(old)Puppy Linux Discussion Forum

Hello Kirk,

True that I compiled in final, of course with the final-devx, and tested in a fd64-final on stick without devx, both work.

Then I used this install on fd64-rc, with the appropiate devx.

And I also compared ldd between rc and final, and they are exactly the same, and no missing libs.

Weird eh? Maybe I should compile on the fd64 install. Something I try to avoid normally, I depend on it for work.

Could it be that the RC- devx is missing something?

PET update:
a) ddrescue uploaded (requested by gcmartin)
b) evince updated (now should handle URL properly instead of bailing out with errors) - thanks to technosaurus for this gtk_show_uri replacement.
cheers!

Hey Kirk or Jamesbond,

For S&G's I tried installing the Filezilla pet from the Lucid pet share on ibiblio (http://distro.ibiblio.org/pub/linux/dis ... -Lucid.pet).

The pet creates a launch icon under the "Network" group. Clicking on the icon doesn't do anything, so I opened up URXVT and entered 'filezilla' and got:

filezilla: error while loading shared libraries: libtasn1.so.3: cannot open shared object file: No such file or directory

Also tried installing the Wireshark 1.6.0 pet from:
http://www.murga-linux.com/puppy/viewtopic.php?t=65941
and got:

wireshark: error while loading shared libraries: libpcap.so.0.8: cannot open shared object file: No such file or directory

I don't mind chasing down libs, but didn't know if you guys had a better/easier way to approach?

As always, thanks!
Joe

Joe,
All puppies other than Fatdog64 and Lighthouse64 are 32-bit. Their pets are not compatible and will not work with Fatdog64.
...
...
Unless, you install the 32-bit compatibility library.
...
...
But please bear in mind that the 32-bit compatibility library is based on Wary 5.0. If the pet you're trying to use doesn't work in Wary 5.0, there is little chance it will work under 32-bit compatibility library for Fatdog64 too.

You will have better chance using 64-bit Debian Lenny packages (you still have to chase the libs as Fatdog doesn't have support for apt-get).

cheers!

jamesbond wrote: ...
Unless, you install the 32-bit compatibility library.
...

Thanks Jamesbond. Just to be certain, the Wary-based 32-bit compatibility library is the 'fd64-32bit-libs-6.sfs' module, right?

joe0855 wrote:

jamesbond wrote: ...
Unless, you install the 32-bit compatibility library.
...

Thanks Jamesbond. Just to be certain, the Wary-based 32-bit compatibility library is the 'fd64-32bit-libs-6.sfs' module, right?

Sorry for the late response, but yes, that's the one.

cheers!

I have been trying to process some video in Pburn with this error...


Pburn version 3.3.7

###################################################
COMMAND:
###################################################
cd "/root/my-documents/tmp/pburn_tmp/"
ffmpeg -i "01_myvideo_D1.mpg" -aspect 16:9 -target pal-dvd 101.mpg
dvdauthor -o /root/my-documents/tmp/pburn-DVD -x /root/.pburn/tmp/dvdauthor
growisofs -use-the-force-luke=notray -dvd-compat -Z /dev/sr0 -dvd-video /root/my-documents/tmp/pburn-DVD

###################################################
OUTPUT:
###################################################
ffmpeg: error while loading shared libraries: libfaac.so.0: wrong ELF class: ELFCLASS32
DVDAuthor::dvdauthor, version 0.6.14.
Build options: gnugetopt iconv freetype


Also note that the latest versions of Pburn require gtkdialog 0.8 - a 64 bit pet would be helpful

Regards C Bumkin

First, I want to thank the developers of FatDog. It's the best Pup I've used. Running 520 on an amd64 with 4g of ram. Have a ntfs hard drive for the save files. Almost everything is great.

The issue I'm having relates to frisbee addressing the ip adaptor. After it's done, after it reports that the ip address is aquired, the tray disappears. This happens almost 100% of the time. I have to exit to the console and type 'xwin' to get the tray to reappear. After this it will stay until the inet adaptor gets readdressed. The tray is at the top of the desktop. I'm using openbox.

I tried the tip below hoping that would alter the behavior, but because I don't have a wifi card frisbee has that entire dialog grayed out, and I cannot uncheck the 'enable' box.

I looked at all the scripts I could find but didn't see any place where I could change that setup. Hope someone has the fix for this.

Thanks again to all who put FatDog together.

800 Michael

kirk wrote:

The Puppy Linux dog icon popping up upon start up stating your network status drives me crazy.

To disable, open Frisbee and un-check "Enable pup up notifications".

Working on a Dell Studio XPS.

Bitch of a laptop.

Goes straight to desktop.
Fails in Slacko.....PITA. >> Nvidia

"""""""

I had to enable the sound in Alsamixer????

Go to >> Alsa Equaliser >> currently off >>> Click on.

Do you want Alsa Equaliser turned on...
Do you want to run >>Alsa Equaliser >> click OK

""""""""""""

2x Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz\

Memory 3795MB (289MB used)

Network controller Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)

Board
Name 0K183D
Vendor Dell Inc. (Dell Computer, www.dell.com)

Eth0 Ethernetr forcedeth pci Nvidia Device unknown

Eth1 Wireless wl pci Broadcom device unknown

You must >> add the module to the list.

""""""""""""

Chris.

Torrent for Fatdog64-520

Download, unzip and open with your torrent handler of choice.

Erroneous post.
Re-Posted to FATDOG 5.21

Country Bumkin wrote:I have been trying to process some video in Pburn with this error...

Also note that the latest versions of Pburn require gtkdialog 0.8 - a 64 bit pet would be helpful

Regards C Bumkin

It seems to be the only software to be able to claim to be able to burn cue/bin combo (which in fact it does not yet)

It works on FD64 with help of:

http://files.myopera.com/jpline/blog/gt ... x86_64.pet

sebus

ok it says this is the final version will any more versions of fatdog be continued from this one.

521 already exists

http://www.murga-linux.com/puppy/viewtopic.php?t=72483

Aitch