Lucid Puppy 5.0.1 - 24 May 2010
sound configuration in lupu 501. follow up from previous.
tried a lot of things after seeing a suggestion for alsaconfig.
opened pmusic and instead of alsaconfig found an option for zmixer.
clicked on it and got a almost empty yer pants out scared, when the music i had playing in pmusic began to play loudly and immediately.
(crazy by arrowsmith)
do not know what i did, but, as i suspected, it is not a bug in the program but in me.
gxine does play but at a much lower level than pmusic.
will need to play with settings myself, but i wanted to drop this note to say that the problem was me and not the operating system.
btw, both pup 431 bcm4312v3.iso, and fatdog64 beta 3 work great on this machine.
thanks, everyone....GREAT JOB!
tried a lot of things after seeing a suggestion for alsaconfig.
opened pmusic and instead of alsaconfig found an option for zmixer.
clicked on it and got a almost empty yer pants out scared, when the music i had playing in pmusic began to play loudly and immediately.
(crazy by arrowsmith)
do not know what i did, but, as i suspected, it is not a bug in the program but in me.
gxine does play but at a much lower level than pmusic.
will need to play with settings myself, but i wanted to drop this note to say that the problem was me and not the operating system.
btw, both pup 431 bcm4312v3.iso, and fatdog64 beta 3 work great on this machine.
thanks, everyone....GREAT JOB!
Toshiba Satellite S 50-A, intel i7,8G ram, Intel wireless N 7260 card. Nvidia GeForce GT 740M Video.
-
- Posts: 21
- Joined: Wed 12 Aug 2009, 16:30
Network connect
On my netbook, HP 110NR W/4312 Broadcom. Once Puppy left the 30.5 kernel, (I used to use Technosauras- 30.5 pet, on various Puppy's. Except Fatdog, Kirk wrote in script for it in his build. Newer kernel support incliuded, seems to be there already in Quirky, Lucid and other builds, I use a laptop as well, don't remember which vareity Puppy on which but pretty sure alll worked on the netbook w/newer kernel. b43 shows immediately, on firing up the Network Wizard, click on b43, click wlan, and go.Inv.Man
- Abnormalter
- Posts: 95
- Joined: Sun 31 Jan 2010, 10:56
- Location: Russia
Summary: Lucid Puppy 5 don't compatible with ASUS eeePC 900
As summary... Workedn't ulimatly on my devece this subsystems:
1. Sound card (Alsa cannot setuped it).
2. Battary wather (Tray Applet permanently says: "Battary charging: capacity = 1%").
I'm think, it's a kernel 2.6.33.2 incompatible, because beethwen 2.6.25 and 2.6.30 kernels any devices, include WiFi on eeePC, worked fine...
I was deinstall Lupu 5.01 now from my eeePC because functionalles it.
1. Sound card (Alsa cannot setuped it).
2. Battary wather (Tray Applet permanently says: "Battary charging: capacity = 1%").
I'm think, it's a kernel 2.6.33.2 incompatible, because beethwen 2.6.25 and 2.6.30 kernels any devices, include WiFi on eeePC, worked fine...
I was deinstall Lupu 5.01 now from my eeePC because functionalles it.
Is it possible to do the following in any of the Browsers in Lucid 5.00?
1. Allow access to only a few specific URL's (no way to bypass or to use an intermediary URL to break-out)?
2. Lock History so that it requires a password to delete?
Also, to restrict pop-ups and images in E-mail to specific SENDER addresses?
1. Allow access to only a few specific URL's (no way to bypass or to use an intermediary URL to break-out)?
2. Lock History so that it requires a password to delete?
Also, to restrict pop-ups and images in E-mail to specific SENDER addresses?
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
four Core Boot Issue
When I unleash my AMD dual core I have problems getting iso's to boot. Only Lucid boots up freely.
I noticed that Lucid has nosmp in the boot menu and thought that strange in a multi-core machine. I removed nosmp from the menulist and lo and behold Lucid would't boot. Disabled two cores, booted and re-installed nosmp to lucid and V3 in menulist. Rebooted with all 4 cores enabled and lucid and V3 both booted. Still will not work with booting from dvd in 4 core. For that matter Windows 7 will not boot either.
PS. lost the on screen menu (right click) and how do I regain it?
Having lots of fun
I noticed that Lucid has nosmp in the boot menu and thought that strange in a multi-core machine. I removed nosmp from the menulist and lo and behold Lucid would't boot. Disabled two cores, booted and re-installed nosmp to lucid and V3 in menulist. Rebooted with all 4 cores enabled and lucid and V3 both booted. Still will not work with booting from dvd in 4 core. For that matter Windows 7 will not boot either.
PS. lost the on screen menu (right click) and how do I regain it?
Having lots of fun
- Abnormalter
- Posts: 95
- Joined: Sun 31 Jan 2010, 10:56
- Location: Russia
In lupu 5.00 mount sda1 SDD with NTFS happens ro rights
In lupu 5.00 mount sda1 SDD with NTFS happens "ro" rights. But in lupu 5.01 this bug seems to be fixed.
(In 5.00 it is shown as "rwx ------" of rights to files and folders located on this drive.)
I am interested, how it has been fixed in 5.01?
(Give me a Diff file, responsible for resolving this bug, please.)
(In 5.00 it is shown as "rwx ------" of rights to files and folders located on this drive.)
I am interested, how it has been fixed in 5.01?
(Give me a Diff file, responsible for resolving this bug, please.)
- Attachments
-
- sda1-ntfs-devece-ro-rights!.png
- In lupu 5.00 mount sda1 SDD with NTFS happens ro (!!!)
- (105.95 KiB) Downloaded 493 times
lupu 5.0 - cant install from universe
hope this didnt come before (this thread is growing long) , i unsuccessfully tried to install mantis bugtracker on lupu 5.0.0 .
mantis is in the universe repository and also in the packages file in lupu.
i tried adding universe via ppm and restartet ppm, but it universe was disabled again and the search doesnt find mantis.
help greatly appreciated
flugw
mantis is in the universe repository and also in the packages file in lupu.
i tried adding universe via ppm and restartet ppm, but it universe was disabled again and the search doesnt find mantis.
help greatly appreciated
flugw
Re: lupu 5.0 - cant install from universe
Did you edit the Distro Repo file AND make sure you only have 5 Repos selected?flugwelpe wrote:hope this didnt come before (this thread is growing long) , i unsuccessfully tried to install mantis bugtracker on lupu 5.0.0 .
mantis is in the universe repository and also in the packages file in lupu.
i tried adding universe via ppm and restartet ppm, but it universe was disabled again and the search doesnt find mantis.
help greatly appreciated
flugw
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
Yes reported this in 5.x - very unstable behaviour1)After several clicks over the JPG files in -=Nathan Wallpaper Setter=-, the program becomes temporarily unusable.(Perhaps version of gtk2 creates a problem)
It is most odd - the only way I could get the image I wanted
http://www.murga-linux.com/puppy/viewto ... 807#422807
was to NOT use the usr/share/backgrounds
but direct it elsewhere root/documents/clipart
I wonder if this is anything to do with the two directories background and original_background?
Running Puppy
Linux
-
- Posts: 221
- Joined: Sun 28 Sep 2008, 10:23
- Location: Italy
Hi! I'm happy that Lucid Puppy 5.0.1 came out! I'm testing right now. I'm running it live from usb. I want to ask if anybody is running it live from Usb?
With UNetbootin Lucid Puppy isnt yet reconized (you can't choose last puppy version) so I selected Ubuntu to make Lucid Puppy run from usb and it works.
I've only a problem right now. When I click on the desktop the icon "play" it opens gxine fullscreen and my laptop freeze there and I've to press manually Off botton. I've never like gxine I prefer vlc but it's strange it freeze.
By the way I'm loving Chromium! it's fast like an aeroplane!!
With UNetbootin Lucid Puppy isnt yet reconized (you can't choose last puppy version) so I selected Ubuntu to make Lucid Puppy run from usb and it works.
I've only a problem right now. When I click on the desktop the icon "play" it opens gxine fullscreen and my laptop freeze there and I've to press manually Off botton. I've never like gxine I prefer vlc but it's strange it freeze.
By the way I'm loving Chromium! it's fast like an aeroplane!!
-
- Posts: 221
- Joined: Sun 28 Sep 2008, 10:23
- Location: Italy
I run puppy 5.0.1 from a USB stick.
I downloaded the iso file for 5.0.1, then selected the disk image option in Unetbootin.
also, I change a line in file syslinux.cfg
'append initrd=initrd.gz pmedia=usbflash'
...pmount=usbflash - instead of cd
If you store your puppy save file on USB it makes it boot up faster
---
with regards to having to set Wireless everytime, do you have to just select connect or do you have to reconfigure the whole thing?
I downloaded the iso file for 5.0.1, then selected the disk image option in Unetbootin.
also, I change a line in file syslinux.cfg
'append initrd=initrd.gz pmedia=usbflash'
...pmount=usbflash - instead of cd
If you store your puppy save file on USB it makes it boot up faster
---
with regards to having to set Wireless everytime, do you have to just select connect or do you have to reconfigure the whole thing?
Jumping in to echo the other post ...darkcity wrote:with regards to having to set Wireless everytime, do you have to just select connect or do you have to reconfigure the whole thing?
On one of the older laptops where we have it installed the wifi connection has to be re-established every time the laptop is restarted. (Panasonic Toughbook CF-28)
On that same laptop when he has been viewing YouTube videos (e.f. Transformers) for a little while it will freeze-up requiring a cold restart.
Prior to Lucid 5.0 we had 4.31 on that laptop and it would remember and re-establish.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
firstrun localization (german)
Hi,
here is a changed firstrun-app.
- moved to /usr/local/...
- added localization code and en_US, de_DE files
mave
here is a changed firstrun-app.
- moved to /usr/local/...
- added localization code and en_US, de_DE files
mave
- Attachments
-
- firstrun_LucidPuppy_with_locals.tar.gz
- (2.51 KiB) Downloaded 403 times
Re: lupu 5.0 - cant install from universe
thanks, it was the problem to have only 5 repos - didnt see a note about it anywhere though. So starting the install is fine, but i cant finish it:edoc wrote:Did you edit the Distro Repo file AND make sure you only have 5 Repos selected?flugwelpe wrote: i unsuccessfully tried to install mantis bugtracker on lupu 5.0.0 .
mantis is in the universe repository and also in the packages file in lupu.
i tried adding universe via ppm and restartet ppm, but universe was disabled again and the search doesnt find mantis...
now i'm stuck because there are so many dependencies missing on the missing dependencies check, that i cant see the buttons and pressing enter just freezes the process...
-
- Posts: 221
- Joined: Sun 28 Sep 2008, 10:23
- Location: Italy
thanks for the tip! You said pmount=usbflash but in my syslinux.cfg I've pmedia=cd I changed it in pmedia=usbflash. Is it right? It seems to work for me.darkcity wrote:I run puppy 5.0.1 from a USB stick.
I downloaded the iso file for 5.0.1, then selected the disk image option in Unetbootin.
also, I change a line in file syslinux.cfg
'append initrd=initrd.gz pmedia=usbflash'
...pmount=usbflash - instead of cd
If you store your puppy save file on USB it makes it boot up faster
---
with regards to having to set Wireless everytime, do you have to just select connect or do you have to reconfigure the whole thing?
With wireless each time I've to select from pwireless my wifi network. I'd like to connect by default to my wifi after I open the browser.