm
uvcvideo : USB Video Class driver
irqbypass : IRQ bypass manager utility module
videobuf2_vmalloc : vmalloc memory handling routines for videobuf2
videobuf2_memops : common memory handling routines for videobuf2
videobuf2_v4l2 : Driver helper framework for Video for Linux 2
crct10dif_pclmul : T10 DIF CRC calculation accelerated with PCLMULQDQ.
videodev : Device registrar for Video4Linux drivers v2
crc32_pclmul
snd_hda_codec_idt : IDT/Sigmatel HD-audio codec
crc32c_intel : CRC32c (Castagnoli) optimization using Intel Hardware.
snd_hda_codec_generic : Generic HD-audio codec parser
btusb : Generic Bluetooth USB driver ver 0.8
videobuf2_core : Media buffer core framework
btrtl : Bluetooth support for Realtek devices ver 0.1
btbcm : Bluetooth support for Broadcom devices ver 0.1
btintel : Bluetooth support for Intel devices ver 0.1
ghash_clmulni_intel : GHASH Message Digest Algorithm, acclerated by PCLMULQDQ-NI
bluetooth : Bluetooth Core ver 2.22
snd_hda_codec_hdmi : HDMI HD-audio codec
pcbc : PCBC block cipher algorithm
ecdh_generic : ECDH generic algorithm
snd_hda_intel : Intel HDA driver
iwlwifi : Intel(R) Wireless WiFi driver for Linux
snd_hda_codec : HDA codec core
i915 : Intel Graphics
snd_hda_core : HD-audio bus
aesni_intel : Rijndael (AES) Cipher Algorithm, Intel AES-NI instructions optimized
snd_pcm : Midlevel PCM code for ALSA.
crypto_simd
glue_helper
cfg80211 : wireless configuration support
cryptd : Software async crypto daemon
r8169 : RealTek RTL-8169 Gigabit Ethernet driver
hp_accel : Glue between LIS3LV02Dx and HP ACPI BIOS and support for disk protection LED.
psmouse : PS/2 mouse driver
pcspkr : PC Speaker beeper driver
snd_timer : ALSA timer interface
input_leds : Input -> LEDs Bridge
mei_me : Intel(R) Management Engine Interface
lis3lv02d : ST LIS3LV02Dx three-axis digital accelerometer driver
lpc_ich : LPC interface for Intel ICH
mii : MII hardware support library
snd : Advanced Linux Sound Architecture driver for soundcards.
rfkill : RF switch support
i2c_i801 : I801 SMBus driver
soundcore : Core sound module
mei : Intel(R) Management Engine Interface
input_polldev : Generic implementation of a polled input device
wmi : ACPI-WMI Mapping Driver
hp_wireless
ac : ACPI AC Adapter Driver
battery : ACPI Battery Driver
amdkfd : Standalone HSA driver for AMD's GPUs
amd_iommu_v2
radeon : ATI Radeon
hwmon : hardware monitoring sysfs/class support
i2c_algo_bit : I2C-Bus bit-banging algorithm
ttm : TTM memory manager subsystem (for DRM device)
drm_kms_helper : DRM KMS helper
syscopyarea : Generic copyarea (sys-to-sys)
sysfillrect : Generic fill rectangle (sys-to-sys)
sysimgblt : 1-bit/8-bit to 1-32 bit color expansion (sys-to-sys)
fb_sys_fops : Generic file read (fb in system RAM)
drm : DRM shared core routines
Filesystems
-----------
-Mounted File Systems-
devtmpfs /dev 0.00 % (3.7 GiB of 3.7 GiB)
tmpfs /aufs/pup_init 0.12 % (3.9 GiB of 3.9 GiB)
/dev/loop0 /aufs/kernel-modules 100.00 % (0.0 B of 58.8 MiB)
/dev/loop1 /aufs/pup_ro 100.00 % (0.0 B of 298.4 MiB)
tmpfs /aufs/pup_rw 0.17 % (3.9 GiB of 3.9 GiB)
aufs / 0.17 % (3.9 GiB of 3.9 GiB)
tmpfs /dev/shm 0.00 % (3.9 GiB of 3.9 GiB)
tmpfs /tmp 0.02 % (3.9 GiB of 3.9 GiB)
Display
-------
-Display-
Resolution : 1920x1080 pixels
Vendor : The X.Org Foundation
Version : 1.19.5
-Monitors-
Monitor 0 : 1920x1080 pixels
-Extensions-
BIG-REQUESTS
Composite
DAMAGE
DOUBLE-BUFFER
DPMS
DRI2
GLX
Generic Event Extension
MIT-SCREEN-SAVER
MIT-SHM
Present
RANDR
RECORD
RENDER
SGI-GLX
SHAPE
SYNC
X-Resource
XC-MISC
XFIXES
XFree86-DGA
XFree86-VidModeExtension
XINERAMA
XInputExtension
XKEYBOARD
XTEST
XVideo
-OpenGL-
Vendor : Intel Open Source Technology Center
Renderer : Mesa DRI Intel(R) Sandybridge Mobile
Version : 3.0 Mesa 17.2.8
Direct Rendering : Y_es
Processor
---------
-Processors-
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz : 1995.42MHz
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz : 1995.42MHz
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz : 1995.42MHz
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz : 1995.42MHz
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz : 1995.42MHz
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz : 1995.42MHz
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz : 1995.42MHz
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz : 1995.42MHz
PCI Devices
-----------
-PCI Devices-
Host bridge : Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
PCI bridge : Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
VGA compatible controller : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Communication controller : Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
USB controller : Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Audio device : Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
PCI bridge : Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) (prog-if 00 [Normal decode])
PCI bridge : Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) (prog-if 00 [Normal decode])
PCI bridge : Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) (prog-if 00 [Normal decode])
USB controller : Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
ISA bridge : Intel Corporation HM67 Express Chipset Family LPC Controller (rev 04)
RAID bus controller : Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
SMBus : Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
VGA compatible controller : Advanced Micro Devices, Inc. [AMD/ATI] Granville [Radeon HD 6850M/6870M] (prog-if 00 [VGA controller])
Audio device : Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series]
Network controller : Intel Corporation Centrino Advanced-N 6200 (rev 35)
Ethernet controller : Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
USB controller : NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI])
USB Devices
-----------
-USB Devices-
Suyin Corp.
Intel Corp. Integrated Rate Matching Hub
Linux Foundation 2.0 root hub
Linux Foundation 3.0 root hub
Racal Data Group
Linux Foundation 2.0 root hub
Hewlett-Packard Broadcom 2070 Bluetooth Combo
Intel Corp. Integrated Rate Matching Hub
Linux Foundation 2.0 root hub
Sensors
-------
-Temperature-
temp1 (radeon) : 44.00°C
temp1 (coretemp) : 54.00°C
temp2 (coretemp) : 54.00°C
temp3 (coretemp) : 44.00°C
temp4 (coretemp) : 42.00°C
temp5 (coretemp) : 40.00°C
-ACPI Thermal Zone (sysfs)-
thermal_zone1 : 54.00°C
thermal_zone0 : 46.00°C
Input Devices
-------------
-Input Devices-
Lid Switch
Power Button
Power Button
AT Translated Set 2 keyboard
HID 0581:0105
HP Wireless hotkeys
PC Speaker
ST LIS3LV02DL Accelerometer
Video Bus
Video Bus
HDA ATI HDMI HDMI/DP,pcm : 3=
HDA Digital PCBeep
HDA Intel PCH Mic
HDA Intel PCH Front Headphone
HDA Intel PCH HDMI/DP,pcm : 3=
HDA Intel PCH HDMI/DP,pcm : 7=
HP ENVY HD Webcam: HP ENVY HD W
HP WMI hotkeys
SynPS/2 Synaptics TouchPad
DMI
---
-BIOS-
Date : 10/31/2012
Vendor : Hewlett-Packard (www.hp.com)
Version : F.1C
-Board-
Name : 159B
Vendor : Hewlett-Packard (www.hp.com)
Resources
---------
-I/O Ports-
<tt>0000-0cf7 </tt> : PCI Bus 0000:00
<tt> 0000-001f </tt> : dma1
<tt> 0020-0021 </tt> : pic1
<tt> 0040-0043 </tt> : timer0
<tt> 0050-0053 </tt> : timer1
<tt> 0060-0060 </tt> : keyboard
<tt> 0062-0062 </tt> : PNP0C09:00
<tt> 0062-0062 </tt> : EC data
<tt> 0064-0064 </tt> : keyboard
<tt> 0066-0066 </tt> : PNP0C09:00
<tt> 0066-0066 </tt> : EC cmd
<tt> 0070-0077 </tt> : rtc0
<tt> 0080-008f </tt> : dma page reg
<tt> 00a0-00a1 </tt> : pic2
<tt> 00c0-00df </tt> : dma2
<tt> 00f0-00ff </tt> : fpu
<tt> 00f0-00f0 </tt> : PNP0C04:00
<tt> 0380-0387 </tt> : pnp 00:00
<tt> 03c0-03df </tt> : vga+
<tt> 0400-0453 </tt> : pnp 00:00
<tt> 0400-0403 </tt> : ACPI PM1a_EVT_BLK
<tt> 0404-0405 </tt> : ACPI PM1a_CNT_BLK
<tt> 0408-040b </tt> : ACPI PM_TMR
<tt> 0410-0415 </tt> : ACPI CPU throttle
<tt> 0420-042f </tt> : ACPI GPE0_BLK
<tt> 0430-0433 </tt> : iTCO_wdt.0.auto
<tt> 0450-0450 </tt> : ACPI PM2_CNT_BLK
<tt> 0458-047f </tt> : pnp 00:00
<tt> 0460-047f </tt> : iTCO_wdt.0.auto
<tt> 0500-057f </tt> : pnp 00:00
<tt> 0680-069f </tt> : pnp 00:00
<tt>0cf8-0cff </tt> : PCI conf1
<tt>0d00-ffff </tt> : PCI Bus 0000:00
<tt> 1000-100f </tt> : pnp 00:00
<tt> 1010-1013 </tt> : pnp 00:00
<tt> 164e-164f </tt> : pnp 00:00
<tt> 2000-2fff </tt> : PCI Bus 0000:03
<tt> 2000-20ff </tt> : <b><small>PCI</small></b> Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
<tt> 2000-20ff </tt> : <b><small>Module</small></b> RealTek RTL-8169 Gigabit Ethernet driver
<tt> 3000-3fff </tt> : PCI Bus 0000:01
<tt> 3000-30ff </tt> : <b><small>PCI</small></b> Advanced Micro Devices, Inc. [AMD/ATI] Granville [Radeon HD 6850M/6870M] (prog-if 00 [VGA controller])
<tt> 4000-403f </tt> : <b><small>PCI</small></b> Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
<tt> 4040-405f </tt> : <b><small>PCI</small></b> Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
<tt> 4040-405f </tt> : i801_smbus
<tt> 4060-407f </tt> : <b><small>PCI</small></b> Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
<tt> 4060-407f </tt> : ahci
<tt> 4080-4087 </tt> : <b><small>PCI</small></b> Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
<tt> 4080-4087 </tt> : ahci
<tt> 4088-408f </tt> : <b><small>PCI</small></b> Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
<tt> 4088-408f </tt> : ahci
<tt> 4090-4093 </tt> : <b><small>PCI</small></b> Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
<tt> 4090-4093 </tt> : ahci
<tt> 4094-4097 </tt> : <b><small>PCI</small></b> Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
<tt> 4094-4097 </tt> : ahci
<tt> ffff-ffff </tt> : pnp 00:00
-Memory-
<tt>00000000-00000fff </tt> : Reserved
<tt>00001000-000943ff </tt> : System RAM
<tt>00094400-0009ffff </tt> : Reserved
<tt>000a0000-000bffff </tt> : PCI Bus 0000:00
<tt>000c0000-000cf1ff </tt> : Video ROM
<tt>000e0000-000fffff </tt> : Reserved
<tt> 000f0000-000fffff </tt> : System ROM
<tt>00100000-ace3efff </tt> : System RAM
<tt> 01000000-01c02fff </tt> : Kernel code
<tt> 01c03000-022cd43f </tt> : Kernel data
<tt> 023ef000-02499fff </tt> : Kernel bss
<tt>ace3f000-acebefff </tt> : Reserved
<tt>acebf000-acfbefff </tt> : ACPI Non-volatile Storage
<tt>acfbf000-acffefff </tt> : ACPI Tables
<tt>acfff000-acffffff </tt> : System RAM
<tt>ad000000-af9fffff </tt> : Reserved
<tt> ada00000-af9fffff </tt> : Graphics Stolen Memory
<tt>afa00000-feafffff </tt> : PCI Bus 0000:00
<tt> afa00000-afa00fff </tt> : pnp 00:04
<tt> b0000000-bfffffff </tt> : PCI Bus 0000:01
<tt> b0000000-bfffffff </tt> : <b><small>PCI</small></b> Advanced Micro Devices, Inc. [AMD/ATI] Granville [Radeon HD 6850M/6870M] (prog-if 00 [VGA controller])
<tt> c0000000-cfffffff </tt> : <b><small>PCI</small></b> Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
<tt> d0000000-d03fffff </tt> : <b><small>PCI</small></b> Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
<tt> d0400000-d04fffff </tt> : PCI Bus 0000:03
<tt> d0400000-d0403fff </tt> : <b><small>PCI</small></b> Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
<tt> d0400000-d0403fff </tt> : <b><small>Module</small></b> RealTek RTL-8169 Gigabit Ethernet driver
<tt> d0404000-d0404fff </tt> : <b><small>PCI</small></b> Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
<tt> d0404000-d0404fff </tt> : <b><small>Module</small></b> RealTek RTL-8169 Gigabit Ethernet driver
<tt> d0500000-d05fffff </tt> : PCI Bus 0000:04
<tt> d0500000-d0501fff </tt> : <b><small>PCI</small></b> NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI])
<tt> d0500000-d0501fff </tt> : xhci-hcd
<tt> d0600000-d06fffff </tt> : PCI Bus 0000:02
<tt> d0600000-d0601fff </tt> : <b><small>PCI</small></b> Intel Corporation Centrino Advanced-N 6200 (rev 35)
<tt> d0700000-d16fffff </tt> : PCI Bus 0000:01
<tt> d0700000-d071ffff </tt> : <b><small>PCI</small></b> Advanced Micro Devices, Inc. [AMD/ATI] Granville [Radeon HD 6850M/6870M] (prog-if 00 [VGA controller])
<tt> d0720000-d0723fff </tt> : <b><small>PCI</small></b> Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series]
<tt> d0720000-d0723fff </tt> : ICH HD audio
<tt> d0740000-d075ffff </tt> : <b><small>PCI</small></b> Advanced Micro Devices, Inc. [AMD/ATI] Granville [Radeon HD 6850M/6870M] (prog-if 00 [VGA controller])
<tt> d1700000-d1703fff </tt> : <b><small>PCI</small></b> Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
<tt> d1700000-d1703fff </tt> : ICH HD audio
<tt> d1704000-d170400f </tt> : <b><small>PCI</small></b> Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
<tt> d1704000-d170400f </tt> : <b><small>Module</small></b> Intel(R) Management Engine Interface
<tt> d1705000-d17050ff </tt> : <b><small>PCI</small></b> Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
<tt> d1707000-d17077ff </tt> : <b><small>PCI</small></b> Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
<tt> d1707000-d17077ff </tt> : ahci
<tt> d1708000-d17083ff </tt> : <b><small>PCI</small></b> Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
<tt> d1708000-d17083ff </tt> : ehci_hcd
<tt> d1709000-d17093ff </tt> : <b><small>PCI</small></b> Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
<tt> d1709000-d17093ff </tt> : ehci_hcd
<tt> e0000000-efffffff </tt> : PCI MMCONFIG 0000 [bus 00-ff]
<tt> e0000000-efffffff </tt> : Reserved
<tt> e0000000-efffffff </tt> : pnp 00:04
<tt>feb00000-feb03fff </tt> : Reserved
<tt>fec00000-fec00fff </tt> : Reserved
<tt> fec00000-fec003ff </tt> : IOAPIC 0
<tt>fed00000-fed003ff </tt> : HPET 0
<tt> fed00000-fed003ff </tt> : PNP0103:00
<tt>fed10000-fed19fff </tt> : Reserved
<tt> fed10000-fed17fff </tt> : pnp 00:04
<tt> fed18000-fed18fff </tt> : pnp 00:04
<tt> fed19000-fed19fff </tt> : pnp 00:04
<tt>fed1c000-fed1ffff </tt> : Reserved
<tt> fed1c000-fed1ffff </tt> : pnp 00:04
<tt> fed1f410-fed1f414 </tt> : iTCO_wdt.0.auto
<tt>fed20000-fed3ffff </tt> : pnp 00:04
<tt>fed90000-fed93fff </tt> : pnp 00:04
<tt>fee00000-fee00fff </tt> : Local APIC
<tt> fee00000-fee00fff </tt> : Reserved
<tt>ff000000-ffffffff </tt> : INT0800:00
<tt> ffd80000-ffffffff </tt> : Reserved
<tt>100000000-24fdfffff </tt> : System RAM
<tt>24fe00000-24fffffff </tt> : RAM buffer
-DMA-
<tt> 4</tt> : cascade
Would like to install to F2FS flash drive
F2FS file format is designed for flash drives.
You can format the flash drive to F2FS, but the install script will
not install it.
Could you change the script, so you can install Xenialpup64 CE
to a F2FS flash drive?
You can format the flash drive to F2FS, but the install script will
not install it.
Could you change the script, so you can install Xenialpup64 CE
to a F2FS flash drive?
Browsers for Xenialpup64 7,5
Just a link to the misplaced discussion, http://murga-linux.com/puppy/viewtopic. ... 28#1020628
Xenialpu
Hi guys. I have returned to this forum after some time away.
(I used to be Barburo but I had a problem and had to re-register)
I was using Tahtpup 6.0.5.
I decided to give xenial a try. Nice implementation.
One problem with drive icons - not sure if it's been answered but there's 50 + pages to look through and that's a little too much for me.
I use an external USB Connected hard drive with several partitions. My internal drive is also 6 partitions. I use the builtin drive icon manager and display them on the right side vertically.
In Tahrpup there's no problem. In xenial the icons begin to be displayed correctly but it gets confused and overlays multiple dive icons on top of each other.
Has anyone else reported this?
Is there a fix?
( I have applied all of the existing updates through the built-in Pup updater.)
Hardware: older Lenovo think pad
(I used to be Barburo but I had a problem and had to re-register)
I was using Tahtpup 6.0.5.
I decided to give xenial a try. Nice implementation.
One problem with drive icons - not sure if it's been answered but there's 50 + pages to look through and that's a little too much for me.
I use an external USB Connected hard drive with several partitions. My internal drive is also 6 partitions. I use the builtin drive icon manager and display them on the right side vertically.
In Tahrpup there's no problem. In xenial the icons begin to be displayed correctly but it gets confused and overlays multiple dive icons on top of each other.
Has anyone else reported this?
Is there a fix?
( I have applied all of the existing updates through the built-in Pup updater.)
Hardware: older Lenovo think pad
Hiya Barburo - another prodigal Puppyian Welcome back! I have seen the same issues also with Xenialpup 7.04 on my Lenovo T60 - I also like my multiple partitions and drives (ultrabays and advanced dock). When I have it as I like, slot in a usb drive and I've rarely seen the icon placed neatly alongside the others - it is usually overriding from the left position in the lower left corner of the screen, in my setup. I am *soon* to upgrade that OS but will check if I get the same in a more recent 64-bit puppy (I have more "recent" Lenovos to test - T61 and W500 when I have the chance). I will also watch the thread for a solution to the problem...
Search engines for Puppy
[url]http://puppylinux.us/psearch.html[/url]; [url=https://cse.google.com/cse?cx=015995643981050743583%3Aabvzbibgzxo&q=#gsc.tab=0]Google Custom Search[/url]; [url]http://wellminded.net63.net/[/url] others TBA...
[url]http://puppylinux.us/psearch.html[/url]; [url=https://cse.google.com/cse?cx=015995643981050743583%3Aabvzbibgzxo&q=#gsc.tab=0]Google Custom Search[/url]; [url]http://wellminded.net63.net/[/url] others TBA...
- OscarTalks
- Posts: 2196
- Joined: Mon 06 Feb 2012, 00:58
- Location: London, England
I noticed this in Vivaldi 32bitlinuxcbon wrote:It seems that google chrome needs this file :
/etc/machine-id
Can it be added by default to puppies ? For example, automatically generated at each boot ?
(created by # dbus-uuidgen > /etc/machine-id)
This file gets created as /var/lib/dbus/machine-id
Perhaps a symlink /etc/machine-id to this file would work?
It removes the error message although it is not fatal anyway, not sure what it is needed for.
Oscar in England
Try this to fix the drive icons.
Access the Rox-filer>options>Pinboard>Icon grid step
Try changing this setting to one of the other settings.
Usually fine is the best for icons across the bottom of the desktop.
How do the icons look if you put them across the bottom of the desktop?
Access the Rox-filer>options>Pinboard>Icon grid step
Try changing this setting to one of the other settings.
Usually fine is the best for icons across the bottom of the desktop.
How do the icons look if you put them across the bottom of the desktop?
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
placing drive icons
@Puppyt
@SilverB
For good placing of icons it is a combination of
the icon grid step in Pinboard of Rox-Options (rightclick any icon > ROX-Filer > Options > )
and Spacing of Rox Icons in Puppy Event Manager (Menu > System > )
Look here:
http://murga-linux.com/puppy/viewtopic. ... 0&start=36
and here:
https://github.com/puppylinux-woof-CE/w ... ssues/1311
for explanation.
@SilverB
For good placing of icons it is a combination of
the icon grid step in Pinboard of Rox-Options (rightclick any icon > ROX-Filer > Options > )
and Spacing of Rox Icons in Puppy Event Manager (Menu > System > )
Look here:
http://murga-linux.com/puppy/viewtopic. ... 0&start=36
and here:
https://github.com/puppylinux-woof-CE/w ... ssues/1311
for explanation.
Last edited by foxpup on Wed 20 Mar 2019, 21:24, edited 1 time in total.
- pp4mnklinux
- Posts: 375
- Joined: Fri 23 Aug 2013, 06:56
Re: Xenialpu
Hi:
The same happened to me when I modified the disposition of disk icons on screen. When it happens I only need to restart X and they usually appear in the correcto position.
It only happens when working with icons disposition on screen and modify the distance between them a big space instead of little by little.
Hope It helps.
HAVE A NICE DAY
The same happened to me when I modified the disposition of disk icons on screen. When it happens I only need to restart X and they usually appear in the correcto position.
It only happens when working with icons disposition on screen and modify the distance between them a big space instead of little by little.
Hope It helps.
HAVE A NICE DAY
SilverB wrote:Hi guys. I have returned to this forum after some time away.
(I used to be Barburo but I had a problem and had to re-register)
I was using Tahtpup 6.0.5.
I decided to give xenial a try. Nice implementation.
One problem with drive icons - not sure if it's been answered but there's 50 + pages to look through and that's a little too much for me.
I use an external USB Connected hard drive with several partitions. My internal drive is also 6 partitions. I use the builtin drive icon manager and display them on the right side vertically.
In Tahrpup there's no problem. In xenial the icons begin to be displayed correctly but it gets confused and overlays multiple dive icons on top of each other.
Has anyone else reported this?
Is there a fix?
( I have applied all of the existing updates through the built-in Pup updater.)
Hardware: older Lenovo think pad
Distro: xenialpup64 7.5 XXL
Desktop Panel: JWM ~ FbBox 5.0
Desktop Panel: JWM ~ FbBox 5.0
Cheers guys - thank you very much for your help, much appreciated
(Sorry, I've "been away" - and the forum reply notification system is on the blink for me)
(Sorry, I've "been away" - and the forum reply notification system is on the blink for me)
Search engines for Puppy
[url]http://puppylinux.us/psearch.html[/url]; [url=https://cse.google.com/cse?cx=015995643981050743583%3Aabvzbibgzxo&q=#gsc.tab=0]Google Custom Search[/url]; [url]http://wellminded.net63.net/[/url] others TBA...
[url]http://puppylinux.us/psearch.html[/url]; [url=https://cse.google.com/cse?cx=015995643981050743583%3Aabvzbibgzxo&q=#gsc.tab=0]Google Custom Search[/url]; [url]http://wellminded.net63.net/[/url] others TBA...
Hello:
I have tried 02 recent pup (Bionicpup and EasyOS 2.5). Both have issues on my laptop. Bionic is not stable while EasyOS is unable to find any wifi Network ......
Frugal installed Xenialpup64 on my 8 GB USB Drive. Laptop is HP Notebook 2540P. Working Outstanding. Same old feelings of puppy linux 431 when I used first time. Just have some minor issue with chrome and chromium browser. Get stuck for couple of seconds. Dont know the actual reason.
So far, an amazing experience.
Thanks for the wonderful work.
UMAIR
I have tried 02 recent pup (Bionicpup and EasyOS 2.5). Both have issues on my laptop. Bionic is not stable while EasyOS is unable to find any wifi Network ......
Frugal installed Xenialpup64 on my 8 GB USB Drive. Laptop is HP Notebook 2540P. Working Outstanding. Same old feelings of puppy linux 431 when I used first time. Just have some minor issue with chrome and chromium browser. Get stuck for couple of seconds. Dont know the actual reason.
So far, an amazing experience.
Thanks for the wonderful work.
UMAIR
- Attachments
-
- capture9246.png
- (234.48 KiB) Downloaded 744 times