There's a lot of apps that simply will not load for me when I try to run them. A few examples are Dosemu, ZSNES, and the alternative Puppy Software Installer. When I click on them from Menu -> DotPups, absolutely nothing happens. Why is this?
I should also note that I can get Azureus to run, but after about 30 seconds or so the application freezes, much like it would freeze in Windows XP. It just sits there displaying the same menu, no matter what I click. It won't close either, unless I Kill it.
It happens significantly less then application freezes, but sometimes the entire OS locks up, including my mouse cursor. This happened today when I was running LimeWire and the CPU-usage bar went totally red. Is there anything I can do to prevent this?
Oh, and one more unrelated issue.... I can't compile any tar balls! I tried to do it with Dosemu, and couldn't, before I found a .pup for it. I KNOW I followed all the instructions perfectly. I put the source in /usr/src/, read the INSTALL and READMEs, opened the console and tried to Makefile, but I get a 'permission denied' error.
Many apps don't work at all; frequent lockups
-
brad_chuck
- Posts: 286
- Joined: Tue 16 Aug 2005, 03:47
- Location: Appalachian Mountains
wow
Hi,
Sounds like you are havening trouble all over the place.. First off Puppy does not ship with the ability to compile source tar balls. The distro is something like 90% smaller than most distros so as you would expect some things are left out.
To fix this your must install a file named devx_213.sfs the instructions for doing this is here. It's at the bottom under C/C++ Compileing
http://www.puppylinux.com/hard-puppy.htm
and the file is here
http://www.puppyos.net/test/
About the locking up... Don't know what is going on there but it is most likely a bad dotpup or a conflict with librarys... nasty stuff
As of today Puppy does not do so well with dependences but Barry is working on this with the PET package manager. So hang in there..
You may have to do a reinstall...
Post more info about your install and I or someone else will try to help you patch it up..
Sounds like you are havening trouble all over the place.. First off Puppy does not ship with the ability to compile source tar balls. The distro is something like 90% smaller than most distros so as you would expect some things are left out.
To fix this your must install a file named devx_213.sfs the instructions for doing this is here. It's at the bottom under C/C++ Compileing
http://www.puppylinux.com/hard-puppy.htm
and the file is here
http://www.puppyos.net/test/
About the locking up... Don't know what is going on there but it is most likely a bad dotpup or a conflict with librarys... nasty stuff
As of today Puppy does not do so well with dependences but Barry is working on this with the PET package manager. So hang in there..
You may have to do a reinstall...
Post more info about your install and I or someone else will try to help you patch it up..
-
brad_chuck
- Posts: 286
- Joined: Tue 16 Aug 2005, 03:47
- Location: Appalachian Mountains
?
What was the last dotpup you installed before the problems started happening?
-
Pizzasgood
- Posts: 6183
- Joined: Wed 04 May 2005, 20:28
- Location: Knoxville, TN, USA
Usually there is a script named 'configure' that you run first. It would have parameters to configure things about the program, like disabling different parts, or installing to an alternate directory. Usually you don't need any of them, just run it. After that you just run 'make' to compile, and 'make install' to install.
If there is no 'configure' script, you just skip that step.
Also useful to know:
starts fresh, with nothing compiled or configured
sometimes will uninstall it
Code: Select all
cd /wherever/
./configure
make
make installAlso useful to know:
Code: Select all
make cleanCode: Select all
make uninstall[size=75]Between depriving a man of one hour from his life and depriving him of his life there exists only a difference of degree. --Muad'Dib[/size]
[img]http://www.browserloadofcoolness.com/sig.png[/img]
[img]http://www.browserloadofcoolness.com/sig.png[/img]
This happen sometimes when you're out of disk space. Is your pup_save.*fs full?¿ If the answer is yes, make it bigger. And, don't forget to set the "tmp" directory to somewhere else(another ext3/ext2 partition) if you're planning to still using Azureus or any similar app.VinceIP wrote:There's a lot of apps that simply will not load for me when I try to run them. A few examples are Dosemu, ZSNES, and the alternative Puppy Software Installer. When I click on them from Menu -> DotPups, absolutely nothing happens. Why is this?
I should also note that I can get Azureus to run, but after about 30 seconds or so the application freezes, much like it would freeze in Windows XP. It just sits there displaying the same menu, no matter what I click. It won't close either, unless I Kill it.
[url=http://www.puppylinux.com][img]http://i.imgur.com/M4OyHe1.gif[/img][/url]
-
newbie_tom
- Posts: 6
- Joined: Thu 01 Feb 2007, 00:46
Same here !
I am having exactly the same problem.
I am new to puppy and linux - 2 days experience so far but am getting the same crashes by the sounds of it.
My Setup
Puppy 2.13, Limewire Pro, Firefox, Wine & open office.
When first running i was getting constant crashes until i installed the Nvidia drivers for my gfx card - this seems to have cured nearly all of them.
The whole system hangs regularly when i am using limewire, particularly when browsing at the sametime (firefox or seamonkey) and also many of my apps do not work - just click on them and nothing.
As far as the limewire/crash problem - i have plenty of disc space; i'm running with a 3gb swap and have 550Mb left on my save file.
PC is AMD XP64x2
512MB GeForce 6600
1GB Ram
I was wondering if there is an issue with Java and this version of puppy??
or maybe a graphics card issue?
Or maybe an issue with limewire?? (all saved limewire downloads are going to a separate drive to any puppy stuff so i dont think its space)
Any advice would be greatly appreciated - my knowledge of computers is very limited and i would really like to get these glitches sorted and keep running puppy.
Cheers
Tom
I am new to puppy and linux - 2 days experience so far but am getting the same crashes by the sounds of it.
My Setup
Puppy 2.13, Limewire Pro, Firefox, Wine & open office.
When first running i was getting constant crashes until i installed the Nvidia drivers for my gfx card - this seems to have cured nearly all of them.
The whole system hangs regularly when i am using limewire, particularly when browsing at the sametime (firefox or seamonkey) and also many of my apps do not work - just click on them and nothing.
As far as the limewire/crash problem - i have plenty of disc space; i'm running with a 3gb swap and have 550Mb left on my save file.
PC is AMD XP64x2
512MB GeForce 6600
1GB Ram
I was wondering if there is an issue with Java and this version of puppy??
or maybe a graphics card issue?
Or maybe an issue with limewire?? (all saved limewire downloads are going to a separate drive to any puppy stuff so i dont think its space)
Any advice would be greatly appreciated - my knowledge of computers is very limited and i would really like to get these glitches sorted and keep running puppy.
Cheers
Tom
-
brad_chuck
- Posts: 286
- Joined: Tue 16 Aug 2005, 03:47
- Location: Appalachian Mountains
hi
Hi Tom, Welcome.
I have not seen your system but I have tryed limewire on my system and as I r ember it sank like a rock! The one I was using at the time was a P4 3.2 Ghz 670 MB Ram............
Use aMule, it is not as fast but it is GTK.
http://dotpups.de/dotpups/Libraries/WxG ... ode.tar.gz
http://dotpups.de/dotpups/Peer_2_Peer/a ... 1.3.tar.gz
Or if you have to have something like limewire frostwire works ok to.
I have not seen your system but I have tryed limewire on my system and as I r ember it sank like a rock! The one I was using at the time was a P4 3.2 Ghz 670 MB Ram............
Use aMule, it is not as fast but it is GTK.
http://dotpups.de/dotpups/Libraries/WxG ... ode.tar.gz
http://dotpups.de/dotpups/Peer_2_Peer/a ... 1.3.tar.gz
Or if you have to have something like limewire frostwire works ok to.
-
newbie_tom
- Posts: 6
- Joined: Thu 01 Feb 2007, 00:46
Thanks brad will give it a go.
Problem with apps not running cured! (i think)
Running PPracer in console i found i was missing a library:
ref here..
http://murga-linux.com/puppy/viewtopic. ... 805&t=2482
Once i installed the library it worked perfectly - also zsnes now loads up - i was getting nothing before (although i have no roms yet to try on it)
Problem with apps not running cured! (i think)
Running PPracer in console i found i was missing a library:
ref here..
http://murga-linux.com/puppy/viewtopic. ... 805&t=2482
Once i installed the library it worked perfectly - also zsnes now loads up - i was getting nothing before (although i have no roms yet to try on it)