Posted: Mon 11 Aug 2008, 15:34
There are no obviously wacom-related errors in either of those log files, and it appears to be successfully using all the inputs I added to the xorg.config file. (There are some other errors which I don't recognize, but none of them are happening near the points where it loads the wacom stuff.)
Here's the current server and input sections in my xorg.config, if that helps:
Section "ServerLayout"
Identifier "Default"
Screen "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "stylus" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "pad" # For Intuos3/CintiqV5/Graphire4/Bamboo tablets
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "dvorak" #xkeymap0
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
#Option "Emulate3Timeout" "50"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/event2" # USB ONLY
Option "Type" "stylus"
Option "USB" "on" # USB ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/event2" # USB ONLY
Option "Type" "eraser"
Option "USB" "on" # USB ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/event2" # USB ONLY
Option "Type" "cursor"
Option "USB" "on" # USB ONLY
EndSection
# This section is for Intuos3, CintiqV5, Graphire4, or Bamboo
Section "InputDevice"
Driver "wacom"
Identifier "pad"
Option "Device" "/dev/input/event2" # USB ONLY
Option "Type" "pad"
Option "USB" "on" # USB ONLY
EndSection
...to the limit of my limited knowledge and what google shows me, I don't know what else to try changing: I did find a google result where somebody fixed this problem by changing xorg.config, but they changed it to look like mine, so. And it does currently work in every other way.
Those two log files are mostly complaining about not being able to load glx, dri, acpi and apm : are any of those things relevant?
xerrs.log says, about wacom,
(==) Using config file: "/etc/X11/xorg.conf"
stylus X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Graphire4 tablet speed=9600 maxX=10208 maxY=7424 maxZ=511 resX=2032 resY=2032 suppress=2 tilt=enabled
(==) Wacom device "stylus" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(==) Wacom device "eraser" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(==) Wacom device "cursor" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(==) Wacom device "pad" top X=0 top Y=0 bottom X=10208 bottom Y=7424
/usr/X11R7/bin/jwm
JWM: warning: color depth is 16, disabling icon alpha channel
and xorg.0.log says
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "stylus"
(**) |-->Input Device "eraser"
(**) |-->Input Device "cursor"
(**) |-->Input Device "pad"
and then, later,
II) LoadModule: "wacom"
(II) Loading /usr/X11R7/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
and
(**) stylus: always reports core events
(**) stylus device is /dev/input/event2
(**) stylus is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) stylus: reading USB link
(**) Option "BaudRate" "9600"
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/input/event2
(**) eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) eraser: reading USB link
(**) Option "BaudRate" "9600"
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/input/event2
(**) cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) cursor: reading USB link
(**) Option "BaudRate" "9600"
(**) pad device is /dev/input/event2
(**) pad is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) pad: reading USB link
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "pad" (type: Wacom Pad)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Option "Device" "/dev/input/event2"
stylus Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Graphire4 tablet speed=9600 maxX=10208 maxY=7424 maxZ=511 resX=2032 resY=2032 suppress=2 tilt=enabled
(==) Wacom device "stylus" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(==) Wacom device "eraser" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(==) Wacom device "cursor" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(==) Wacom device "pad" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(II) Mouse0: ps2EnableDataReporting: succeeded
All of that looks good to me, but I don't read log files very fluently. Any help? Thanks.
Here's the current server and input sections in my xorg.config, if that helps:
Section "ServerLayout"
Identifier "Default"
Screen "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "stylus" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "pad" # For Intuos3/CintiqV5/Graphire4/Bamboo tablets
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "dvorak" #xkeymap0
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
#Option "Emulate3Timeout" "50"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/event2" # USB ONLY
Option "Type" "stylus"
Option "USB" "on" # USB ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/event2" # USB ONLY
Option "Type" "eraser"
Option "USB" "on" # USB ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/event2" # USB ONLY
Option "Type" "cursor"
Option "USB" "on" # USB ONLY
EndSection
# This section is for Intuos3, CintiqV5, Graphire4, or Bamboo
Section "InputDevice"
Driver "wacom"
Identifier "pad"
Option "Device" "/dev/input/event2" # USB ONLY
Option "Type" "pad"
Option "USB" "on" # USB ONLY
EndSection
...to the limit of my limited knowledge and what google shows me, I don't know what else to try changing: I did find a google result where somebody fixed this problem by changing xorg.config, but they changed it to look like mine, so. And it does currently work in every other way.
Those two log files are mostly complaining about not being able to load glx, dri, acpi and apm : are any of those things relevant?
xerrs.log says, about wacom,
(==) Using config file: "/etc/X11/xorg.conf"
stylus X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Graphire4 tablet speed=9600 maxX=10208 maxY=7424 maxZ=511 resX=2032 resY=2032 suppress=2 tilt=enabled
(==) Wacom device "stylus" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(==) Wacom device "eraser" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(==) Wacom device "cursor" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(==) Wacom device "pad" top X=0 top Y=0 bottom X=10208 bottom Y=7424
/usr/X11R7/bin/jwm
JWM: warning: color depth is 16, disabling icon alpha channel
and xorg.0.log says
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "stylus"
(**) |-->Input Device "eraser"
(**) |-->Input Device "cursor"
(**) |-->Input Device "pad"
and then, later,
II) LoadModule: "wacom"
(II) Loading /usr/X11R7/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
and
(**) stylus: always reports core events
(**) stylus device is /dev/input/event2
(**) stylus is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) stylus: reading USB link
(**) Option "BaudRate" "9600"
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/input/event2
(**) eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) eraser: reading USB link
(**) Option "BaudRate" "9600"
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/input/event2
(**) cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) cursor: reading USB link
(**) Option "BaudRate" "9600"
(**) pad device is /dev/input/event2
(**) pad is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) pad: reading USB link
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "pad" (type: Wacom Pad)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Option "Device" "/dev/input/event2"
stylus Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Graphire4 tablet speed=9600 maxX=10208 maxY=7424 maxZ=511 resX=2032 resY=2032 suppress=2 tilt=enabled
(==) Wacom device "stylus" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(==) Wacom device "eraser" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(==) Wacom device "cursor" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(==) Wacom device "pad" top X=0 top Y=0 bottom X=10208 bottom Y=7424
(II) Mouse0: ps2EnableDataReporting: succeeded
All of that looks good to me, but I don't read log files very fluently. Any help? Thanks.