Page 3 of 4
Posted: Tue 12 Oct 2010, 04:17
by technosaurus
I added pprocess to my bashbox script - it went fairly smoothly & I even added a couple of parameters for different formatting, but still need to add the locales. (I am trying to consolidate as many functions as possible into a single script to ease development) Once we get everything together we can probably do some significant code reduction through code reuse (another bonus would be a unified look and feel).
Let me know what you think....or any other goodies you'd like to see added. Is there a reason you have separate files for your functions?
bashbox thread
Posted: Sun 12 Dec 2010, 11:39
by eastler_dart
hi all, hi zigbert,
I have tried to download the NLS-pet for pprocess, I didn't sucess
Also go direct to
http://www.meownplanet.net/zigbert/ does not show an NLS-Pet for pprocess
Do you have one? Please, can you put it online?
Thanks a lot
Eastler
Posted: Sun 12 Dec 2010, 15:39
by zigbert
eastler_dart wrote:I have tried to download the NLS-pet for pprocess, I didn't sucess
NLS-file is uploaded
Thank you
Sigmund
Posted: Sun 12 Dec 2010, 21:53
by eastler_dart
hi all, hi zigbert,
thanks a lot, works fine.
But the languagefile misses some entries.
So I have added them, you get it via pm.
I think, this was not the last proggy from you
i will use
thanks again
Eastler
Posted: Mon 13 Dec 2010, 20:25
by zigbert
eastler_dart
Thank you for your effort!
wow has already made another attempt to improve the LANG detection (like in Pmusic, Pburn.....)
I will upload soon
Sigmund
Posted: Tue 14 Dec 2010, 20:07
by zigbert
version 2.2.2
- Bugfix: show value of $LOC_SERACHTEXT
Pprocess 2.2.2
Posted: Fri 21 Jan 2011, 15:45
by wuwei
In Wary 5.0 pprocess 2.2.2 behaves very unexpectedly.
When I try to run pprocess it opens for a split second and crashes immediately. Terminal gives me a reference to line 146.
This is a frugal install of Wary with a pupsave file.
When I install the tar.gz of version 0.3 from page 1 of this thread it runs fine.
Pprocess 2.2.2 works when I boot Wary with pfix=ram. So it is not a bug in pprocess.
Consequently I must have done something which causes this behavior and which is retained in the pupsave file.
Short of reinstalling and building a fresh pupsave file, do you have any idea for a possible remedy of this situation?
Re: Pprocess 2.2.2
Posted: Fri 21 Jan 2011, 19:43
by sc0ttman
Pprocess crashes for me using Puppy 4.2 (specifically puplite 3.0)
It appears for a second, and then disappears..
I checked the terminal. it reports many errors similar to this:
Code: Select all
gtkdialog:1941 **: gdk_pixmap_new: assertion [blah]
Although it did work when I updated libc, glib, and many others
Posted: Sun 23 Jan 2011, 05:57
by disciple
FWIW I booted 4.1.1 with pfix=ram and installed Pprocess 2.2.2 and it worked fine.
Posted: Sun 23 Jan 2011, 13:15
by zigbert
Version 2.2.3
See main post
Changelog
- Bugfix: While-loop kept running after pprocess was closed.
Posted: Sun 21 Aug 2011, 07:05
by zigbert
Version 2.2.4
See main post
Changelog
- Bugfix: End all pids after quit. (thanks to playdayz)
- Bugfix: Detect macrolanguage (fr, en..) when lang contains utf or similar post info.
Posted: Tue 24 Jul 2012, 09:21
by Makoto
Are there any archives of the previous versions of pprocess? I'm using Puppy 4.3.1, and the latest version doesn't work for me (I'm guessing, because of the updated gtkdialog requirement).
What would be the latest version that would work with Puppy 4.3.1, as I think I was also told, a while back, that updating gtkdialog on 4.3.1 wasn't an easy thing to do...
Posted: Tue 24 Jul 2012, 10:51
by zigbert
Makoto
Please try 2.1.1
I think that one should be good for you
Posted: Tue 24 Jul 2012, 14:26
by Makoto
Thanks!
I'll try to take a look at it later, today.
Posted: Wed 25 Jul 2012, 10:46
by Makoto
...Sorry for the late reply; spent nearly the entire day helping someone move. Argh. @_@
Actually, I found my archive of downloaded versions - I have 2.2.0, 2.2.2 and 2.2.4, the versions before 2.2.4 I was using with my previous Puppy 4.3.1 setup.
2.2.2 seems to be working fine.
(...well, I hope. I'm assuming that's the version I had been using, since my archive only has those three versions in it. I'd installed it some time ago on my previous setup, and it's since gone down for good, so I can't check.
)
Posted: Fri 27 Jul 2012, 20:34
by zigbert
Version 2.2.5
See main post
Changelog
- Bugfix: Call for gtkdialog4
- Bugfix: Do not allow more than one detected langauge. (thanks to shinobar)
Posted: Mon 30 Jul 2012, 05:55
by zigbert
Version 2.3.0
See main post
Changelog
- Use gettext for NLS (thanks to rodin.s)
Posted: Mon 30 Jul 2012, 15:39
by zigbert
Version 2.3.1
See main post
Changelog
- Adjust gettext to work with updated MoManager (thanks to L18L)
Posted: Mon 30 Jul 2012, 23:33
by BarryK
zigbert wrote:Version 2.3.1
See main post
Changelog
- Adjust gettext to work with updated MoManager (thanks to L18L)
I may have been too hasty putting that solution into Woof, see discussion in my blog.
I will reconsider this again this evening.
Posted: Tue 31 Jul 2012, 07:12
by zigbert
No problem at all.
I'll keep an eye on it