Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Wed 19 Sep 2018, 01:23
All times are UTC - 4
 Forum index » Advanced Topics » Cutting edge
Beta testers for inxi version 3.0.0 wanted
Moderators: Flash, Ian, JohnMurga
Post new topic   Reply to topic View previous topic :: View next topic
Page 1 of 2 [20 Posts]   Goto page: 1, 2 Next
Author Message
h2-1

Joined: 14 Mar 2018
Posts: 7

PostPosted: Wed 14 Mar 2018, 15:35    Post subject:  Beta testers for inxi version 3.0.0 wanted
Subject description: Testing for bugs, issues, glitches
 

Hi Puppy users. I figure that you are more likely to have old, or otherwise currently untested hardware, so you might find some issues others have missed so far.

I'm working on the new 3.0.0 release of inxi. The development branch is called pinxi, so you can run pinxi and inxi together to compare etc. Once all the bugs and issues that are going to be found are found, the pinxi branch will move to inxi master and become inxi 3.0.0. Pinxi is a full rewrite, in Perl5, of inxi.

Git branch: https://github.com/smxi/inxi/tree/inxi-perl

To test, install/download:

Code:
wget -O /usr/local/bin/pinxi https://github.com/smxi/inxi/raw/inxi-perl/pinxi
chmod +x /usr/local/bin/pinxi


Once installed, updating works the same as with inxi:

Code:
pinxi -U


I want to release version 3.0.0 of inxi with no real bugs, at least as few as possible, and as many improvements over inxi 2.3.56 as possible.

I"m probably now in my final week of beta testing, but I'd like if other distros would give it a spin and see if there are any errors, bugs, issues, glitches, etc.

The only feature that is not totally complete is RAID, but I expect that to be done by today. Once there are no active issues or bugs, pinxi will move to inxi 3.0.0, or maybe inxi 2.9.01.

Of particular interest to me is ARM testing and RAID, those can always use more work.

Note that pinxi/inxi will respect all existing user configurations, no changes will be required, and all short form args for normal options are the same, only now there are also long form args for everything as well, which means any tools that use inxi should see few changes, though you want to check that to make sure.

There's an enhanced debugger as well, called with --debug 21 (leaves tar.gz data file on your system) or --debug 22 (removes all debugging data after automatic upload), which is helping a lot with debugging issues.

The most useful testing command is: pinxi -zv8

-zv8 is basically everything it can do, so any bugs will show there if they exist, plus the -z output filter.

Last edited by h2-1 on Thu 15 Mar 2018, 15:34; edited 2 times in total
Back to top
View user's profile Send private message Visit poster's website 
Flash
Official Dog Handler


Joined: 04 May 2005
Posts: 13008
Location: Arizona USA

PostPosted: Wed 14 Mar 2018, 20:33    Post subject:  

What is inxi? What does it do for me? Why do I have to have it?
Back to top
View user's profile Send private message 
drunkjedi


Joined: 24 May 2015
Posts: 897

PostPosted: Wed 14 Mar 2018, 21:21    Post subject:  

inxi is command line tool for hardware info.
I remember using it in some pup. But don't remember which.
Do pups have perl5 or have to load dev sfs?
Back to top
View user's profile Send private message 
matchpoint

Joined: 26 Jan 2018
Posts: 169

PostPosted: Wed 14 Mar 2018, 21:31    Post subject:  

Doesn't need much methinks. Here's an example.
Back to top
View user's profile Send private message 
h2-1

Joined: 14 Mar 2018
Posts: 7

PostPosted: Wed 14 Mar 2018, 22:16    Post subject: Fewer dependencies, Perl  

Just to be clear, the new inxi is Perl, not Bash/Gawk.

As a result, the entire set of dependencies inxi had, bash, gawk, sed, tr, grep, all those things, are removed, and replaced with one single dependency, Perl 5.x 5.08 or newer.

So there's a major difference there. However, you can see if there are any issues by simply installing pinxi, and then running it. If it runs, it's all good. If not, it needs Perl.

I've made a real point of avoiding any modules not in Perl core modules, so all that's required is the barebones Perl install, Perl + core modules, that is, which in most distros is just Perl.
Back to top
View user's profile Send private message Visit poster's website 
Terry H

Joined: 29 Mar 2009
Posts: 413
Location: The Heart of Muskoka, ON Canada

PostPosted: Wed 14 Mar 2018, 22:23    Post subject:  

Normally I wouldn't touch a request like this from a users first post, but seems above board. So I hope this helps. I changed the command, adding z to mask some information.
Code:

# pinxi -v8z
System:    Host: puppypc25491 Kernel: 4.9.83-stretch i686 bits: 32 compiler: gcc v: 7.3.0 Console: tty 0
           dm: N/A Distro: Dpup Stretch 7.5
Machine:   Type: Laptop System: Dell product: Latitude 3350 v: N/A serial: <filter> Chassis: type: 9
           serial: <filter>
           Mobo: Dell model: 0KVTCC v: A00 serial: <filter> UEFI: Dell v: A13 date: 01/23/2018
Battery:   BAT-0: charge: 43.7 Wh condition: 35.4/43.7 Wh (81%) volts: 8.2/7.4 model: Samsung SDI DELL 6C0FN58
           type: Li-ion serial: <filter> status: Full
Memory:    Array-1: capacity: 16 GB slots: 2 EC: None max module size: N/A
           Device-1: DIMM A size: 4 GB speed: 1600 MT/s type: DDR3 detail: synchronous bus width: 64 bits
           total: 64 bits manufacturer: Samsung part-nu: M471B5173EB0-YK0 serial: B1F8E493
           Device-2: DIMM B size: 4 GB speed: 1600 MT/s type: DDR3 detail: synchronous bus width: 64 bits
           total: 64 bits manufacturer: Samsung part-nu: M471B5173EB0-YK0 serial: B3E490C1
PCI Slots: Slot: 0 type: x16 PCI Express J6B2 status: In Use length: Long
           Slot: 1 type: x1 PCI Express J6B1 status: In Use length: Short
           Slot: 2 type: x1 PCI Express J6D1 status: In Use length: Short
           Slot: 3 type: x1 PCI Express J7B1 status: In Use length: Short
           Slot: 4 type: x1 PCI Express J8B4 status: In Use length: Short
CPU:       Topology: Dual Core model: Intel Core i3-5005U type: MT MCP arch: Broadwell rev: 4 L2 cache: 3072 KB
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 15963
           Speed: 500 MHz min/max: 500/2000 MHz Core speeds: 1: 500 2: 500 3: 500 4: 500
Graphics:  Card-1: Intel HD Graphics 5500 driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:1616
           Display Server: X.Org 1.19.2 driver: modesetting unloaded: vesa,fbdev resolution: 1366x768~60Hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 5500 (Broadwell GT2) x86/MMX/SSE2
           version: 4.5 Mesa 13.0.6 compat-v: 3.0 direct render: Yes
Audio:     Card-1: Intel Broadwell-U Audio Controller driver: snd_hda_intel v: kernel bus ID: 00:03.0
           chip ID: 8086:160c
           Card-2: Intel Wildcat Point-LP High Definition Audio Controller driver: snd_hda_intel v: kernel
           bus ID: 00:1b.0 chip ID: 8086:9ca0
           Sound Server: ALSA v: k4.9.83-stretch
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           v: 2.3LK-NAPI port: e000 bus ID: 03:00 chip ID: 10ec:8168
           IF: eth0 state: down mac: <filter>
           Card-2: Intel Wireless 7265 driver: iwlwifi v: kernel bus ID: 04:00 chip ID: 8086:095a
           IF: wlan0 state: up mac: <filter>
           IP v4: <filter> scope: global broadcast: <filter>
           IF-ID-1: tunl0 state: down mac: <filter>
           WAN IP: <filter>
Drives:    HDD Total Size: 494.40 GB used: 4.24 GB (0.9%)
           ID-1: /dev/sda model: TOSHIBA_MQ01ACF0 size: 465.76 GB serial: N/A rev: 1D
           ID-2: /dev/sdb model: Ultra_Fit size: 28.64 GB serial: N/A rev: 1.00
           Message: No Optical or Floppy data was found.
RAID:      Message: No RAID data was found.
Partition: ID-1: /initrd/mnt/dev_save size: 14.56 GB used: 3.71 GB (25.5%) fs: ext4 dev: /dev/sdb2 label: N/A
           uuid: N/A
           ID-2: /initrd/pup_ro2 size: 261.1 MB used: 261.1 MB (100.0%) fs: squashfs dev: /dev/loop0 label: N/A
           uuid: N/A
           ID-3: /initrd/pup_z size: 48.4 MB used: 48.4 MB (100.0%) fs: squashfs dev: /dev/loop1 label: N/A
           uuid: N/A
           ID-4: /initrd/pup_a size: 2.5 MB used: 2.5 MB (100.0%) fs: squashfs dev: /dev/loop2 label: N/A
           uuid: N/A
           ID-5: /dev/shm size: 1.73 GB used: 23.9 MB (1.3%) fs: tmpfs dev: ERR-102 label: N/A uuid: N/A
           ID-6: /initrd/pup_ro3 size: 80.5 MB used: 80.5 MB (100.0%) fs: squashfs dev: /dev/loop3 label: N/A
           uuid: N/A
           ID-7: /initrd/pup_ro4 size: 71.0 MB used: 71.0 MB (100.0%) fs: squashfs dev: /dev/loop4 label: N/A
           uuid: N/A
           ID-8: /initrd/pup_ro5 size: 55.5 MB used: 55.5 MB (100.0%) fs: squashfs dev: /dev/loop5 label: N/A
           uuid: N/A
           ID-9: /initrd/pup_ro6 size: 15.8 MB used: 15.8 MB (100.0%) fs: squashfs dev: /dev/loop6 label: N/A
           uuid: N/A
Unmounted: ID-1: /dev/sda1 size: 100.0 MB fs: FAT (32 bit) label: N/A uuid: N/A
           ID-2: /dev/sda2 size: 16.0 MB fs: N/A label: N/A uuid: N/A
           ID-3: /dev/sda3 size: 900.0 MB fs: NTFS label: N/A uuid: N/A
           ID-4: /dev/sda4 size: 464.77 GB fs: NTFS label: N/A uuid: N/A
           ID-5: /dev/sdb1 size: 100.0 MB fs: FAT (32 bit) label: N/A uuid: N/A
USB:       Hub: 1:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002
           Hub: 1:2 usb: 2.00 type: Intel Full speed (or root) hub chip ID: 8087:8001
           Device-1: Sunplus Innovation Laptop Integrated Webcam HD bus ID: 1:3 usb: 2.00 type: Video
           chip ID: 1bcf:28ae
           Hub: 2:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002
           Device-2: Intel bus ID: 2:2 usb: 2.01 type: Bluetooth chip ID: 8087:0a2a
           Hub: 3:1 usb: 3.00 type: Full speed (or root) hub chip ID: 1d6b:0003
           Device-3: SanDisk bus ID: 3:2 usb: 3.00 type: Mass Storage chip ID: 0781:5583
Sensors:   System Temperatures: cpu: 54.0 C mobo: N/A
           Fan Speeds (in RPM): N/A
Repos:     Alert: No repo data detected. Does pinxi support your package manager?
Processes: CPU  % used - Command - pid - Memory: MB / % used - top: 5
           1: cpu: 6.6% command: firefox pid: 24115 mem: 232.6MB (2.9%)
           2: cpu: 4.8% command: xorg pid: 8620 mem: 50.8MB (0.6%)
           3: cpu: 2.8% command: firefox pid: 24385 mem: 164.8MB (2.1%)
           4: cpu: 1.4% command: lxterminal pid: 22948 mem: 17.7MB (0.2%)
           5: cpu: 0.4% command: compton pid: 9033 mem: 6.46MB (0.0%)
           Memory MB/% used - Command - pid - CPU: % used - top: 5
           1: mem: 232.6 MB (6.6%) command: firefox pid: 24115 cpu: 2.9%
           2: mem: 164.8 MB (2.8%) command: firefox pid: 24385 cpu: 2.1%
           3: mem: 58.4 MB (0.0%) command: firefox pid: 10057 cpu: 0.7%
           4: mem: 50.8 MB (4.8%) command: xorg pid: 8620 cpu: 0.6%
           5: mem: 27.4 MB (0.0%) command: pnmixer pid: 13176 cpu: 0.3%
Info:      Processes: 191 Uptime: 13 min Memory: 7.57 GB used: 364.5 MB (4.7%) Init: SysVinit v: N/A
           runlevel: 35 Compilers: gcc: N/A Shell: bash 4.4.12 running in: lxterminal pinxi: 2.9.00-419-p
#
Back to top
View user's profile Send private message 
h2-1

Joined: 14 Mar 2018
Posts: 7

PostPosted: Wed 14 Mar 2018, 22:35    Post subject: Looks good.  

Terry H, thanks for testing. If you compare inxi bash/gawk and inxi perl (aka beta name pinix), re time, you'll see one of the differences using perl makes:

time inxi -v7
time pinxi -v7

My systems usually give me around 2x faster or more for pinxi than inxi, which considering pinxi is doing quite a bit more than inxi does, is saying a something re the benefits of using Perl instead of the mutant bash/gawk i've used for almost 10 years now.

This is a big difference on old hardware, on my old pentium mmx 200 mghz laptop, inxi -v7 takes about 23 seconds to run, and pinxi -v7 only about 12 seconds. Obviously on newer hardware it's much less.

The repos require the data to add them, if it's a file, the path and file name of the file, and a sample file. Once I get that data, it doesn't take me too long to add a distro repo handler.

I'm pretty close to release, so far I'm only seeing missing repo data from the distros I'm asking to test it. I forgot the -z, I'll update my initial post, thanks.

I've just gotten the last bits of RAID working so pinxi is now just waiting for final beta testers, and any last minute thing, like adding repos for distros that don't show up, fixing last minute issues, etc.
Back to top
View user's profile Send private message Visit poster's website 
peebee


Joined: 21 Sep 2008
Posts: 3464
Location: Worcestershire, UK

PostPosted: Thu 15 Mar 2018, 03:35    Post subject:  

On LxPupSc-18.03
Code:
# pinxi -v8
Can't locate Sys/Hostname.pm in @INC (you may need to install the Sys::Hostname module) (@INC contains: /usr/local/lib/perl5 /usr/local/share/perl5 /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5 /usr/share/perl5) at /usr/local/bin/pinxi line 35.
BEGIN failed--compilation aborted at /usr/local/bin/pinxi line 35.

_________________
LxPup = Puppy + LXDE
Back to top
View user's profile Send private message Visit poster's website 
drunkjedi


Joined: 24 May 2015
Posts: 897

PostPosted: Thu 15 Mar 2018, 06:24    Post subject:  

On Fatdog64 -721 I had to make the perl script executable.
I ran it with time command, I don't have inxi to compare it with though.
My PC is not old either. Hope this helps.
Code:
# time pinxi -v8z
System:    Host: fatdog64-nmk Kernel: 4.14.12 x86_64 bits: 64 compiler: gcc v: 4.8.3 Console: tty 0 dm: N/A
           Distro: Fatdog64 Linux 721
Machine:   Type: Desktop Mobo: Intel model: DH61BF v: AAG81311-102 serial: <filter> BIOS: Intel
           v: BFH6110H.86A.0009.2013.0715.1155 date: 07/15/2013
Memory:    Array-1: capacity: 16 GB slots: 2 EC: None max module size: N/A
           Device-1: CHANNEL A DIMM0 size: 2 GB speed: 1333 MHz type: DDR3 detail: synchronous
           bus width: 64 bits total: 64 bits manufacturer: 8783 part-nu: EVMT2G1333U86S serial: N/A
           Device-2: CHANNEL B DIMM0 size: 4 GB speed: 1333 MHz type: DDR3 detail: synchronous
           bus width: 64 bits total: 64 bits manufacturer: Hynix/Hyundai part-nu: DMT451E6MFR8C-H9
           serial: 2BA53262
PCI Slots: Slot: 1 type: x1 PCI Express x1 PCIe X1 status: Available length: Short
           Slot: 2 type: x1 PCI Express x1 PCIe X1 status: In Use length: Short
           Slot: N/A type: x16 PCI Express 3 x16 PCIe X16 status: Available length: Short
CPU:       Topology: Dual Core model: Intel Core i3-3220 type: MT MCP arch: Ivy Bridge rev: 9 L2 cache: 3072 KB
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 26350
           Speed: 1596 MHz min/max: 1600/3300 MHz Core speeds: 1: 1596 2: 1597 3: 1596 4: 1597
Graphics:  Message: No PCI card data found.
           Display Server: X.Org 1.19.5 driver: intel unloaded: modesetting,fbdev,vesa
           resolution: 1920x1080~60Hz
           OpenGL: renderer: Mesa DRI Intel Ivybridge Desktop version: 4.2 Mesa 17.2.8 compat-v: 3.0
           direct render: Yes
Audio:     Card-1: HDA Intel PCH driver: HDA-Intel message: bus/chip ids unavailable
           Sound Server: ALSA v: k4.14.12
Network:   Message: No PCI card data found.
           IF-ID-1: eth0 state: down mac: <filter>
           IF-ID-2: usb0 state: unknown speed: N/A duplex: N/A mac: <filter>
           IP v4: <filter> scope: global broadcast: <filter>
           IP v6: <filter> scope: link
           WAN IP: <filter>
Drives:    HDD Total Size: 466.71 GB used: 11.09 GB (2.4%)
           ID-1: /dev/sda model: ST500DM002-1BD14 size: 465.76 GB serial: <filter> rev: KC48
           ID-2: /dev/sdf type: USB model: TS1GJFV30 size: 968.0 MB serial: <filter> rev: 8.07
           Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GH24NSB0 rev: LN00 dev-links: cdrom,dvd,scd0
           Features: speed: 12 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram
           state: running
RAID:      Message: No RAID data was found.
Partition: ID-1: /aufs/kernel-modules size: 128 KB used: 128 KB (100.0%) fs: squashfs dev: /dev/loop0
           label: N/A uuid: N/A
           ID-2: /aufs/pup_ro size: 1.30 GB used: 1.28 GB (97.9%) fs: ext2 dev: /dev/loop1 label: N/A
           uuid: d98379f6-60b8-4dcb-b7e2-a4a4a157c694
           ID-3: /aufs/devsave size: 96.00 GB used: 9.32 GB (9.7%) fs: ext4 dev: /dev/sda7 label: N/A
           uuid: 47d8305f-7c6f-4e12-89de-ee01f9b9d697
           ID-4: /aufs/pup_ro10 size: 364.0 MB used: 364.0 MB (100.0%) fs: squashfs dev: /dev/loop10 label: N/A
           uuid: N/A
           ID-5: /aufs/pup_ro11 size: 86.4 MB used: 86.4 MB (100.0%) fs: squashfs dev: /dev/loop11 label: N/A
           uuid: N/A
           ID-6: /aufs/pup_ro12 size: 45.9 MB used: 45.9 MB (100.0%) fs: squashfs dev: /dev/loop12 label: N/A
           uuid: N/A
Unmounted: ID-1: /dev/sda1 size: 100.0 MB fs: NTFS label: System Reserved uuid: 669ED4739ED43CED
           ID-2: /dev/sda2 size: 97.56 GB fs: NTFS label: N/A uuid: DE2EE6C02EE690B7
           ID-3: /dev/sda3 size: 97.66 GB fs: NTFS label: N/A uuid: 2C54A05154A02016
           ID-4: /dev/sda5 size: 12.00 GB fs: swap label: N/A uuid: 09f238d2-6e62-41fe-a3f3-c46da95d6ca3
           ID-5: /dev/sda6 size: 48.83 GB fs: ext4 label: N/A uuid: 53806c39-3972-4ea7-89ce-61d55f1db5fe
           ID-6: /dev/sda8 size: 111.96 GB fs: ext4 label: N/A uuid: 1e0a8303-29a1-42e4-af8c-e177d1018378
           ID-7: /dev/sdf1 size: 967.0 MB fs: FAT (32 bit) label: N/A uuid: 9B56-713E
USB:       Hub: 1:1 usb: N/A type: N/A chip ID: 1d6b:0002
           Device-1: N/A bus ID: 1:2 usb: N/A type: N/A chip ID: 8087:0024
           Hub: 2:1 usb: N/A type: N/A chip ID: 1d6b:0002
           Device-2: N/A bus ID: 2:2 usb: N/A type: N/A chip ID: 8087:0024
           Device-3: N/A bus ID: 2:3 usb: N/A type: N/A chip ID: 058f:6364
           Hub: 3:1 usb: N/A type: N/A chip ID: 1d6b:0002
           Device-4: N/A bus ID: 3:2 usb: N/A type: N/A chip ID: 2109:3431
           Device-5: N/A bus ID: 3:3 usb: N/A type: N/A chip ID: 058f:6387
           Device-6: N/A bus ID: 3:5 usb: N/A type: N/A chip ID: 05c6:6766
           Hub: 4:1 usb: N/A type: N/A chip ID: 1d6b:0003
Sensors:   System Temperatures: cpu: 36.0 C mobo: N/A
           Fan Speeds (in RPM): N/A
Repos:     Alert: No repo data detected. Does pinxi support your package manager?
Processes: CPU  % used - Command - pid - Memory: MB / % used - top: 5
           1: cpu: 3.8% command: seamonkey pid: 23818 mem: 246.4MB (4.2%)
           2: cpu: 0.8% command: x pid: 23424 mem: 69.0MB (1.1%)
           3: cpu: 0.2% command: lxqt-panel pid: 23485 mem: 33.6MB (0.5%)
           4: cpu: 0.1% command: init pid: 1 mem: 0.00MB (0.0%)
           5: cpu: 0.1% command: rox-filer pid: 23476 mem: 22.4MB (0.3%)
           Memory MB/% used - Command - pid - CPU: % used - top: 5
           1: mem: 246.4 MB (3.8%) command: seamonkey pid: 23818 cpu: 4.2%
           2: mem: 69.0 MB (0.8%) command: x pid: 23424 cpu: 1.1%
           3: mem: 33.6 MB (0.2%) command: lxqt-panel pid: 23485 cpu: 0.5%
           4: mem: 24.9 MB (0.0%) command: wpa_gui pid: 23788 cpu: 0.4%
           5: mem: 22.4 MB (0.1%) command: rox-filer pid: 23476 cpu: 0.3%
Info:      Processes: 155 Uptime: 10 min Memory: 5.73 GB used: 338.7 MB (5.8%) Init: SysVinit v: N/A Compilers:
           gcc: 4.8.3 Shell: perl is running in: urxvt pinxi: 2.9.00-422-p

real   0m3.675s
user   0m0.308s
sys   0m0.136s
#
Back to top
View user's profile Send private message 
fredx181


Joined: 11 Dec 2013
Posts: 3353
Location: holland

PostPosted: Thu 15 Mar 2018, 07:03    Post subject:  

Works nicely on my Stretch-live, thanks !
Code:
root@live:~# pinxi -v8z
System:
  Host: live Kernel: 4.9.0-6-686-pae i686 bits: 32 compiler: gcc v: 6.3.0
  Desktop: Xfce 4.12.3 (Gtk 2.24.30) info: xfce4-panel dm: startx
  Distro: Debian GNU/Linux 9 (stretch)
Machine:
  Type: Laptop System: Hewlett-Packard
  product: HP Compaq 6710b (KE121ET#ABH) v: F.13 serial: <filter> Chassis:
  type: 10 serial: <filter>
  Mobo: Hewlett-Packard model: 30C0 v: KBC Version 71.2E serial: N/A
  BIOS: Hewlett-Packard v: 68DDU Ver. F.13 date: 08/18/2008
Memory:
  RAM Report: missing: Required program dmidecode not available
PCI Slots:
  Missing: Required program dmidecode not available
CPU:
  Topology: Dual Core model: Intel Core2 Duo T8100 type: MCP arch: Penryn
  rev: 6 L2 cache: 3072 KB
  flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 8379
  Speed: 800 MHz min/max: 800/2100 MHz Core speeds: 1: 800 2: 800
Graphics:
  Card-1: Intel Mobile GM965/GL960 Integrated Graphics Controller (primary)
  driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:2a02
  Display Server: X.Org 1.19.2 driver: intel resolution: 1280x800~60Hz
  OpenGL: renderer: Gallium 0.4 on llvmpipe (LLVM 3.9 128 bits)
  version: 3.3 Mesa 13.0.6 compat-v: 3.0 direct render: Yes
Audio:
  Card-1: Intel 82801H (ICH8 Family) HD Audio Controller
  driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:284b
  Sound Server: ALSA v: k4.9.0-6-686-pae
Network:
  Card-1: Intel PRO/Wireless 3945ABG [Golan] Network Connection
  driver: iwl3945 v: in-tree:s bus ID: 10:00 chip ID: 8086:4222
  IF: wlan0 state: down mac: <filter>
  Card-2: Broadcom Limited NetLink BCM5787M Gigabit Ethernet PCI Express
  driver: tg3 v: 3.137 port: N/A bus ID: 18:00 chip ID: 14e4:1693
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IP v6: <filter> scope: link
  WAN IP: <filter>
Drives:
  HDD Total Size: 1.14 TB used: 139.97 GB (12.0%)
  ID-1: /dev/sda model: CT240BX200SSD1 size: 223.57 GB serial: <filter>
  rev: .6
  ID-2: /dev/sdb type: USB model: Expansion size: 931.51 GB serial: <filter>
  rev: 9300
  ID-3: /dev/sdc type: USB model: USB_Flash_Drive size: 7.53 GB
  serial: <filter> rev: 0.00
  Optical-1: /dev/sr0 vendor: Optiarc model: DVD RW AD-7581A rev: BH05
  dev-links: cdrom,cdrw,dvd,dvdrw
  Features: speed: 24 multisession: yes audio: yes dvd: yes
  rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
RAID:
  Message: No RAID data was found.
Partition:
  ID-1: /mnt/sda7 size: 166.84 GB used: 137.89 GB (82.6%) fs: ext4
  dev: /dev/sda7 label: N/A uuid: 12e1e33f-47a6-4979-b13a-404e60f746b9
  ID-2: /mnt/live/memory/images/01-filesystem.squashfs size: 1.12 GB
  used: 1.12 GB (100.0%) fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A
  ID-3: /mnt/sdc1 size: 3.43 GB used: 981.1 MB (28.0%) fs: vfat
  dev: /dev/sdc1 label: N/A uuid: 5015-9364
  ID-4: /mnt/live/memory/images/git.squashfs size: 7.0 MB
  used: 7.0 MB (100.0%) fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A
  ID-5: swap-1 size: 2.33 GB used: 0 KB (0.0%) fs: swap dev: /dev/sda6
  label: N/A uuid: 4591e297-0cd7-4f56-a85c-b7eb884a9ff4
  ID-6: swap-2 size: 800.0 MB used: 16 KB (0.0%) fs: swap dev: /dev/zram0
  label: N/A uuid: N/A
Unmounted:
  ID-1: /dev/sda1 size: 22.35 GB fs: NTFS label: N/A uuid: F254A16954A130F1
  ID-2: /dev/sda2 size: 6.44 GB fs: ext4 label: N/A
  uuid: cd00f1f7-eb7f-41a1-8e89-607e9d93ea72
  ID-3: /dev/sda3 size: 5.45 GB fs: ext4 label: N/A
  uuid: 4faf7aab-e4e6-42d4-bab2-c49f80715708
  ID-4: /dev/sda5 size: 17.36 GB fs: ext4 label: N/A
  uuid: 435ca105-39cb-496b-a789-70bd2ecee7e2
  ID-5: /dev/sdb1 size: 7.45 GB fs: ext2 label: N/A
  uuid: 18bfd03c-0696-4783-85e8-9da41cb44642
  ID-6: /dev/sdb2 size: 924.06 GB fs: NTFS label: XData
  uuid: 0D8E58BF0C39F709
  ID-7: /dev/sdc2 size: 4.10 GB fs: ext2 label: N/A
  uuid: 2f86ee82-a47b-4f13-9a06-e4c534eeaa02
USB:
  Hub: 1:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002
  Hub: 2:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002
  Device-1: A-DATA bus ID: 2:2 usb: 2.00 type: Mass Storage
  chip ID: 125f:c83a
  Device-2: Seagate RSS LLC bus ID: 2:3 usb: 2.10 type: Mass Storage
  chip ID: 0bc2:2322
  Hub: 3:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Hub: 4:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Hub: 5:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Hub: 6:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Hub: 7:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Device-3: Logitech Optical Wheel Mouse bus ID: 7:2 usb: 2.00 type: Mouse
  chip ID: 046d:c016
Sensors:
  System Temperatures: cpu: 33.0 C mobo: 23.6 C
  Fan Speeds (in RPM): N/A
Repos:
  Active apt sources in: /etc/apt/sources.list
  1: deb https://fredx181.github.io/StretchDog/i386/Packages/ ./
  2: deb http://deb.debian.org/debian/ stretch main contrib non-free
  3: deb http://security.debian.org/debian-security stretch/updates main contrib non-free
  4: deb-src http://security.debian.org/debian-security stretch/updates main contrib non-free
  Active apt sources in: /etc/apt/sources.list.d/seamonkey.list
  1: deb http://downloads.sourceforge.net/project/ubuntuzilla/mozilla/apt all main
Processes:
  CPU  % used - Command - pid - Memory: MB / % used - top: 5
  1: cpu: 3.5% command: firefox pid: 20886 mem: 274.8MB (13.6%)
  2: cpu: 3.5% command: firefox pid: 20932 mem: 163.4MB (8.1%)
  3: cpu: 1.0% command: xfce4-terminal pid: 19260 mem: 26.1MB (1.2%)
  4: cpu: 0.5% command: conky pid: 2824 mem: 6.70MB (0.3%)
  5: cpu: 0.4% command: xorg pid: 2571 mem: 84.3MB (4.1%)
  Memory MB/% used - Command - pid - CPU: % used - top: 5
  1: mem: 274.8 MB (3.5%) command: firefox pid: 20886 cpu: 13.6%
  2: mem: 163.4 MB (3.5%) command: firefox pid: 20932 cpu: 8.1%
  3: mem: 84.3 MB (0.4%) command: xorg pid: 2571 cpu: 4.1%
  4: mem: 58.1 MB (0.0%) command: firefox pid: 20984 cpu: 2.8%
  5: mem: 26.1 MB (1.0%) command: xfce4-terminal pid: 19260 cpu: 1.2%
Info:
  Processes: 157 Uptime: 13:40 Memory: 1.96 GB used: 412.4 MB (20.5%)
  Init: SysVinit v: N/A runlevel: 2 default: 2 Compilers: gcc: N/A
  Shell: bash 4.4.12 running in: xfce4-terminal pinxi: 2.9.00-422-p

_________________
Dog Linux website
Back to top
View user's profile Send private message 
perdido


Joined: 09 Dec 2013
Posts: 949
Location: ¿Altair IV , Just north of Eeyore Junction.?

PostPosted: Thu 15 Mar 2018, 10:10    Post subject:  

Puppy Precise 5.7.1
Dell laptop e6400
laptop built 2011

Code:

# pinxi -v8z
Can't locate Sys/Hostname.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /usr/bin/pinxi line 35.
BEGIN failed--compilation aborted at /usr/bin/pinxi line 35.
#


Version of Perl
Code:

# perl -v

This is perl 5, version 14, subversion 2 (v5.14.2) built for i686-linux-gnu-thread-multi-64int
(with 56 registered patches, see perl -V for more detail)

Copyright 1987-2011, Larry Wall

Perl may be copied only under the terms of either the Artistic License or the
GNU General Public License, which may be found in the Perl 5 source kit.

Complete documentation for Perl, including FAQ lists, should be found on
this system using "man perl" or "perldoc perl".  If you have access to the
Internet, point your browser at http://www.perl.org/, the Perl Home Page.

#

*****************************8
Loaded the devx and had success

Code:

# pinxi -v8z
Made: /root/.local/share/pinxi
System:
  Host: puppypc23565 Kernel: 3.9.11 i686 bits: 32 compiler: gcc v: 4.6.3
  Console: tty 1 dm: N/A Distro: Precise Puppy Linux
Machine:
  Type: Portable System: Dell product: Latitude E6400 v: N/A
  serial: <filter> Chassis: type: 8 serial: <filter>
  Mobo: Dell model: 0P4V15 serial: <filter> BIOS: Dell v: A28
  date: 02/16/2011
Battery:
  BAT-0: charge: N/A condition: 0.4/62.2 Wh (1%) volts: 12.4/11.1
  model: SMP DELL TX28303 type: Li-ion serial: <filter> status: Unknown
Memory:
  Array-1: capacity: 8 GB slots: 2 EC: None max module size: N/A
  Device-1: DIMM_A size: 4 GB speed: 800 MHz type: DDR2 detail: synchronous
  bus width: 64 bits total: 64 bits manufacturer: AD00000000000000
  part-nu: HMP351S6AFR8C-S6 serial: 1040615D
  Device-2: DIMM_B size: No Module Installed
PCI Slots:
  Slot: Adapter 0, Socket 0 type: 32-bit PC Card (PCMCIA) PCMCIA 0
  status: Available length: Other
CPU:
  Topology: Dual Core model: Intel Core2 Duo P9700 type: MCP arch: Penryn
  rev: 10 L2 cache: 6144 KB
  flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 11177
  Speed: 800 MHz min/max: 800/2801 MHz Core speeds: 1: 800 2: 800
Graphics:
  Card-1: NVIDIA G98M [Quadro NVS 160M] driver: nvidia v: 325.15
  bus ID: 01:00.0 chip ID: 10de:06eb
  Display Server: X.Org 1.11.3 driver: nvidia resolution: 1920x1200~60Hz
  OpenGL: renderer: Quadro NVS 160M/PCIe/SSE2 version: 3.3.0 NVIDIA 325.15
  direct render: Yes
Audio:
  Card-1: Intel 82801I (ICH9 Family) HD Audio Controller
  driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:293e
  Sound Server: ALSA v: k3.9.11
Network:
  Card-1: Intel 82567LM Gigabit Network Connection driver: e1000e
  v: 2.2.14-k port: efe0 bus ID: 00:19 chip ID: 8086:10f5
  IF: eth0 state: down mac: <filter>
  Card-2: Intel Ultimate N WiFi Link 5300 driver: iwlwifi v: in-tree:
  bus ID: 0c:00 chip ID: 8086:4235
  IF: wlan0 state: up mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  WAN IP: <filter>
Drives:
  HDD Total Size: 269.05 GB used: 121.51 GB (45.2%)
  ID-1: /dev/sda model: SMART_A25FD-128G size: 120.00 GB serial: N/A
  rev: B9F2
  ID-2: /dev/sdb model: HM160HC size: 149.05 GB serial: N/A
  Floppy-1: /dev/fd0
  Floppy-2: /dev/fd1
  Optical-1: /dev/scd1 vendor: N/A model: N/A rev: N/A dev-links: N/A
  Features: speed: N/A multisession: N/A audio: N/A dvd: N/A rw: none
  state: N/A
  Optical-2: /dev/scd2 vendor: N/A model: N/A rev: N/A dev-links: N/A
  Features: speed: N/A multisession: N/A audio: N/A dvd: N/A rw: none
  state: N/A
  Optical-3: /dev/scd3 vendor: N/A model: N/A rev: N/A dev-links: N/A
  Features: speed: N/A multisession: N/A audio: N/A dvd: N/A rw: none
  state: N/A
  Optical-4: /dev/sr0 vendor: TEAC model: DVD-ROM DV18SA rev: D.0E
  dev-links: cdrom,dvd,scd0
  Features: speed: 24 multisession: yes audio: yes dvd: yes rw: none
  state: running
  Optical-5: /dev/sr1 vendor: N/A model: N/A rev: N/A dev-links: N/A
  Features: speed: N/A multisession: N/A audio: N/A dvd: N/A rw: none
  state: N/A
  Optical-6: /dev/sr2 vendor: N/A model: N/A rev: N/A dev-links: N/A
  Features: speed: N/A multisession: N/A audio: N/A dvd: N/A rw: none
  state: N/A
  Optical-7: /dev/sr3 vendor: N/A model: N/A rev: N/A dev-links: N/A
  Features: speed: N/A multisession: N/A audio: N/A dvd: N/A rw: none
  state: N/A
RAID:
  Message: No RAID data was found.
Partition:
  ID-1: /initrd/mnt/dev_save size: 64.40 GB used: 26.98 GB (41.9%) fs: ext3
  dev: /dev/sda3 label: N/A uuid: N/A
  ID-2: /initrd/pup_rw size: 1.97 GB used: 840.6 MB (41.7%) fs: ext3
  dev: /dev/loop1 label: N/A uuid: N/A
  ID-3: /initrd/pup_ro2 size: 151.0 MB used: 151.0 MB (100.0%) fs: squashfs
  dev: /dev/loop0 label: N/A uuid: N/A
  ID-4: /initrd/pup_ro4 size: 23.0 MB used: 23.0 MB (100.0%) fs: squashfs
  dev: /dev/loop4 label: N/A uuid: N/A
  ID-5: /initrd/pup_ro5 size: 1.6 MB used: 1.6 MB (100.0%) fs: squashfs
  dev: /dev/loop5 label: N/A uuid: N/A
  ID-6: /initrd/pup_ro6 size: 23.6 MB used: 23.6 MB (100.0%) fs: squashfs
  dev: /dev/loop6 label: N/A uuid: N/A
  ID-7: /initrd/pup_ro7 size: 47.9 MB used: 47.9 MB (100.0%) fs: squashfs
  dev: /dev/loop7 label: N/A uuid: N/A
  ID-8: /dev/shm size: 912.7 MB used: 0 KB (0.0%) fs: tmpfs dev: ERR-102
  label: N/A uuid: N/A
  ID-9: /mnt/sda4 size: 15.16 GB used: 9.28 GB (61.2%) fs: fuseblk
  dev: /dev/sda4 label: N/A uuid: N/A
  ID-10: /mnt/sdb2 size: 98.05 GB used: 84.05 GB (85.7%) fs: ext3
  dev: /dev/sdb2 label: N/A uuid: N/A
  ID-11: /initrd/pup_ro8 size: 148.1 MB used: 148.1 MB (100.0%) fs: squashfs
  dev: /dev/loop2 label: N/A uuid: N/A
Unmounted:
  ID-1: /dev/sda1 size: 350.0 MB fs: NTFS label: N/A uuid: N/A
  ID-2: /dev/sda2 size: 39.06 GB fs: NTFS label: N/A uuid: N/A
  ID-3: /dev/sdb1 size: 49.44 GB fs: ext3 label: N/A uuid: N/A
USB:
  Hub: 1:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002
  Hub: 2:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002
  Hub: 2:2 usb: 2.00 type: Cypress CY7C65640 USB-2.0 TetraHub
  chip ID: 04b4:6560
  Device-1: Future Devices Ltd FT232 USB-Serial (UART) IC bus ID: 2:4
  usb: 2.00 type: Vendor Specific Protocol chip ID: 0403:6001
  Device-2: JMicron / JMicron USA JM20337 Hi-Speed USB to SATA & PATA Combo
  Bridge
  bus ID: 2:10 usb: 2.00 type: Mass Storage chip ID: 152d:2338
  Hub: 3:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Hub: 3:2 usb: 2.00
  type: Broadcom BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
  chip ID: 0a5c:4500
  Device-3: Dell Integrated Keyboard bus ID: 3:3 usb: 2.00 type: Keyboard
  chip ID: 413c:8157
  Device-4: Dell Integrated Touchpad / Trackstick bus ID: 3:4 usb: 2.00
  type: Mouse chip ID: 413c:8158
  Hub: 4:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Hub: 5:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Device-5: Broadcom BCM5880 Secure Applications Processor with fingerprint
  swipe sensor
  bus ID: 5:2 usb: 1.10 type: Application Specific Interface
  chip ID: 0a5c:5801
  Hub: 6:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Hub: 7:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Device-6: Microsoft Basic Optical Mouse bus ID: 7:2 usb: 1.10 type: Mouse
  chip ID: 045e:0084
  Hub: 8:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Alert: No repo data detected. Does pinxi support your package manager?
Processes:
  CPU  % used - Command - pid - Memory: MB / % used - top: 5
  1: cpu: 1.4% command: x pid: 5113 mem: 43.8MB (1.0%)
  2: cpu: 0.5% command: palemoon pid: 11792 mem: 139.4MB (3.4%)
  3: cpu: 0.3% command: xfe pid: 17817 mem: 7.71MB (0.1%)
  4: cpu: 0.2% command: conky pid: 5315 mem: 2.90MB (0.0%)
  5: cpu: 0.1% command: [irq/47-iwlwifi] pid: 3931 mem: 0.00MB (0.0%)
  Memory MB/% used - Command - pid - CPU: % used - top: 5
  1: mem: 139.4 MB (0.5%) command: palemoon pid: 11792 cpu: 3.4%
  2: mem: 43.8 MB (1.4%) command: x pid: 5113 cpu: 1.0%
  3: mem: 13.7 MB (0.0%) command: libflashplayer.so
  started by: plugin-container pid: 11871 cpu: 0.3%
  4: mem: 12.5 MB (0.0%) command: rox-filer pid: 5223 cpu: 0.3%
  5: mem: 9.19 MB (0.0%) command: pinxi started by: perl pid: 29808
  cpu: 0.2%
Info:
  Processes: 111 Uptime: 11:04 Memory: 3.95 GB used: 281.7 MB (7.0%)
  Init: SysVinit v: N/A runlevel: 35 Compilers: gcc: 4.6.3 alt: 4.6
  Shell: bash 4.3.27 running in: urxvt pinxi: 2.9.00-422-p
#


Perl 5.14 seems to be available without the devx (additional libs for compiling) but something is missing without the devx.

.

.
Back to top
View user's profile Send private message 
perdido


Joined: 09 Dec 2013
Posts: 949
Location: ¿Altair IV , Just north of Eeyore Junction.?

PostPosted: Thu 15 Mar 2018, 11:27    Post subject:  

Old Compaq laptop that originally had Win Vista
Puppy Precise 5.7.1 devx loaded

Code:

# pinxi -v8z
Made: /root/.local/share/pinxi
System:
  Host: puppypc5705 Kernel: 3.9.11 i686 bits: 32 compiler: gcc v: 4.6.3
  Console: tty 0 dm: N/A Distro: Precise Puppy Linux
Machine:
  Type: Laptop System: Hewlett-Packard
  product: Compaq Presario CQ60 Notebook PC v: PCID serial: <filter>
  Chassis: type: 10 serial: N/A
  Mobo: Hewlett-Packard model: 3612 v: 09.67 serial: <filter>
  BIOS: Hewlett-Packard v: F.65 date: 12/15/2010
Battery:
  BAT-0: charge: 18.6 Wh condition: 21.4/55.1 Wh (39%) volts: 10.8/10.8
  model: LGC-LGC EV06055 type: Li-ion serial: <filter> status: Discharging
Memory:
  Array-1: capacity: 8 GB slots: 2 EC: None max module size: N/A
  Device-1: DIMM0 size: 2 GB speed: 667 MHz type: DDR2 detail: synchronous
  bus width: 64 bits total: 64 bits manufacturer: Samsung
  part-nu: M4 70T5663QZ3-CF7 serial: 935E1643
  Device-2: DIMM2 size: 2 GB speed: 667 MHz type: DDR2 detail: synchronous
  bus width: 64 bits total: 64 bits manufacturer: Samsung
  part-nu: M4 70T5663QZ3-CF7 serial: 935E1787
PCI Slots:
  Slot: 0 type: x16 PCI Express J6B2 status: Available length: Other
  Slot: 0 type: x1 PCI Express J6B1 status: Available length: Other
  Slot: 1 type: x1 PCI Express J6C2 status: Available length: Other
  Slot: 2 type: x1 PCI Express J7B1 status: Available length: Other
  Slot: 3 type: x1 PCI Express J8B3 status: Available length: Other
  Slot: 4 type: x1 PCI Express J8D1 status: Available length: Other
CPU:
  Topology: Dual Core model: Intel Pentium Dual T3400 type: MCP arch: Conroe
  rev: 13 L2 cache: 1024 KB
  flags: lm nx pae sse sse2 sse3 ssse3 bogomips: 8649
  Speed: 1000 MHz min/max: 1000/2166 MHz Core speeds: 1: 1000 2: 1000
Graphics:
  Card-1: Intel Mobile 4 Series Integrated Graphics Controller driver: i915
  v: kernel bus ID: 00:02.0 chip ID: 8086:2a42
  Display Server: X.Org 1.11.3 driver: intel unloaded: vesa,fbdev
  resolution: 1366x768~60Hz
  OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express x86/MMX/SSE2
  version: 2.1 Mesa 8.0.4 direct render: Yes
Audio:
  Card-1: Intel 82801I (ICH9 Family) HD Audio Controller
  driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:293e
  Sound Server: ALSA v: k3.9.11
Network:
  Card-1: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller
  driver: r8169 v: 2.3LK-NAPI port: 3000 bus ID: 01:00 chip ID: 10ec:8136
  IF: eth0 state: down mac: <filter>
  Card-2: Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express)
  driver: ath5k v: kernel bus ID: 02:00 chip ID: 168c:001c
  IF: wlan0 state: down mac: <filter>
  WAN IP: No WAN IP data found. Connected to the web? SSL issues?
Drives:
  HDD Total Size: 247.42 GB used: 5.65 GB (2.3%)
  ID-1: /dev/sda model: TOSHIBA_MK2552GS size: 232.89 GB serial: N/A
  rev: LV01
  ID-2: /dev/sdc model: DataTraveler_2.0 size: 14.54 GB serial: N/A
  rev: PMAP
  Floppy-1: /dev/fd0
  Floppy-2: /dev/fd1
  Optical-1: /dev/scd0 vendor: N/A model: N/A rev: N/A dev-links: N/A
  Features: speed: N/A multisession: N/A audio: N/A dvd: N/A rw: none
  state: N/A
  Optical-2: /dev/scd1 vendor: N/A model: N/A rev: N/A dev-links: N/A
  Features: speed: N/A multisession: N/A audio: N/A dvd: N/A rw: none
  state: N/A
  Optical-3: /dev/scd2 vendor: N/A model: N/A rev: N/A dev-links: N/A
  Features: speed: N/A multisession: N/A audio: N/A dvd: N/A rw: none
  state: N/A
  Optical-4: /dev/scd3 vendor: N/A model: N/A rev: N/A dev-links: N/A
  Features: speed: N/A multisession: N/A audio: N/A dvd: N/A rw: none
  state: N/A
  Optical-5: /dev/sr0 vendor: TSSTcorp model: CDDVDW TS-L633M rev: 0200
  dev-links: cdrom,dvd
  Features: speed: 24 multisession: yes audio: yes dvd: yes
  rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
  Optical-6: /dev/sr1 vendor: N/A model: N/A rev: N/A dev-links: N/A
  Features: speed: N/A multisession: N/A audio: N/A dvd: N/A rw: none
  state: N/A
  Optical-7: /dev/sr2 vendor: N/A model: N/A rev: N/A dev-links: N/A
  Features: speed: N/A multisession: N/A audio: N/A dvd: N/A rw: none
  state: N/A
  Optical-8: /dev/sr3 vendor: N/A model: N/A rev: N/A dev-links: N/A
  Features: speed: N/A multisession: N/A audio: N/A dvd: N/A rw: none
  state: N/A
RAID:
  Message: No RAID data was found.
Partition:
  ID-1: /initrd/mnt/dev_save size: 14.31 GB used: 4.52 GB (31.6%) fs: ext3
  dev: /dev/sdc1 label: N/A uuid: N/A
  ID-2: /initrd/pup_ro1 size: 1.97 GB used: 659.6 MB (32.7%) fs: ext3
  dev: /dev/loop1 label: N/A uuid: N/A
  ID-3: /initrd/pup_ro2 size: 151.0 MB used: 151.0 MB (100.0%) fs: squashfs
  dev: /dev/loop0 label: N/A uuid: N/A
  ID-4: /initrd/pup_ro4 size: 148.1 MB used: 148.1 MB (100.0%) fs: squashfs
  dev: /dev/loop4 label: N/A uuid: N/A
  ID-5: /initrd/pup_ro5 size: 107.1 MB used: 107.1 MB (100.0%) fs: squashfs
  dev: /dev/loop5 label: N/A uuid: N/A
  ID-6: /initrd/pup_ro6 size: 99.0 MB used: 99.0 MB (100.0%) fs: squashfs
  dev: /dev/loop6 label: N/A uuid: N/A
  ID-7: /dev/shm size: 894.1 MB used: 0 KB (0.0%) fs: tmpfs dev: ERR-102
  label: N/A uuid: N/A
Unmounted:
  ID-1: /dev/sda1 size: 117.65 GB fs: NTFS label: N/A uuid: N/A
USB:
  Hub: 1:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002
  Device-1: Realtek USB 2.0 multicard reader bus ID: 1:2 usb: 2.00
  type: Mass Storage chip ID: 0bda:0158
  Device-2: Chicony Ltd Webcam bus ID: 1:3 usb: 2.00 type: Video
  chip ID: 04f2:b091
  Hub: 2:1 usb: 2.00 type: Full speed (or root) hub chip ID: 1d6b:0002
  Device-3: Toshiba Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive
  2 GB / PNY Attache 4GB Stick
  bus ID: 2:2 usb: 2.00 type: Mass Storage chip ID: 0930:6545
  Hub: 3:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Hub: 4:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Hub: 5:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Hub: 6:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Hub: 7:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
  Device-4: Microsoft Basic Optical Mouse bus ID: 7:2 usb: 1.10 type: Mouse
  chip ID: 045e:0084
  Hub: 8:1 usb: 1.10 type: Full speed (or root) hub chip ID: 1d6b:0001
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Alert: No repo data detected. Does pinxi support your package manager?
Processes:
  CPU  % used - Command - pid - Memory: MB / % used - top: 5
  1: cpu: 1.6% command: x pid: 4745 mem: 16.2MB (0.4%)
  2: cpu: 0.8% command: jwm pid: 5041 mem: 7.39MB (0.1%)
  3: cpu: 0.6% command: rox-filer pid: 5170 mem: 9.01MB (0.2%)
  4: cpu: 0.5% command: urxvt pid: 8426 mem: 3.55MB (0.0%)
  5: cpu: 0.2% command: busybox pid: 1 mem: 0.59MB (0.0%)
  Memory MB/% used - Command - pid - CPU: % used - top: 5
  1: mem: 16.2 MB (1.6%) command: x pid: 4745 cpu: 0.4%
  2: mem: 9.13 MB (0.0%) command: pinxi started by: perl pid: 8660 cpu: 0.2%
  3: mem: 9.01 MB (0.6%) command: rox-filer pid: 5170 cpu: 0.2%
  4: mem: 7.39 MB (0.8%) command: jwm pid: 5041 cpu: 0.1%
  5: mem: 6.86 MB (0.1%) command: retrovol pid: 5214 cpu: 0.1%
Info:
  Processes: 92 Uptime: 3 min Memory: 3.86 GB used: 60.1 MB (1.5%)
  Init: SysVinit v: N/A runlevel: 35 Compilers: gcc: 4.6.3 alt: 4.6
  Shell: bash 4.1.0 running in: urxvt pinxi: 2.9.00-422-p
#


.

.
Back to top
View user's profile Send private message 
h2-1

Joined: 14 Mar 2018
Posts: 7

PostPosted: Thu 15 Mar 2018, 15:30    Post subject:  

Code:
wget -O /usr/local/bin/pinxi https://github.com/smxi/inxi/raw/inxi-perl/pinxi


Testers who got the failure to load error can update pinxi and try it again, it doesn't require that module now.

Version 2.9.00-0423-p should correct the failure to import a core module. Puppy is the second distro I've come across that has removed a core module from standard core modules, I can kind of understand it with Puppy since small size is critical, it was less forgiveable with redhat, who really had no excuse.

I've switched that module to use a cascading set of tests, ending in using hostname command.

Technically I'd suggest that puppy packagers of inxi add that module to the dependencies because it's more likely to succeed, but if puppy ships with the command 'hostname' then it should all be fine.

Thanks for the feedback, this is exactly the type of stuff I was looking for.
Back to top
View user's profile Send private message Visit poster's website 
perdido


Joined: 09 Dec 2013
Posts: 949
Location: ¿Altair IV , Just north of Eeyore Junction.?

PostPosted: Thu 15 Mar 2018, 15:50    Post subject:  

h2-1 wrote:
Code:
wget -O /usr/local/bin/pinxi https://github.com/smxi/inxi/raw/inxi-perl/pinxi


Testers who got the failure to load error can update pinxi and try it again, it doesn't require that module now.

Version 2.9.00-0423-p should correct the failure to import a core module. Puppy is the second distro I've come across that has removed a core module from standard core modules, I can kind of understand it with Puppy since small size is critical, it was less forgiveable with redhat, who really had no excuse.

I've switched that module to use a cascading set of tests, ending in using hostname command.

Technically I'd suggest that puppy packagers of inxi add that module to the dependencies because it's more likely to succeed, but if puppy ships with the command 'hostname' then it should all be fine.

Thanks for the feedback, this is exactly the type of stuff I was looking for.


Puppy Precise 5.7.1
Dell e6400 laptop

No devx loaded
Code:

# pinxi -v8z
Can't locate feature.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /usr/lib/perl/5.14/File/Glob.pm line 7.
BEGIN failed--compilation aborted at /usr/lib/perl/5.14/File/Glob.pm line 7.
Compilation failed in require at /usr/bin/pinxi line 2798.
BEGIN failed--compilation aborted at /usr/bin/pinxi line 2798.
#


Still runs with devx loaded.

.
.
Back to top
View user's profile Send private message 
h2-1

Joined: 14 Mar 2018
Posts: 7

PostPosted: Thu 15 Mar 2018, 16:06    Post subject: Perl without core modules?  

It looks like maybe stock Puppy ships without core features for Perl, that's not something I can fix. glob is a required tool, it can't work without it. I can work around individual core modules missing like Sys::Hostname but I can't work around actual core features not being present. Perl without core features/modules isn't very useful, so I'll leave this up to Puppy packagers, and make a note about the issue. Glob isn't a module, it's a function in Perl, it's part of perl itself, so if that is missing, there's nothing I can do beyond suggest the required devx package is added as a dependency of inxi in Puppy.

perdido, your example shows two possible bugs, first, a failure to show a charge of 0, that's an easy mistake to make in Perl, that should be corrected in 2.9.00-424-p

Second is something I've seen in two sets of output, and I can probably fix if someone whose pinxi optical drives show:

/dev/scd0 /dev/scd1 and so on. Those are links to the real /dev locations, and I can tell from the following what is happening there if you paste and run the following code in a terminal, and then show me the output:

Code:
perl -ws -e 'my $f=readlink("/dev/scd0");print "$f\n";'


That is a link, which could be seen in the dev-links in the /dev/sr0 devices lines, so it's possible there's some small change in the output that the programming isn't handling.
Back to top
View user's profile Send private message Visit poster's website 
Display posts from previous:   Sort by:   
Page 1 of 2 [20 Posts]   Goto page: 1, 2 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Cutting edge
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.3407s ][ Queries: 12 (0.0911s) ][ GZIP on ]