Ok.
After 35 hours of constantly work, it is done.
Tested successfully (and already in use) in Lucid 525, 528, LxPup 13.01, MacPup 525, Precise 5.6 & 5.7.1, Studio 4, Studio 13.37, Slacko 5.3 and Wary 5.2!
The Modularity Package, which contains SFS PLUS 4 (3.9.3), RoxApp Builder 0.9.0 and RSHs ScriptBox 1.3.7, is now uploaded to my repository at smokey 01.com.
Its size is now 27 MB, but don't be scared on this size. It is just this big, because of some portable applications for Wine and Linux are included, to give you the most comfortable way possible, to have an easy start with that.
Here is the
Modularity Package.
And here is a short Guide how to set this up, plus some information about content etc.pp.
---
Download the
Modularity-Package.tar.gz file and unpack this onto a
EXT partition.
###############################################################################
# 2013-11-11, RSH, GPL2, RSH - R-S-H @ murga-forum (puppy-linux.org) #
# --------------------------------------------------------------------------- #
# SFS P.L.U.S. 4 (3.9.3) including RoxApp Builder 0.9.0 packaged in #
# RSHs ScriptBox 1.3.7 - a RoxApp Application Directory #
###############################################################################
###############
# Requirements:
###############
- at least the boot partition should be either a EXT partition or,
- if not, then there should be a parallel partition 1 in !!!EXT!!! format
Example:
- - boot partition = sdd1
- - parallel partition 1 = sdd2
- - parallel partition 2 = sdd3
###############
# Installation:
###############
- directory 'Module' goes to boot partition (NOT directory!)
- directory 'My-Files' goes to boot partition also
- directory 'PortableApplications' goes to boot partition as well
- directory 'RoxApp-Application-Starters' containes some application starters,
- - that shall be used for an example, to show the re-build of such a RoxApp
- - no matter, where to store these - use !!!partition in EXT format!!!
- content of directory 'RoxApp-Collection', which is directory 'RoxApps'
- - goes to parallel partition 1 (EXT format) or, if not existing, to
- - boot partition (needs to be EXt format then)
- content of 'RSHs-Scriptbox-Including-SFS-PLUS-Suite-And-RoxApp-Builder',
- - which is directory 'RSHs-ScriptBox', goes to parallel partition 1 (EXT)
- - or, if not existing, to boot partition (needs to be EXt format then)
- content of directory 'Some useful Scripts', which is 'Scripts' goes to
- - boot partition again
- directory 'WineInstalls' goes to -yes- boot partition
- files 'lped' and 'lped-bak' are going to boot partition one more time
So, let's assume, you have boot partition sdd1. Then the paths should look
like the following listed:
- /mnt/sdd1/Module # Store SFS Modules here, it downloads to here also
- /mnt/sdd1/My-Files # Your directories an files to be saved herein
- /mnt/sdd1/Pikona # Needs ImageMagick (can use LP2_ImageMagick-6.6.9-5.sfs)
- /mnt/sdd1/PortableApplications # PortableApps for Linux and Wine
- /mnt/sdd1/Scripts # Simple but useful Scripts
- /mnt/sdd1/WineInstalls # Setup.exe files for Wine
- /mnt/sdd1/lped # Directory and File Names
- /mnt/sdd1/lped-bak # Backup of 'lped'
- /mnt/sdd2/RoxApps (or even: /mnt/sdd1/RoxApps, if /mnt/sdd2 doesn't exist)
- /mnt/sdd2/RSHs-ScriptBox (or even: /mnt/sdd1/RSHs-ScriptBox, ... ...)
######################################
# Content of Package - short Overview:
######################################
- Shutdown GUI
- RSHs-ScriptBox Toolbox (38 Scripts/Utilities)
- RSHs-ScriptBox Sub-Tools (16 Scripts/Utilities)
- LP3_SFS_PLUS_3.sfs (SFS P.L.U.S. Suite 4 (3.9.3)
- - this offers 25 applications for the use on editing/building SFS Modules,
- - converting PET to SFS (and revert), creating RunScripts and many more
- LP3_ScriptBox_Icons.sfs (Icons for RSHs ScriptBox)
- LP3_SFS_PLUS-3.9.3-install.pet (needs only to be installd, when the OS
- - shall be enabled to use the SFS P.L.U.S. RunScripts without the use of
- - LP3_SFS_PLUS_3.sfs)
- RunScripts for SFS Modules (currently 545) and portable Applications for
- - Linux (1) and some for the use in Wine (17)
- - it uses 'LP2_WineCorelSuite' from LazY Puppy, which is not available to
- - download - just use the (to be) renamed 'LP2_Wine.sfs' for this
- RSHs RoxApp Builder 0.9.0
- - a useful Tool (GUI enabled with backends) to create RoxApp Programs in
- - different ways for different uses
Beside this there are some portable applications for Linux, Wine and also some
applications to install in Wine (use 'LazY WInstND' for this). Inside directory
'My-Files' are also some directories and files placed. When you want to change
any of the directories names, please edit its name in file 'lped' as well!!!
For SFS P.L.U.S. Suite and for the use of 'RSHs-ScriptBox' above listed file,
'/mnt/boot-partition-here/lped' is needed. For a published OS, that just uses
pre-build RunScript (created and included into the OS by the developer), only
'LP3_SFS_PLUS-3.9.3-install.pet' needs to be installed (ca. 142 KB). For simply
a daily use, do not install anything ---> read more below!
#################################
# How to use this at first start:
#################################
If everything is setup as described above and a fresh clean Puppy has been
successfully booted from boot partition, just open parallel partition 1 and
execute a single left-click onto the RSHs-ScriptBox RoxApp Directory Icon.
That's it!
Ready for use!
Have Fun with that...
RSH
Note: you can use 'RSHs-ScriptBox' and modify it for your own needs. I will not
make any further updates to 'RSHs-ScriptBox'. Only updates of 'SFS P.L.U.S.
Suite' and 'RoxApp Builder' will take place from time to time (if necessary
or evolved somehow).
'RSHs ScriptBox' has found its place inside this package just to show, what
anyone easily can build for his own needs, by using 'SFS P.L.U.S. Suite' and
the 'RoxApp Builder'.
It gives a small impression of what I have setup over here. Currently I do use
a OS of 130 MB in size, plus -setup in a way as it is shown herein- some extra
Software of 11,247 MB - the biggest pool is SFS Modules!
Click it, keep it. And for this time: two thumbs UP!
#############################################
# MD5-Sum: 57696b3a9a5e83ae68a6bfadf30d5a56
#############################################
######################################################
# SHA1-Sum: fb700c17818cb6a38b115da07c671c0a5b07ec69
######################################################
###############################################################################
# End of: SFS P.L.U.S. 4 (3.9.3) including RoxApp Builder 0.9.0 packaged in #
# RSHs ScriptBox 1.3.7 - a RoxApp Application Directory #
# --------------------------------------------------------------------------- #
# 2013-11-11, RSH, GPL2, RSH - R-S-H @ murga-forum (puppy-linux.org) #
###############################################################################
Edit:
Just forgot to mention:
To use the RoxApps included in the Modularity-Package, download its related SFS File from my repository at smokey01.com/RSH/ and store it to /mnt/your-boot-partition/Module - the RoxApps do need the SFS at this location, because all they use is a symbolic link to the SFS.