Do I need to upgrade tahr? (Solved)
Do I need to upgrade tahr? (Solved)
Hello
I have tahr605 both 32 and 64 bit on a dell vostro 1320, 2.2ghz,2gb ram. They are dated about Dec 2015 and I wondered if they need upgrading to later versions. I am due to reinstall the 32 bit on my system and also install tahr on a friends system so would a later tahr download be a good idea.
Thanks
number77
I have tahr605 both 32 and 64 bit on a dell vostro 1320, 2.2ghz,2gb ram. They are dated about Dec 2015 and I wondered if they need upgrading to later versions. I am due to reinstall the 32 bit on my system and also install tahr on a friends system so would a later tahr download be a good idea.
Thanks
number77
Last edited by number77 on Thu 30 Nov 2017, 18:10, edited 1 time in total.
It is kind of a yes and no answer.
Tahrpup 6.0.5 was kind of a long term use version of Puppy.
It got really tested and bug fixed.
There is a Tahrpup 6.0.6 version.
But not much different than 6.0.5.
Just some tweaks to some files and programs, but not much.
For putting Puppy on other computers.
It is all about the hardware support.
Very new computers are going to need the newer Linux kernels and newer/newest hardware drivers.
Example:
My computer is very new.
Tahrpup6.0.5 runs OK on it, but I did have to add a driver for my network hardware.
Xenialpup 7.5 just had everything needed and runs great on it.
Xenialpup 7.5 is the next step in Ubuntu based Puppies.
It uses some of the newest Linux kernels and newest drivers.
However, the newer kernels and drivers only add to what hardware is supported and maybe fix bugs in older drivers.
But, it can stop supporting old hardware too.
However, it does support a lot of older computers.
Now, you may want to try Xenialpup 7.5
It is using the newest versions of some programs and files.
It probably does give better support to the very newest versions of web browsers.
Those web browsers seem to constantly change and want the latest in everything to work.
Tahrpup 6.0.5 was kind of a long term use version of Puppy.
It got really tested and bug fixed.
There is a Tahrpup 6.0.6 version.
But not much different than 6.0.5.
Just some tweaks to some files and programs, but not much.
For putting Puppy on other computers.
It is all about the hardware support.
Very new computers are going to need the newer Linux kernels and newer/newest hardware drivers.
Example:
My computer is very new.
Tahrpup6.0.5 runs OK on it, but I did have to add a driver for my network hardware.
Xenialpup 7.5 just had everything needed and runs great on it.
Xenialpup 7.5 is the next step in Ubuntu based Puppies.
It uses some of the newest Linux kernels and newest drivers.
However, the newer kernels and drivers only add to what hardware is supported and maybe fix bugs in older drivers.
But, it can stop supporting old hardware too.
However, it does support a lot of older computers.
Now, you may want to try Xenialpup 7.5
It is using the newest versions of some programs and files.
It probably does give better support to the very newest versions of web browsers.
Those web browsers seem to constantly change and want the latest in everything to work.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Thanks bigpup
I have xenial 7.04 on another pc and wouldnt change from tahr 605 for that so xenial 7.05 would need to be a lot better to make me change. I like tahr 605 and know it best, most questions from me to the forum are about tahr, so I will stick to it. If it ain't broke I won't fix it
Thanks for spending your time answering my question.
number77
I have xenial 7.04 on another pc and wouldnt change from tahr 605 for that so xenial 7.05 would need to be a lot better to make me change. I like tahr 605 and know it best, most questions from me to the forum are about tahr, so I will stick to it. If it ain't broke I won't fix it
Thanks for spending your time answering my question.
number77
I upgraded to Tharpup 6.0.6 because my ISP upgraded their gateway and some of my wireless USB dongles couldn't see the new gateway. However maybe they just didn't scan long enough. I don't know, I just thought it was time for an upgrade. Also one of them still could see it but couldn't connect to it. After the upgrade the problem was resolved.
P.S. We had a related problem with the WII. I don't know if my WII can see the gateway yet.
P.S. We had a related problem with the WII. I don't know if my WII can see the gateway yet.
Trusty pup has a serious security flaw: its current glibc is vulnerable and needs to be updated. If I were you, I'd install these two packages to correct the problem:
libc-bin
https://packages.ubuntu.com/trusty-updates/libc-bin
libc6
https://packages.ubuntu.com/trusty-updates/libc6
Then, there is another issue - less severe one - audio is broken in all puppies, except maybe the very latest ones. User jist, was supposed to submit a patch to woof-ce, not sure if he did. Anyway, to be on the safe side, I'd also install the following packages:
libasound2
https://packages.ubuntu.com/trusty/libasound2
linux-sound-base
https://packages.ubuntu.com/trusty/linux-sound-base
alsa-base
https://packages.ubuntu.com/trusty/alsa-base
alsa-utils
https://packages.ubuntu.com/trusty/alsa-utils
libc-bin
https://packages.ubuntu.com/trusty-updates/libc-bin
libc6
https://packages.ubuntu.com/trusty-updates/libc6
Then, there is another issue - less severe one - audio is broken in all puppies, except maybe the very latest ones. User jist, was supposed to submit a patch to woof-ce, not sure if he did. Anyway, to be on the safe side, I'd also install the following packages:
libasound2
https://packages.ubuntu.com/trusty/libasound2
linux-sound-base
https://packages.ubuntu.com/trusty/linux-sound-base
alsa-base
https://packages.ubuntu.com/trusty/alsa-base
alsa-utils
https://packages.ubuntu.com/trusty/alsa-utils
I believe that the glibc updates have been included in the 6.0.6 iso.anikin wrote:Trusty pup has a serious security flaw: its current glibc is vulnerable and needs to be updated. If I were you, I'd install these two packages to correct the problem:
libc-bin
https://packages.ubuntu.com/trusty-updates/libc-bin
libc6
https://packages.ubuntu.com/trusty-updates/libc6
Then, there is another issue - less severe one - audio is broken in all puppies, except maybe the very latest ones. User jist, was supposed to submit a patch to woof-ce, not sure if he did. Anyway, to be on the safe side, I'd also install the following packages:
libasound2
https://packages.ubuntu.com/trusty/libasound2
linux-sound-base
https://packages.ubuntu.com/trusty/linux-sound-base
alsa-base
https://packages.ubuntu.com/trusty/alsa-base
alsa-utils
https://packages.ubuntu.com/trusty/alsa-utils
Trust but verify. Run this command to check to see if your glibc is up to date: and compare the output to the glibc version of your Ubuntu/Debian release here:
https://packages.ubuntu.com/trusty-updates/libc6
or here:
https://packages.debian.org/stretch/libc6
I suspect not only trusty pup is screwed, but *all* the available pups are affected. BTW, glibc is not the only vulnerable component. Debian/Ubuntu are also constantly updating the kernel of their LTS (long term support) releases.
Code: Select all
ldd --version
https://packages.ubuntu.com/trusty-updates/libc6
or here:
https://packages.debian.org/stretch/libc6
I suspect not only trusty pup is screwed, but *all* the available pups are affected. BTW, glibc is not the only vulnerable component. Debian/Ubuntu are also constantly updating the kernel of their LTS (long term support) releases.
I am probably being slow here but what is trusty pup.anikin wrote:Trusty pup has a serious security flaw: its current glibc is vulnerable and needs to be updated. If I were you, I'd install these two packages to correct the problem:
libc-bin
https://packages.ubuntu.com/trusty-updates/libc-bin
libc6
https://packages.ubuntu.com/trusty-updates/libc6
Then, there is another issue - less severe one - audio is broken in all puppies, except maybe the very latest ones. User jist, was supposed to submit a patch to woof-ce, not sure if he did. Anyway, to be on the safe side, I'd also install the following packages:
libasound2
https://packages.ubuntu.com/trusty/libasound2
linux-sound-base
https://packages.ubuntu.com/trusty/linux-sound-base
alsa-base
https://packages.ubuntu.com/trusty/alsa-base
alsa-utils
https://packages.ubuntu.com/trusty/alsa-utils
I believe tahrpup is based on Ubuntu Trusty.number77 wrote:I am probably being slow here but what is trusty pup.anikin wrote:Trusty pup has a serious security flaw: its current glibc is vulnerable and needs to be updated. If I were you, I'd install these two packages to correct the problem:
libc-bin
https://packages.ubuntu.com/trusty-updates/libc-bin
libc6
https://packages.ubuntu.com/trusty-updates/libc6
Then, there is another issue - less severe one - audio is broken in all puppies, except maybe the very latest ones. User jist, was supposed to submit a patch to woof-ce, not sure if he did. Anyway, to be on the safe side, I'd also install the following packages:
libasound2
https://packages.ubuntu.com/trusty/libasound2
linux-sound-base
https://packages.ubuntu.com/trusty/linux-sound-base
alsa-base
https://packages.ubuntu.com/trusty/alsa-base
alsa-utils
https://packages.ubuntu.com/trusty/alsa-utils
number77 wrote:Thanks 243a.
My 605 has ldd (Ubuntu EGLIBC 2.19-0ubuntu6.6) 2.19 so that seems up to date. I will give 606 a try anyway.
Your glibc version is 2.19-0ubuntu6.6 - released on Wed, 25 Feb 2015. Definitely NOT up to date.
The current, Ubuntu Trusty Tahr version is 2.19-0ubuntu6.13 - released on Fri, 16 Jun 2017. This one IS.
There is an option in Tahrpup 6.0.5 to check for updates. One of the updates provided through this facility is a glibc update. I'm not sure if number77 did this but I can provide instructions when I get home.anikin wrote:number77 wrote:Thanks 243a.
My 605 has ldd (Ubuntu EGLIBC 2.19-0ubuntu6.6) 2.19 so that seems up to date. I will give 606 a try anyway.
Your glibc version is 2.19-0ubuntu6.6 - released on Wed, 25 Feb 2015. Definitely NOT up to date.
The current, Ubuntu Trusty Tahr version is 2.19-0ubuntu6.13 - released on Fri, 16 Jun 2017. This one IS.
Yes pleases243a wrote:There is an option in Tahrpup 6.0.5 to check for updates. One of the updates provided through this facility is a glibc update. I'm not sure if number77 did this but I can provide instructions when I get home.anikin wrote:number77 wrote:Thanks 243a.
My 605 has ldd (Ubuntu EGLIBC 2.19-0ubuntu6.6) 2.19 so that seems up to date. I will give 606 a try anyway.
Your glibc version is 2.19-0ubuntu6.6 - released on Wed, 25 Feb 2015. Definitely NOT up to date.
The current, Ubuntu Trusty Tahr version is 2.19-0ubuntu6.13 - released on Fri, 16 Jun 2017. This one IS.
Under Menu/setup/tahr updatesnumber77 wrote:Yes pleases243a wrote:There is an option in Tahrpup 6.0.5 to check for updates. One of the updates provided through this facility is a glibc update. I'm not sure if number77 did this but I can provide instructions when I get home.anikin wrote:
Your glibc version is 2.19-0ubuntu6.6 - released on Wed, 25 Feb 2015. Definitely NOT up to date.
The current, Ubuntu Trusty Tahr version is 2.19-0ubuntu6.13 - released on Fri, 16 Jun 2017. This one IS.
I believe there is an option to update glibc if you are using tharpup 6.0.5
Here is what it says in tahrpup 6.0.6number77 wrote:Thanks 243a.
My 605 has ldd (Ubuntu EGLIBC 2.19-0ubuntu6.6) 2.19 so that seems up to date. I will give 606 a try anyway.
Code: Select all
root# ldd --version
ldd (Ubuntu EGLIBC 2.19-0ubuntu6.9) 2.19
Copyright (C) 2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.
The glibc version in tahrpup 6.0.6 - eglibc 2.19-0ubuntu6.9 was released on Thu, 26 May 2016 01:04:18. Not up to date either and is still far behind the current/secure one:
https://packages.ubuntu.com/trusty-updates/libc6
https://packages.ubuntu.com/trusty-updates/libc6