ArtfulPup (& Upup-Bionic-Beaver-RC)

[666philb]

nouveau doesn't work with this card and the 4.9 kernel and i only get the vesa driver even if i install the latest firmware.

upgraded to 4.14 and the nouveau driver loaded.
the nvidia proprietary driver also installed fine

steam works https://youtu.be/VD8KFixFDtw
i think the steam tray icon needs libappindicator1

[peebee]

+4 (see above) has a profile for Light that fixes the Google Certificate Authority and adds Duckduckgo as a search engine. If you have a savefolder with an existing Light profile /root/.light then this will take precedence.

[jrb]

+4 (see above) has a profile for Light that fixes the Google Certificate Authority and adds Duckduckgo as a search engine. If you have a savefolder with an existing Light profile /root/.light then this will take precedence.

Thanks, Is the devx changed?

[foxpup]

+4 (see above) has a profile for Light that fixes the Google Certificate Authority

Works! What did you have to change in the profile?

I forgot to mention that I needed to add iwlwifi-7265D-26.ucode in /lib/firmware/ in my laptop. Dmesg reported that versions 17 up to 26 are good for this kernel.

[peebee]

devx is not changed....

I got Root-R2.crt from a link found at:
https://textslashplain.com/2017/10/23/g ... hority-g3/

You might instead try downloading the R2 GlobalSign Root Certificate directly and then installing it in your Trusted Root Certification Authorities

and then imported it into the Certificate Authority list:

Preferences -> Advanced -> Certificates -> View Certificates -> Authorities -> Import

[foxpup]

Peebee

Thank you to fill me in. I read it, without understanding much . Luckily, the solution isn't too complicated, but still, you have to find out. I had already tried installing certificates from ubuntu repo, but that did not work.

[peebee]

Also available from: https://pki.goog/

with different name but same md5 check

GSR2.crt

[Terry H]

I've been running upupBB-18.04 +4 as frugal install on 32GB SanDisk Flash drive for a couple of days on Dell 3350 Core i3-5005U laptop. All working very well.

Thanks peebee for your excellent work on this project and all your work on puppy development.

Code: Select all

# inxi -Fxz
System:    Host: puppypc25435 Kernel: 4.9.92-lxpup-32-pae i686 (32 bit gcc: 7.3.0) Desktop: JWM 2.3.7
           Distro: UPupBB 18.04
Machine:   Device: laptop System: Dell product: Latitude 3350
           Mobo: Dell model: 0KVTCC v: A00 UEFI: Dell v: A13 date: 01/23/2018
Battery    BAT0: charge: 59.0 Wh 123.3% condition: 47.9/59.0 Wh (81%)
           model: Samsung SDI DELL 6C0FN58 status: Full
CPU:       Dual core Intel Core i3-5005U (-HT-MCP-) cache: 3072 KB
           flags: (lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7982
           clock speeds: max: 2000 MHz 1: 1000 MHz 2: 800 MHz 3: 1700 MHz 4: 600 MHz
Graphics:  Card: Intel HD Graphics 5500 bus-ID: 00:02.0
           Display Server: X.org 1.19.6 drivers: modesetting (unloaded: fbdev,vesa)
           tty size: 149x38 Advanced Data: N/A for root
Audio:     Card-1 Intel Wildcat Point-LP High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
           Card-2 Intel Broadwell-U Audio Controller driver: snd_hda_intel bus-ID: 00:03.0
           Sound: Advanced Linux Sound Architecture v: k4.9.92-lxpup-32-pae
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 03:00.0
           IF: enp3s0 state: down mac: <filter>
           Card-2: Intel Wireless 7265 driver: iwlwifi bus-ID: 04:00.0
           IF: wlp4s0 state: up mac: <filter>
Drives:    HDD Total Size: 530.9GB (0.7% used)
           ID-1: /dev/sda model: TOSHIBA_MQ01ACF0 size: 500.1GB
           ID-2: /dev/sdb model: Ultra_Fit size: 30.8GB
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 186 Uptime: 6 min Memory: 222.5/7756.6MB Init: SysVinit runlevel: 5 Gcc sys: N/A
           Client: Shell (bash 4.4.191) inxi: 2.3.8      

[recobayu]

Yeay!
Thank's Peebee, Finally I can connect to my campus's network that use WPA2Enterprise using this Bionicpup+4. But I use the previous file from artful: /etc/frisbee/wpa_supplicant.conf. And after several time i connect manual by terminal:

Code: Select all

wpa_supplicant -iwlp3s0 -Dwext -c /etc/frisbee/wpa_supplicant.conf 

I think there are some different code in the new woof-CE for frisbee. I post my problem also in woof-CE thread: http://www.murga-linux.com/puppy/viewto ... 922#987922

[nilsonmorales]

Hi guys, is olny me or the ttf mimetypes problem is back?
Upup_Bionic_Beaver-18.04.iso___Upup_Bionic_Beaver-18.04+4.iso.delta MD5SUM 74c22c6ee94ea6e8bf87927efbc28197
Upup_Bionic_Beaver-18.04+4.iso MD5SUM 23a54b63aa48956f50a3e10495e96b1e

[recobayu]

i have no problem with ttf file here. but otf file..

[peebee]

i have no problem with ttf file here. but otf file..

see next post

[peebee]

Delta +5
Hopefully fonts are fixed - please test .otf and .woff particularly
+ UBB updates including removal of openslp "an open-source implementation of the IETF Service Location Protocol" with no bad effects as far as I can determine....

[oui]

Hi Peebee

according to the actual msg at Distrowatch, the publication of the stable version is now only a question of a few days.

How-to build ArtfulPup....

1. Use a recent 32-bit Puppy installation...
2. with devx loaded
3. with an internet connection
4. Get woof-CE - in a terminal run:

Code: Select all

git clone https://github.com/puppylinux-woof-CE/woof-CE.git -b testing

5. Download artful/ folder; in the terminal run:

Code: Select all

wget -r -np -R "index.html*" http://smokey01.com/peebee/artfulpup/woof-distro/x86/ubuntu/artful/

6. Move /smokey01.com/peebee/artfulpup/woof-distro/x86/ubuntu/artful folder to: /woof-CE/woof-distro/x86/ubuntu/
7. Change directory to /woof-CE; in a terminal run

Code: Select all

./merge2out
		target architecture 2 - x86
		compat-distro 5 - ubuntu
		release 1 - artful

8. Change directory to /woof-out_x86_x86_ubuntu_artful; delete all files Packages-Puppy-*-Official
9. In a terminal run:

Code: Select all

./0setup
./support/findpkgs

10. Check FINDPKGS-NOT-FOUND and /status/findpkgs_FINAL_PKGS-ubuntu-artful are OK
11. Move /woof-out_x86_x86_ubuntu_artful/rootfs-packages.conf to folder /woof-out_x86_x86_ubuntu_artful/support/
12. Download kernel from:
https://sourceforge.net/projects/lxpup/ ... 2/download
and then move kernel to /woof-out_x86_x86_ubuntu_artful/huge_kernel/
13. Make folder /sandbox3 if it doesn't exist; download 4 files from:
http://smokey01.com/peebee/artfulpup/drv-sfs/
and then move adrv, fdrv, ydrv and README-extra_sfs to /sandbox3
14. Now the lengthy bits... in a terminal run:

Code: Select all

./1download
./2createpackages
./3builddistro-Z

Notes:
Step 12 - other huge-kernels can be used; lxpup kernels require the fdrv (step 13); other huge-kernels may have firmware in the zdrv.

can that methode be considered as yet optimised for Bionic Beaver stable?

or are you perhaps doing somewhat concrete in that direction as Beaver have to become an LTS, very important for puppy (puppy is very ill now not to take under consideration the difference between Debian staying disponible long years ago, or Ubuntu LTS's and poor one-night Ubuntu's only to try or get a bit more experience. The 8.10 of Jennie (started 26th April 2015! Like the in Puppy completely forgotten Vivid!) did be published only in Dec. 2017 after continous developement, is now for years old stable until the parution of the coming new stable and stay accessible long time after that as archived very old stable release each time accessible on the cheap DVD collections as binaries as well as sources...

(surprising is the poor enthousiasm for those releases in contrast with the long time of possible prestations...)

[peebee]

can that methode be considered as yet optimised for Bionic Beaver stable?

Not yet.....

[Terry H]

uBBPup 18.04 +5 working fine on Dell Latitude 3350 Core i3-5005U laptop.

[nilsonmorales]

Hi testing 1804+5, till now everything works ok.

just had to define the icon from /usr/local/lib/X11/pixmaps/console48.png to /usr/local/bin/defaultterminal when change to puppystandard theme

Motherboard Vendor: ASRock
Product Name: N68-S

BIOS Vendor: American Megatrends Inc.
Version: P1.50
Release Date: 07/17/2009

AMD Sempron(tm) Processor 140 Processor
Max Speed: 2700 MHz
Current Speed of Core 0:2700 MHz

Frequency governor : ondemand
Freq. scaling driver : acpi-cpufreq

temp1 (k10temp) : +27.0 C (high = +70.0 C, crit = +70.0 C)

Linux Kernel: 4.9.92-lxpup-32-pae (i686)
Kernel Version: #1 SMP Sun Apr 1 12:41:54 +08 2018
PAE Enabled: Yes

Bash: 4.4.19
Geany: 1.29
Gtkdialog: 0.8.4
Perl: 5.26.1
Python: 2.7.14+
--
busybox: 1.28.2
dhcpcd: 6.7.1
Glibc: 2.27
OpenSSL: 1.1.0g 2 Nov 2017, built on: reproducible build, date unspecified
wpa_supplicant: 2.6

Display Specifications:
• Monitor VertRefresh: 75.02 times/s
• Screen Dimensions: 1280x1024 pixels (338x270 millimeters)
• Screen Depth: 24 bits (planes)

Xorg Startup Log (/var/log/Xorg.0.log):
• Xorg Driver in use: nouveau
• Loaded Modules: dbe dri2 evdev exa fb fbdevhw glx libinput shadowfb
• X.Org version: 1.19.6

OpenGL 2D/3D Rendering:
• Direct Rendering: Yes
• Vendor: nouveau
• Renderer: NV4C
• Version: 2.1 Mesa 18.0.0-rc5

VGA controller [0300]: NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] [10de:03d6] (rev a2)
• Kernel Driver: nouveau
• Memory Used by Driver: 1291.10 KB
• Path: /lib/modules/4.9.92-lxpup-32-pae/kernel/drivers/gpu/drm/nouveau/nouveau.ko
• Description: nVidia Riva/TNT/GeForce/Quadro/Tesla
• Video RAM: 256M

Made some changes and install spanish langpack, will need a lot of work start to translate the new gtkdialog apps, wizards and etc, did a install some pets without problems,

[mavrothal]

It would appear that the devx can not be unloaded on the fly. Only at restart.
Is not clear what keeps it busy as lsof and aufs do not plau well together to find the exact loop/mount-point open files are coming from.

[peebee]

Delta +7
Just keeping track with UBB updates....

74017fac260f1aa7f669e085d08c02f9 Upup_Bionic_Beaver-18.04+7.iso

[gyro]

Is it just me, or have others noticed the renaming of "eth0" in Upup-Bionic-Beaver? Mine is now "enp3s0".
Has anyone found a way to avoid this renaming?

gyro