tahrpup 6.0, 6.0.2 & 6.0.5 CE
nvidia 340.58 driver now in quickpet.... use the 'update quickpet' button
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
thanks akshayk, i'll try to enable it in the 3.17 kernel buildakshayk wrote:Hey 666philb, I tried Macpup550 Precise on the VIA Unichrome PRO S3 IGP, and it worked fine with a 1024x768 resolution. (As you had asked which Puppy had worked with my computer)
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
kernel 3.17.4 here to test (hopefully with VIA Unichrome enabled) http://distro.ibiblio.org/puppylinux/pu ... r/kernels/666philb wrote:thanks akshayk, i'll try to enable it in the 3.17 kernel buildakshayk wrote:Hey 666philb, I tried Macpup550 Precise on the VIA Unichrome PRO S3 IGP, and it worked fine with a 1024x768 resolution. (As you had asked which Puppy had worked with my computer)
read the readme.txt
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Will the kernel sources be available? Thanks.666philb wrote:kernel 3.17.4 here to test
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Driver 340.58
Thanks very very much for the divers in quickpet but after installation when I restart the graphical server the only result is a black screen!666philb wrote:nvidia 340.58 driver now in quickpet.... use the 'update quickpet' button
I've to reboot the pc with reboot key.
It's ok the installation of the driver 304.123 (even if after the installation gives an error (see attachment) but After rebooting the driver is working.
Can someone create a sfs file of the driver 340.46, please? I'm not able with my pc becouse, with getnvidia, when I Exit to prompt I've a black screen and pc blocked.
Thanks in advance!
- Attachments
-
- capture3573.png
- (20.09 KiB) Downloaded 573 times
Last edited by vittorio on Sun 23 Nov 2014, 21:25, edited 1 time in total.
uploaded http://distro.ibiblio.org/puppylinux/pet_packages-tahr/peebee wrote:Will the kernel sources be available? Thanks.666philb wrote:kernel 3.17.4 here to test
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
I've the same problems but without solving
Hi luiscuadrado123, you have created a pet file or a sfs file with getnvidia?HELLO EVERYONE!!!!
HELLO!! I AM HAPPY!!!
VERY THANK YOU bigpup FOR YOUR SUPPORT! REALLY THANKS!!
[/b][/color]
WHY IT WORK?
at the moment i read your last post, i did me a coffe, put low music in the room and start it all from start. I reinstall the SO completly... and then i went to the nvidia page and check what drivers i can use.. and then!!! a new drivers appear!! the 340.58!!! since a few days ago!!... i say "Ok, a new driver... why not?"
And this driver work!!!!!!
i did the same i always did!.. download de dev files, the kernel sources, the getnvidia.pet... and it work!!!
i am actually on my TahrPup!.. y tried to play my fuc*** game (the only cause that i need this driver) "Path OF Exile" and it run fine!!!!
Thanks! thanks!!!
I RECOMMEND THAT YOU ADD THIS NEW DRIVER TO QUICKPET!!!
Did you see this?666philb wrote:nvidia 340.58 driver now in quickpet.... use the 'update quickpet' button
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Tahrpup 6.0 CE no pae
Frugal install on hard drive partition
Running with save directory (folder)
Have made no graphic driver changes or downloads.
Using whatever was selected on initial boot.
I have updated Quickpet, so I know there are drivers available in Quickpet for my Nvidia hardware..
Menu->Setup->Video upgrade wizard
It offers nothing for a different driver to use.
Where does this program look for graphics drivers to upgrade with or is it not working?
This is the message I get:
Frugal install on hard drive partition
Running with save directory (folder)
Have made no graphic driver changes or downloads.
Using whatever was selected on initial boot.
I have updated Quickpet, so I know there are drivers available in Quickpet for my Nvidia hardware..
Menu->Setup->Video upgrade wizard
It offers nothing for a different driver to use.
Where does this program look for graphics drivers to upgrade with or is it not working?
This is the message I get:
- Attachments
-
- capture4796.png
- (6.64 KiB) Downloaded 456 times
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Fresh install of Tahrpup 6.0
The first time you run Palemoon browser it opens to the Palemoon start page.
It would be better for a new user if it opened to the Puppy start page
file:///usr/share/doc/home.htm
The first time you run Palemoon browser it opens to the Palemoon start page.
It would be better for a new user if it opened to the Puppy start page
file:///usr/share/doc/home.htm
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Fresh install of Tahrpup 6.0
Quickpet
First time running the Tahrpup bug fixes
The results window gives a small list of installed fixes.
If you go to Quickpet->Help->Installed bug fixes you get a long list of bug fixes.
The help list is what was actually installed at that time.
The results list did not show all the bug fixes that where gotten at that time.
Seems to just show the latest group of bug fixes that have been added to bug fix repository.
Again, this was first time run, So the results list should have shown a long list of bug fixes, downloaded and installed.
Not a big problem, but something to consider possibly fixing..
Quickpet
First time running the Tahrpup bug fixes
The results window gives a small list of installed fixes.
If you go to Quickpet->Help->Installed bug fixes you get a long list of bug fixes.
The help list is what was actually installed at that time.
The results list did not show all the bug fixes that where gotten at that time.
Seems to just show the latest group of bug fixes that have been added to bug fix repository.
Again, this was first time run, So the results list should have shown a long list of bug fixes, downloaded and installed.
Not a big problem, but something to consider possibly fixing..
- Attachments
-
- capture21395.png
- (8.88 KiB) Downloaded 419 times
-
- capture23730.png
- (86.01 KiB) Downloaded 427 times
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
I tried replacing both the files in the live usb and booting it. However, it's the same black screen as before.666philb wrote:kernel 3.17.4 here to test (hopefully with VIA Unichrome enabled) http://distro.ibiblio.org/puppylinux/pu ... r/kernels/666philb wrote:thanks akshayk, i'll try to enable it in the 3.17 kernel buildakshayk wrote:Hey 666philb, I tried Macpup550 Precise on the VIA Unichrome PRO S3 IGP, and it worked fine with a 1024x768 resolution. (As you had asked which Puppy had worked with my computer)
read the readme.txt
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
non us-keyboard bug ?
Hi,
here using tahr-6 PAE with be-latin1 keyboard (french for Belgium)
I have had a «non-us-keyboard-bug» alike problem:
typing character "a" in terminal resulted in "a" in terminal , and "q" in geany;
The md5sums of the tahr6.0.iso and sfs files in it were checked OK.
Same problem if creating a new fresh frugal install.
Things returned OK after deleting both /etc/keymap and /etc/keymap.previuos files; and starting again the Quick-first-run setting.
did someone else already encounter this ?
cheers, charlie
here using tahr-6 PAE with be-latin1 keyboard (french for Belgium)
I have had a «non-us-keyboard-bug» alike problem:
typing character "a" in terminal resulted in "a" in terminal , and "q" in geany;
The md5sums of the tahr6.0.iso and sfs files in it were checked OK.
Same problem if creating a new fresh frugal install.
Things returned OK after deleting both /etc/keymap and /etc/keymap.previuos files; and starting again the Quick-first-run setting.
did someone else already encounter this ?
cheers, charlie
Thanks 666philb666philb wrote:uploaded http://distro.ibiblio.org/puppylinux/pet_packages-tahr/peebee wrote:Will the kernel sources be available? Thanks.666philb wrote:kernel 3.17.4 here to test
I have compiled the Broadcom-STA wl.ko wifi drivers for tahr-3.17.4.....
The non-pae driver compiled "cleanly" with no unexpected messages but the pae driver did compile but produced quite a few warnings whilst doing so.
There is only one devx for tahrpup6.0CE? - in contrast Slacko5.7 has separate pae and non-pae devx's.... http://ftp.nluug.nl/ftp/pub/os/Linux/di ... lacko-5.7/
Just wondering if tahrpup should also have 2 versions of devx?
Interestingly? the pae version installs and works ok on my HP laptop but the non-pae version says:
Thanks# modprobe wl
modprobe: ERROR: could not insert 'wl': Exec format error
# dmesg
wl: disagrees about version of symbol module_layout
peebee
Last edited by peebee on Tue 25 Nov 2014, 18:06, edited 1 time in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Hi @Charlie6
I have seen this problem occur when the system was booted in its beginning and the user overlooked entries in the initial "FirstRUN" screen.
Try this test to validate:
Hope this helps
I have seen this problem occur when the system was booted in its beginning and the user overlooked entries in the initial "FirstRUN" screen.
Try this test to validate:
- Boot your system, pristine (pfix=ram)
- Fill in the FirstRUN screen accurately, including the hostname
- Click OK
- When X returns/restarts, try those keys again.
Hope this helps
Can`t record audio from soundcard .
Cannot check PCM .Also no mixer found .
Have an Intel soundcard .
Retrovol looks like that . Any idea ?
Cannot check PCM .Also no mixer found .
Have an Intel soundcard .
Retrovol looks like that . Any idea ?
- Attachments
-
- capture18803.png
- (18.11 KiB) Downloaded 622 times
hi 666philb
Today I added proper support for VCDs
I played 2 VCDs successfully... all the other CDs were damaged I suppose...
I also noticed that 'damaged' CDs are mistaken for blank CDs, so I added a warning message...
Now this also works as expected in Precise Puppy (pCD, gnomemplayershell). I use the same BASH binary in both precise and tharpup, recently I compiled bash 4.3.30. I think bash 4.1 can handle this script properly.
Anyway... I think all these changes are worth adding to Woof CE. More testing is needed though...
Today I added proper support for VCDs
I played 2 VCDs successfully... all the other CDs were damaged I suppose...
I also noticed that 'damaged' CDs are mistaken for blank CDs, so I added a warning message...
Now this also works as expected in Precise Puppy (pCD, gnomemplayershell). I use the same BASH binary in both precise and tharpup, recently I compiled bash 4.3.30. I think bash 4.1 can handle this script properly.
Anyway... I think all these changes are worth adding to Woof CE. More testing is needed though...
- Attachments
-
- drive_all-1.0-2014-11-25_tahrpup_precise.tar.gz
- (6.86 KiB) Downloaded 156 times
-
- drive_all-1.0-2014-11-25_tahrpup_precise.pet
- (6.94 KiB) Downloaded 163 times
pull requests are always welcomejlst wrote:Anyway... I think all these changes are worth adding to Woof CE. More testing is needed though...
== [url=http://www.catb.org/esr/faqs/smart-questions.html]Here is how to solve your[/url] [url=https://www.chiark.greenend.org.uk/~sgtatham/bugs.html]Linux problems fast[/url] ==
Tahrpup 6 writes something in hd if launched from usb?
Hi, After doing a lot of tests to install nvidia drivers on my notebook with Geforce GT540m (I've tried different drivers and different kernels without success), I've noticed that the problems with nvidiadrivers/xorgwizard are affecting other usb pendrives with other puppy distributions (that were ok and that return ok if setting everything and save a new save file).
It is possible that Turpup writes something (logs or similar) in the hard disc even if I use a pendrive?
In windows is all ok so It is not something "hardware" (I haven't installed new peripherals) even if Windows has reinstalled the touchpad after using Tahrpup with kernel 3.17.4.
How are possible these problems?
Thanks in advance!
It is possible that Turpup writes something (logs or similar) in the hard disc even if I use a pendrive?
In windows is all ok so It is not something "hardware" (I haven't installed new peripherals) even if Windows has reinstalled the touchpad after using Tahrpup with kernel 3.17.4.
How are possible these problems?
Thanks in advance!