Dpup Exprimo 5.X.15
I have fixed the getflash script. Now it informs the version of installed flashplayer and it pings numerical address. Wcpu-freq has been downgraded to the non 3.X supported version, not sure if it makes difference to Billtoo. Pmusic-2.4.0 with fixed Nad3 theme, Pupcontrol and PupClock updated to the latest.
I will upload it tomorrow and I suppose it should be the announced 5.X.13 with list of changes since 5.X.12.
I will upload it tomorrow and I suppose it should be the announced 5.X.13 with list of changes since 5.X.12.
If only I knew what it was before!pemasu wrote:Since Calibre is already in pet_packages-exprimo, I have believed so. Use Sfs Apps Loader icon.
Thanks!
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
I am getting this pop-up error but no way to address it (there is no "Checkbox at the bottom").edoc wrote:If only I knew what it was before!pemasu wrote:Since Calibre is already in pet_packages-exprimo, I have believed so. Use Sfs Apps Loader icon.
Thanks!
You need to set locale to UTF-8. Desktop->Country Settings->
Chooselocale country localizations (Checkbox at the Bottom)
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
Silly me I was thinking that the error message was referring to something inside of the Calibre app ...
Anyhow, that worked ...
Calibre flagged a Update and when selected -- without asking first -- installed FireFTP (not cool).
I am not sure if it downloaded the update or not as it opened a Web page with the SUDO code and a bunch of other content along with the FireFTP tab.
The app looks good and I will try to test it later ... gotta run to an evening activity ...
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
I dont think so that calibre downloaded FireFTP. It is preinstalled in my used Firefox package. It probably popped up somehow.
But Calibre truly seems to autoupdate itself. Not sure if that FireFTP popping up is somehow related to the update...or not.
I did have FireFTP already in use....so I cant be sure.
If ppl didnt know...I have included FireFTP, Flashblock and Adblock. You just need to open extensions and enable them or it.
But Calibre truly seems to autoupdate itself. Not sure if that FireFTP popping up is somehow related to the update...or not.
I did have FireFTP already in use....so I cant be sure.
If ppl didnt know...I have included FireFTP, Flashblock and Adblock. You just need to open extensions and enable them or it.
CPU frequency scaling utility works in this version of Slacko on thepemasu wrote:Wcpu-freq has been downgraded to the non 3.X supported version, not sure if it makes difference to Billtoo.
athlon processor.
- Attachments
-
- cpuscrn.jpg
- (75.23 KiB) Downloaded 609 times
Billtoo.
Could you upload that script. Just add .gz to the name and upload it.
I would like to diff it.
Code: Select all
# which wcpufreq
/usr/sbin/wcpufreq
I would like to diff it.
pemasu wrote:Billtoo.Could you upload that script. Just add .gz to the name and upload it.Code: Select all
# which wcpufreq /usr/sbin/wcpufreq
I would like to diff it.
- Attachments
-
- wcpufreq.gz
- (23.68 KiB) Downloaded 209 times
Problem with SaveFiles
Hi pemasu & All,
First off, frisbee working flawlessly using wifi over several reboots.
5X13-reupload does not have a problem creating a SaveFile, nor recognizing the SaveFile created with the initial 5x13, after its name was changed to squeezesave, nor for that matter the squeezesave file created in 5x9. The problem is that when there is a choice of which SaveFiles to use at bootup, or even if there is only the 5x9 SaveFile and the question appears whether to upgrade it to 5x13, the keyboard becomes unresponsive, the system hangs, and the only way to move forward is to pull the plug.
Note my system uses a keyboard plugged into a USB port, but by now that is pretty standard.
This is not a 'deal-breaker' for me. I was just being lazy, trying to avoid having to rebuild my usual system. But I think there may still be some puppians --perhaps with limited computing resources-- who prefer having different SaveFile configurations and choosing which to boot up in accordance with their current needs.
I recall having a similar problem recently, but don't recall which puplet I was testing.
mikesLr
First off, frisbee working flawlessly using wifi over several reboots.
5X13-reupload does not have a problem creating a SaveFile, nor recognizing the SaveFile created with the initial 5x13, after its name was changed to squeezesave, nor for that matter the squeezesave file created in 5x9. The problem is that when there is a choice of which SaveFiles to use at bootup, or even if there is only the 5x9 SaveFile and the question appears whether to upgrade it to 5x13, the keyboard becomes unresponsive, the system hangs, and the only way to move forward is to pull the plug.
Note my system uses a keyboard plugged into a USB port, but by now that is pretty standard.
This is not a 'deal-breaker' for me. I was just being lazy, trying to avoid having to rebuild my usual system. But I think there may still be some puppians --perhaps with limited computing resources-- who prefer having different SaveFile configurations and choosing which to boot up in accordance with their current needs.
I recall having a similar problem recently, but don't recall which puplet I was testing.
mikesLr
liggiomm and licurl-gnutls
Tried installing qtractor, hydrogen and guitarix2, from .debs,
but hydro needed libcurl-gnutls.so.4 and guitarix2 and
qtractor both needed libgiomm (other main dependencies are likely
met although more may be out there))
neither seems to be an easy dependency to solve.
Not expecting a solution, but mention it in case someone
else has a more mainstream application needing one of those,
and I could get lucky. (I can use those apps elesewhere, so
don't want to waste anyones valuable time.)
V5.X.8
but hydro needed libcurl-gnutls.so.4 and guitarix2 and
qtractor both needed libgiomm (other main dependencies are likely
met although more may be out there))
neither seems to be an easy dependency to solve.
Not expecting a solution, but mention it in case someone
else has a more mainstream application needing one of those,
and I could get lucky. (I can use those apps elesewhere, so
don't want to waste anyones valuable time.)
V5.X.8
Billtoo. There were more differences than just the conditional checking of new modules location in 3.X kernels.
Have you tested that 0.9 version script in Exprimo. Does it work if you replace that script and reboot and launch cpufreq from menu or from console.
The whole cpufreq is just that script. The other stuff in pet is just for menu entry.
Mikeslr. Thank you of your report. It includes same elements than SoundNICK`s earlier bug reports.
The problem. I use init script from woof. So the bootup recognizing is as Barry K has designed it. The difference and problems probably comes how usb section has been configured in kernel. And what might change the bootup usb detection and loading. It would need recompile....building new puplet...testing....recompiling...etc.
I believe I will let it be at this stage with 2.6.39.4 kernel. My next step will to continue with 3.X kernels.
Have you tested that 0.9 version script in Exprimo. Does it work if you replace that script and reboot and launch cpufreq from menu or from console.
The whole cpufreq is just that script. The other stuff in pet is just for menu entry.
Mikeslr. Thank you of your report. It includes same elements than SoundNICK`s earlier bug reports.
The problem. I use init script from woof. So the bootup recognizing is as Barry K has designed it. The difference and problems probably comes how usb section has been configured in kernel. And what might change the bootup usb detection and loading. It would need recompile....building new puplet...testing....recompiling...etc.
I believe I will let it be at this stage with 2.6.39.4 kernel. My next step will to continue with 3.X kernels.
I copied the script and rebooted, then ran the cpu frequency utiltiy and the k8 option was there, it's working now.pemasu wrote:Billtoo. There were more differences than just the conditional checking of new modules location in 3.X kernels.
Have you tested that 0.9 version script in Exprimo. Does it work if you replace that script and reboot and launch cpufreq from menu or from console.
The whole cpufreq is just that script. The other stuff in pet is just for menu entry.
The ati proprietary driver seemed to be working okay yesterday but when I booted up this morning it wasn't working.I reran the installer and rebooted, again it seemed to be working okay but if I log out and run xwin X won't start.If I choose fglrx from the xorgwizard it won't start either.
- Attachments
-
- cpufscrn.jpg
- (120.95 KiB) Downloaded 502 times
Billtoo. Thank you of confirmation. I will update to that 0.91 version of cpufreq. It is usable with 3.X kernels also.
About fglrx. That will be tricky. One possible conflict. You can try
#modprobe -r dri radeon and then try to load fglrx kernel module manually also
#modprobe fglrx.
#aticonfig --initial --input=/etc/X11/xorg.conf
above does not hurt also
Xorgwizard only loads xorg driver fglrx.so (something like that) and there is need for kernel module fglrx also.
About fglrx. That will be tricky. One possible conflict. You can try
#modprobe -r dri radeon and then try to load fglrx kernel module manually also
#modprobe fglrx.
#aticonfig --initial --input=/etc/X11/xorg.conf
above does not hurt also
Xorgwizard only loads xorg driver fglrx.so (something like that) and there is need for kernel module fglrx also.
I got sidetracked badly today...when I saw announcement in murga-linux about new peazip. So...I downloaded the portable version....hacked somewhat existing launching scripts...created rox right clicks...added mime link to several archive mimes and created a pet of it.
I would call it hole in one peazip-portable-4.4. More mime extensions can be added. There is 130 formats peazip support now...even .pet .deb .rpm and the whole usual set including .iso support.
The pet has also menu entry to launch it from menu > utility > peazip. Or from console with peazip
Five rox right clicks included with proper rox right click implementation. Mime association to 17 mime types. Much more can be added.
Those who didnt know...Peazip has graphical interface.
http://www.peazip.org/peazip-free-archiver.html
http://www.smokey01.com/pemasu/pet_pack ... le-4.4.pet
Okay...my package is not exclusively tested. I extracted .pet .zip and tar.gz
I would call it hole in one peazip-portable-4.4. More mime extensions can be added. There is 130 formats peazip support now...even .pet .deb .rpm and the whole usual set including .iso support.
The pet has also menu entry to launch it from menu > utility > peazip. Or from console with peazip
Five rox right clicks included with proper rox right click implementation. Mime association to 17 mime types. Much more can be added.
Those who didnt know...Peazip has graphical interface.
http://www.peazip.org/peazip-free-archiver.html
http://www.smokey01.com/pemasu/pet_pack ... le-4.4.pet
Okay...my package is not exclusively tested. I extracted .pet .zip and tar.gz
Would you put in the newest quick launch 2.5 ?
I've fixed some minor bugs. I'm still working on bacon recorder.
http://www.murga-linux.com/puppy/viewto ... 582#601582
_________________________________________
I've fixed some minor bugs. I'm still working on bacon recorder.
http://www.murga-linux.com/puppy/viewto ... 582#601582
_________________________________________
I launched once again PupServer-435 which offers oob filesharing with samba server and cifs mounted shares.
The mount point is /mnt/network/PUPSERVER/usr=root passwd=woofwoof
The space in mount name fools puppy rc.shutdown script.
I tested this: umount -a -t cifs and yes...the umount did work. The cifs-shared folder content vanished.
So...adding this to the /etc/rc.d/rc.shutdown script and you get samba shares unmounted when shutting down.
Why to do that. Tubeguy posted that shutting down hangs several minutes when he had connected with pnethood to the PupServer-435. I can confirm that.
The mount point is /mnt/network/PUPSERVER/usr=root passwd=woofwoof
The space in mount name fools puppy rc.shutdown script.
I tested this: umount -a -t cifs and yes...the umount did work. The cifs-shared folder content vanished.
So...adding this to the /etc/rc.d/rc.shutdown script and you get samba shares unmounted when shutting down.
Why to do that. Tubeguy posted that shutting down hangs several minutes when he had connected with pnethood to the PupServer-435. I can confirm that.