(old)Puppy Linux Discussion Forum

Posted: **Tue 17 May 2011, 21:11**

Hi yorkiesnorkie
just installed your clamav pet on puppy 525 and updated the virus database all fine for now i will run a scan on my windows partition at the week end and let you know the results then.

Thanks again
Dale

Posted: **Tue 17 May 2011, 23:55**

Hi Dale,

Cool, I'm glad the pet is working for you. Just remember that ClamAV doesn't fix anything, it only detects and if you tell it to, removes files to quarantine. If you use the remove feature be careful.

Yorkie

Posted: **Wed 18 May 2011, 19:34**

Hi yorkiesnorkie

That's ok i know it removed avg last time but i'm careful so no problem

Dale

Posted: **Thu 08 Dec 2011, 20:13**

Tried download and install to a latest PUP528 Lucid from Playdayz.

Failed. Ideas would be appreciated.

Thanks in advance
EDIT: Tried to download using Chrome Browser on several ocasions. In EACH CASE, the download is being terminated on the other end for some reason, just prior to completion. Thus, I'm getting incomplete downloads, too. Maybe you might know why???
SOLVED The problem has cleared???

Posted: **Wed 21 Dec 2011, 01:17**

Are you aware that FreshClam selection in your first post does NOT work?

Hope this helps

Posted: **Sat 24 Dec 2011, 22:04**

gcmartin wrote:Tried download and install to a latest PUP528 Lucid from Playdayz.

Failed. Ideas would be appreciated.

Thanks in advance
EDIT: Tried to download using Chrome Browser on several ocasions. In EACH CASE, the download is being terminated on the other end for some reason, just prior to completion. Thus, I'm getting incomplete downloads, too. Maybe you might know why???
SOLVED The problem has cleared???

Your attempting to install the pet, which was built with Puppy Linux 431, in 528. The pet was not compiled for 528. So, I can't guarantee it'll work 100%.

I'm not sure about the other problems with Chrome. It may be the host where the pet is or it could be the browser. You would have to follow up with the 528 posts and see if there are any reported errors.

Y.

Posted: **Sat 24 Dec 2011, 22:16**

gcmartin wrote:Are you aware that FreshClam selection in your first post does NOT work?

Hope this helps

Since your running Puppy 528 I can't guarantee that the Pet compiled for 431 will work with your version. I do know that Freshclam did work when the pet was originally compiled and installed in Puppy Linux 431.

It may require a new version compiled for 528. If you feel really adventurous you can always try re-compiling the application yourself. I'm not running 528.

Y.

Posted: **Tue 27 Dec 2011, 19:32**

The pet I made of ClamAV is currently version 0.97.0, therefore Freshclam will report that the ClamAv needs to be updated. Don't Panic! I just need to recompile the pet using the latest source.

Note that this pet currently installs on Puppy 527 without any difficulty. I installed the pet and ran Freshclam and it did update its DB.

Code: Select all

sh-4.1# freshclam
ClamAV update process started at Tue Dec 27 12:14:19 2011
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.97 Recommended version: 0.97.3
DON'T PANIC! Read http://www.clamav.net/support/faq
Downloading main-54.cdiff [100%]
main.cld updated (version: 54, sigs: 1044387, f-level: 60, builder: sven)
WARNING: getfile: daily-12639.cdiff not found on remote server (IP: 200.236.31.1)
WARNING: getpatch: Can't download daily-12639.cdiff from database.clamav.net
WARNING: getfile: daily-12639.cdiff not found on remote server (IP: 24.215.0.24)
WARNING: getpatch: Can't download daily-12639.cdiff from database.clamav.net
WARNING: getfile: daily-12639.cdiff not found on remote server (IP: 208.70.244.158)
WARNING: getpatch: Can't download daily-12639.cdiff from database.clamav.net
WARNING: Incremental update failed, trying to download daily.cvd
Downloading daily.cvd [100%]
[LibClamAV] ***********************************************************
[LibClamAV] ***  This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
[LibClamAV] ***********************************************************
[LibClamAV] ***  This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
daily.cvd updated (version: 14195, sigs: 54474, f-level: 63, builder: guitar)
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Current functionality level = 60, recommended = 63
DON'T PANIC! Read http://www.clamav.net/support/faq
Downloading bytecode.cvd [100%]
[LibClamAV] ***********************************************************
[LibClamAV] ***  This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
[LibClamAV] ***********************************************************
[LibClamAV] ***  This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
bytecode.cvd updated (version: 158, sigs: 38, f-level: 63, builder: edwin)
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Current functionality level = 60, recommended = 63
DON'T PANIC! Read http://www.clamav.net/support/faq
[LibClamAV] ******************************************************
[LibClamAV] ***      Virus database timestamp in the future!   ***
[LibClamAV] ***  Please check the timezone and clock settings  ***
[LibClamAV] ******************************************************
[LibClamAV] ***********************************************************
[LibClamAV] ***  This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
[LibClamAV] ***********************************************************
[LibClamAV] ***  This version of the ClamAV engine is outdated.     ***
[LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
[LibClamAV] ***********************************************************
Database updated (1098899 signatures) from database.clamav.net (IP: 208.70.244.158)
sh-4.1#

Posted: **Tue 27 Dec 2011, 19:44**

Hi gcmartin,

I installed the current pet of ClamAV 0.97.0 and it reports the build needs to be updated to 0.97.3. But, it does install, freshclam works etc., on Puppy 5.2.7. It reports that the build needs to be updated, but it works.

My current install is the 527 Ubuntu compatible build. If your going to use Slacko for example, it would have to be built for slackware on that version using the devx for that. Since you've got a bunch of builds going, which one do you use the most? I have no plans to make a bunch of builds. Hence the tutorial I posted for DIY.

My plan is to stick with the Ubuntu compatible builds, so for 528 for example I'd need to install a new frugal build, but I'd have to do some backup first.

Greg

Posted: **Wed 28 Dec 2011, 17:57**

A new pet of 0.97.3 has been created compiled under 528 for i686, see the first post.

Posted: **Thu 26 Jan 2012, 19:08**

You don't happen to have the GUI for it?

Posted: **Fri 15 Feb 2013, 17:53**

This is the only pet so far that works with PrecisePuppy 5.4.3.

But it's telling me it's outdated, do you know if there's a puppy package for Precise 5.4.3 or a new pet from you?

Thanks in advance!

Posted: **Wed 21 Aug 2013, 03:08**

clamav-0.98.pet

MD5sum: 95a71ea286d3ec2fb21b813bed4181cb
SHA1: 13a2277c990c61f6a5d0c9d073729c36ef936f7d
SHA256: 9352a3f67b3abef049f29162673aec65c18fd3deb4e708b61f882d257b8a60c6

script:. clam-scan

script ~/Startup/clam-update:. clam-update

Posted: **Sat 30 Nov 2013, 15:00**

yorkiesnorkie,

Could you please re-upload the new clamav .pet for puppy431?

I would like to upgrade and thank you for tutorial on how to fix. Mine is also working!

Kent C.

(old)Puppy Linux Discussion Forum

clamav-0.97.3-i386.pet - 528

clamav-0.97-i386.pet

clamav-0.97-i386.pet

Could not install

First Post in this thread - FreshClam

Re: Could not install

Re: First Post in this thread - FreshClam

Don't Panic ClamAV 0,97.0

Looking ahead...

New Pet

Thanks!