(old)Puppy Linux Discussion Forum

elroy wrote:
The file you’d need to alter is /usr/bin/pupsaveconfig. First, create a backup of the original. Then edit the original to only contain the following:

Code: Select all

#! /bin/bash

PUPSAVECONF=/etc/rc.d/pupsave.conf
PRECHOICE=no

cat <<EOF > $PUPSAVECONF
PRECHOICE=no
POPUP=false
EJECTCD=true
VERBOSE=false
EOF

Remember to ensure that the file permission is set to executable. After doing this, you will no longer get the create savefile at shutdown dialog, which of course would only be useful if you wish to run without a savefile.

PRECHOICE=no
POPUP=false
EJECTCD=true
VERBOSE=

anikin wrote:Geoffrey, thank you for clarifying this. However, what gets me thinking is this: suppose a person has a system with a PAE supported processor (Intel atom 270 and only 2GB of RAM - eeepc). Which one will be his best bet? PAE - there's not and never will be that much of RAM on this machine. Non-PAE?

don570 wrote:Imagination 3.0 slideshow maker

I was able to get Imagination 3.0 slideshow maker to work

Bligh wrote:Can someone show me where to learn more about adrive and zdrive?
Cheers

mikeslr wrote:Hi All,
Its not my intention to start a war over the PAE kernel issue. Perhaps, as gcmartin says, the hardware to support it has been around since 1997. But I have a Thinkpad T42 manufactured in 2004 which will not boot kernels that are PAE enabled. I doubt that earlier Thinkpads will, and Thinkpads were fairly popular in part because they were robustly made and so still may be around in large numbers. And if IBM wasn't producing Laptops which didn't need and could not use more than 3.5gbs of RAM, why would IBM's competors incur the expense? So I suspect that any owners of such Thinkpads, and perhaps comparable laptops, looking to replace ancient XP OSes with a state of the art OS will discover Puppies and be disappointed that they just won't run: worse, sufficiently turned off by having wasted time and effort to download and burn a disk to never look at Puppy again.
Of course, there are other Puppies, and Carolina --like Precise-- is targeted to "newer" machines. I'm just suggesting that "newer" may be "newer" than Barry K and the Devs think.
Carolina 002, if I remember correctly, used a non-PAE-enabled kernel. But it's no longer available for download. And, I think Elroy or Geoffrey indicated an intention to someday publish another non-PAE version. But in the meantime I figured --having read somewhere that it's easy to change kernels using Custom Builder-- why not do so on my Quod-core and port it over to my Thinkpad.
By the way, Elroy and Geoffrey, Custom Builder works great in creating one's own adrive. I really appreciate that. But this was the first time I tried to change kernels. Got to the part which requires you to browse to your "kernel package." What's a kernel package? Something different than a Kernel Source? Where do you get an alternate kernel package?
I know there's a thread on how to switch kernels --I think started by jrb. But that involves de-constructing two Puppies in order to build a new one. Not easy, and certainly not something I'd expect to have to do in the middle of a running "wizard." Finally, thought of searching various repos for "kernel packages" and discovered "kernel_sources-3.2.13-ski.sfs" here:http://www.smokey01.com/menu/. I downloaded it and intend to run Custom Builder and point it to the download.
Am I on the right track? If not, how does one acquire a "kernel package?" And if so, does anyone know of similar packages?

Thanks in advance,

mikesLr

mikeslr wrote:Hi All,
Its not my intention to start a war over the PAE kernel issue. Perhaps, as gcmartin says, the hardware to support it has been around since 1997. But I have a Thinkpad T42 manufactured in 2004 which will not boot kernels that are PAE enabled. I doubt that earlier Thinkpads will, and Thinkpads were fairly popular in part because they were robustly made and so still may be around in large numbers. And if IBM wasn't producing Laptops which didn't need and could not use more than 3.5gbs of RAM, why would IBM's competors incur the expense? So I suspect that any owners of such Thinkpads, and perhaps comparable laptops, looking to replace ancient XP OSes with a state of the art OS will discover Puppies and be disappointed that they just won't run: worse, sufficiently turned off by having wasted time and effort to download and burn a disk to never look at Puppy again.
Of course, there are other Puppies, and Carolina --like Precise-- is targeted to "newer" machines. I'm just suggesting that "newer" may be "newer" than Barry K and the Devs think.
Carolina 002, if I remember correctly, used a non-PAE-enabled kernel. But it's no longer available for download. And, I think Elroy or Geoffrey indicated an intention to someday publish another non-PAE version. But in the meantime I figured --having read somewhere that it's easy to change kernels using Custom Builder-- why not do so on my Quod-core and port it over to my Thinkpad.
By the way, Elroy and Geoffrey, Custom Builder works great in creating one's own adrive. I really appreciate that. But this was the first time I tried to change kernels. Got to the part which requires you to browse to your "kernel package." What's a kernel package? Something different than a Kernel Source? Where do you get an alternate kernel package?
I know there's a thread on how to switch kernels --I think started by jrb. But that involves de-constructing two Puppies in order to build a new one. Not easy, and certainly not something I'd expect to have to do in the middle of a running "wizard." Finally, thought of searching various repos for "kernel packages" and discovered "kernel_sources-3.2.13-ski.sfs" here:http://www.smokey01.com/menu/. I downloaded it and intend to run Custom Builder and point it to the download.
Am I on the right track? If not, how does one acquire a "kernel package?" And if so, does anyone know of similar packages?

Thanks in advance,

mikesLr

mikeslr wrote:Hi All,
Its not my intention to start a war over the PAE kernel issue. Perhaps, as gcmartin says, the hardware to support it has been around since 1997. But I have a Thinkpad T42 manufactured in 2004 which will not boot kernels that are PAE enabled. I doubt that earlier Thinkpads will, and Thinkpads were fairly popular in part because they were robustly made and so still may be around in large numbers. And if IBM wasn't producing Laptops which didn't need and could not use more than 3.5gbs of RAM, why would IBM's competors incur the expense? So I suspect that any owners of such Thinkpads, and perhaps comparable laptops, looking to replace ancient XP OSes with a state of the art OS will discover Puppies and be disappointed that they just won't run: worse, sufficiently turned off by having wasted time and effort to download and burn a disk to never look at Puppy again.
Of course, there are other Puppies, and Carolina --like Precise-- is targeted to "newer" machines. I'm just suggesting that "newer" may be "newer" than Barry K and the Devs think.
Carolina 002, if I remember correctly, used a non-PAE-enabled kernel. But it's no longer available for download. And, I think Elroy or Geoffrey indicated an intention to someday publish another non-PAE version. But in the meantime I figured --having read somewhere that it's easy to change kernels using Custom Builder-- why not do so on my Quod-core and port it over to my Thinkpad.
By the way, Elroy and Geoffrey, Custom Builder works great in creating one's own adrive. I really appreciate that. But this was the first time I tried to change kernels. Got to the part which requires you to browse to your "kernel package." What's a kernel package? Something different than a Kernel Source? Where do you get an alternate kernel package?
I know there's a thread on how to switch kernels --I think started by jrb. But that involves de-constructing two Puppies in order to build a new one. Not easy, and certainly not something I'd expect to have to do in the middle of a running "wizard." Finally, thought of searching various repos for "kernel packages" and discovered "kernel_sources-3.2.13-ski.sfs" here:http://www.smokey01.com/menu/. I downloaded it and intend to run Custom Builder and point it to the download.
Am I on the right track? If not, how does one acquire a "kernel package?" And if so, does anyone know of similar packages?

Thanks in advance,

mikesLr

elroy wrote:Carolina-005 is now available. Please visit the News page for info and download link.

smokey01 wrote:peebee try this one.
http://smokey01.com/software/iso/lina-0 ... .iso.delta

peebee wrote: Hmmmmmmm

My lina-004.iso has a different md5 to the one on the download site.....
mine: b1318cd0b25c401c798ba7ffed1d878a lina-004.iso
378MB 28Nov

repository: cfbfca0adb506abd2842cdea836e6d20 lina-004.iso
378MB 28Nov

004 was created using the 003-004 delta....

Looks like I need to download the full 005 iso

Do repeated applications of delta files not produce identical isos??

I must admit that I don't check the new iso's md5 if I've downloaded a delta and it successfully creates the new iso.

Cheers
peebee

peebee wrote:Looks like I need to download the full 005 iso

Do repeated applications of delta files not produce identical isos??

elroy wrote:

peebee wrote:Looks like I need to download the full 005 iso

Do repeated applications of delta files not produce identical isos??

I had to re-upload 004 right after release due to a missing file-permission for the probepart script. It's possible that you got the 1st download. But it's more likely that I didn't update the delta file (003 to 004) after fixing that. I don't know that for fact, but from what you're describing that would be my guess. My apologies.