The time now is Sun 15 Dec 2019, 10:28
All times are UTC - 4 |
Author |
Message |
James C

Joined: 26 Mar 2009 Posts: 6734 Location: Kentucky
|
Posted: Sun 07 Dec 2014, 01:14 Post subject:
|
|
Regret to report that even after installing the pet... no internet.
Code: | # lsmod
Module Size Used by
iptable_mangle 1512 0
xt_conntrack 2969 4
ipt_REJECT 2401 1
nf_conntrack_ftp 6839 0
nf_conntrack_irc 3683 0
iptable_filter 1352 1
xt_state 1191 0
nf_conntrack_ipv4 7034 4
nf_defrag_ipv4 1331 1 nf_conntrack_ipv4
nf_conntrack 61955 5 xt_state,xt_conntrack,nf_conntrack_ftp,nf_conntrack_irc,nf_conntrack_ipv4
ip_tables 10687 2 iptable_filter,iptable_mangle
snd_hda_codec_via 19422 1
snd_hda_codec_generic 48906 1 snd_hda_codec_via
psmouse 86543 0
snd_pcsp 7694 0
nouveau 1193775 2
mxm_wmi 1395 1 nouveau
wmi 7763 2 mxm_wmi,nouveau
i2c_algo_bit 5127 1 nouveau
ttm 60859 1 nouveau
drm_kms_helper 68690 1 nouveau
k8temp 3402 0
drm 223573 5 ttm,drm_kms_helper,nouveau
hwmon 2962 2 k8temp,nouveau
snd_hda_intel 20459 0
snd_hda_controller 17695 1 snd_hda_intel
snd_hda_codec 79313 4 snd_hda_codec_via,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_pcm_oss 37823 0
snd_mixer_oss 14603 1 snd_pcm_oss
snd_pcm 74487 5 snd_pcm_oss,snd_hda_codec,snd_hda_intel,snd_hda_controller,snd_pcsp
forcedeth 55507 0
snd_seq_dummy 1359 0
snd_seq_oss 27166 0
snd_seq_midi 4880 0
snd_seq_midi_event 5332 2 snd_seq_oss,snd_seq_midi
snd_rawmidi 17246 1 snd_seq_midi
snd_seq 46304 6 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy,snd_seq_midi
snd_seq_device 4972 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_seq_dummy,snd_seq_midi
snd_timer 17152 2 snd_pcm,snd_seq
snd 53671 13 snd_pcm_oss,snd_timer,snd_hda_codec_via,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_oss,snd_seq_device,snd_mixer_oss,snd_pcsp
ohci_pci 2904 0
i2c_nforce2 5063 0
parport_pc 23432 0
parport 29379 1 parport_pc
# modprobe forcedeth
# |
Even after manually loading the driver interface is detected but no internet connection.
Code: | Information about this interface:
Interface: eth0 Driver: forcedeth Bus: pci MacAddress: 00:25:22:61:55:FC
Description: Reverse Engineered nForce ethernet driver |
More testing.....
|
Back to top
|
|
 |
neerajkolte

Joined: 10 Feb 2014 Posts: 517 Location: Pune, India.
|
Posted: Sun 07 Dec 2014, 08:42 Post subject:
|
|
I am getting kernel panic while booting. .Edit: My machine is Intel i3-3220 @3.30GHz, Mobo - Intel DH61BF, Ram- 6Gb.
Booting from 1Gb USB stick using Syslinux.
The same stick also has Tahrpup6, Fatdog631, Fatdog700b2 in their respective folders. All have savefolders on hard drive sda7 partition.
Thanks.
- Neeraj.
_________________ "One of my most productive days was throwing away 1000 lines of code."
- Ken Thompson
“We tend to overestimate the effect of a technology in the short run and underestimate the effect in the long run.”
- Amara’s Law.
|
Back to top
|
|
 |
666philb

Joined: 07 Feb 2010 Posts: 3511 Location: wales
|
Posted: Wed 10 Dec 2014, 12:19 Post subject:
|
|
new iso uploaded
internet fixed (for me at least)
desktop icons fixed
dbus working
gcc working , although i'm still not able to compile the kernel in tahrpup64
i haven't included abiword,mtpaint or gnumeric , if you want them grab them from the PPM ...or download the libreoffice+gimp64.sfs
http://distro.ibiblio.org/puppylinux/puppy-tahr/iso/testing/
_________________ Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
|
Back to top
|
|
 |
666philb

Joined: 07 Feb 2010 Posts: 3511 Location: wales
|
Posted: Wed 10 Dec 2014, 15:13 Post subject:
|
|
one bug that keeps occuring.
in /lib and /usr/lib there are symlinks called 'x86_64-linux-gnu' which are links to the /lib and /usr/lib folders
occasionally when installing something, either manually or from the PPM, the symlink gets overwritten with an actual folder causing catastrophic failure needing hard power off. you then need to boot pfix=ram and delete the folder & .wh file to rescue the save.
does anyone have any ideas why it's happening and how to stop it?
_________________ Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
|
Back to top
|
|
 |
James C

Joined: 26 Mar 2009 Posts: 6734 Location: Kentucky
|
Posted: Wed 10 Dec 2014, 16:53 Post subject:
|
|
I do have working internet out of the box now.
Code: |
# report-video
VIDEO REPORT: tahrpup64, version 6.0.2
Chip description:
VGA compatible controller: NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768x16
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe dri2 exa extmod fb glx kbd mouse shadowfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (381x238 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
|
Code: | # glxgears
1368 frames in 5.0 seconds = 273.574 FPS
1544 frames in 5.0 seconds = 308.610 FPS
1549 frames in 5.0 seconds = 309.449 FPS
1561 frames in 5.0 seconds = 312.186 FPS
|
Code: | # uname -a
Linux puppypc15277 3.17.4 #1 SMP Wed Dec 3 17:48:42 GMT-8 2014 x86_64 x86_64 x86_64 GNU/Linux |
Code: | # free
total used free shared buffers cached
Mem: 3784352 753304 3031048 236256 79352 424120
-/+ buffers/cache: 249832 3534520
Swap: 14540792 0 14540792
# |
|
Back to top
|
|
 |
James C

Joined: 26 Mar 2009 Posts: 6734 Location: Kentucky
|
Posted: Wed 10 Dec 2014, 17:14 Post subject:
|
|
.
Description |
|
Filesize |
57.29 KB |
Viewed |
2172 Time(s) |

|
|
Back to top
|
|
 |
peebee

Joined: 21 Sep 2008 Posts: 4099 Location: Worcestershire, UK
|
Posted: Wed 10 Dec 2014, 17:53 Post subject:
Feebback |
|
Hi 666philb
Downloaded and frugally installed on my HP laptop with Intel graphics.
Booted to desktop - tick.
Rebooted and created savefolder - tick.
Established Broadcom B43 wifi through sns - tick.
Used sfs-load to install Chromium64 - tick.
Ran Chromium64 - tick.
Only problem so far - pfind doesn't work - running in terminal indicated pfilesearch is missing.....
Cheers
peebee
_________________
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
|
Back to top
|
|
 |
666philb

Joined: 07 Feb 2010 Posts: 3511 Location: wales
|
Posted: Wed 10 Dec 2014, 19:09 Post subject:
Re: Feebback |
|
peebee wrote: | Hi 666philb
Downloaded and frugally installed on my HP laptop with Intel graphics.
Booted to desktop - tick.
Rebooted and created savefolder - tick.
Established Broadcom B43 wifi through sns - tick.
Used sfs-load to install Chromium64 - tick.
Ran Chromium64 - tick.
Only problem so far - pfind doesn't work - running in terminal indicated pfilesearch is missing.....
Cheers
peebee |
missed that http://www.murga-linux.com/puppy/viewtopic.php?t=26764
cheers
_________________ Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
|
Back to top
|
|
 |
don570

Joined: 10 Mar 2010 Posts: 5397 Location: Ontario
|
Posted: Wed 10 Dec 2014, 19:20 Post subject:
|
|
Fast download site of tahrpup64 iso
http://ftp.nluug.nl/os/Linux/distr/puppylinux/puppy-tahr/iso/testing/
|
Back to top
|
|
 |
Illutorium
Joined: 06 Aug 2014 Posts: 169
|
Posted: Wed 10 Dec 2014, 21:11 Post subject:
|
|
X.org broken at AMD Radeon HDMI output. (alpha2 as 6.0.2)
In the rest: Works.
|
Back to top
|
|
 |
LateAdopter
Joined: 27 May 2011 Posts: 322 Location: Reading UK
|
Posted: Thu 11 Dec 2014, 09:39 Post subject:
|
|
666philb wrote: | one bug that keeps occuring.
in /lib and /usr/lib there are symlinks called 'x86_64-linux-gnu' which are links to the /lib and /usr/lib folders
occasionally when installing something, either manually or from the PPM, the symlink gets overwritten with an actual folder causing catastrophic failure needing hard power off. you then need to boot pfix=ram and delete the folder & .wh file to rescue the save.
does anyone have any ideas why it's happening and how to stop it? |
When an archive is extracted from a package, it overwrites anything already there without asking.
I'm no linux expert, but I repackaged a load of mesa 10.4 debs for fatdog. The process of extracting all of the data.bz files into a directory tree creates the multiarch folders. For fatdog I had to rearrange and rename the folders anyway to fit the fatdog rules, so it didn't matter.
Presumably the package manager (petget?) code needs to be modified so that it writes the files, but does not create the directories unnecessarily.
EDIT
It could be that you are using busybox and not the real dpkg-deb to do the installation.
Last edited by LateAdopter on Fri 12 Dec 2014, 09:24; edited 1 time in total
|
Back to top
|
|
 |
radky
Joined: 02 May 2010 Posts: 981
|
Posted: Thu 11 Dec 2014, 15:21 Post subject:
Subject description: libperl.so.5.18 error |
|
tahrpup64 pre-alpha
perl: error while loading shared libraries: libperl.so.5.18: cannot open shared object file: No such file or directory
http://packages.ubuntu.com/trusty/amd64/perl-base/download
_________________ PupMates
|
Back to top
|
|
 |
radky
Joined: 02 May 2010 Posts: 981
|
Posted: Thu 11 Dec 2014, 17:10 Post subject:
Subject description: pclock |
|
run pclock 3.5 in terminal, then exit
sh: line 17: echo: write error: Broken pipe
sh: line 18: echo: write error: Broken pipe
|
Back to top
|
|
 |
James C

Joined: 26 Mar 2009 Posts: 6734 Location: Kentucky
|
Posted: Fri 12 Dec 2014, 04:57 Post subject:
|
|
Forgot to mention it last night, "Screeny" the screenshot app produces an empty png file.I installed and used MTpaint for the screenshot in the prior post.
Conky and Dillo also installed and working with no apparent problems.
|
Back to top
|
|
 |
neerajkolte

Joined: 10 Feb 2014 Posts: 517 Location: Pune, India.
|
Posted: Fri 12 Dec 2014, 06:37 Post subject:
|
|
HI,
Tahr64-6.0.2 boots ok on my intel i3, intel Dh61BF, two monitors, one connected to vga another to dvi.
Net connected through my droid usb0.
Will test more.
Thanks.
- Neeraj.
_________________ "One of my most productive days was throwing away 1000 lines of code."
- Ken Thompson
“We tend to overestimate the effect of a technology in the short run and underestimate the effect in the long run.”
- Amara’s Law.
|
Back to top
|
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|