EasyOS version 2.3.2, June 22, 2020
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
I am planning to update lots of packages in my fork of OpenEmbedded, especially video, and do a complete recompile. Will update hplip as well.scsijon wrote:Barry,
Can we have hplip updated to at least 3.18.4 if not 3.18.6 (the latest) please, there's quite a few additions and 64bit fixes between 3.12.6 (in easy pyro) and the 3.18 stream (not all of them are listed in the general release notes either).
thanks
Hopefully within the next couple of weeks.
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Ho hum, nothing much happening. Lots of things on the to-do list, however, yesterday I bought a 4TB hard drive, and started copying from my main work drive. 30 hours later, still waiting...
My midi-tower had a 1TB internal drive, and I have been using an external USB 4TB as the main work drive. Convenient, as I can plug it into different computers.
However, it is a bit slow running through the USB, hence the purchase.
I am surprised that it has taken this long. There is about 2.6TB of files on the drive.
After the copy, I will use rsync to keep them synced.
My midi-tower had a 1TB internal drive, and I have been using an external USB 4TB as the main work drive. Convenient, as I can plug it into different computers.
However, it is a bit slow running through the USB, hence the purchase.
I am surprised that it has taken this long. There is about 2.6TB of files on the drive.
After the copy, I will use rsync to keep them synced.
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Progress report:
Have updated many packages in my fork of OpenEmbedded, did a complete compile overnight, and imported the binary packages, 724 of them (full packages, not split) into woofQ.
See blog post:
http://bkhome.org/news/201806/packages- ... y-src.html
The intention now is to get back to developing EasyPak, my idea for universal packages.
Have updated many packages in my fork of OpenEmbedded, did a complete compile overnight, and imported the binary packages, 724 of them (full packages, not split) into woofQ.
See blog post:
http://bkhome.org/news/201806/packages- ... y-src.html
The intention now is to get back to developing EasyPak, my idea for universal packages.
[url]https://bkhome.org/news/[/url]
I originally installed to a 32gb flash drive and used it on a pc with
intel graphics.
I have moved the flash drive to a pc that was using an Nvidia graphics
card which I removed, it is now using the built-in intel graphics:
video-info-glx 1.5.3 Sat 23 Jun 2018 on Easy Pyro64 0.9.4 Linux 4.14.44 x86_64
2.0 VGA compatible controller:
Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product: Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.19.1
dimensions: 1600x900 pixels (423x238 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Desktop
OpenGL core profile version string: 3.3 (Core Profile) Mesa 17.0.7
Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz
Core 0: @1978 1: @2063 2: @2117 3: @1812 MHz
All pets etc. that I installed work fine, the built-in hard drive isn't
accessable but a usb hard drive that I plugged in is.
# mount sda1
mount-FULL: can't find sda1 in /etc/fstab
#
fstab
none /proc proc defaults,noatime 0 0
none /sys sysfs defaults,noatime 0 0
none /dev/pts devpts gid=2,mode=620,noatime 0 0
shmfs /dev/shm tmpfs defaults,noatime 0 0
EDIT: Having hardware problems with this pc, using front usb-3.0 ports somehow screws things up.
intel graphics.
I have moved the flash drive to a pc that was using an Nvidia graphics
card which I removed, it is now using the built-in intel graphics:
video-info-glx 1.5.3 Sat 23 Jun 2018 on Easy Pyro64 0.9.4 Linux 4.14.44 x86_64
2.0 VGA compatible controller:
Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product: Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.19.1
dimensions: 1600x900 pixels (423x238 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Desktop
OpenGL core profile version string: 3.3 (Core Profile) Mesa 17.0.7
Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz
Core 0: @1978 1: @2063 2: @2117 3: @1812 MHz
All pets etc. that I installed work fine, the built-in hard drive isn't
accessable but a usb hard drive that I plugged in is.
# mount sda1
mount-FULL: can't find sda1 in /etc/fstab
#
fstab
none /proc proc defaults,noatime 0 0
none /sys sysfs defaults,noatime 0 0
none /dev/pts devpts gid=2,mode=620,noatime 0 0
shmfs /dev/shm tmpfs defaults,noatime 0 0
EDIT: Having hardware problems with this pc, using front usb-3.0 ports somehow screws things up.
- Attachments
-
- screenshot.jpg
- (51.95 KiB) Downloaded 1927 times
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
I am running EasyOS 0.9.5 right now, will test it a bit more before uploading.
What to expect, well, it is exciting. See these blog posts:
http://bkhome.org/news/201807/improved- ... iners.html
http://bkhome.org/news/201807/petget0-a ... asyos.html
What to expect, well, it is exciting. See these blog posts:
http://bkhome.org/news/201807/improved- ... iners.html
http://bkhome.org/news/201807/petget0-a ... asyos.html
[url]https://bkhome.org/news/[/url]
- Cu Chulinux
- Posts: 59
- Joined: Sun 28 Jan 2018, 18:49
- Location: About 180 degrees from Australia
Is it still possible to create containers? I'm thinking eg. of the case where you would want online banking to be in a completely separate container from everything else you do online. Refresh that container every time you use it and no worries about other online sessions having access to your banking info.
Also, I have mixed success with sound in containers. Is that still an issue?
Edit: nevermind the sound. Looking back through the posts I now remember it's an issue with my computer, not with Easy. I have to manually point it to correct sound output. With you it's looking back a couple years, with me it's a couple weeks.
Also, I have mixed success with sound in containers. Is that still an issue?
Edit: nevermind the sound. Looking back through the posts I now remember it's an issue with my computer, not with Easy. I have to manually point it to correct sound output. With you it's looking back a couple years, with me it's a couple weeks.
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Yes, I am intending to keep the ability to create individual containers for an app.Cu Chulinux wrote:Is it still possible to create containers? I'm thinking eg. of the case where you would want online banking to be in a completely separate container from everything else you do online. Refresh that container every time you use it and no worries about other online sessions having access to your banking info.
Also, I have mixed success with sound in containers. Is that still an issue?
Edit: nevermind the sound. Looking back through the posts I now remember it's an issue with my computer, not with Easy. I have to manually point it to correct sound output. With you it's looking back a couple years, with me it's a couple weeks.
Having everything in one container is a convenience, very simple, but I appreciate you might want to separate out one app into its own container.
Sound is working in containers for me on my midi-tower PC.
[url]https://bkhome.org/news/[/url]
- Cu Chulinux
- Posts: 59
- Joined: Sun 28 Jan 2018, 18:49
- Location: About 180 degrees from Australia
Interesting. Something on the security front you might be interested in Barry, the next release of OpenBSD (6.4 - October/November) will include a new "unveil" function (https://man.openbsd.org/unveil). Not sure why unveil, would have though just veil would have been a more appropriate choice of name. Fundamentally it hides part/all of filesystems, compliments Pledge which hides/restricts processes (prevents programs from doing things outside of where/what they are expected to do).BarryK wrote:I am running EasyOS 0.9.5 right now, will test it a bit more before uploading.
What to expect, well, it is exciting. See these blog posts:
http://bkhome.org/news/201807/improved- ... iners.html
http://bkhome.org/news/201807/petget0-a ... asyos.html
Encouraging and welcome to see all efforts of raising the bar in response to dark hackers refining/extending their efforts.
I'm loving using cwm under OpenBSD. Elegant in its simplicity. Set cwm to leave a gap at the top (bottom/wherever) and drop a date/time + xload into that, and you can still activate desktop clicks when windows are maximised. Left mouse to show/select open windows, right click to show your menu. keybind for your exec key and type the first 2 or 3 letters of whatever you want to run is usually enough to filter down to the unique program name. Awkward at first to become familiar with the keybindings, but soon becomes second nature. And all configured using just a handful of lines in .xinitrc, .cwmrc and .Xdefaults. Somewhat similar keybindings to tmux (work well together). Perhaps a alternative choice to using pekwm and lxpanel in EasyOS.
[size=75]( ͡° ͜ʖ ͡°) :wq[/size]
[url=http://murga-linux.com/puppy/viewtopic.php?p=1028256#1028256][size=75]Fatdog multi-session usb[/url][/size]
[size=75][url=https://hashbang.sh]echo url|sed -e 's/^/(c/' -e 's/$/ hashbang.sh)/'|sh[/url][/size]
[url=http://murga-linux.com/puppy/viewtopic.php?p=1028256#1028256][size=75]Fatdog multi-session usb[/url][/size]
[size=75][url=https://hashbang.sh]echo url|sed -e 's/^/(c/' -e 's/$/ hashbang.sh)/'|sh[/url][/size]
Failures in writing to flash drives
Hello
Last April following this tutorial, I failed several times in trying to write easy-0.8.5-amd64.img.gz with the help of easydd to a couple of flash drives.
I currently can't remember the error messages I got at that time.
In these days I have tried to do it several times with easy-0.9.3-amd64.img.gz and with easy-0.9.4-amd64.img.gz without success.
The ERROR message of my last attempt is in the attachement. At that time I was using Tahrpup6.0.5
I would love to try EasyOS, but it is clear I will need your help to reach my goal.
Because of my poor IT knowledge I could spend years posting useless information about what I have done - trying to help you to help me - but, for the sake of simplicity I will only write the following question:
Would you please mind defining what other data do you need to be able to help me?
I will gladly post it.
Thank you for your time.
Last April following this tutorial, I failed several times in trying to write easy-0.8.5-amd64.img.gz with the help of easydd to a couple of flash drives.
I currently can't remember the error messages I got at that time.
In these days I have tried to do it several times with easy-0.9.3-amd64.img.gz and with easy-0.9.4-amd64.img.gz without success.
The ERROR message of my last attempt is in the attachement. At that time I was using Tahrpup6.0.5
I would love to try EasyOS, but it is clear I will need your help to reach my goal.
Because of my poor IT knowledge I could spend years posting useless information about what I have done - trying to help you to help me - but, for the sake of simplicity I will only write the following question:
Would you please mind defining what other data do you need to be able to help me?
I will gladly post it.
Thank you for your time.
- Attachments
-
- 2017-08-19_23h38.png
- (19.82 KiB) Downloaded 1095 times
Posting from a P4 3Ghz_ASUS P5G41T-M LX3_2G RAM_DVD Write desktop with no internal HDD
Saving my stuff on flash sticks and in external USB HDD
Saving my stuff on flash sticks and in external USB HDD
Simplest way to get round this is to remove the status=progress parameter from the script. No idea why the TahrPup version of dd is misbehaving.
Download the attached version. It just has line 371 edited.
Right click on it to rename and remove the .gz extension.
Then right click again and select Permissions. Just hit enter.
Then just click on it and go. Hopefully it will work for you. Probably easier than replacing dd, but let's see.
Download the attached version. It just has line 371 edited.
Right click on it to rename and remove the .gz extension.
Then right click again and select Permissions. Just hit enter.
Then just click on it and go. Hopefully it will work for you. Probably easier than replacing dd, but let's see.
- Attachments
-
- easydd-2.gz
- Just for testing.
- (12.52 KiB) Downloaded 232 times
-
- Posts: 247
- Joined: Fri 31 Jan 2014, 14:12
pupradio seems to be broken in 0.9.4
When left-clicked in Menu/Multimedia, pupradio doesn't run.
The only way to get it going, is typing pupradio into the padlocked console.
The open-desktop console reports that pupradio
doesn't exist!
Maybe some clever person could look into it and
sort something out.
Regards.
The only way to get it going, is typing pupradio into the padlocked console.
The open-desktop console reports that pupradio
doesn't exist!
Maybe some clever person could look into it and
sort something out.
Regards.
Can't write the EasyOS 0.9.3 to a flash drive
Dear Keef
I'm in the middle of a hectic fortnight and I prefer following your commands when the storm is over.
I haven't yet downloaded the attachment you sent but as a newbie in these things I feel that your instructions deserve being carried out very carefully and must be followed by a pinpoint report of the steps I took.
As soon as I have ended the report, "for sorrow or rejoice" I will post it here.
Thank you very much
I'm in the middle of a hectic fortnight and I prefer following your commands when the storm is over.
I haven't yet downloaded the attachment you sent but as a newbie in these things I feel that your instructions deserve being carried out very carefully and must be followed by a pinpoint report of the steps I took.
As soon as I have ended the report, "for sorrow or rejoice" I will post it here.
Thank you very much
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: Failures in writing to flash drives
There are two possibilities. The 'dd' utility is in the 'coreutils' package and also in the 'busybox' package.Antipodal wrote:Hello
Last April following this tutorial, I failed several times in trying to write easy-0.8.5-amd64.img.gz with the help of easydd to a couple of flash drives.
I currently can't remember the error messages I got at that time.
In these days I have tried to do it several times with easy-0.9.3-amd64.img.gz and with easy-0.9.4-amd64.img.gz without success.
The ERROR message of my last attempt is in the attachement. At that time I was using Tahrpup6.0.5
I would love to try EasyOS, but it is clear I will need your help to reach my goal.
Because of my poor IT knowledge I could spend years posting useless information about what I have done - trying to help you to help me - but, for the sake of simplicity I will only write the following question:
Would you please mind defining what other data do you need to be able to help me?
I will gladly post it.
Thank you for your time.
dd in busybox does not support that commandline option, dd in old versions of coreutils does not support that option.
Most likely, Tahrpup 6.0.5 has an old version of coreutils.
But, yes, it is possible to edit the script and not use that commandline option.
If you have Windows, you can install one of the USB-writer apps, such as Etch:
https://etcher.io/
[url]https://bkhome.org/news/[/url]
But, if you stick with Linux and load up one of the 'majors' like Mint, they thoughtfully provided a graphical utility 'USB Image Writer' which always works. A companion USB Stick Formatter is also provided.If you have Windows, you can install one of the USB-writer apps, such as Etch
Experience suggests it may not be best policy only to rely on a single OS, just as it's not a good idea to rely on a single HD.
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
EasyOS version 0.9.5 is out!
Blog post:
http://bkhome.org/news/201807/easyos-ve ... eased.html
As stated, it is a snapshot of latest ideas, constantly evolving.
Blog post:
http://bkhome.org/news/201807/easyos-ve ... eased.html
As stated, it is a snapshot of latest ideas, constantly evolving.
[url]https://bkhome.org/news/[/url]
Easy 0.9.5
Nice to see it's out as I have been following this containerised development. I have a couple of questions though.BarryK wrote:EasyOS version 0.9.5 is out!
Q1 How can you install packages to the container only? i.e. no visability from outside the container.
Q2 Can you have specific application groups that require applications to be run only in a container? i.e. No direct access to or from outside that container.
And,
Q3 Can we add a third desktop so it can be confirmed container to container isolation has ocurred after a package build or install has taken place from within a container please.
thanks for all the work
ps and is the devx contents available from within the xephyr container or not and can it be set as a yes/no from without a container.
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: Easy 0.9.5
The Xephyr container is a complete desktop, and it should be possible to run the PPM in it and install apps.scsijon wrote:Nice to see it's out as I have been following this containerised development. I have a couple of questions though.BarryK wrote:EasyOS version 0.9.5 is out!
Q1 How can you install packages to the container only? i.e. no visability from outside the container.
Q2 Can you have specific application groups that require applications to be run only in a container? i.e. No direct access to or from outside that container.
And,
Q3 Can we add a third desktop so it can be confirmed container to container isolation has ocurred after a package build or install has taken place from within a container please.
thanks for all the work
ps and is the devx contents available from within the xephyr container or not and can it be set as a yes/no from without a container.
You should be able to add a devx sfs to the Xephyr container. It is /mnt/wkg/containers/desk0. If you place the devx sfs in /mnt/wkg/repository/easy-0.9.5/, then run menu Filesystem -> Easy BootManager, you can choose the devx to load in the desk0 container.
However, desk0 is fairly locked down, and I don't know if compiling will work. You might have to ease up on some of the security settings, in /mnt/wkg/containers/desk0/configuration
Regarding a third desktop, I will have to think about it.
EDIT:
This is all so new, hadn't even tried this before. In the Xephyr desktop, which as I have previously stated is a complete desktop in a container, clicked on the "petget" icon to run the PPM, chose "Firefox" from the "oe-pyro" repo, installed it.
After installation, it was in the "Internet" menu, chose it, Firefox works. Yay!
EDIT:
However, the "sfsget" icon in the Xephyr desktop is not going to work. Well, it can download a devx sfs file, but cannot select it to be loaded in the container.
It is necessary to flip out to the main desktop to download the devx sfs and choose for it to be loaded in a container.
This is another to-do area, will probably have to remove the "sfsget" icon from the xephyr desktop.
[url]https://bkhome.org/news/[/url]