MicroClient Jr. Reviews.
MicroClient Jr. Reviews.
I was about to purchase a MicroClient Jr. but before I did I wanted to ask a few questions of the people that are already running Puppy on them. They say that it is "fast" and runs "well", but I'm looking for some more specifics. This information may also help other people who are looking for a low cost Puppy PC.
Does the sound work? (I know that the answer is yes to this one)
If sound does work, can it decode an MP3 with out getting choppy?
How long does it take Abiword to open?
How long does it take Open Office to open?
How long does it take Seamonkey to open?
Has anyone purchased the optional built in wireless, and if so, does it work in Puppy?
Since it only has one PS2 port, can you use a "Y" adapter to plug a keyboard and a mouse in at the same time?
How long does it take to boot Puppy 2.12 from the compact flash slot?
What is your best guess "feel" for it to be compared with (Pentium 1 at 200MHz, Pentium II at 300MHz, etc...)?
And are you happy with it?
Thanks for your opinions and advise.
Does the sound work? (I know that the answer is yes to this one)
If sound does work, can it decode an MP3 with out getting choppy?
How long does it take Abiword to open?
How long does it take Open Office to open?
How long does it take Seamonkey to open?
Has anyone purchased the optional built in wireless, and if so, does it work in Puppy?
Since it only has one PS2 port, can you use a "Y" adapter to plug a keyboard and a mouse in at the same time?
How long does it take to boot Puppy 2.12 from the compact flash slot?
What is your best guess "feel" for it to be compared with (Pentium 1 at 200MHz, Pentium II at 300MHz, etc...)?
And are you happy with it?
Thanks for your opinions and advise.
Getting it
Addition: If you're getting one unit, consider http://ewayco.com - just mention when you order that you're a Forum member/Puppy user.
Puppy user since Oct 2004. Want FreeOffice? [url=http://puppylinux.info/topic/freeoffice-2012-sfs]Get the sfs (English only)[/url].
I bought one of these to play music off my server,play internet radio and maybe do a little web surfing in my Out house. So far I have two CF cards one with Win98 an one with the latest 2.12 beta puppy. Being a linux newbie I found it much easier to get everything I want to work under Win98. I used 98Lite for an installer then added Cool Player and Opera 8 as a web browser.
Everything works well, the streaming and and sound are great but the web browsing is very slow which is dissapointing since my music server (gnump3d) uses a web interface.
Under Puppy 2.12 the web is a little faster but still not great. Dillo works very well but I can't get it to open a media player when I click on a music link. The sound works ok but I can't get xine to do everything I want (play recurse.3mu files) so I am playing with xmms.
The minipup distribution is suposed to work with this device but I can't get the sound to work. I havn"t timed seamonkey but it takes a long time to open.
I havn't given up on Puppy for this device but right now I am finding Win98 a bit more usefull on this device. If someone could put together a distribution specificly for this device I think it might be quite good at doing what I want. I think Xmms is more suitable for this device since you won't be playing video on it.
Sorry for the long post, that is my expirience so far.
Everything works well, the streaming and and sound are great but the web browsing is very slow which is dissapointing since my music server (gnump3d) uses a web interface.
Under Puppy 2.12 the web is a little faster but still not great. Dillo works very well but I can't get it to open a media player when I click on a music link. The sound works ok but I can't get xine to do everything I want (play recurse.3mu files) so I am playing with xmms.
The minipup distribution is suposed to work with this device but I can't get the sound to work. I havn"t timed seamonkey but it takes a long time to open.
I havn't given up on Puppy for this device but right now I am finding Win98 a bit more usefull on this device. If someone could put together a distribution specificly for this device I think it might be quite good at doing what I want. I think Xmms is more suitable for this device since you won't be playing video on it.
Sorry for the long post, that is my expirience so far.
Brad,
Thanks for those comments. That's the kind of thing I was looking for. Too bad that web browsing is so slow.
Raffy,
Don't you have a Micro Client Jr.? What are your thoughts on it? Also, I emailed ewayco.com about a week ago and have never heard back from them. Are they associated with norhtec.com? It looks like norhtec.com may be a little easier to order from since you can just place an order with a credit card and don't have to wait for them to email you back with a quote.
Thanks for those comments. That's the kind of thing I was looking for. Too bad that web browsing is so slow.
Raffy,
Don't you have a Micro Client Jr.? What are your thoughts on it? Also, I emailed ewayco.com about a week ago and have never heard back from them. Are they associated with norhtec.com? It looks like norhtec.com may be a little easier to order from since you can just place an order with a credit card and don't have to wait for them to email you back with a quote.
performance with minipup2.12
Dan, I just thought ewayco.com offers a lower price. It is a different distributor, one that is eager to cooperate with the Puppy enthusiasts. I guess that we can support ewayco and do our own Web ecommerce and product support. I saw a while back that Snowdog has tried a small order from ewayco, and we can learn from his experience.
BTW, ewayco's President Steve Freiberger supported the Nov 27 workshop on "Affordable PC for Education and Development" in Manila (see press release, proceedings).
For the minipup, i built a smaller pup_212.sfs (uploading now to http://bexa.org/pup ) and here are the results in my 200-Mhz unit:
Starting to full desktop - 80 seconds
Seamonkey, first/next load - 50/30 seconds (same with running standard Puppy)
Abiword, first/next load - 12/8 seconds
OpenOffice 1.1.4, first/next load - 110/30 seconds (don't close the OpenOffice window; close only the application)
Other info: Yes, the Y-ps2 connection can be used, and MP3 is run well - just listened to Lobster's 4-minute podcast.
I needed Seamonkey only for occasional online editing of webpages, so am OK working long hours with HV3 and Dillo. And all this on a 200-Mhz, 128-MB-RAM machine!
I even opened, test-run and modified my presentation for the APEC Open Source Symposium in Hanoi on Dec 4-6, 2006 (see attached original file).
Tip: Maybe turning Flash off in Seamonkey will make webpage access faster.
BTW, ewayco's President Steve Freiberger supported the Nov 27 workshop on "Affordable PC for Education and Development" in Manila (see press release, proceedings).
For the minipup, i built a smaller pup_212.sfs (uploading now to http://bexa.org/pup ) and here are the results in my 200-Mhz unit:
Starting to full desktop - 80 seconds
Seamonkey, first/next load - 50/30 seconds (same with running standard Puppy)
Abiword, first/next load - 12/8 seconds
OpenOffice 1.1.4, first/next load - 110/30 seconds (don't close the OpenOffice window; close only the application)
Other info: Yes, the Y-ps2 connection can be used, and MP3 is run well - just listened to Lobster's 4-minute podcast.
I needed Seamonkey only for occasional online editing of webpages, so am OK working long hours with HV3 and Dillo. And all this on a 200-Mhz, 128-MB-RAM machine!
I even opened, test-run and modified my presentation for the APEC Open Source Symposium in Hanoi on Dec 4-6, 2006 (see attached original file).
Tip: Maybe turning Flash off in Seamonkey will make webpage access faster.
- Attachments
-
- apec-hanoi.tar.gz
- Presented by Raffy in the Hanoi APEC Symposium on Open Source and Open Course
- (125.07 KiB) Downloaded 1184 times
Puppy user since Oct 2004. Want FreeOffice? [url=http://puppylinux.info/topic/freeoffice-2012-sfs]Get the sfs (English only)[/url].
Raffy,
Thanks for the reply and MiniPups. It looks like the Micro Client Jr. is a bare minimum but usable computer for Puppy. I just wish that ewayco.com was more responsive. Maybe I will try calling them in the morning.
Thanks for the reply and MiniPups. It looks like the Micro Client Jr. is a bare minimum but usable computer for Puppy. I just wish that ewayco.com was more responsive. Maybe I will try calling them in the morning.
Last edited by dvw86 on Mon 11 Dec 2006, 05:39, edited 1 time in total.
-
- Posts: 11
- Joined: Wed 22 Nov 2006, 20:57
I am also interested in the MicroClientJr machine. I ordered one from Norhtec last week and it should arrive sometime soon. I'll happily document my set up process in the hopes that someone else might find it useful. Nortec was prompt and courteous in their reply to my messages and were generally a pleasure to do business with.
With respect to ewayco, I can't recommend buying anything from them.
I found their website as the result of some extensive digging on google (I'm looking for a standard hardware platform for a rather large project) and was impressed with both the selection and prices of their products.
I sent emails requesting quotations on December 3, then again on December 6, and most recently again on the 9th. I have yet to even enjoy the courtesy of a reply.
The products and prices would need to be pretty good to persuade me to endure that sort of rudeness. In my opinion, if you're doing so much business that you can't take the time to reply to a request for a quotation, then you're doing too damned much business, or you don't have enough help. Either problem doesn't recommend the company much from my point of view. I don't need the products or the bargains that bad. Please forgive the tone of aggravation - I simply despise mediocrity in customer service.
Anyway, I'm looking forward to having a go at this MicroClientJr.
With respect to ewayco, I can't recommend buying anything from them.
I found their website as the result of some extensive digging on google (I'm looking for a standard hardware platform for a rather large project) and was impressed with both the selection and prices of their products.
I sent emails requesting quotations on December 3, then again on December 6, and most recently again on the 9th. I have yet to even enjoy the courtesy of a reply.
The products and prices would need to be pretty good to persuade me to endure that sort of rudeness. In my opinion, if you're doing so much business that you can't take the time to reply to a request for a quotation, then you're doing too damned much business, or you don't have enough help. Either problem doesn't recommend the company much from my point of view. I don't need the products or the bargains that bad. Please forgive the tone of aggravation - I simply despise mediocrity in customer service.
Anyway, I'm looking forward to having a go at this MicroClientJr.
- klhrevolutionist
- Posts: 1121
- Joined: Wed 08 Jun 2005, 10:09
I sure would like to look into purchasing a couple of these little things. It seems ewayco is the only one who shows the price. But given the bad review above I am not sure that would be the best option. I visited the site that Barry got a free computer from and they do not show prices either..
Heaven is on the way, until then let's get the truth out!
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
dvw86 & Brad D,
regarding a lightweight web browser,see my post here http://www.murga-linux.com/puppy/viewtopic.php?t=1840
about an old version of Opera.
My enthusiasm about this smaller browser received lukewarm response at the time, but I still think it's a great solution for "processor-challenged" PC's.
Eventually hv3 might be the solution, when it matures.
regarding a lightweight web browser,see my post here http://www.murga-linux.com/puppy/viewtopic.php?t=1840
about an old version of Opera.
My enthusiasm about this smaller browser received lukewarm response at the time, but I still think it's a great solution for "processor-challenged" PC's.
Eventually hv3 might be the solution, when it matures.
Somehow I've missed this thread
Anyway, I got my MCjr a few weeks ago from Norhtec. It didn't come with any documentation, so I searched the net for information.
Here is a summary of the resources and bits of information I have gathered from the net.
First off - Microclient Jr, TU-40 - are they the same? Who makes them?
Well, I know for certain that the Microclient Jr is actually a re-badged eBox-2300, manufactured by DMP in Taiwan. When the Microclient Jr boots, the first screen that comes up includes the text 'eBox-2300'. Most likely, the TU-40 is also a re-badged eBox-2300.
Once I knew the PC was an eBox-2300, I found more info including the User Manual that should have come with the MicroClient Jr:
http://www.embeddedpc.net/doc/eBOX_2300 ... 20v0r0.pdf
One of the eBOX_2300 options is a 802.11b/g wlan Mini-PCI module:
http://www.embeddedpc.net/wirelessoption.htm
This uses the VIA VT6655 wlan chip. (The above page also has a good image of the module and the eBOX_2300 main board.)
Here is a brochure for the VIA VT6655:
http://www.via.com.tw/en/downloads/broc ... 655_en.pdf
Drivers for the VIA VT6655 wlan chip can be downloaded here:
http://www.viaarena.com/default.aspx?Pa ... bCatID=179
From my searches, I also came across a source in the US and one in Germany for the eBOX_2300:
US: http://www.wdlsystems.com/modperl/view_ ... sle_id=799
Germany: http://www.ipc2u.com/catalog/E/EE/34460.html
Note that I have no connection with either of these companies. I'm not even sure if they sell to private individuals or just to companies. If nothing else, they may be able to point to a someone who does
I also came across this amusing item - Microsoft holds an annual embedded competition called 'Imagine Cup'. They apparently use different target hardware each year. For the 2007 competition they will be using - wait for it - the eBOX_2300. Here's the URL:
http://imaginecup.com/Competition/Embed ... tions.aspx
Seems like this little PC may just become a popular item!
Paul
Anyway, I got my MCjr a few weeks ago from Norhtec. It didn't come with any documentation, so I searched the net for information.
Here is a summary of the resources and bits of information I have gathered from the net.
First off - Microclient Jr, TU-40 - are they the same? Who makes them?
Well, I know for certain that the Microclient Jr is actually a re-badged eBox-2300, manufactured by DMP in Taiwan. When the Microclient Jr boots, the first screen that comes up includes the text 'eBox-2300'. Most likely, the TU-40 is also a re-badged eBox-2300.
Once I knew the PC was an eBox-2300, I found more info including the User Manual that should have come with the MicroClient Jr:
http://www.embeddedpc.net/doc/eBOX_2300 ... 20v0r0.pdf
One of the eBOX_2300 options is a 802.11b/g wlan Mini-PCI module:
http://www.embeddedpc.net/wirelessoption.htm
This uses the VIA VT6655 wlan chip. (The above page also has a good image of the module and the eBOX_2300 main board.)
Here is a brochure for the VIA VT6655:
http://www.via.com.tw/en/downloads/broc ... 655_en.pdf
Drivers for the VIA VT6655 wlan chip can be downloaded here:
http://www.viaarena.com/default.aspx?Pa ... bCatID=179
From my searches, I also came across a source in the US and one in Germany for the eBOX_2300:
US: http://www.wdlsystems.com/modperl/view_ ... sle_id=799
Germany: http://www.ipc2u.com/catalog/E/EE/34460.html
Note that I have no connection with either of these companies. I'm not even sure if they sell to private individuals or just to companies. If nothing else, they may be able to point to a someone who does
I also came across this amusing item - Microsoft holds an annual embedded competition called 'Imagine Cup'. They apparently use different target hardware each year. For the 2007 competition they will be using - wait for it - the eBOX_2300. Here's the URL:
http://imaginecup.com/Competition/Embed ... tions.aspx
Seems like this little PC may just become a popular item!
Paul
Methinks Raspberry Pi were ideal for runnin' Puppy Linux
Oh, yes, I also came across this potential lifesaver:
I can also add that this PC has a really nice BIOS and will boot from the network, a USB stick, a USB-CD, a USB-HD, etc (besides the CF card of course). This is in spite of the fact that it only has USB1.1 (3 ports), so booting this way isn't so fast.
To get into the BIOS setup, press <DEL> during boot.
Paul
I haven't tried it, but if you end up with a 'brick', it's worth a tryOn some computers, AMI BIOS can be reset to factory defaults by pressing the end key during boot.
In other words, before soldering out the battery from an eBox-2300 after bricking it with creative BIOS settings, try holding <end> during boot.
I can also add that this PC has a really nice BIOS and will boot from the network, a USB stick, a USB-CD, a USB-HD, etc (besides the CF card of course). This is in spite of the fact that it only has USB1.1 (3 ports), so booting this way isn't so fast.
To get into the BIOS setup, press <DEL> during boot.
Paul
Methinks Raspberry Pi were ideal for runnin' Puppy Linux
Very comprehensive
Very comprehensive information - thanks, Paul.
And there is that added info about MS inviting innovations for the eBox-2300/WinCE 6.0 through a team contest. Pretty smart. That event plays in Puppy's backyard.
For this reason, I nominate you as mentor of a team that will play in another contest - building a Pup optimized for the eBox-2300!
And there is that added info about MS inviting innovations for the eBox-2300/WinCE 6.0 through a team contest. Pretty smart. That event plays in Puppy's backyard.
For this reason, I nominate you as mentor of a team that will play in another contest - building a Pup optimized for the eBox-2300!
Puppy user since Oct 2004. Want FreeOffice? [url=http://puppylinux.info/topic/freeoffice-2012-sfs]Get the sfs (English only)[/url].
Re: Very comprehensive
Raffy, thanks for the nomination but I must decline. I'm certainly willing to help -- just yesterday I wrote a PM to Dougal where I discussed with him about helping you with a MiniPup based on the upcoming Puppy 2.13. Barry has been improving and streamlining many of the scripts - this will certainly benefit the eBox-2300.raffy wrote:For this reason, I nominate you as mentor of a team that will play in another contest - building a Pup optimized for the eBox-2300!
The question in my mind was if there was enough interest to make a special version to run only on the eBox-2300.
Anyway, what I suggest is that we start a new thread where we can collect suggestions for an eventual 'eBoxPup'.
Paul
Methinks Raspberry Pi were ideal for runnin' Puppy Linux
Light Puppy for the ebox
A light Puppy available for the ebox is Puppy 1.02, as it has a Linux 2.6 kernel. Check the download sites from Barry's site: http://puppyos.com/download/downpage.htm
or this http://ftp.nluug.nl/ftp/pub/os/Linux/distr/puppylinux/
The good news is that 1.02's browser behaves (in my Yahoo mail) like Firefox - this must be the early release of Seamonkey.
Some numbers:
- Seamonkey, first/next opening: 30/20 seconds
- Abiword: 13/10 seconds
Oops, the system of 1.02 is OSS - discussion of the sound driver for 1.02 is created at forum.puppylinux.net.
or this http://ftp.nluug.nl/ftp/pub/os/Linux/distr/puppylinux/
The good news is that 1.02's browser behaves (in my Yahoo mail) like Firefox - this must be the early release of Seamonkey.
Some numbers:
- Seamonkey, first/next opening: 30/20 seconds
- Abiword: 13/10 seconds
Oops, the system of 1.02 is OSS - discussion of the sound driver for 1.02 is created at forum.puppylinux.net.
Puppy user since Oct 2004. Want FreeOffice? [url=http://puppylinux.info/topic/freeoffice-2012-sfs]Get the sfs (English only)[/url].
Re: performance with minipup2.12
raffy, can you explain how you decide what to put in the reduced size .sfs file and how you create it. I am just not finding good answers in the wiki or forum.
Cheers,
robin850
Cheers,
robin850
sfs packaging (not really needed for ebox-2300)
Puppy's sfs is packaged like this:
1. make a workdirectory in a linux partition, say "workd"
2. copy whatever you want to put into the sfs, following Puppy's directory structure
(that is, files in /root begin with /root and those in /usr begin with /usr)
3. when everything is in, command in console "mksquashfs workd new.sfs"
Now, to make your smaller Puppy, delete/move those files that you made into sfs, and then remaster Puppy.
CATCH: I discovered that Puppy generally needs more than 128 MB to be fully loaded in memory (even using a trimmed Puppy), so in the case of the ebox-2300 that has only 128 MB RAM, only about half of Puppy gets loaded to RAM. Thus, there is no clear advantage in trimming Puppy for the ebox.
1. make a workdirectory in a linux partition, say "workd"
2. copy whatever you want to put into the sfs, following Puppy's directory structure
(that is, files in /root begin with /root and those in /usr begin with /usr)
3. when everything is in, command in console "mksquashfs workd new.sfs"
Now, to make your smaller Puppy, delete/move those files that you made into sfs, and then remaster Puppy.
CATCH: I discovered that Puppy generally needs more than 128 MB to be fully loaded in memory (even using a trimmed Puppy), so in the case of the ebox-2300 that has only 128 MB RAM, only about half of Puppy gets loaded to RAM. Thus, there is no clear advantage in trimming Puppy for the ebox.
Puppy user since Oct 2004. Want FreeOffice? [url=http://puppylinux.info/topic/freeoffice-2012-sfs]Get the sfs (English only)[/url].
Re: sfs packaging (not really needed for ebox-2300)
Raffy, as a test, I hacked 'init' in initrd.gz and simply commented out *one* line allowing Puppy to load completely into RAM from the CF card. I will make that into a boot option for the cut-down eBoxPup that I'm working on.raffy wrote:CATCH: I discovered that Puppy generally needs more than 128 MB to be fully loaded in memory (even using a trimmed Puppy), so in the case of the ebox-2300 that has only 128 MB RAM, only about half of Puppy gets loaded to RAM. Thus, there is no clear advantage in trimming Puppy for the ebox.
TIP: The eBox-2300 BIOS sets by default shared video memory to 8MB. Change this to 4MB if you are not running video at greater than 1024x768-16. That will give Puppy an extra 4MB RAM
Paul
Methinks Raspberry Pi were ideal for runnin' Puppy Linux
Opening the case on microclient jr?
Curiousity is bugging me to open the case on this. I have tried, but I think something will be damaged. Is there a trick to it?
I wish they would have a dimm slot instead of soldered ram. 128mb ram is just a bit too tight in some cases. Ram is so inexpensive it would be nice to bump up the ram.
cheers,
robin850
I wish they would have a dimm slot instead of soldered ram. 128mb ram is just a bit too tight in some cases. Ram is so inexpensive it would be nice to bump up the ram.
cheers,
robin850
just unscrew
The side (a single C) should fall off after you unscrew the visible screws.
Puppy user since Oct 2004. Want FreeOffice? [url=http://puppylinux.info/topic/freeoffice-2012-sfs]Get the sfs (English only)[/url].
So how to install puppy on that Microclient
Hi. I have also ordered one client. but I have tried to install it using puppy both CF card and USB options. But None of them seems to work.
Using CF card, I just received a flashing dash on screen. Waited for long but nothing came. I installed it using CF-USB cardreader and later move to CF-IDE option.
Using USB, I also did boot up puppy barebone. then use universal installer to create USB bootable. When i mount it to Microclient and used USB-..-FDD to boot. It showed:
Could not find kernel image: linux
Can sb teach me how to get the thing up... So sad
Using CF card, I just received a flashing dash on screen. Waited for long but nothing came. I installed it using CF-USB cardreader and later move to CF-IDE option.
Using USB, I also did boot up puppy barebone. then use universal installer to create USB bootable. When i mount it to Microclient and used USB-..-FDD to boot. It showed:
Could not find kernel image: linux
Can sb teach me how to get the thing up... So sad