Page 21 of 22
How to Install Your Printer/Scanner in Puppy
Posted: Tue 27 Dec 2016, 17:48
by Sky Aisling
Success! Thank you perdido.
32-bit hplip pet for printing
https://archive.org/download/Puppy_Linu ... 3.14.4.pet
Embarrass not, how many times have I misread the numbers on a piece of code? So easy to do.
Sky
Posted: Sat 19 Aug 2017, 16:57
by Subito Piano
Help needed -- using an HP 3500c scanner with TahrPup. For some reason, I can apparently scan again and again as long as i do NOT use the preview window function to preview When i do that, i get the message
Code: Select all
Error during read: Error during device I/O.
I installed the hplip_scan-3.16.x.pet package, still no joy.=, even after rebooting. Any thoughts?
Some similar loss of connection with PeaseyScan, but not all the time. Still not sure if it has to do with scan mode (color/lineart, etc.). Thoughts?
EDIT: Seems it definitely is tied in with the color mode only, not Grey or other settings. I've tried the various matrices (NTSC, etc.) to no avail. Will keep testing as able, but feedback appreciated.
Posted: Sat 19 Aug 2017, 18:00
by rcrsn51
Subito Piano wrote:I installed the hplip_scan-3.16.x.pet package, still no joy
What driver were you using BEFORE you installed the hplip_scan-3.16.x.pet package?
Some similar loss of connection with PeaseyScan, but not all the time.
What scanner program were you using BEFORE PeasyScan?
Posted: Sat 19 Aug 2017, 18:22
by Subito Piano
Thanks for the quick reply (and this entire thread!)
Sorry -- i should have mentioned i was using xsane first.
I don't know what driver i was (or am now) using nor how to determine that -- ??
If you can tell me how to find that out, of course i will post it.
I did follow the advice at an Arch Linux forum and added hpaio and hpoj to /etc/sane.d/dll.conf. but that didn't seem to help.
Gracias....
Posted: Sat 19 Aug 2017, 18:39
by Subito Piano
IDK if this helps:
Code: Select all
sh-4.3# lsusb
Bus 002 Device 004: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card Reader Controller
Bus 002 Device 003: ID 5986:0190 Acer, Inc
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 046d:c534 Logitech, Inc.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 03f0:0601 Hewlett-Packard ScanJet 6300c
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
sh-4.3# lsusb -t
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M
|__ Port 3: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 5: Dev 4, If 0, Class=Vendor Specific Class, Driver=rts5139, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 2: Dev 6, If 0, Class=(Defined at Interface level), Driver=usbfs, 12M
Trying to get beyond "usbfs," both
and
didn't seem to yield much info (as per
this post)
Posted: Sun 20 Aug 2017, 16:26
by rcrsn51
This may be a bug in the driver. Your first trouble-shooting step should be a temporary clean install without a save file/folder. Then test the driver again.
Posted: Sun 20 Aug 2017, 22:36
by Subito Piano
Duh -- ! I should have thought of that. Unfortunately, it didn't work. I rebooted with the pfix=ram option, previewed in color, then scanned in color -- and it worked! But then when i previewed again, the same error message appeared. Je n’ai pas de joie...
rcrsn51_foomatic20140426
Posted: Sun 15 Apr 2018, 15:43
by 8Geee
Recently I've seen questions concerning the availability of these nice foomatic driver pets rcrsn51 graciously provided years ago. I happen to have a copy of the 2014.04.26 version and the patch JICSH.
The files are available
HERE
The main file, the patch, and an md5sum file are there. These are pets, not zipped files per se.
Regards
8Geee
Posted: Sun 15 Apr 2018, 20:16
by Subito Piano
Thanks, 8Geee. I switched to an Epson scanner (Epson Perfection 2360). Thankfuly, it works -- albeit
VERY s - l - o - w - l - y ! !
So - for anyone stumbling on this later -- if your scanner is recognized, and you push "preview" or "scan" but nothing happens right away, I suggest waiting -- like head over to Distrowatch and research a half-dozen new releases. If your scanner is going to work at all, it should make some noise before you finish reading up on them all...
Can't Get Printer Working in Puppy
Posted: Wed 20 Jun 2018, 23:11
by fishmanluvslinux
So far I have not been able to get my HP 8600 All-In-One OfficeJet to work. I am not the greatest with Cups so, I have tried so many suggestions. Any info on how to get this working would be greatly appreciated.
Posted: Thu 21 Jun 2018, 02:50
by Subito Piano
So -- in order to not be redundant, what have you tried so far? I assume you downloaded the HPLIP package, anything to do with HP from the repositories, and checked the HP website? Are you using Ubuntu-based Puppy or Slacko?
Posted: Fri 02 Nov 2018, 10:50
by zigbert
Installed the OKI 321dn (colour-laser) just by adding the ppd file from oki.com
https://www.oki.com/eu/printing/support ... 3&lang=ac2
Brother Multifunction HLL2395DW
Posted: Mon 10 Dec 2018, 10:55
by ozsouth
I got a Brother HLL2395DW multifunction printer/scanner, downloaded the driver .deb files from the Brother site, and installed them. I then set up the printer wirelessly, setting a fixed ip via its LCD panel, and installed the printer via Puppy's printer admin (I use AppSocket option). To set up the scanner, I ran in terminal:
brsaneconfig4 -a name=Brother Model=HL-L2395DW ip=(fixed ip address)
Then I ran xsane. Xenial, Slacko & Lxpup did not have an option for wireless scanning, so I added in the wireless part from bionicpup xsaneshell (in /usr/bin). Attached as as .pet below. I re-ran xsane, and it works (tested in 64 bit pups above).
Re: Brother Multifunction HLL2395DW
Posted: Sat 02 Feb 2019, 22:55
by perdido
ozsouth wrote:I got a Brother HLL2395DW multifunction printer/scanner, downloaded the driver .deb files from the Brother site, and installed them. I then set up the printer wirelessly, setting a fixed ip via its LCD panel, and installed the printer via Puppy's printer admin (I use AppSocket option). To set up the scanner, I ran in terminal:
brsaneconfig4 -a name=Brother Model=HL-L2395DW ip=(fixed ip address)
Then I ran xsane. Xenial, Slacko & Lxpup did not have an option for wireless scanning, so I substituted the xsaneshell (in /usr/bin) from bionicpup, attached as as .pet below, re-ran xsane, and it works (tested in 64 bit pups above).
Thanks Ozsouth, using it with a
Brother MFC-J450DW installed and running on upupbb-18.05 32-bit
Everything working great, thanks!
Driver not found
Posted: Mon 02 Dec 2019, 04:49
by Ovoxonegas
Hello friend
I've searching a driver for my "Hp Deskjet Ink Advantage 3525"
and there is no useful data
Any Recomendation?
What we/I/You suggest to do to solve this?
Salutations
Posted: Mon 02 Dec 2019, 09:21
by mistfire
@Ovoxonegas. Did you install "hplip" package?
How to Install Your Printer/Scanner in Puppy
Posted: Fri 03 Apr 2020, 18:34
by Sky Aisling
Hello Kennel mates,
Can someone direct me to where to find the latest pet downloads for HPLIP and CUPS (both 32 and 64 bit)?
Beginning March 10, 2020 the CUPS site gives me Internal Server Error on both my HP machines 32 bit and 64 bit.
The HPLIP code is out-of-date.
Print connection to computer no longer works. No print feature functioning.
Scan connection to computer no longer works. No scan feature functioning.
The copy feature works and printing out of HP help instructions works.
Printer:
HP OfficeJet 4650 All-in-One Printer series
Model: 4655
Serial : TH7694C0070662
Product: F1J00A
Service ID: 27290
Printer Zone: (PX):2
Firmware Version: CUP1FN1830AR
Hardware and Software:
HP HDX Premium Series - Tahrpup 6.0.5 updated fairly regularly
HP dm1 - DPup Stretch 7.0.5
Thank you in advance for any assistance you can give.
Sky
Posted: Sat 04 Apr 2020, 05:38
by Geek3579
I had the exact same issue about a month ago. I solved it by reinstalling the same HPLIP print (and scan? file - I think it was in the puppy package manager. This has happened to me before and I applied the same remedy.
In any case I vaguely recall seeing updated HPLIP files on the HP website.
Hope this helps.
How to Install Your Printer/Scanner in Puppy
Posted: Sat 04 Apr 2020, 17:38
by Sky Aisling
Geek3579, Thank you for the response.
Ironic you should mention your solution as I just tried the same idea late last night. It worked. Well, at least I've got print enabled again on one machine. However, the scan isn't working. Did this remedy also restore your scan function?
Thanks again,
Sky
Posted: Sat 04 Apr 2020, 18:47
by watchdog