(OLD) (ARCHIVED) Puppy Linux Discussion Forum Forum Index (OLD) (ARCHIVED) Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info

This forum can also be accessed as http://oldforum.puppylinux.com
It is now read-only and serves only as archives.

Please register over the NEW forum
https://forum.puppylinux.com
and continue your work there. Thank you.

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups    
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Mon 28 Sep 2020, 09:08
All times are UTC - 4
 Forum index » Advanced Topics » Puppy Derivatives
LxPup : a Puppy with LXDE as its desktop environment
Moderators: Flash, JohnMurga
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies. View previous topic :: View next topic
Page 44 of 68 [1020 Posts]   Goto page: Previous 1, 2, 3, ..., 42, 43, 44, 45, 46, ..., 66, 67, 68 Next
Author Message
newpet

Joined: 08 May 2015
Posts: 30

PostPosted: Fri 08 May 2015, 16:52    Post subject: pet oddity  

to be exact:

- LxPup 15.03.1 pae
- installed on a usb stick from CD
- original and unmodified installation

problem:

Every time I click on 'puppy package manager', system tries to connect to a google server. This weird behaviour can easily be checked out with a simple traffic monitor like iftop or similar. Relevant dns queries are shown as well.
First time I notice something like that in a puppy version. I'm not an expert, so I wonder if I have to consider this as normal.

any contrib is appreciated
Back to top
View user's profile Send private message 
Gooplusplus


Joined: 04 Sep 2013
Posts: 35
Location: Las Vegas

PostPosted: Sat 09 May 2015, 11:51    Post subject: Broken HTML5 Audio (MP3 and M4A)
Subject description: solution: add gstream1.0-plugins-ugly
 

LxPup Tahr (and probably any Puppy distro with Firefox/Pale Moon) has broken HTML5 Audio compatibility. It tries to download instead of play MP3 and M4A files.

I have a hobby radio jukebox site that works fine in all major Windows web browsers except Opera. It also works fine with Chrome/Chromium on any platform. It also works fine with Xubuntu Firefox and Kubuntu Firefox. However, it does not work with Firefox in most other Ubuntu variants nor in LxPupTahr's Pale Moon.

http://www.gooplusplus.com/jukebox

From the sites below, I discovered that MP3 and AAC (M4A) were enabled in Xubuntu and Kubuntu but not in other Ubuntu variants:

https://html5test.com/ --- and --- http://hpr.dogphilosophy.net/test/

After searching around a bit, I found the solution on the Crunchbang Linux forums.

UPDATE:
using SYNAPTIC, add gstreamer1.0-libav -or- gstreamer1.0-plugins-ugly

or from Ubuntu Software Center, add Gstreamer extra plugins


Last edited by Gooplusplus on Sat 09 May 2015, 21:51; edited 4 times in total
Back to top
View user's profile Send private message 
peebee


Joined: 21 Sep 2008
Posts: 4391
Location: Worcestershire, UK

PostPosted: Sat 09 May 2015, 12:00    Post subject: Re: pet oddity  

newpet wrote:
to be exact:

- LxPup 15.03.1 pae
- installed on a usb stick from CD
- original and unmodified installation

problem:

Every time I click on 'puppy package manager', system tries to connect to a google server. This weird behaviour can easily be checked out with a simple traffic monitor like iftop or similar. Relevant dns queries are shown as well.
First time I notice something like that in a puppy version. I'm not an expert, so I wonder if I have to consider this as normal.

any contrib is appreciated


Looks like
/usr/local/petget/service_pack.sh
which is part of ppm2
is pinging google to determine if a connection to the internet has been enabled.

You can edit the pings if you don't like this.....

Cheers
peebee

_________________
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Back to top
View user's profile Send private message Visit poster's website 
newpet

Joined: 08 May 2015
Posts: 30

PostPosted: Sat 09 May 2015, 13:01    Post subject:  Re: pet oddity  

peebee wrote:

Looks like
/usr/local/petget/service_pack.sh
which is part of ppm2
is pinging google to determine if a connection to the internet has been enabled.

You can edit the pings if you don't like this.....

Cheers
peebee


Solved !
Thank you very much, Peebee Wink
Back to top
View user's profile Send private message 
yr1945

Joined: 17 Apr 2010
Posts: 212

PostPosted: Sat 09 May 2015, 13:38    Post subject:  

I wonder what else goes on behind our back with puppylinux?

I understand Google is a great company and lots of people use it. That's fine by me... however, I try to stay as far from Google as possible.

I will never use LxPup.
Back to top
View user's profile Send private message 
yr1945

Joined: 17 Apr 2010
Posts: 212

PostPosted: Sat 09 May 2015, 13:43    Post subject:  

Does anyone know if BK's "official" pups ping Google servers... or, something similar?
Back to top
View user's profile Send private message 
peebee


Joined: 21 Sep 2008
Posts: 4391
Location: Worcestershire, UK

PostPosted: Sat 09 May 2015, 14:20    Post subject:  

yr1945 wrote:
I will never use LxPup.


or any puppy including ppm2??

I've reported the concerns over on the ppm2 thread.

in the meantime simply edit to ping a website you do trust Wink

_________________
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Back to top
View user's profile Send private message Visit poster's website 
666philb


Joined: 07 Feb 2010
Posts: 3635
Location: wales ... by the sea

PostPosted: Sat 09 May 2015, 14:26    Post subject:  

it's not a ppm2 thing... it has been in all woof built pups from wary onwards

and is just a simple ping to test internet connection

_________________
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Back to top
View user's profile Send private message 
newpet

Joined: 08 May 2015
Posts: 30

PostPosted: Sat 09 May 2015, 14:27    Post subject:  

'Shocked'
Last edited by newpet on Thu 08 Sep 2016, 03:59; edited 2 times in total
Back to top
View user's profile Send private message 
caiosama


Joined: 02 Jan 2015
Posts: 104
Location: Concepcion, Chile

PostPosted: Mon 11 May 2015, 13:06    Post subject:  

Full installed LxpupVivid on my brand new Lenovo G4070.

Man, this is a proper super-distro!, powerful, fast yet small (c`mon, 500 MB in these days are nothing!), no bugs found yet... all configured, all drivers detected (only i had to select the sound card). Installed Chrome from the DEB directly from the Google web, installed Conky, all great.

My congratulations to the developers!

Probably it will become my favorite Puppy Distro.

_________________
Pupjibaro 1.0.4 2015 / LxpupTahr 15.05.2 - Live USB - Dell D630
Precise 5.7.1 - Full installation - Asus EeePC 701 4G (2 GB RAM)
Carolina Vanguard Frugal /Arch Linux Antergos - Lenovo G4070

Back to top
View user's profile Send private message 
xstylezx

Joined: 14 Nov 2007
Posts: 28

PostPosted: Mon 11 May 2015, 17:00    Post subject:  

This is a pretty great creation! I have many questions, but will start easy.lol

Im just curious how to get video thumbnails in pcmanfm? Ive tried googling and there are many suggestions, but Id prefer to not try installing a ton of packages and gumming anything up. I have tried installing ffmpegthumbnailer package from PPM, but no video thumbnails. Ive also set the thumbnail size to 0 in pcmanfm settings so that cant be it. Im wondering if I need to put something into the ~/.thumbnails folder to get it going. Any help is greatly appreciated!
Back to top
View user's profile Send private message 
newpet

Joined: 08 May 2015
Posts: 30

PostPosted: Mon 11 May 2015, 17:19    Post subject:  

google pinging:

Just in the case you don't like it:

- change the url

or

- comment lines 3,4,5,6,7

or, in iptables:

-A OUTPUT -p icmp -m icmp --icmp-type 8 -j DROP

done.
2015-05-11.jpg
 Description   
 Filesize   36.88 KB
 Viewed   1106 Time(s)

2015-05-11.jpg


Last edited by newpet on Tue 07 Jul 2015, 06:19; edited 1 time in total
Back to top
View user's profile Send private message 
peebee


Joined: 21 Sep 2008
Posts: 4391
Location: Worcestershire, UK

PostPosted: Wed 13 May 2015, 04:18    Post subject:  

xstylezx wrote:
Im just curious how to get video thumbnails in pcmanfm?

https://wiki.archlinux.org/index.php/PCManFM#Thumbnail_support says:
Quote:
PCManFM supports image thumbnails out of the box. However, in order to view thumbnails of other file types, PCManFM uses the information provided in the files located at /usr/share/thumbnailers. The packages which provide a thumbnailer usually add the corresponding .thumbnail file at /usr/share/thumbnailers. For example, in order to get thumbnails for OpenDocument files, you may install libgsf from the official repositories. For video files' thumbnails, the package ffmpegthumbnailer is required.

For LxPup (i.e. the Slackware flavour) you can get from:
http://ponce.cc/slackware/slackware-14.1/packages/ffmpegthumbnailer-2.0.9-i486-1ponce.txz

For LxPupTahr - I believe that TahrPup does not include ffmpeg (???) so presumably ffmpegthumbnailer maybe won't work unless ffmpeg is also installed....
666philb wrote:
tahrpup has a fork of ffmpeg called libav.


LxPup does not ship with /usr/share/thumbnailers

Let us know if you get it to work - but please say which flavour of LxPup you are using.

Cheers
peebee

_________________
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Back to top
View user's profile Send private message Visit poster's website 
caiosama


Joined: 02 Jan 2015
Posts: 104
Location: Concepcion, Chile

PostPosted: Wed 13 May 2015, 10:18    Post subject:  

Guys

A question about LxpupVivid on the Lenovo G4070

The sound on some boots are quite bad....sounds saturated. Reboot and the problem is fixed. There`s a way to fix this permanently?

Code:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.5-vivid_PAE-32-pae (root@puppypc15129) (gcc version 4.6.4 (Ubuntu/Linaro 4.6.4-6ubuntu2) ) #1 SMP Mon Apr 27 11:12:29 GMT-8 2015
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000a56affff] usable
BIOS-e820: [mem 0x00000000a56b0000-0x00000000a5eaffff] reserved
BIOS-e820: [mem 0x00000000a5eb0000-0x00000000aaabefff] usable
BIOS-e820: [mem 0x00000000aaabf000-0x00000000aaebefff] reserved
BIOS-e820: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS
BIOS-e820: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data
BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable
BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20369/Lancer 4A2, BIOS 9ACN29WW 10/20/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x14f600 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-E7FFF write-protect
  E8000-EFFFF write-combining
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7E00000000 write-back
  1 base 00AB000000 mask 7FFF000000 uncachable
  2 base 00AC000000 mask 7FFC000000 uncachable
  3 base 00B0000000 mask 7FF0000000 uncachable
  4 base 00C0000000 mask 7FC0000000 uncachable
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC 
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 2736MB, range: 16MB, type UC
reg 2, base: 2752MB, range: 64MB, type UC
reg 3, base: 2816MB, range: 256MB, type UC
reg 4, base: 3GB, range: 1GB, type UC
total RAM covered: 6832M
Found optimal setting for mtrr clean up
 gran_size: 64K    chunk_size: 64K    num_reg: 6     lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2560MB, range: 128MB, type WB
reg 3, base: 2688MB, range: 32MB, type WB
reg 4, base: 2720MB, range: 16MB, type WB
reg 5, base: 4GB, range: 4GB, type WB
e820: update [mem 0xab000000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
initial memory mapped: [mem 0x00000000-0x05ffffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
 [mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x20000000-0x377fffff]
 [mem 0x20000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
 [mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x05a6c000, 0x05a6cfff] PGTABLE
BRK [0x05a6d000, 0x05a6dfff] PGTABLE
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000FE020 000024 (v02 LENOVO)
ACPI: XSDT 0xAAFFE210 0000B4 (v01 LENOVO CB-01    00000001      01000013)
ACPI: FACP 0xAAFF7000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: DSDT 0xAAFE4000 00F4BB (v02 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: FACS 0xAAFBA000 000040
ACPI: SLIC 0xAAFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: UEFI 0xAAFFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: FPDT 0xAAFFA000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: POAT 0xAAFF9000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: ASF! 0xAAFF8000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: HPET 0xAAFF6000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: APIC 0xAAFF5000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: MCFG 0xAAFF4000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: WDAT 0xAAFE3000 000224 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0xAAFE0000 002028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: BOOT 0xAAFDE000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: LPIT 0xAAFDD000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: ASPT 0xAAFDB000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: DBGP 0xAAFDA000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0xAAFD2000 000494 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0xAAFD1000 000AD8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0xAAFCD000 0034F8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
4474MB HIGHMEM available.
891MB LOWMEM available.
  mapped low ram: 0 - 37bfe000
  low ram: 0 - 37bfe000
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  Normal   [mem 0x01000000-0x37bfdfff]
  HighMem  [mem 0x37bfe000-0x4f5fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009cfff]
  node   0: [mem 0x00100000-0xa56affff]
  node   0: [mem 0xa5eb0000-0xaaabefff]
  node   0: [mem 0xaafff000-0xaaffffff]
  node   0: [mem 0x00000000-0x4f5fffff]
Initmem setup node 0 [mem 0x00001000-0x4f5fffff]
On node 0 totalpages: 1022044
  DMA zone: 40 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  Normal zone: 2190 pages used for memmap
  Normal zone: 224254 pages, LIFO batch:31
  HighMem zone: 793794 pages, LIFO batch:31
Using APIC driver default
Reserving Intel graphics stolen memory at 0xaba00000-0xaf9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 15 pages/cpu @f4e74000 s30848 r0 d30592 u61440
pcpu-alloc: s30848 r0 d30592 u61440 alloc=15*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1019814
Kernel command line: root=/dev/sda1 ro vga=normal
log_buf_len individual max cpu contribution: 131072 bytes
log_buf_len total cpu_extra contributions: 917504 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 2097152 bytes
early log buf free: 251532(95%)
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Initializing HighMem for node 0 (00037bfe:0014f600)
Initializing Movable for node 0 (00000000:00000000)
Memory: 4027944K/4088176K available (6754K kernel code, 499K rwdata, 2204K rodata, 492K init, 476K bss, 60232K reserved, 0K cma-reserved, 3175176K highmem)
virtual kernel memory layout:
    fixmap  : 0xfff17000 - 0xfffff000   ( 928 kB)
    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
      .init : 0xc5940000 - 0xc59bb000   ( 492 kB)
      .data : 0xc5698ee4 - 0xc593ed00   (2711 kB)
      .text : 0xc5000000 - 0xc5698ee4   (6755 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:760 16
CPU 0 irqstacks, hard=f440c000 soft=f440e000
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 1696.064 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.12 BogoMIPS (lpj=1696064)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 36K (c59bb000 - c59c4000)
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i3-4005U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
CPU 1 irqstacks, hard=f44d8000 soft=f44da000
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
Initializing CPU#1
CPU 2 irqstacks, hard=f44e4000 soft=f44e6000
 #2
Initializing CPU#2
CPU 3 irqstacks, hard=f4508000 soft=f450a000
 #3
Initializing CPU#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (13568.51 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xaaebf000-0xaafbefff] (1048576 bytes)
xor: automatically using best checksumming function:
   avx       : 14172.000 MB/sec
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
raid6: mmxx1     3140 MB/s
raid6: mmxx2     3203 MB/s
raid6: sse1x1    2718 MB/s
raid6: sse1x2    3230 MB/s
raid6: sse2x1    5464 MB/s
raid6: sse2x2    6550 MB/s
raid6: avx2x1   10582 MB/s
raid6: avx2x2   11785 MB/s
raid6: using algorithm avx2x2 (11785 MB/s)
raid6: using avx2x1 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF3E00C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF3DF9000 0005AA (v01 PmRef  ApIst    00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF3DF4400 000119 (v01 PmRef  ApCst    00003000 INTL 20121220)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xc0610000-0xc0613fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xc0600000-0xc060ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc0618000-0xc061801f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc0614000-0xc0617fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc061c000-0xc061c3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c45] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc061b000-0xc061b7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc0619000-0xc06190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io  0x3000-0x30ff]
pci 0000:01:00.0: reg 0x18: [mem 0xc0504000-0xc0504fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xc0500000-0xc0503fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.0:   bridge window [mem 0xc0500000-0xc05fffff]
pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xc0400000-0xc047ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3:   bridge window [mem 0xc0400000-0xc04fffff]
pci_bus 0000:00: on NUMA node 0
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0xa56b0000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xaaabf000-0xabffffff]
e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
Switched to clocksource refined-jiffies
pnp: PnP ACPI init
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0x1800-0x18fe] could not be reserved
system 00:00: [io  0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs SYN2b36 PNP0f13 SYN0002 SYN2b00 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xafa20000-0xafa20fff] has been reserved
system 00:05: [mem 0xafa10000-0xafa1ffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
Switched to clocksource acpi_pm
pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.0:   bridge window [mem 0xc0500000-0xc05fffff]
pci 0000:02:00.0: BAR 6: assigned [mem 0xc0480000-0xc048ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3:   bridge window [mem 0xc0400000-0xc04fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xc0500000-0xc05fffff]
pci_bus 0000:02: resource 1 [mem 0xc0400000-0xc04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Simple Boot Flag at 0x44 set to 0x1
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
zpool: loaded
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ntfs: driver 2.1.31 [Flags: R/W].
fuse init (API version 7.23)
SGI XFS with ACLs, security attributes, realtime, no debug enabled
aufs 3.19-20150427
Key type big_key registered
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
HP CISS Driver (v 3.6.26)
nbd: registered device at major 43
mtip32xx Version 1.3.1
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xc061b000 port 0xc061b100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xc061b000 port 0xc061b180 irq 42
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.20
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.5-vivid_PAE-32-pae xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.5-vivid_PAE-32-pae xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: failed to peer usb2-port2 and usb1-port2 by location (usb2-port2:none) (usb1-port2:usb2-port1)
usb usb2-port2: failed to peer to usb1-port2 (-16)
usb: port power management may be unreliable
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xc061c000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.5-vivid_PAE-32-pae ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver
Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
4Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-realtek
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver usbtest
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Driver 'mmcblk' needs updating - please use bus_type methods
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
usbcore: registered new interface driver vub300
sdhci-pltfm: SDHCI platform and OF driver helper
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Loaded X.509 cert 'Magrathea: Glacier signing key: 0113b195f3557f4794a183ec097b736f1790f522'
registered taskstats version 1
Btrfs loaded
rtc_cmos 00:01: setting system clock to 2015-05-13 17:57:44 UTC (1431539864)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 3-1: new high-speed USB device number 2 using ehci-pci
ata1.00: ATA-8: ST500LT012-1DG142, 0002LVM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
usb 1-1: new low-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=8087, idProduct=8000
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST500LT012-1DG14 LVM1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: New USB device found, idVendor=04b3, idProduct=310c
usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1: Product: USB Optical Mouse
usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:04B3:310C.0001/input/input5
hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1/input0
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-4: new high-speed USB device number 3 using xhci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: MATSHITA DVD-RAM UJ8FBS, F801, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8FBS   F801 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (244)
usb 1-4: New USB device found, idVendor=0bda, idProduct=0129
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: USB2.0-CRW
usb 1-4: Manufacturer: Generic
usb 1-4: SerialNumber: 20100201396000000
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
tsc: Refined TSC clocksource calibration: 1696.073 MHz
usb 1-6: new high-speed USB device number 4 using xhci_hcd
usb 1-6: New USB device found, idVendor=5986, idProduct=0652
usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6: Product: Lenovo EasyCamera
usb 1-6: Manufacturer: Generic
usb 1-6: SerialNumber: 200901010001
usb 1-7: new full-speed USB device number 5 using xhci_hcd
usb 1-7: New USB device found, idVendor=0cf3, idProduct=3004
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
EXT4-fs (sda1): recovery complete
random: nonblocking pool is initialized
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
devtmpfs: mounted
Freeing unused kernel memory: 492K (c5940000 - c59bb000)
Switched to clocksource tsc
EXT4-fs (sda1): re-mounted. Opts: data=ordered
floppy0: no floppy controllers found
work still pending
udevd[1997]: starting eudev version 1.0
udevd[2007]: '/sbin/pup_event_backend_modprobe' [2008] terminated by signal 15 (Terminated)
udevd[2035]: '/sbin/pup_event_backend_modprobe' [2145] terminated by signal 15 (Terminated)
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP0] (on-line)
psmouse serio1: synaptics: queried max coordinates: x [..5702], y [..4886]
psmouse serio1: synaptics: queried min coordinates: x [1240..], y [964..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x2a800, board id: 2847, fw id: 1589295
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery absent)
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input7
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
ACPI Warning: SystemIO range 0x00004040-0x0000405f conflicts with OpRegion 0x00004040-0x0000404f (\_SB_.PCI0.SBUS.SMBI) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
sound hdaudioC1D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
sound hdaudioC1D0:    mono: mono_out=0x0
sound hdaudioC1D0:    inputs:
sound hdaudioC1D0:      Internal Mic=0x1a
sound hdaudioC1D0:      Mic=0x19
sound hdaudioC1D0: Enable sync_write for stable communication
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf848c000, 68:f7:28:91:63:eb, XID 10900880 IRQ 47
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
cfg80211: Calling CRDA to update world regulatory domain
ath: phy0: WB335 2-ANT card detected
ath: phy0: Set BT/WLAN RX diversity capability
ath: phy0: Enable LNA combining
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xf9300000, irq=19
input: PC Speaker as /devices/platform/pcspkr/input/input14
usbcore: registered new interface driver rtsx_usb
udevd[2035]: '/sbin/pup_event_backend_modprobe' [6092] terminated by signal 15 (Terminated)
Linux video capture interface: v2.00
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usb 1-7: Direct firmware load for ar3k/AthrBT_0x31010000.dfu failed with error -2
Bluetooth: Patch file not found ar3k/AthrBT_0x31010000.dfu
Bluetooth: Loading patch file failed
ath3k: probe of 1-7:1.0 failed with error -2
usbcore: registered new interface driver ath3k
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0652)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
Adding 20479996k swap on /dev/sda2.  Priority:-1 extents:1 across:20479996k FS
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[drm:hsw_unclaimed_reg_detect.isra.5 [i915]] *ERROR* Unclaimed register detected. Please use the i915.mmio_debug=1 to debug this problem.
[drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[drm:hsw_unclaimed_reg_detect.isra.5 [i915]] *ERROR* Unclaimed register detected. Please use the i915.mmio_debug=1 to debug this problem.
[drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
wlan0: authenticate with 00:1d:2e:61:37:01
wlan0: send auth to 00:1d:2e:61:37:01 (try 1/3)
wlan0: authenticated
ath9k 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 00:1d:2e:61:37:01 (try 1/3)
wlan0: RX AssocResp from 00:1d:2e:61:37:01 (capab=0x431 status=0 aid=2)
wlan0: associated
r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168g-3.fw failed with error -2
r8169 0000:01:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168g-3.fw (-2)
r8169 0000:01:00.0 eth0: link down

[/code]

_________________
Pupjibaro 1.0.4 2015 / LxpupTahr 15.05.2 - Live USB - Dell D630
Precise 5.7.1 - Full installation - Asus EeePC 701 4G (2 GB RAM)
Carolina Vanguard Frugal /Arch Linux Antergos - Lenovo G4070

Back to top
View user's profile Send private message 
xstylezx

Joined: 14 Nov 2007
Posts: 28

PostPosted: Thu 14 May 2015, 12:03    Post subject:  

Very Happy
peebee wrote:
xstylezx wrote:
Im just curious how to get video thumbnails in pcmanfm?

https://wiki.archlinux.org/index.php/PCManFM#Thumbnail_support says:
Quote:
PCManFM supports image thumbnails out of the box. However, in order to view thumbnails of other file types, PCManFM uses the information provided in the files located at /usr/share/thumbnailers. The packages which provide a thumbnailer usually add the corresponding .thumbnail file at /usr/share/thumbnailers. For example, in order to get thumbnails for OpenDocument files, you may install libgsf from the official repositories. For video files' thumbnails, the package ffmpegthumbnailer is required.

For LxPup (i.e. the Slackware flavour) you can get from:
http://ponce.cc/slackware/slackware-14.1/packages/ffmpegthumbnailer-2.0.9-i486-1ponce.txz

For LxPupTahr - I believe that TahrPup does not include ffmpeg (???) so presumably ffmpegthumbnailer maybe won't work unless ffmpeg is also installed....
666philb wrote:
tahrpup has a fork of ffmpeg called libav.


LxPup does not ship with /usr/share/thumbnailers

Let us know if you get it to work - but please say which flavour of LxPup you are using.

Cheers
peebee



Sorry for the late reply, and thanks for the help.

I dont know how, but I must have overlooked trying the ffmpegthumbnailer in the slacko version as when I loaded that up on the flash drive and installed ffmpegthumbnailer I got the video thumbnails right away, no problems.

I spent a number of hours trying to get the thumbnails on the LxPupTahr version and just could not get it ironed out. I tried installing ffmpeg and the libav but never could iron it out.

I have only one more real problem, and a smaller slightly nagging problem.lol

The big one is I can only get vesa to work for graphics and it is brutal when trying to watch some hi-def videos through smplayer and the like. In smplayer I have to set it to use 4 threads(im on a quad core) so audio is in sync. In carolina vanguard I seem to have an accelerated graphics driver out of the box, gallium maybe, Id have to load it back up to check.

I have an ati graphics card. I did try the 3d option to see if I had other options for drivers, and it reported none for my graphics card, but LxPupTahr had multiple options. Id prefer to use an open source driver so I can pop the flashdrive onto another computer and get basic hardware acceleration out of the box, for the most part.

Im not on the flashdrive at the moment but will post back the glx info as soon as possible.

The other small little issue is chromium not seeming to respect the theme inside of its menus. I fixed that a long time ago with a regular desktop installed distro but I have since forgotten how I did that. I believe its a gtk theme type issue.

Sorry for the long reply. Im just tinkering around with puppy again and have forgot some things.lol Having fun though!
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 44 of 68 [1020 Posts]   Goto page: Previous 1, 2, 3, ..., 42, 43, 44, 45, 46, ..., 66, 67, 68 Next
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies. View previous topic :: View next topic
 Forum index » Advanced Topics » Puppy Derivatives
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.1838s ][ Queries: 13 (0.0169s) ][ GZIP on ]