PupSnap-2.6
PupSnap-1.4
Version 1.4. See main post.
-Improved access to reduced-size (thumbnail) image acquisitions.
-Bug fix: jpg images were not captured at optimal resolution in prior versions. Please update to PupSnap-1.4.
-Improved access to reduced-size (thumbnail) image acquisitions.
-Bug fix: jpg images were not captured at optimal resolution in prior versions. Please update to PupSnap-1.4.
I like this.
cp /usr/local/PupSnap/pupsnap2.rc /usr/local/PupSnap/pupsnap.rc
will easily solve the conf problem.
I found typing in file name every time troublesome so i did this
cp /usr/local/PupSnap/pupsnap2.rc /usr/local/PupSnap/pupsnap.rc
will easily solve the conf problem.
I found typing in file name every time troublesome so i did this
Code: Select all
if [ "$FILENAME"= "" ]
then
FILENAME=picture
fi
num=1
while [ -f "$FOLDERNAME""$FILENAME"."$FILETYPE" ]
do
FILENAME="$(echo picture"$num")"
let num=num+1
done
Good idea, but I don't know where to add the code. Adding it to the bottom of /usr/local/PupSnap/pupsnap.rc did nothing.r1tz wrote:I like this.
cp /usr/local/PupSnap/pupsnap2.rc /usr/local/PupSnap/pupsnap.rc
will easily solve the conf problem.
I found typing in file name every time troublesome so i did thisCode: Select all
if [ "$FILENAME"= "" ] then FILENAME=picture fi num=1 while [ -f "$FOLDERNAME""$FILENAME"."$FILETYPE" ] do FILENAME="$(echo picture"$num")" let num=num+1 done
Thanks,
Jim
Hi r1tz,r1tz wrote:I like this.
cp /usr/local/PupSnap/pupsnap2.rc /usr/local/PupSnap/pupsnap.rc
will easily solve the conf problem.
I found typing in file name every time troublesome so i did thisCode: Select all
if [ "$FILENAME"= "" ] then FILENAME=picture fi num=1 while [ -f "$FOLDERNAME""$FILENAME"."$FILETYPE" ] do FILENAME="$(echo picture"$num")" let num=num+1 done
Thanks for the suggestion. I'll see what I can do.
- abushcrafter
- Posts: 1418
- Joined: Fri 30 Oct 2009, 16:57
- Location: England
- Contact:
Some recommendations and bugs:
- If one forgets to enter file name and has the thumbnail check box ticked. It does not remember that the thumbnail check box is ticked.
- Please use a "&" at the end of the error sound command. I have one that is a few secs long.
- What about the default location being "/tmp"?
- Change window title to "PupShots" from "PS".
- "Help" tab be renamed to "About/Help/Config".
- Default image format of PNG instead of JPG.
- Option to use Date & Time for file name. Here is a date command you can use:
Code: Select all
date +%F_%R:%S
[url=http://www.adobe.com/flashplatform/]adobe flash is rubbish![/url]
My Quote:"Humans are stupid, though some are clever but stupid." http://www.dependent.de/media/audio/mp3/System_Syn_Heres_to_You.zip http://www.systemsyn.com/
My Quote:"Humans are stupid, though some are clever but stupid." http://www.dependent.de/media/audio/mp3/System_Syn_Heres_to_You.zip http://www.systemsyn.com/
The next release of PupSnap should address 1, 2, 6 and 7 above. However, 3, 4 and 5 will not change for now.abushcrafter wrote:Some recommendations and bugs:
- [1]If one forgets to enter file name and has the thumbnail check box ticked. It does not remember that the thumbnail check box is ticked.
[2]Please use a "&" at the end of the error sound command. I have one that is a few secs long.
[3]What about the default location being "/tmp"?
[4]Change window title to "PupShots" from "PS".
[5]"Help" tab be renamed to "About/Help/Config".
[6]Default image format of PNG instead of JPG.
[7]Option to use Date & Time for file name. Here is a date command you can use:Code: Select all
date +%F_%R:%S
I'll upload the new version later today.
Thanks for your suggestions.
You add it in func somewhere at the top just before the xdialog line.Jim1911 wrote:Good idea, but I don't know where to add the code. Adding it to the bottom of /usr/local/PupSnap/pupsnap.rc did nothing.r1tz wrote:I like this.
cp /usr/local/PupSnap/pupsnap2.rc /usr/local/PupSnap/pupsnap.rc
will easily solve the conf problem.
I found typing in file name every time troublesome so i did thisCode: Select all
if [ "$FILENAME"= "" ] then FILENAME=picture fi num=1 while [ -f "$FOLDERNAME""$FILENAME"."$FILETYPE" ] do FILENAME="$(echo picture"$num")" let num=num+1 done
Thanks,
Jim
i added this behind so i can just link people to the image in a jippy. xclip default setting it to "copy" to middle click.ERROR="aplay /usr/share/audio/error.wav"
[ "$FILENAME" = "" ] && $ERROR && Xdialog --title Alert --no-cancel --msgbox "Please enter a file name!" 0 0 && $WORKDIR/PupSnap && exit 0
echo "http://q.r1tz.operaunite.com/file_shari ... E}""|xclip
Initially, i was thinking of adding a script to upload to imagebin.
Version 1.5 See main post.
-Added option to apply current date and time to the image file name. (thanks abushcrafter)
-When a new name is not selected for the File Name entry box, the capture proceeds with automatic sequential naming of images. (thanks r1tz)
-The most recent capture is now the default entry for the File Name.
-Added option to apply current date and time to the image file name. (thanks abushcrafter)
-When a new name is not selected for the File Name entry box, the capture proceeds with automatic sequential naming of images. (thanks r1tz)
-The most recent capture is now the default entry for the File Name.
Last edited by radky on Thu 03 Mar 2011, 22:26, edited 1 time in total.
- abushcrafter
- Posts: 1418
- Joined: Fri 30 Oct 2009, 16:57
- Location: England
- Contact:
I have thought of another recommendation. Add Image Magick "display" to the image viewer list.
[url=http://www.adobe.com/flashplatform/]adobe flash is rubbish![/url]
My Quote:"Humans are stupid, though some are clever but stupid." http://www.dependent.de/media/audio/mp3/System_Syn_Heres_to_You.zip http://www.systemsyn.com/
My Quote:"Humans are stupid, though some are clever but stupid." http://www.dependent.de/media/audio/mp3/System_Syn_Heres_to_You.zip http://www.systemsyn.com/
Hi abushcrafter,abushcrafter wrote:I have thought of another recommendation. Add Image Magick "display" to the image viewer list.
If an image viewer or editor is not currently supported by PupSnap, you can manually add the name of the executable to the appropriate combobox (with path and switches if needed). This new viewer or editor selection will remain your default choice until you decide to change it.
Thanks for the recommendation.
- abushcrafter
- Posts: 1418
- Joined: Fri 30 Oct 2009, 16:57
- Location: England
- Contact:
Thanks. Nice feature.radky wrote:If an image viewer or editor is not currently supported by PupSnap, you can manually add the name of the executable to the appropriate combobox (with path and switches if needed). This new viewer or editor selection will remain your default choice until you decide to change it.
[url=http://www.adobe.com/flashplatform/]adobe flash is rubbish![/url]
My Quote:"Humans are stupid, though some are clever but stupid." http://www.dependent.de/media/audio/mp3/System_Syn_Heres_to_You.zip http://www.systemsyn.com/
My Quote:"Humans are stupid, though some are clever but stupid." http://www.dependent.de/media/audio/mp3/System_Syn_Heres_to_You.zip http://www.systemsyn.com/
Empty file
Hi radky,
A number of times I've had problems with the forum reporting that I was trying to upload an empty file and refused to post. This morning I tried to upload these two images made with PupSnap that are on the image made with mt-paint snapshot. Weird!
A number of times I've had problems with the forum reporting that I was trying to upload an empty file and refused to post. This morning I tried to upload these two images made with PupSnap that are on the image made with mt-paint snapshot. Weird!
Re: Empty file
Hi Jim,Jim1911 wrote:Hi radky,
A number of times I've had problems with the forum reporting that I was trying to upload an empty file and refused to post. This morning I tried to upload these two images made with PupSnap that are on the image made with mt-paint snapshot. Weird!
In PupSnap, the File-Quality setting of 100 (least compression) may seem ideal for those who want to capture an image at maximum quality. However, when posting an image to the Murga forum, a full screen that is captured with no significant image compression may exceed the forum limits for image size.
On my system, a basic 1920x1080 full-screen image captured in PNG format with the File-Quality setting of 100 (6086K) will not upload to the forum. However, the same PNG image captured at the File-Quality setting of 50 (48K), will upload quickly, and the image looks very good when viewed as a link to the primary forum post. File compression in the PNG format is ‘lossless’ and image quality is preserved.
When capturing PNG images with PupSnap (i.e. with Scrot and the imlib2 library), the file size (in kilobytes) does not reduce significantly at File-Quality settings of 95 or 90, but drops dramatically at 85 (and below). You may have noticed that mtPaint and GIMP initially default to the maximum compression value of '9' when images are saved in the PNG format. At this numerical setting, the size of the mtPaint file (or GIMP file) is identical to the same image captured in PupSnap with the File-Quality setting of 50. The following quote is from the GIMP help file: “Since compression in the PNG format is not lossy, the only reason to use a compression level less than 9, is if it takes too long to compress a file on a slow computer." Consequently, when capturing PNG images in PupSnap, I would recommend the File-Quality setting of 50, which correlates with the maximum compression level of 9 in both mtpaint and GIMP. This will produce an image of high quality and convenient size (in kilobytes).
On the other hand, if the goal is to display an image of large dimension on the primary forum page (without linking), you can use a bitmap editor to crop the image, or downsize by pixel interpolation. A maximum image size of 600 pixels should satisfy the forum criteria for direct image viewing. Alternatively, you can use the Region (ROI) capture mode of PupSnap to limit the size of the captured image, or you may want to experiment with the PupSnap Thumbnail feature, which permits automatic downsizing of large images at the time of capture.
Thanks for your question.
Interesting approach to screen/active window copy
I thought I'd try your product. I have been looking for a Linux alternative to MS for a long while.
In OS2, then Microsoft, I could copy a Window (Ctrl-"Print Screen" key) or I could copy the Screen surface ("Print Screen" key). I have not found a Puppy solution to this. And am anxious to dive in to your PET to see if.
But, I have an installation issue that arose and though awareness might help.
When I 1st attempted to install, I initially got an error (see screen below). Then, I tried a 2nd time and get package message of "Success..." (also below) I don't know why, and thought to ask if there is some additional thing i can provide you so that you would know why the installation issue that occurred.
Hope this helps
In OS2, then Microsoft, I could copy a Window (Ctrl-"Print Screen" key) or I could copy the Screen surface ("Print Screen" key). I have not found a Puppy solution to this. And am anxious to dive in to your PET to see if.
But, I have an installation issue that arose and though awareness might help.
When I 1st attempted to install, I initially got an error (see screen below). Then, I tried a 2nd time and get package message of "Success..." (also below) I don't know why, and thought to ask if there is some additional thing i can provide you so that you would know why the installation issue that occurred.
Hope this helps
- Attachments
-
- PupSnap screen error-1.png
- Installation Starts
- (40.57 KiB) Downloaded 2024 times
-
- PupSnap screen error-2.png
- Installation Failure
- (13.7 KiB) Downloaded 1657 times
-
- PupSnap screen error-3.png
- Installation Success
- (30.53 KiB) Downloaded 1674 times
Re: Interesting approach to screen/active window copy
Hi gcmartin,gcmartin wrote:When I 1st attempted to install, I initially got an error (see screen below). Then, I tried a 2nd time and get package message of "Success..." (also below) I don't know why, and thought to ask if there is some additional thing i can provide you so that you would know why the installation issue that occurred.
Hope this helps
Thanks for evaluating the 64-bit version of Pupsnap.
In weeks of testing multiple versions of PupSnap, I have not personally observed a failed installation of the pet.
In the case of Fatdog64, Pupsnap runs an initial pinstall script which adds the Ctrl+Shift+S hotkey to /root/.config/openbox/rc.xml, and this has been very reliable in my testing. Other than that, the Pupsnap installation is rather routine.
Hopefully, your case will be a one-time misadventure.
PupSnap-1.6
Version 1.6. See main post.
-Enhanced design of the PupSnap Setup GUI.
-Enhanced tooltip Help resources.
-Enhanced launch wrapper to allow automatic recovery from aborted PupSnap sessions.
-Added single-click access to file management (ROX-Filer, Thunar, Xfe).
-Added auto-refresh of the image viewer (Precludes multiple, overlapping instances of the default viewer).
-Added auto-detection of image deletion (Click the View button and PupSnap searches for the most recent
screen capture. If that image has been deleted, the search continues for other images in the current folder).
-Enhanced design of the PupSnap Setup GUI.
-Enhanced tooltip Help resources.
-Enhanced launch wrapper to allow automatic recovery from aborted PupSnap sessions.
-Added single-click access to file management (ROX-Filer, Thunar, Xfe).
-Added auto-refresh of the image viewer (Precludes multiple, overlapping instances of the default viewer).
-Added auto-detection of image deletion (Click the View button and PupSnap searches for the most recent
screen capture. If that image has been deleted, the search continues for other images in the current folder).
Hi bleepingbeep,bleepingbeep wrote:The new version is working fine for me (running Lucid 5.2.5). Thanks for this tool -- I love it.
The only issue I have is this: When viewing an image in Viewnior (the default picture viewer), I'd like to be able to capture/crop a portion of it using PupSnap. But when I invoke it with Ctrl-Shift-S, Viewnior and the picture disappear before I can mark the capture area.
This does NOT happen if I'm using Gimp, mtPaint, etc.
Anyone else encounter this or have a fix? Thanks.
1 - With each screen capture, the PupSnap GUI and default viewer (if open) will disappear immediately prior to the capture, then both will reappear after the capture.
2 - To capture a small ‘cropped’ area of the screen, go to the ‘Region’ tab of PupSnap, and select Save. Then use the mouse to outline a rectangular region that you wish to capture.
3 - Subsequently, when the captured image is displayed in Viewnior, if you wish to crop the image even more, do the following:
Code: Select all
Go to the ‘Image’ menu of Viewnior, then select the ‘Crop’ option. In the new dialog box, use the mouse to outline the area of interest in the image, then click the ‘Crop’ button in the lower right corner.
Thanks for your question.