SMplayer 20.6.0 / SMtube 20.6.0

Audio editors, music players, video players, burning software, etc.
Message
Author
User avatar
norgo
Posts: 388
Joined: Fri 13 Nov 2015, 17:19
Location: Germany
Contact:

SMplayer 18.1.0 / SMtube 18.1.0

#106 Post by norgo »

compiled under use of Slacko 630 and shared qt-4.8.6 libs.
smtube-18.1.0-i686.pet
smplayer-18.1.0-i686.pet

Important information ( Slacko 630 )

to be able to play youtube videos under usage of MPlayer you have to update your MPlayer.
MPlayer version becomes checked by SMtube and default MPlayer version 1.1 won't work.
Version 1.2 and 1.3 are working without problems.

tested version 1.2 ( installed via PPM )
tested version 1.3 ( PET build by Sailor Enceladus )


I also tested SMtube-18.1.0 and VLC under Tahrpup 6.0.5
works without problems.

Dependencies:
-qt4
-libqtwebkit
-gstreamer
-gst-plugins-base

backi
Posts: 1922
Joined: Sun 27 Feb 2011, 22:00
Location: GERMANY

#107 Post by backi »

Hi norgo !

Mercy beaucoup once more :D :D :D

User avatar
takenp
Posts: 101
Joined: Wed 05 Aug 2015, 23:27
Location: Moskva
Contact:

#108 Post by takenp »

Could you upload the Mplayer_1.3 to somewhere else plz ? )
Attachments
delme.jpg
(34.91 KiB) Downloaded 1183 times

User avatar
norgo
Posts: 388
Joined: Fri 13 Nov 2015, 17:19
Location: Germany
Contact:

#109 Post by norgo »

takenp wrote:Could you upload the Mplayer_1.3 to somewhere else plz ? )
redirected to @Sailor Enceladus :wink:

User avatar
festus
Posts: 235
Joined: Wed 14 Jan 2015, 19:10

#110 Post by festus »

takenp wrote:Could you upload the Mplayer_1.3 to somewhere else plz ? )
Here is the same player requested, "MPlayer-1.3.0-20160608 slk600.pet"
5.18 MB
MD5: 1773e519a17694ba96f244b8ee6a5c69
https://www.datafilehost.com/d/9dd2fa7f

Hope this helps you.

bliss,
festus

backi
Posts: 1922
Joined: Sun 27 Feb 2011, 22:00
Location: GERMANY

#111 Post by backi »

Many thanks Festus ! :) :)

User avatar
takenp
Posts: 101
Joined: Wed 05 Aug 2015, 23:27
Location: Moskva
Contact:

#112 Post by takenp »

festus wrote: Hope this helps you.

thx alot!

User avatar
norgo
Posts: 388
Joined: Fri 13 Nov 2015, 17:19
Location: Germany
Contact:

SMplayer 18.2.2 - statically

#113 Post by norgo »

SMplayer version 18.2.2 - statically

compiled under use of Slacko 632 / Slacko64 632 and statically qt-4.8.6
smplayer-18.2.2-s-i686.pet
smplayer-18.2.2-s-x86_64.pet

User avatar
norgo
Posts: 388
Joined: Fri 13 Nov 2015, 17:19
Location: Germany
Contact:

SMplayer 18.3.0

#114 Post by norgo »

SMplayer version 18.3.0

compiled under use of Slacko 700 RC3 / Slacko64 700 RC3 and shared qt-5.6.1 libs.
smplayer-18.3.0-qt5-i686.pet
smplayer-18.3.0-qt5-x86_64.pet

compiled under use of Slacko 630 and shared qt-4.8.6 libs.
smplayer-18.3.0-i686.pet

backi
Posts: 1922
Joined: Sun 27 Feb 2011, 22:00
Location: GERMANY

#115 Post by backi »

Hi Norgo !

:) Fantastique :)

User avatar
Mike Walsh
Posts: 6351
Joined: Sat 28 Jun 2014, 12:42
Location: King's Lynn, UK.

#116 Post by Mike Walsh »

Hallo, norgo.

A question, if I may? What would be the newest version of SMTube that would work in Slacko 570?

Also, what's the reason for the "Error; Cannot connect to the server" readout at start-up? I'm currently using version 14.9.0, compiled a few years ago by scabz...


Mike. :wink:

User avatar
norgo
Posts: 388
Joined: Fri 13 Nov 2015, 17:19
Location: Germany
Contact:

#117 Post by norgo »

Independent of version of operating system you will need the latest version of SMtube ( currently 18.1.0 ).
From time to time youtube code is changing and only the latest version of SMtube will be able to play these videos from youtube sources.
Additional you will need at least version 18.1.0 of SMplayer ( 18.3.0 is the most recent version ).
Mplayer version becomes also checked but I can't tell you the exactly revision number of MPlayer out of my head, I'm currently not at home.
This means you will need to update SMtube, SMplayer and Mplayer.

User avatar
norgo
Posts: 388
Joined: Fri 13 Nov 2015, 17:19
Location: Germany
Contact:

SMtube 18.3.0

#118 Post by norgo »

SMtube version 18.3.0

compiled under Slacko 700 RC3 / Slacko64 700 RC3 and shared qt 5.6.1 libs
smtube-18.3.0-qt5-i686.pet
smtube-18.3.0-qt5-x86_64.pet

compiled under Slacko 630 and shared qt 4.8.6 libs
smtube-18.3.0-i686.pet

User avatar
norgo
Posts: 388
Joined: Fri 13 Nov 2015, 17:19
Location: Germany
Contact:

#119 Post by norgo »

Mike Walsh wrote:... What would be the newest version of SMTube that would work in Slacko 570?
@Mike Walsh

Hello Mike,
install smplayer-18.3.0-i686.pet and smtube-18.3.0-i686.pet ( shared qt-4 version ) at your slacko 570 installation.
replace the outdated Mplayer 1.1 version by ... by what ??? Nothing available :-(
You can take this Mplayer version 1.3.0 I compiled for your slacko 570 today ( not extensively tested yet, this is your part :-) )

don't forget to install following needed dependencies:
qt-4
libqtwebkit
ca-certificates
gstreamer
gst-plugins-base

hamoudoudou

SMtube links to precise are now dead..

#120 Post by hamoudoudou »

SMplayer to be updated on XFCE Chloe, SMtube links to precise are now dead..
Last edited by hamoudoudou on Wed 11 Apr 2018, 19:57, edited 2 times in total.

User avatar
Mike Walsh
Posts: 6351
Joined: Sat 28 Jun 2014, 12:42
Location: King's Lynn, UK.

#121 Post by Mike Walsh »

Hallo, Norgo.

Sorry for the late reply; I've only just found this! :oops: Been busy since the week-end.....

Gosh, you didn't need to go to all that effort with MPlayer....but it's very much appreciated, nonetheless. I've downloaded the relevant .pets into their own folder, and time permitting, will see how it all goes. I'll let you know what happens, of course.

-------------------------------------------------------

Questions:- Which particular version of 'ca-certificates' are we talking about here? EDIT:- Never mind; I've installed ca-certs-20161130 from the PPM. Is it 'new' enough? :lol:)

A 'stripped' Qt-4.8.5 is permanently loaded in my 570, so libQtwebkit's already there. Will 4.8.5 do?

As for gstreamer; gstreamer-0.10.36 & gst-plugins-base-0.10.36 are currently installed. Are these sufficient, or do I need the gst-plugins-good-0.10.31 as well?

Sorry for all the questions, but I like to clear this sort of thing up as early as possible! Oh, two more points, while I think of them. Will this MPlayer install over the top of the existing one, or will I need to uninstall the old one first?

(Current version's 1.0.8b; probably the one that came with Slacko, if the truth be known.....)

And I guess the existing SMPlayer and SMTube need removing first, too?


Mike. :wink:

User avatar
norgo
Posts: 388
Joined: Fri 13 Nov 2015, 17:19
Location: Germany
Contact:

#122 Post by norgo »

Hi Mike,

you are welcome.

To overwrite and older version by a newer one is a bad style and not to recommend.
It's possible yes, but to uninstall the old and to install the new version is the better way.

your question about dependencies:

ca-certificates_20161130 okay
Qt-4.8.5 + libQtWebkit okay
gstreamer-0.10.36 / gst-plugins-base-0.10.36 okay ( no other is needed )

In other words, perfect conditions if mplayer is working too :lol:

I don't know the age of your computer, the used CPU and GPU.
If an Nvidia GPU is used and capable for hardware decoding, give me a sign.
In this case I would recommend to use mplayer with enabled vdpau support.
Alternatively you could use mpv, there should be vdpau and vaapi support already included.
This reduced CPU usage drastically. (only a hint )

User avatar
Mike Walsh
Posts: 6351
Joined: Sat 28 Jun 2014, 12:42
Location: King's Lynn, UK.

#123 Post by Mike Walsh »

Hi, Norgo.
Norgo wrote:I don't know the age of your computer, the used CPU and GPU.
Soon remedied, mate.

13 years old.

Dual-core Athlon64 X2 3800+.

ATI Radeon Xpress 200 graphics chip, built-in to the SB400 southbridge. In other words, fairly basic, but it gets the job done.....and after all these years, it's still a lovely sharp picture.

I'm curious. MPlayer 1.0.8b (the built-in original) is an executable. Yet this 1.3.0 seems to be a shared library (a là Chromium), not an executable at all. How the hell does it run?

------------------------------

I'll report back when I've tried SMTube, and let ya know what happens. :) Stay tuned.....


Mike. :wink:

User avatar
Mike Walsh
Posts: 6351
Joined: Sat 28 Jun 2014, 12:42
Location: King's Lynn, UK.

#124 Post by Mike Walsh »

Hi again, Norgo.

Well, SMTube starts and runs fine.....but when you want to play something, SMPlayer starts up.....then MPlayer crashes.

Here's the log read-out:-

Code: Select all

/usr/bin/mplayer -noquiet -slave -identify -nofs -sub-fuzziness 1 -vo xv, -ao alsa, -nodr -double -stop-xscreensaver -nomouseinput -input nodefault-bindings:conf=/dev/null -nokeepaspect -wid 67108900 -monitorpixelaspect 1 -osdlevel 0 -subfont-osd-scale 3 -progbar-align 80 -ass -embeddedfonts -ass-line-spacing 0 -ass-font-scale 1 -noflip-hebrew -ass-styles /root/.config/smplayer/styles.ass -subcp ISO-8859-1 -subpos 100 -volume 44 -prefer-ipv4 -vf-add screenshot=/tmp/smplayer_screenshots/shot -noslices -af-add scaletempo -softvol -softvol-max 110 https://r7---sn-u5a3u5a3-auol.googlevideo.com/videoplayback?quality=hd720&expire=1523416016&dur=1385.186&mn=sn-u5a3u5a3-auol,sn-aigl6ner&mm=31,29&ipbits=0&id=o-AGHDSwJbMro5ur-tffPKo4QUec266i8D1NTP-3pxh6TN&sparams=dur,ei,id,initcwndbps,ip,ipbits,itag,lmt,mime,mm,mn,ms,mv,pl,ratebypass,requiressl,source,expire&mv=m&mt=1523394287&ms=au,rdu&ip=88.109.171.254&lmt=1522880072649585&signature=BBABB5DA8282DFABBEAD8D3712AA986A66D430B1.52B93D6DBC3359C1BA488D8832A6271435F05020&ratebypass=yes&itag=22&ei=cCfNWqnTLI_JVdWjvJgN&fvip=5&pl=19&source=youtube&key=yt6&mime=video/mp4&requiressl=yes&initcwndbps=727500&c=WEB

MPlayer 1.3.0-4.7.1 (C) 2000-2016 MPlayer Team

Playing https://r7---sn-u5a3u5a3-auol.googlevideo.com/videoplayback?quality=hd720&expire=1523416016&dur=1385.186&mn=sn-u5a3u5a3-auol,sn-aigl6ner&mm=31,29&ipbits=0&id=o-AGHDSwJbMro5ur-tffPKo4QUec266i8D1NTP-3pxh6TN&sparams=dur,ei,id,initcwndbps,ip,ipbits,itag,lmt,mime,mm,mn,ms,mv,pl,ratebypass,requiressl,source,expire&mv=m&mt=1523394287&ms=au,rdu&ip=88.109.171.254&lmt=1522880072649585&signature=BBABB5DA8282DFABBEAD8D3712AA986A66D430B1.52B93D6DBC3359C1BA488D8832A6271435F05020&ratebypass=yes&itag=22&ei=cCfNWqnTLI_JVdWjvJgN&fvip=5&pl=19&source=youtube&key=yt6&mime=video/mp4&requiressl=yes&initcwndbps=727500&c=WEB.
libavformat version 57.25.100 (internal)
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xb7586440]Protocol name not provided, cannot determine if input is local or a network protocol, buffers and access patterns cannot be configured optimally without knowing the protocol
ID_VIDEO_ID=0
[lavf] stream 0: video (h264), -vid 0
ID_AUDIO_ID=0
ID_AID_0_LANG=eng
[lavf] stream 1: audio (aac), -aid 0, -alang eng
VIDEO:  [H264]  1280x720  24bpp  25.000 fps  1053.3 kbps (128.6 kbyte/s)
Opening video filter: [ass auto=1]
[ass] auto-open
Opening video filter: [screenshot=/tmp/smplayer_screenshots/shot]
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 57.24.102 (internal)
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
ID_VIDEO_CODEC=ffh264
Clip info:
 major_brand: mp42
ID_CLIP_INFO_NAME0=major_brand
ID_CLIP_INFO_VALUE0=mp42
 minor_version: 0
ID_CLIP_INFO_NAME1=minor_version
ID_CLIP_INFO_VALUE1=0
 compatible_brands: isommp42
ID_CLIP_INFO_NAME2=compatible_brands
ID_CLIP_INFO_VALUE2=isommp42
 creation_time: 2018-04-04 22:13:24
ID_CLIP_INFO_NAME3=creation_time
ID_CLIP_INFO_VALUE3=2018-04-04 22:13:24
ID_CLIP_INFO_N=4
ID_FILENAME=https://r7---sn-u5a3u5a3-auol.googlevideo.com/videoplayback?quality=hd720&expire=1523416016&dur=1385.186&mn=sn-u5a3u5a3-auol,sn-aigl6ner&mm=31,29&ipbits=0&id=o-AGHDSwJbMro5ur-tffPKo4QUec266i8D1NTP-3pxh6TN&sparams=dur,ei,id,initcwndbps,ip,ipbits,itag,lmt,mime,mm,mn,ms,mv,pl,ratebypass,requiressl,source,expire&mv=m&mt=1523394287&ms=au,rdu&ip=88.109.171.254&lmt=1522880072649585&signature=BBABB5DA8282DFABBEAD8D3712AA986A66D430B1.52B93D6DBC3359C1BA488D8832A6271435F05020&ratebypass=yes&itag=22&ei=cCfNWqnTLI_JVdWjvJgN&fvip=5&pl=19&source=youtube&key=yt6&mime=video/mp4&requiressl=yes&initcwndbps=727500&c=WEB
ID_DEMUXER=lavfpref
ID_VIDEO_FORMAT=H264
ID_VIDEO_BITRATE=1053320
ID_VIDEO_WIDTH=1280
ID_VIDEO_HEIGHT=720
ID_VIDEO_FPS=25.000
ID_VIDEO_ASPECT=0.0000
ID_AUDIO_FORMAT=MP4A
ID_AUDIO_BITRATE=125584
ID_AUDIO_RATE=44100
ID_AUDIO_NCH=2
ID_START_TIME=0.00
ID_LENGTH=1385.14
ID_SEEKABLE=1
ID_CHAPTERS=0
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 44100 Hz, 2 ch, floatle, 125.6 kbit/4.45% (ratio: 15698->352800)
ID_AUDIO_BITRATE=125584
ID_AUDIO_RATE=44100
ID_AUDIO_NCH=2
Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio))
==========================================================================
AO: [alsa] 48000Hz 2ch floatle (4 bytes per sample)
ID_AUDIO_CODEC=ffaac
[Mixer] No hardware mixing, inserting volume filter.
Starting playback...


MPlayer interrupted by signal 11 in module: decode_audio
ID_SIGNAL=11
- MPlayer crashed by bad usage of CPU/FPU/RAM.
  Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
  disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn't happen.
  It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
  gcc version. If you think it's MPlayer's fault, please read
  DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
  won't help unless you provide this information when reporting a possible bug.
And this is always with an 'Exit code 1'. (Sorry for the width of this; I copied it from the log as it showed up in SMPlayer, and this is just how it turned out..!)


Mike. :wink:

User avatar
norgo
Posts: 388
Joined: Fri 13 Nov 2015, 17:19
Location: Germany
Contact:

#125 Post by norgo »

Hello Mike,

please start SMplayer and select under
Preferences->Video Output Driver: x11 (slow)
Preferences->Audio Output Driver: null

close and restart SMplayer

If Mplayer is playing now ( of course without sound )
select Preferences->Audio Output Driver: alsa
what's now ?

Post Reply