[RESOLU]tp-link tl-wn823n V2 rtl8192eu tahrpup605 nopae

Post Reply
Message
Author
augras
Posts: 1487
Joined: Mon 11 Nov 2013, 17:37
Location: france

[RESOLU]tp-link tl-wn823n V2 rtl8192eu tahrpup605 nopae

#1 Post by augras »

Bonjour,
un copain, le même qui avait le soucis avec sa clé formatée exfat, que j'ai équipé d'une puppy, raring puis tahrpup, s'est acheté la clé en sujet croyant bien faire puisqu'il est indiqué en gros sur la boite linux support... pas de chance car les sources seulement sont fournies sur le site du constructeur et la compilation par des bien meilleurs que moi n'est pas concluante !
Même sous trusty directement c'est plutôt problématique et je n'ai rien trouvé pour faire fonctionner correctement cette clé.
Elle n'est apparemment même pas détectée par le système !
Avis aux spécialistes.
Merci,
Philippe
Last edited by augras on Sun 05 Mar 2017, 08:44, edited 3 times in total.

augras
Posts: 1487
Joined: Mon 11 Nov 2013, 17:37
Location: france

#2 Post by augras »

Le retour de la commande lsusb

Code: Select all

root# lsusb
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 046d:c05b Logitech, Inc. M-U0004 810-001317 [B110 Optical USB Mouse]
Bus 001 Device 003: ID 17ef:1005 Lenovo 
Bus 001 Device 006: ID 2357:0109  
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
c'est peut-être le device 006 ?

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#3 Post by rcrsn51 »

According to wikidevi, your device uses the rtl8192eu driver, but it is not yet in a main-stream kernel.

There is a driver for it on github that I have built successfully, but it does not recognize your 2357:0109 ID codes.

But it looks like there is a patch for it.

What specific Puppy are you using? I may be able to build the driver for you.

augras
Posts: 1487
Joined: Mon 11 Nov 2013, 17:37
Location: france

#4 Post by augras »

Hi rcrsn51,
Thanks for your quick answer.
I'm with tahrpup6.05CE no pae

Bonjour rcrsn51,
Merci pour ta réponse rapide.
j'utilise tahrpup6.05CE no pae.

Philippe

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#5 Post by rcrsn51 »

augras wrote:I'm with tahrpup6.05CE no pae
Unfortunately, I only have the compiler setup for tahr-6.0.5_PAE and I really don't want to download the non-PAE stuff.

augras
Posts: 1487
Joined: Mon 11 Nov 2013, 17:37
Location: france

#6 Post by augras »

So, What i must do tio compile it ?

Qu'est-ce que je dois faire pour le compiler ?

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#7 Post by rcrsn51 »

Have you ever compiled a kernel module?

Is there a reason that you are using the non-PAE version? This would be much simpler if you would switch to PAE.

augras
Posts: 1487
Joined: Mon 11 Nov 2013, 17:37
Location: france

#8 Post by augras »

I never compiled a module.
Most of my computers are old and no pae.

Je n'ai jamais compilé un module.
La majorité des mes ordinateurs sont anciens et non pae.

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#9 Post by rcrsn51 »

I have posted the 8192eu noPAE driver here. Click the green DOWNLOAD box.

augras
Posts: 1487
Joined: Mon 11 Nov 2013, 17:37
Location: france

#10 Post by augras »

Thanks a lot.
It's very kind of you.
I download and comme back to a feed back.
Philippe

Merci beaucoup,
C'est très sympathique de ta part.
Je télécharge et reviens faire mon rapport.
Philippe
Last edited by augras on Sun 05 Mar 2017, 08:55, edited 1 time in total.

augras
Posts: 1487
Joined: Mon 11 Nov 2013, 17:37
Location: france

#11 Post by augras »

IT WORKS !
Thanks again.
I tried with your Peasywifi.
The level is 100/100 but it is very slow.... but it works.
Philippe

ÇA FONCTIONNE !
Merci encore.
J'ai essayé avec ton Peasywifi.
Le niveau est 100/100 mais c'est très lent... mais ça fonctionne.
Philippe
Last edited by augras on Sun 05 Mar 2017, 08:53, edited 1 time in total.

augras
Posts: 1487
Joined: Mon 11 Nov 2013, 17:37
Location: france

#12 Post by augras »

augras wrote: The level is 100/100 but it is very slow

Le niveau est 100/100 mais c'est très lent
sometimes it is very slow and sometimes it works better.

De temps en temps c'est très lent et de temps en temps cela fonctionne mieux.
Last edited by augras on Sun 05 Mar 2017, 08:52, edited 2 times in total.

Pelo

Si vous voulez acheter un clé Wifi

#13 Post by Pelo »

Si vous voulez acheter un clé Wifi, lisez bien le forum pour faire le bon choix, sinon vous aurez dépensé des euros pour rien.
Un il faut que la clé soit listé dans les modèles Puppy Linux
Deux : il faut que rcrsn51 ait compilé un driver
Trois : il faut que votre operateur soit efficace dans la région
Vu la palanquée de kernels qui voient le jour, peu sont viabilisés par RCRSN51, tapez juste aussi en choississant votre puppy. Déjà entre PAE et non PAE,
Moi je mettais des puppies non PAE, vu que le PAE ne sert strictement à rien.. Et bien erroooor, Notre wifi maker a compilé Tahrpup 605 PAE.

Sur le fond accéder aux réseaux Wifi est bien pratique, il y a de plus en plus de bornes. Faire de l'ordinateur ne doit pas devenir une drogue, mais je préfère mon ordinateur portable à une tablette (clavier) ou à mon smartphone (clavier et ecran riquiqui). Arès il faut aussi la batterie qui tient le coup. C'est pas gagné !

Pelo

Liste des antennes

#14 Post by Pelo »

liste des antennes Merci d'ajouter la v^otre si vous en êtes contents :). Les beaux jours approchent, on est mieux dehors.
How to compile rtl8192eu driver? wognath I recently purchased a tp-link TL-WN822N V4
Last edited by Pelo on Wed 19 Apr 2017, 10:30, edited 3 times in total.

augras
Posts: 1487
Joined: Mon 11 Nov 2013, 17:37
Location: france

#15 Post by augras »

Hi rcrsn51,
this morning everything works fine : i get the same thing in download/upload/ping than with ethernet.
Yesterday i have rebooted one time but maybe it wasn't enought !
A great THANKS for my friend.
Philippe

Bonjour rcrsn51,
ce matin tout fonctionne bien : j'obtients la même chose en téléchargement/envoi/ping qu'en éthernet.
Hier j'avais redémarré une fois mais peut-être que ça ne suffisait pas !
Un grand merci pour mon ami.
Philippe

Wognath
Posts: 423
Joined: Sun 19 Apr 2009, 17:23

#16 Post by Wognath »

rcrsn51, thank you for the 8192eu no-PAE driver pet. There is no problem with WPA2 as I thought at first.

Rcrsn51, merci pour 8192eu noPAE driver pet. Il fonctionne bien. Il n'y a pas de problème avec WPA2 comme j'ai d'abord pensé.

stevtheoldie
Posts: 1
Joined: Wed 26 Apr 2017, 09:04
Location: UK

#17 Post by stevtheoldie »

Thank you rcrsn51 for providing the tahrpup 6.05
noPAE driver. I’d bought a cheap wifi usb adapter, it had been advertised as having good range (No mention of the Realtek RTL8192EU chip though) and was having difficulties getting it to work.
Also thank you augras for posting this thread. I’d looked through quite a few google links, trying to find a solution, before finding this

Merci rcrsn51 pour fournir le tahrpup 6.05
Pilote NoPAE. J'avais acheté un adaptateur wifi usb bon marché, il avait été annoncé comme ayant une bonne gamme (sans mention de la puce Realtek RTL8192EU) et avait des difficultés pour le faire fonctionner.
Merci également à Augras d'avoir posté ce fil. J'avais regardé à travers quelques liens de Google, essayant de trouver une solution, avant de trouver cela.

Post Reply